Search NASA⌕ Search

SEARCH · Search NASA

Results for “LIFT - PLATES, FLAT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Strake-wing analysis and design

The technology is still evolving for improving the transonic maneuver capability of strake-wing configurations. Much of the work to date has been of an experimental nature; whereas, the theories that are available to handle vortex-flow aerodynamics have mostly treated wings of constant sweep. Hence, two efforts were undertaken. They are: (1) to extend the suction analogy to more general configurations and evaluate the method by using selected critical planforms; and (2) to develop a procedure for strake planform shaping and test the resulting shape in conjunction with a wing-body. The conclusions from this study are that (1) some improvement has been made in estimating high-angle-of-attack longitudinal aerodynamics, and (2) the gothic strake designed with the developed procedure does produce a stable vortex system in the presence of a wing body and flat post-maximum-lift characteristics.

Lamar, J. E.↗
NASA NTRS1986

Wake shape and its effects on aerodynamic characteristics

The wake shape under symmetrical flight conditions and its effects on aerodynamic characteristics are examined. In addition, the effect of wake shape in sideslip and discrete vortices such as strake or forebody vortex on lateral characteristics is presented. The present numerical method for airplane configurations, which is based on discretization of the vortex sheet into vortex segments, verified the symmetrical and asymmetrical roll-up process of the trailing vortices. Also, the effect of wing wake on tail planes is calculated. It is concluded that at high lift the assumption of flat wake for longitudinal and lateral-directional characteristics should be reexamined.

Emdad, H.↗
NASA NTRS1992

An aerodynamic design study of a series of lifting bodies at angles of attack from 10 to 53 degrees at Mach numbers from 2.30 to 4.62

The aerodynamic characteristics in the transition from high to low angles of attack at supersonic speeds have been experimentally and theoretically studied for a series of lifting bodies with various upper and lower surface camber designs. The configurations under consideration have a 75-degree swept delta planform with a rounded nose. Data obtained indicate that changes in the camber design cause some distinct changes in the aerodynamic characteristics that shoud be taken into account in the selection of a lifting body shape. The flat bottom designs with upper surface camber are found to provide greater drag for retardation at high angles of attack but are considerably out of trim longitudinally. The flat top designs with lower surface camber provide less drag at high angles of attack but can be more easily trimmed. Calculated results are found to be in good agreement with the experimental data.

Spearman, M. L.↗
NASA NTRS1954

Aerodynamic characteristics of two flat-bottomed bodies at Mach number of 3.12

The aerodynamic characteristics of two flat-bottomed bodies having a semicircular and a semielliptical cross section have been determined at a Mach number of 3.12 for a range of angles of attack from -10 degrees to 10 degrees and for Reynolds numbers of 8 x 10 (superscript)6 and 14 x 10 (superscript)6 (based on model length). A comparison of the flat-bottomed body characteristics with those previously determined for an equivalent cone-cylinder body of revolution shows that significant increases in lift and lift-drag ratio are obtained with a flat bottom. Additional improvement in lift and lift-drag ratio was achieved at positive angles of attack by expanding the plan form in the spanwise direction.

Jack, John R↗
NASA NTRS1960

Aerodynamic Characteristics at Mach Number 2.05 of a Series of Highly Swept Arrow Wings Employing Various Degrees of Twist and Camber

A series of arrow wings employing various degrees of twist and camber were tested in the Langley 4- by 4-foot supersonic pressure tunnel. Aerodynamic forces and moments in pitch were measured at a Mach number of 2.05 and at a Reynolds number of 4.4 x 10(exp 6) based on the mean aerodynamic chord. Three of the wings, having a leading-edge sweep angle of 70 deg. and an aspect ratio of 2.24, were designed to produce a minimum drag (in comparison with that produced for other wings in the family) at lift coefficients of 0. 0.08, and 0.16. A fourth and a fifth wing, having a 75 deg. swept leading edge and an aspect ratio of 1.65, were designed for lift coefficients of 0 and 0.16, respectively. A 70 deg. swept arrow wing with twist and camber designed for an optimum loading at a lift coefficient considerably less than that for maximum lift-drag ratio gave the highest lift-drag ratio of all the wings tested a value of 8.8 compared with a value of 8.1 for the corresponding wing without twist and camber. Two twisted and cambered wings designed for optimum loading at the lift coefficient for maximum lift-drag ratio gave only small increases in maximum lift-drag ratios over that obtained for the corresponding flat wings. However, in all cases, the lift-drag ratios obtained were far below the theoretical estimates.

Carlson, Harry W.↗
NASA NTRS1976

Flight with lift modulation inside a planetary atmosphere

A set of dimensionless variables (modified Chapman's variables) is introduced in a derivation of general equations for lifting flight and bank modulation within a planetary atmosphere. The atmosphere is assumed spherical and at rest, and a generalized lift-drag polar is also introduced. Corresponding equations for flight over a flat planet model are attained via a straightforward transformation. Two planar flight cases: flight at constant absolute speed over a spherical planet, and flight at constant descent rate over a flat planet, are analyzed, and the required lift control law (with negative or positive lift) is exhibited in each case. Glide at very high descent rate and plane flows of trajectories are analyzed.

Vinh, N. X.↗
NASA NTRS1991

Final design proposal: Theta Group-The Hotbox. A proposal in response to a commercial air transportation study

The Hotbox is a 40 passenger commercial aircraft designed to have a minimum range of 5500 ft and cruise at a velocity of 30 ft/sec. The aircraft is designed to serve the longer range overseas market in Aeroworld. In order to serve all the airports in the overseas market, the Hotbox was required to be able to use a five foot gate. A weight requirement was set a 4.5 lbs in order to maximize aircraft efficiency. Finally, a single engine system was chosen because it minimized system weight, complexity and cost. The Hotbox is estimated to cost $152,000 Aeroworld dollars and will sell for $200.000. The propulsion system for the Hotbox consists of a nose mounted Astro 15 electric powered motor and a Top Flight 12-6 propeller. A Spica airfoil was selected for the Hotbox based on the ease of construction of its flat bottom and its positive lift and drag characteristics. A fuselage of rectangular cross section will internally contain the propulsion system, control system, and a passenger bay with 2x20 seating. A combination of directional and longitudinal control will enable the Hotbox to maneuver. The final design of the Hotbox provides for takeoff distance in 26.5 ft and normal cruise range of 17,000 ft.

Source record↗
NASA NTRS1959

Influence of Large Positive Dihedral on Heat Transfer to Leading Edges of Highly Swept Wings at Very High Mach Numbers

A geometric study has been made of some of the effects of dihedral on the heat transfer to swept delta wings. The results of this study show that the incorporation of large positive dihedral on highly swept wings can shift, even at moderately low angles of attack, the stagnation-line heat-transfer problem from the leading edges to the axis of symmetry (ridge line). An order-of-magnitude analysis (assuming laminar flow) indicates conditions for which it may be possible to reduce the heating at the ridge line (except in the vicinity of the wing apex) to a small fraction of the leading-edge heat transfer of a flat wing at the same lift. Furthermore, conditions are indicated where dihedral reduces the leading-edge heat transfer for angles of attack less than those required to shift the stagnation line from the leading edge to the ridge line.

Cooper, Morton↗
NASA NTRS1993

An initial comparison of CFD with experiment for a geometrically simplified STOVL model

The transition flight performance of a representative Short Take-Off or Vertical Landing (STOVL) model is investigated using side-by-side experimental and numerical simulations. The model consists of a 60 deg cropped delta wing planform; a simple fuselage shape blended to the wing; and tandem, circular, high-pressure-air lift jets that exit perpendicular to the flat lower surface. The configuration was chosen to minimize the geometric modeling complexity while retaining the important flow physics of the lift-jet/aerodynamic surface interaction. Three-dimensional, turbulent Navier-Stokes computations are made using a multiple, overset grid scheme. Results are presented and compared with the measured forces and pressures for the model at a freestream Mach number of 0.14 and a 10 deg angle-of-attack without lift jets operating. Computed surface flow patterns and particle traces show that the simulation predicts primary and secondary wing leading edge vortices for these conditions.

Roth, Karlin R.↗
NASA NTRS1944

Analysis of Experimental Investigations of the Planing Process of the Surface of Water

Pressure distribution and spray measurements were carried out on rectangular flat and V-bottom planing surfaces. Lift, resistance, and center of pressure data are analyzed and it is shown how these values may be computed for the pure planing procees of a flat or V-bottom suface of arbitrary beam, load and speed, the method being illustrated with the aid of an example.

Sottorf, W.↗
NASA NTRS1976

Theoretical and experimental study of twisted and cambered delta wings designed for a Mach number of 3.5

Data are provided for the evaluation of the aerodynamic performance of a series of twisted and cambered delta wings designed for a Mach number of 3.5. Systematic force and pressure data are also presented for comparison with theory. Force tests were made at Mach numbers of 2.3, 3.0, 3.5, 4.0, and 4.6. Design lift coefficients of 0.0 and 0.1 were employed on the 55 deg and 68 deg sweep wings, and design lift coefficients of 0.0, 0.05, and 0.1 were employed on the 76 deg sweep wings. Pressure tests were conducted on the 55 deg and 76 deg sweep flat wings and on the 0.1 design lift coefficient 76 deg sweep wing. The results indicate that for the sweep angles tested, an increase in the zero-lift pitching-moment coefficient is the primary benefit of twist and camber at a Mach number of 3.5. Comparison of the experimental results with results obtained from several lift theories indicates that the Carlson-Middleton linear theory method gave the best overall agreement. The pressure data indicate, however, that there is a cancellation of error at high angle of attack where the lower surface pressures are significantly underpredicted over the inboard region of the wing and where the upper and lower surface pressures are overpredicted over the outboard region of the wing.

Sorrells, R. B., III↗
NASA NTRS1959

Effect of Convex Longitudinal Curvature on the Planing Characteristics of a Surface Without Dead Rise

A hydrodynamic investigation was made in Langley tank no. 1 of a planing surface which was curved longitudinally in the shape of a circular arc with the center of curvature above the model and had a beam of inches and a radius of curvature of 20 beams. The planing surface had length-beam ratio of 9 and an angle of dead rise of 0 deg. Wetted length, resistance, and trimming moment were determined for values of load coefficient C(sub Delta) from -4.2 to 63.9 and values of speed coefficient C(sub V) from 6 to 25. The effects of convexity were to increase the wetted length-beam ratio (for a given lift), to decrease the lift-drag ratio, to move the center of pressure forward, and ta increase the trim for maximum lift-drag ratio as compared with values for a flat surface. The effects were greatest at low trims and large drafts. The maximum negative lift coefficient C(sub L,b) obtainable with a ratio of the radius of curvature to the beam of 20 was -0.02. The effects of camber were greater in magnitude for convexity than for the same amount of concavity.

Mottard, Elmo J.↗
NASA NTRS1993

Interpretation of waverider performance data using computational fluid dynamics

A computational study was conducted to better understand experimental results obtained from wind tunnel tests of a Mach 4 waverider model and a comparative reference configuration. The experimental results showed that the performance of the reference configuration was slightly better than that of the waverider model. These results contradict waverider design theory, which suggests that a waverider optimized for maximum lift-to-drag should provide better performance than any other non-waverider configuration at a given design point, especially at hypersonic speeds. The computational results showed that the predicted surface pressure values and the integrated lift and drag coefficients from the pressure distributions were much lower for the reference model than for the flat-top model, due to the reference model bottom surface having a slight expansion. The lift-to-drag ratios for the flat-top model were higher due to a relatively low drag for the same amount of lift. These results indicate that the performance advantage of the reference model was due to the shape of the bottom surface and not due to the flat top surface. The results also showed that the reference model exhibited the same shock attachment characteristics as the waverider because the planform shapes were identical. CFD predictions show that the planform shape gives the waverider an advantage in performance over conventional hypersonic vehicles and that altering the bottom surface of a waverider does not cause significant performance degradation.

Cockrell, Charles E., Jr.↗
NASA NTRS1993

Interpretation of Waverider Performance Data Using Computational Fluid Dynamics

A computational study was conducted to better understand experimental results obtained from wind tunnel tests of a Mach 4 waverider model and a comparative reference configuration. The experimental results showed that the performance of the reference configuration was slightly better than that of the waverider model. These results contradict waverider design theory, which suggests that a waverider optimized for maximum lift-to-drag should provide better performance than any other non-waverider configuration at a given design point, especially at hypersonic speeds. The computational results showed that the predicted surface pressure values and the integrated lift and drag coefficients from the pressure distributions were much lower for the reference model than for the flat-top model, due to the reference model bottom surface having a slight expansion. The lift-to-drag ratios for the flat-top model were higher due to a relatively low drag for the same amount of lift. These results indicate that the performance advantage of the reference model was due to the shape of the bottom surface and not due to the flat top surface. The results also showed that the reference model exhibited the same shock attachment characteristics as the waverider because the planform shapes were identical. CFD predictions show that the planform shape gives the waverider an advantage in performance over conventional hypersonic vehicles and that altering the bottom surface of a waverider does not cause significant performance degradation.

Cockrell, Charles E., Jr.↗
NASA NTRS1992

Measurements of the flow around a lifting-wing/body junction

Detailed measurements of all three mean velocity components and five of the six Reynolds stresses have been made around a model of a lifting-wing/body junction. The body was the flat working section floor of a small blower wind tunnel. Measurements of the surface pressure distribution on the NACA 0012 wing showed that the lift coefficient at the body surface was reduced by only 16 percent from the freestream value. It is shown that the near constancy of the bound vorticity requires the formation of aixal vorticity within the body boundary layer. This vorticity was concentrated in the two legs of the necklace vortex formed near the leading edge of the wing. The magnitude of the vorticity was always greater in the leg that developed on the suction surface. By four chord lengths downstream of the trailing edge, the turbulence structure of the suction leg was qualitatively similar to that of a single vortex imbedded in a turbulent boundary layer.

Wood, D. H.↗
NASA NTRS1925

Potential flow in engine valves

The extensive applicability of the hydrodynamic theory to the problems of engine construction is clearly shown in the following attempt to determine by exact methods the nature of the flow in valves under variously restricted conditions. Observation shows that two principal kinds of flow occur in simple flat-seated valves. For small valve lifts, the flow is along the horizontal wall and is therefore deflected 90 degrees, but for greater valve lifts the flow separates and forms a free stream, whose angle of deflection naturally increases with increasing lift. Both these kinds of flow can, in fact, be theoretically explained

THEORIES - FLOW - KIRCHOFF AND HELMHOLTZ↗