Search NASA⌕ Search

SEARCH · Search NASA

Results for “LITHIUM PHOSPHATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Channels occupancy and distortion in new lithium uranyl phosphates with three-dimensional open-frameworks

Three new lithium uranyl phosphates, Li{sub 2}(UO{sub 2}){sub 3}(PO{sub 4}){sub 2}O (1), Li(UO{sub 2}){sub 4}(PO{sub 4}){sub 3} (2) and Li{sub 3}(UO{sub 2}){sub 7}(PO{sub 4}){sub 5}O (3) were synthesized and studied. Powders of 1 and 2 were synthesized via solid state reaction, and single crystals of the three compounds were obtained by melting of 1 and 2 powders. The structures of the three compounds have been solved and refined from single crystal X-ray diffraction data. In the three compounds, the uranium atoms occupy square and pentagonal bipyramids. The uranium square bipyramids and phosphate tetrahedra are connected by vertices to form two types of layers with autunite sheet anion-topology {sub i}nfinity{sup 2}[(UO{sub 2})(PO{sub 4}){sub 2}]{sup 4-} and {sub i}nfinity{sup 2}[(UO{sub 2}){sub 2}(PO{sub 4}){sub 3}]{sup 5-}denoted S and D, respectively. The uranyl pentagonal bipyramids share opposite equatorial edges to form {sub i}nfinity{sup 1}[UO{sub 5}]{sup 4-} infinite chains. Mutually perpendicular chains are hung on each side of the sheets to build frameworks with non-crossing perpendicular channels that accommodate the lithium ions. Various stacking sequences of the S and D layers, S-S, D-D and S-D, generate three different frameworks in 1, 2 and 3, respectively. These compounds are similar to the recently reported vanadate analogous. However, the phosphate tetrahedra, smaller than the vanadate ones, gives distortion of the layers and a lowering of the symmetry and/or a change of periodicity. The electrical conductivity of 1 and 2 was measured using impedance spectroscopy method. The rather low conductivity of the lithium cations is explained by the crystal structure and the Li{sup +} position within the tunnels. These results corroborate those on the analogous three-dimensional alkaline uranyl vanadates. Crystallographic data: 293 K, BRUKER X8-APEX2 X-ray diffractometer, 4 K CCD detector, MoKalpha, lambda=0.71073 A, full-matrix least-squares refinement on the basis of F. 1, Tetragonal symmetry, space group I4{sub 1}/amd, Z=4 with a=7.1109(2) A and c=25.0407(8) A, R=0.034 and wR=0.047 for 38 parameters with 479 independent reflections with I>=3sigma(I). 2, monoclinic symmetry, space group P2{sub 1}/c, Z=4 and a=9.8829(2) A, b=9.8909(2) A, c=17.4871(4) A and beta=106.198(1){sup o}, R=0.021 and wR=0.031 for 249 parameters with 4201 independent reflections with I>=3sigma(I). 3, Tetragonal symmetry, space group P4-bar2{sub 1}m with a=9.9305(2) A and c=14.5741(3) A, R=0.035 and wR=0.038 for 137 parameters with 4527 independent reflections with i>=3sigma(I). - Graphical abstract: The three new lithium uranyl phosphates Li{sub 2}(UO{sub 2}){sub 3}(PO{sub 4}){sub 2}O, Li(UO{sub 2}){sub 4}(PO{sub 4}){sub 3} and Li{sub 3}(UO{sub 2}){sub 7}(PO{sub 4}){sub 5}O were synthesised via solid state reaction. The structures of these compounds are based upon three-dimensional open-frameworks built from {sub i}nfinity{sup 1}[UO{sub 5}]{sup 4-} chains connected through two types of layers, S and D, in the sequences S-S, D-D and S-D, respectively. The lithium atoms distribution along the channels induces various distortions of the {sub i}nfinity{sup 1}[UO{sub 5}]{sup 4-} chains.

36 MATERIALS SCIENCE↗

Thermal transport in phase-stabilized lithium zirconate phosphates

The thermal properties of yttrium-stabilized lithium zirconate phosphate [LZP: Li 1+x+y Y x Zr 2-x (PO 4 ) 3 with x = 0.15, -0.2 ≤ y ≤ 0.4 and with x = 0.0, y = 0.0] are presented over a wide temperature range from 30 to 973 K, elucidating the interplay between structural phase transformations and thermal properties in a solid state superionic conducting material. At room temperature, the thermal conductivity decreases by more than 75% as the stoichiometry is changed from lithium deficient to excess and increases with increasing temperature, indicative of defect-mediated transport in the spark plasma sintered materials. The phase transformations and their stabilities are examined by x-ray diffraction and differential scanning calorimetry and indicate that the Y3 + substitution of Zr 4+ is effective in stabilizing the ionically conductive rhombohedral phase over the entire temperature range measured, the mechanism of which is found through ab initio theoretical calculations. Finally, these insights into thermal transport of LZP superionic conductors are valuable as they may be generally applicable for predicting material stability and thermal management in the ceramic electrolyte of future all-solid-state-battery devices.

36 MATERIALS SCIENCE↗

Lattice engineering of high-entropy olivine-type lithium metal phosphate as high-voltage cathodes

Engineering of high-entropy cathode materials for lithium-ion batteries has been actively pursued owing to the outstanding conductivity of high-entropy materials benefited from the maximum entropy and unique antisite disordering structure. Olivine lithium metal phosphates such as LiMnPO 4 and LiNiPO 4 feature high working voltages but low capacities due to their insulation nature. Here in this work, the synthesis of the high-entropy lithium metal phosphate materials (HELMPs) is realized by combining mechanochemistry with a calcination method. By regulating lattice of HELMPs, the high-entropy Li(Mn 0.35 Fe 0.35 Co0.1Mg 0.1 Ca 0.1 )PO 4 reveals three typical high-voltage plateaus in charge–discharge curves corresponding to the redox of Fe, Mn, and Co in the voltage range of 2.0–4.9 V vs Li + /Li, and a much higher initial capacity than LiMnPO 4 (104 vs 15 mAh g -1 ).

25 ENERGY STORAGE↗

Lithium Iron Phosphate Cell Performance Evaluations for Lunar Extravehicular Activities

Lithium-ion battery cells are being evaluated for their ability to provide primary power and energy storage for NASA s future Exploration missions. These missions include the Orion Crew Exploration Vehicle, the Ares Crew Launch Vehicle Upper Stage, Extravehicular Activities (EVA, the advanced space suit), the Lunar Surface Ascent Module (LSAM), and the Lunar Precursor and Robotic Program (LPRP), among others. Each of these missions will have different battery requirements. Some missions may require high specific energy and high energy density, while others may require high specific power, wide operating temperature ranges, or a combination of several of these attributes. EVA is one type of mission that presents particular challenges for today s existing power sources. The Portable Life Support System (PLSS) for the advanced Lunar surface suit will be carried on an astronaut s back during eight hour long sorties, requiring a lightweight power source. Lunar sorties are also expected to occur during varying environmental conditions, requiring a power source that can operate over a wide range of temperatures. Concepts for Lunar EVAs include a primary power source for the PLSS that can recharge rapidly. A power source that can charge quickly could enable a lighter weight system that can be recharged while an astronaut is taking a short break. Preliminary results of Al23 Ml 26650 lithium iron phosphate cell performance evaluations for an advanced Lunar surface space suit application are discussed in this paper. These cells exhibit excellent recharge rate capability, however, their specific energy and energy density is lower than typical lithium-ion cell chemistries. The cells were evaluated for their ability to provide primary power in a lightweight battery system while operating at multiple temperatures.

Reid, Concha↗

Temperature and processing effects on lithium ion conductivity of solution‐deposited lithium zirconium phosphate (LiZr 2 P 3 O 12 ) thin films

Abstract Lithium zirconium phosphate (LiZr 2 P 3 O 12 ) thin films have been prepared on platinized silicon substrates via a chemical solution deposition approach with processing temperatures between 700°C and 775°C. Films that were subject to a single high‐temperature anneal were found to crystallize at temperatures above 725°C. Crystallization was observed in films annealed after each deposited layer at 700°C and above. In both cases, grain size was found to increase with annealing temperature. Ion conductivity was found to increase with annealing temperature in singly annealed films. In per‐layer annealed films ion conductivity was found to initially increase then decrease with increasing annealing temperature. A maximum ion conductivity of 1.6 × 10 −6 S/cm was observed for the singly annealed 775°C condition, while a maximum ion conductivity of 5.8 × 10 −7 S/cm was observed for the 725°C per‐layer annealed condition. These results are consistent with an increasing influence of cross‐plane, internal interface resistance and vapor phase carrier loss in the per‐layer annealed samples. This work demonstrates that post‐deposition processing methods can strongly affect the ion conducting properties of LiZr 2 P 3 O 12 thin films.

Brummel, Ian A.↗

Solid-State Chemistries Stable with High-Energy Cathodes for Lithium-Ion Batteries

In the pursuit of higher-energy-density lithium-ion batteries, one big challenge is the stability of high-capacity or high-voltage cathodes with electrolytes. An understanding of how different chemistries interact with high-energy cathodes is required to enable the rational design of coatings or solid electrolyte materials that offer long-term stability with the cathode. Herein, we systematically evaluated the thermodynamic stability among a broad range of solid-state chemistries with common cathodes. Our thermodynamic analyses confirmed that the strong reactivity of lithiated and delithiated cathodes greatly limits the possible choice of materials that are stable with the cathode under voltage cycling. Our computation reaffirmed previously demonstrated coating and solid electrolyte chemistries and suggested several new stable chemistries. In particular, the lithium phosphates and lithium ternary fluorides, which have high oxidation limits, are promising solid-state chemistries stable with high-voltage cathodes. Our research offers guiding principles for selecting materials with long-term stability with high-energy cathodes for next-generation lithium-ion batteries.

25 ENERGY STORAGE↗

Prospects for Employing Lithium Copper Phosphates as High-Voltage Li-Ion Cathodes

Three compositions of lithium copper phosphates: Li 2 CuPO 4 , Li 2 Cu 5 (PO 4 ) 4 , and Li 2 CuP 2 O 7 have been studied as potential high-voltage cathode materials for Li-ion batteries, following computational predictions of high operating voltages. An assisted-microwave preparation of Li 2 CuPO 4 , which is otherwise difficult to prepare in nearly pure form, has been developed. The electrochemical performance of all three compounds has been investigated. Additionally, the cyclability of these materials is found to be poor due to structural changes, irreversible reduction to metallic copper at potentials as high as 2.5 V, and the possibility of dissolution into the electrolyte. Some general understanding in regard to the use of Cu compounds in redox electrodes is presented.

25 ENERGY STORAGE↗

Synthesis and crystal structure of a novel lithium bismuth phosphate, Li{sub 2}Bi{sub 14.67}(PO{sub 4}){sub 6}O{sub 14}

A lithium bismuth phosphate, Li{sub 2}Bi{sub 14.67}(PO{sub 4}){sub 6}O{sub 14}, has been synthesized for the first time by the solid-state method. The crystal structure was determined by single crystal X-ray diffraction at 150 K. Li{sub 2}Bi{sub 14.67}(PO{sub 4}){sub 6}O{sub 14} crystallizes in the monoclinic system C2/c (No. 15), with a = 30.8189(4) A, b = 5.2691(3) A, c = 24.5302(3) A, {beta} 122.84(2){sup o}, V = 3346.81(1) A{sup 3} and Z = 2. The structure along the b axis consists of layers of [Bi{sub 2}O{sub 2}] units as the basic building block. These are separated by isolated PO{sub 4} and LiO{sub 4} tetrahedra. The oxygen co-ordination around two of the phosphorus atoms is disordered. Solid-state {sup 7}Li NMR studies confirm the presence of lithium in the structure. The material shows ionic conductivity of the order of 10{sup -5} S cm{sup -1} at 600 deg. C.

36 MATERIALS SCIENCE↗

Degradation of Lithium Iron Phosphate Sulfide Solid-State Batteries by Conductive Interfaces

The superionic solid-state argyrodite electrolyte Li 6 PS 5 Br can improve lithium and lithium-ion batteries' safety and energy density. Despite many reports validating the conductivity of this electrolyte, it still suffers from passivating electrode degradation mechanisms. At first analysis, lithium iron phosphate (LFP) should be more thermodynamically stable in contact with sulfide electrolytes. However, without substantial improvements to interfacial engineering, we find that LFP is not inherently stable against Li 6 PS 5 Br. We hypothesize argyrodite oxidation favorably competes with LFPAs delithiation, insulating the electrolyte-electrode interface and causing large overpotential losses. We show that compared to LiNi x Mn y Co z O 2 , LFP has no actual electrochemical stability advantage despite operating at a lower voltage. We utilize tender energy XAS and XPS to show that chemical reactions occur between LFP and the Li 6 PS 5 Br solid electrolyte and these reactions are exacerbated by cycling. We also show that electrochemical degradation occurs at the interface between the solid electrolyte ion conductor and any electron conductor, namely the active material and carbon additives. We further demonstrate that LiNbO 3 cathode coatings on LFP can delay electrochemical degradation by electronically insulating the LFP-sulfide electrolyte interface but not prevent its occurrence at the carbon-electrolyte interface.

25 ENERGY STORAGE↗

Asynchronous Stoichiometric Response in Lithium Iron Phosphate Batteries

The operando energy-dispersive x-ray diffraction (EDXRD) was carried out on a newly formed 8 Ah lithium iron phosphate (LiFePO4) battery with the goal of elucidating the origin of asynchronous phase transformation commonly seen with in situ x-ray diffraction studies. The high-energy photons at the NSLS X17B1 beamline allow for penetration into a fully assembled battery and therefore negate any need for a specially designed in situ cell which often uses modified current collectors to minimize x-ray attenuation. Spatially-and-temporally resolved phase-mapping was conducted with a semiquantitative reference intensity ratio (RIR) analysis to estimate the relative abundance of the delithiated phase. The data show an asynchronous response in the stoichiometry versus the electrochemical profile and suggest limited diffusion in the electrode toward the end of discharge. These results confirm that the asynchronous electrode response is not just limited to specially designed cells but occurs in fully assembled cells alike. We attribute this behavior to be a consequence of performing a local measurement over a wide-area heterogeneous reaction.

25 ENERGY STORAGE↗

Comprehensive Modeling of Temperature-Dependent Degradation Mechanisms in Lithium Iron Phosphate Batteries

For reliable lifetime predictions of lithium-ion batteries, models for cell degradation are required. A comprehensive semi-empirical model based on a reduced set of internal cell parameters and physically justified degradation functions for the capacity loss is developed and presented for a commercial lithium iron phosphate/graphite cell. One calendar and several cycle aging effects are modeled separately. Emphasis is placed on the varying degradation at different temperatures. Degradation mechanisms for cycle aging at high and low temperatures as well as the increased cycling degradation at high state of charge are calculated separately.For parameterization, a lifetime test study is conducted including storage and cycle tests. Additionally, the model is validated through a dynamic current profile based on real-world application in a stationary energy storage system revealing the accuracy. The model error for the cell capacity loss in the application-based tests is at the end of testing below 1 % of the original cell capacity.

25 ENERGY STORAGE↗

Comprehensive Modeling of Temperature-Dependent Degradation Mechanisms in Lithium Iron Phosphate Batteries

For reliable lifetime predictions of lithium-ion batteries, models for cell degradation are required. A comprehensive semi-empirical model based on a reduced set of internal cell parameters and physically justified degradation functions for the capacity loss is developed and presented for a commercial lithium iron phosphate/graphite cell. One calendar and several cycle aging effects are modeled separately. Emphasis is placed on the varying degradation at different temperatures. Degradation mechanisms for cycle aging at high and low temperatures as well as the increased cycling degradation at high state of charge are calculated separately. For parameterization, a lifetime test study is conducted including storage and cycle tests. Additionally, the model is validated through a dynamic current profile based on real-world application in a stationary energy storage system revealing the accuracy. Tests for validation are continued for up to 114 days after the longest parametrization tests. In conclusion, the model error for the cell capacity loss in the application-based tests is at the end of testing below 1% of the original cell capacity and the maximum relative model error is below 21%.

25 ENERGY STORAGE↗

Lithium tetrafluoro oxalato phosphate as electrolyte additive for lithium-ion cells.

Lithium tetrafluoro oxalato phosphate (LTFOP) was investigated as an electrolyte additive to improve the life of mesocarbon microbead (MCMB)/Li{sub 1.1}[Ni{sub 1/3}Co{sub 1/3}Mn{sub 1/3}]{sub 0.9}O{sub 2} (NCM) cells for high power applications. With the addition of 1-3 wt % LTFOP to MCMB/NCM cells, the capacity retention after 200 cycles at 55 C significantly improved. Electrochemical impedance spectroscopy showed that the LTFOP addition in the electrolyte increased the initial impedance but lowered the impedance growth rate during cycling. Aging tests at 55 C indicated that the capacity retention of the negative electrode significantly benefited as a result of the LTFOP addition. Differential scanning calorimetry showed that the safety of the lithiated MCMB is significantly improved with the LTFOP addition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Topotactic insertion of lithium in the layered structure Li{sub 4}VO(PO{sub 4}){sub 2}: The tunnel structure Li{sub 5}VO(PO{sub 4}){sub 2}

A new V(III) lithium phosphate Li{sub 5}VO(PO{sub 4}){sub 2} has been synthesized by electrochemical insertion of lithium into Li{sub 4}VO(PO{sub 4}){sub 2}. This phase, which crystallizes in the space group I4/mcm, exhibits a tunnel structure closely related to the layered structure of Li{sub 4}VO(PO{sub 4}){sub 2} and to the tunnel structure of VO(H{sub 2}PO{sub 4}){sub 2}. The topotactic reactions that take place during lithium exchange and intercalation, starting from VO(H{sub 2}PO{sub 4}){sub 2} and going to the final phase Li{sub 5}VO(PO{sub 4}){sub 2} are explained on the basis of the flexible coordinations of V{sup 4+} and V{sup 3+} species. The electrochemical and magnetic properties of this new phase are also presented and explained on the basis of the structure dimensionality. - Graphical abstract: Electrochemical synthesis of a new 3D V(III) lithium phosphate, Li{sub 5}VO(PO{sub 4}){sub 2}. Starting from the 2D Li{sub 4}VO(PO{sub 4}){sub 2}, the topotactic reaction that take place during lithium intercalation is explained on the basis of the flexible coordinations of V{sup 4+} and V{sup 3+} species.

36 MATERIALS SCIENCE↗

Overpotential-Dependent Phase Transformation Pathways in Lithium Iron Phosphate Battery Electrodes

An objective in battery development for higher storage energy density is the design of compounds that can accommodate maximum ion concentration change over useful electrochemical windows. Not surprisingly, many storage compounds undergo phase transitions in-situ, including production of metastable phases. Unique to this environment is the frequent application of electrical over- and underpotentials, which are the electrical analogs to undercooling and superheating. Surprisingly, overpotential effects on phase stability and transformation mechanisms have not been studied in detail. Here we use synchrotron X-ray diffraction performed in-situ during potentiostatic and galvanostatic cycling, combined with phase-field modeling, to reveal a remarkable dependence of phase transition pathway on overpotential in the model olivine Li1-xFePO4. At both low (e.g., <20 mV) and high (>75 mV) overpotentials a crystal-to-crystal olivine transformation is preferred, whereas at intermediate overpotentials a crystalline-to-amorphous phase transition dominates. At nanoscale particle size, amorphization is further emphasized. Implications for battery use and design are considered.

43 PARTICLE ACCELERATORS↗

Carbon dioxide sensor

The present invention generally relates to carbon dioxide (CO.sub.2) sensors. In one embodiment, the present invention relates to a carbon dioxide (CO.sub.2) sensor that incorporates lithium phosphate (Li.sub.3PO.sub.4) as an electrolyte and sensing electrode comprising a combination of lithium carbonate (Li.sub.2CO.sub.3) and barium carbonate (BaCO.sub.3). In another embodiment, the present invention relates to a carbon dioxide (CO.sub.2) sensor has a reduced sensitivity to humidity due to a sensing electrode with a layered structure of lithium carbonate and barium carbonate. In still another embodiment, the present invention relates to a method of producing carbon dioxide (CO.sub.2) sensors having lithium phosphate (Li.sub.3PO.sub.4) as an electrolyte and sensing electrode comprising a combination of lithium carbonate (Li.sub.2CO.sub.3) and barium carbonate (BaCO.sub.3).

47 OTHER INSTRUMENTATION↗

Synthesis and Characterization of Lithium Manganese Phosphate by a precipitation method

LiMnPO4 is synthesized from MnPO4•H2O precursor precipitated via a spontaneous reaction. These MnPO4•H2O nano-plates react quickly with the lithium source and form a pure phase of LiMnPO4 that has good electrochemical properties. Thermogravimetric analysis (TGA) was used to determine the optimum synthesis temperature. It is found that the crystallization of LiMnPO4 occurs before 438°C. After full nucleation at 550°C, the samples exhibit a discharge capacity of 115mAh/g (C/20 rate, 2.5-4.4 V) in the first cycle. The Coulombic efficiency is maintained at near 100% after the first few cycles.When the synthesis temperature decreases to 350°C, the particle size of the LiMnPO4 is further reduced to 10-50 nm with a reversible capacity of more than 90 mAh/g. For 550°C-synthesized LiMnPO4, 73% of the initial capacity is retained at the sixtieth cycle. After high rate (5C) discharge, the reversible capacity of the LiMnPO4 can be recovered to nearly the original value of 110 mAh/g at the C/20 rate. This precipitation method provides a cost effective approach for manufacturing high-performance LiMnPO4 cathode material for Li-ion batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lithium metal negative electrode and method of manufacturing the same

A negative electrode for an electrochemical cell of a secondary lithium metal battery is manufactured by a method in which a precursor solution is applied to a major surface of a lithium metal substrate to form a precursor coating thereon. The precursor solution includes an organophosphate, a nonpolar organic solvent, and a lithium-containing inorganic ionic compound dissolved therein. At least a portion of the nonpolar organic solvent is removed from the precursor coating to form a protective interfacial layer on the major surface of the lithium metal substrate. The protective interfacial layer exhibits a composite structure including a carbon-based matrix component and a lithium-containing dispersed component. The lithium-containing dispersed component is embedded in the carbon-based matrix component and includes a plurality of lithium-containing inorganic ionic compounds, e.g., lithium phosphate (Li3PO4) and lithium nitrate (LiNO3).

Xiao, Xingcheng↗