Search NASA⌕ Search

SEARCH · Search NASA

Results for “Lagrangian particle tracking”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Efficient bi-directional coupling of 3D computational fluid-particle dynamics and 1D Multiple Path Particle Dosimetry lung models for multiscale modeling of aerosol dosimetry

The development of predictive aerosol dosimetry models has been a major focus of environmental toxicology and pharmaceutical health research for decades. One-dimensional (1D) models successfully predict overall deposition averages but fail to accurately predict local deposition. Computational fluid-particle dynamics (CFPD) models provide site-specific predictions but at a computational cost that prohibits whole lung predictions. Thus, there is a need for developing multiscale strategies to provide a realistic subject-specific picture of the fate of inhaled aerosol in the lungs. CT-based 3D/CFPD models of the large airways were bidirectionally coupled with individualized 1D Navier-Stokes airflow and particle transport based upon the widely used Multiple Path Particle Dosimetry Model (MPPD). Distribution of airflows among lobes was adjusted by measured lobar volume changes observed in CT images between FRC and FRC + 1.5 L. Additionally, as a test of the effectiveness of the coupling procedures, deposition modeling of previous 1 µm aerosol exposure studies was performed. The complete coupled model was run for 3 breaths, with the computation-intense portion being the 3D CFD Lagrangian particle tracking calculation. The average deposition per breath was 11% in the combined multiscale model with site-specific doses available in the CFPD portion of the model and airway- or region-specific deposition available for the MPPD portion. In conclusion, the key methods developed in this study enable predictions of ventilation heterogeneities and aerosol deposition across the lungs that are not captured by 3D or 1D models alone. Overall, these methods can be used as the foundation for multi-scale modeling of the full respiratory system.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

The Influence of Ocean Topography on the Upwelling of Carbon in the Southern Ocean

The physical circulation of the Southern Ocean sets the surface concentration and thus air-sea exchange of CO 2 . However, we have a limited understanding of the three-dimensional circulation that brings deep carbon-rich waters to the surface. Here, we introduce and analyze a novel high-resolution ocean model simulation with active biogeochemistry and online Lagrangian particle tracking. We focus our attention on a subset of particles with high dissolved inorganic carbon (DIC) that originate below 1,000 m and eventually upwell into the near-surface layer (upper 200 m). We find that 71% of the DIC-enriched water upwelling across 1,000 m is concentrated near topographic features, which occupy just 33% of the Antarctic Circumpolar Current. Once particles upwell to the near-surface layer, they exhibit relatively uniform pCO 2 levels and DIC decorrelation timescales, regardless of their origin. Furthermore, our results show that Southern Ocean bathymetry plays a key role in delivering carbon-rich waters to the surface.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Direct numerical simulations of activation and deactivation in turbulent atmospheric clouds

Significant knowledge gaps remain in our understanding of turbulence–cloud–aerosol interactions in the Earth's atmosphere, and direct numerical simulation (DNS) has increasingly become an indispensable tool to fill such critical knowledge gaps. Here, this study is an extension of our previous DNS model [Gao et al., J. Geophys. Res.: Atmos., 123(4), 2194–2214 (2018)], with a focus on the activation of aerosol particles into cloud droplets and deactivation of cloud droplets into aerosol particles in a microscale cloud environment. The effects of turbulence intensity, particle curvature, and solute, as well as the initial distributions of the aerosol particles (monodisperse or polydisperse) are investigated. The governing equations for the flow of air, temperature, and water vapor mixing ratio are solved numerically in the Eulerian fashion, assuming homogeneous and isotropic turbulence. The dynamics of the aerosol and cloud particles are calculated with the Lagrangian particle tracking method. The results show that the deviations of the thermodynamic variables from their respective means are significantly reduced, the activation process appears to be delayed, and the deactivation process occurs more rapidly, as the turbulence intensity is increased. The inclusion of particle curvature and solute effects, as well as polydispersity, tends to retard the activation of aerosols into cloud droplets. It is also observed that fluctuations in supersaturation broaden the spread of particle radii, and the broadening is followed by a narrowing as turbulent homogenization reduces thermodynamic fluctuations over time.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Energy Exascale Computational Fluid Dynamics Simulations With the Spectral Element Method

Development and application of the open-source GPU-based fluid-thermal simulation code, NekRS, are described. Time advancement is based on an efficient kth-order accurate timesplit formulation coupled with scalable iterative solvers. Spatial discretization is based on the high-order spectral element method (SEM), which affords the use of fast, low-memory, matrix-free operator evaluation. Further, recent developments include support for nonconforming meshes using overset grids and for GPU-based Lagrangian particle tracking. Results of large-eddy simulations of atmospheric boundary layers for wind-energy applications as well as extensive nuclear energy applications are presented.

42 ENGINEERING↗
DOE OSTI2025

AIVT: Inference of turbulent thermal convection from measured 3D velocity data by physics-informed Kolmogorov-Arnold networks

We propose the artificial intelligence velocimetry-thermometry (AIVT) method to reconstruct a continuous and differentiable representation of the temperature and velocity in turbulent convection from measured three-dimensional (3D) velocity data. AIVT is based on physics-informed Kolmogorov-Arnold networks and trained by optimizing a loss function that minimizes residuals of the velocity data, boundary conditions, and governing equations. We apply AIVT to a set of simultaneously measured 3D temperature and velocity data of Rayleigh-Bénard convection, obtained by combining particle image thermometry and Lagrangian particle tracking. This enables us to directly compare machine learning results to true volumetric, simultaneous temperature and velocity measurements. We demonstrate that AIVT can reconstruct and infer continuous, instantaneous velocity and temperature fields and their gradients from sparse experimental data at a high resolution, providing an additional approach for understanding thermal turbulence.

Science & Technology - Other Topics↗
NASA NTRS1992

Overview of the relevant CFD work at Thiokol Corporation

An in-house developed proprietary advanced computational fluid dynamics code called SHARP (Trademark) is a primary tool for many flow simulations and design analyses. The SHARP code is a time dependent, two dimensional (2-D) axisymmetric numerical solution technique for the compressible Navier-Stokes equations. The solution technique in SHARP uses a vectorizable implicit, second order accurate in time and space, finite volume scheme based on an upwind flux-difference splitting of a Roe-type approximated Riemann solver, Van Leer's flux vector splitting, and a fourth order artificial dissipation scheme with a preconditioning to accelerate the flow solution. Turbulence is simulated by an algebraic model, and ultimately the kappa-epsilon model. Some other capabilities of the code are 2-D two-phase Lagrangian particle tracking and cell blockages. Extensive development and testing has been conducted on the 3-D version of the code with flow, combustion, and turbulence interactions. The emphasis here is on the specific applications of SHARP in Solid Rocket Motor design. Information is given in viewgraph form.

Chwalowski, Pawel↗
NASA NTRS1996

Numerical Investigation of Two-Phase Flows With Charged Droplets in Electrostatic Field

A numerical method to solve two-phase turbulent flows with charged droplets in an electrostatic field is presented. The ensemble-averaged Navier-Stokes equations and the electrostatic potential equation are solved using a finite volume method. The transitional turbulence field is described using multiple-time-scale turbulence equations. The equations of motion of droplets are solved using a Lagrangian particle tracking scheme, and the inter-phase momentum exchange is described by the Particle-In-Cell scheme. The electrostatic force caused by an applied electrical potential is calculated using the electrostatic field obtained by solving a Laplacian equation and the force exerted by charged droplets is calculated using the Coulombic force equation. The method is applied to solve electro-hydrodynamic sprays. The calculated droplet velocity distributions for droplet dispersions occurring in a stagnant surrounding are in good agreement with the measured data. For droplet dispersions occurring in a two-phase flow, the droplet trajectories are influenced by aerodynamic forces, the Coulombic force, and the applied electrostatic potential field.

Kim, Sang-Wook↗
NASA NTRS2014

One Dimensional Analysis Model of a Condensing Spray Chamber Including Rocket Exhaust Using SINDA/FLUINT and CEA

Modeling droplet condensation via CFD codes can be very tedious, time consuming, and inaccurate. CFD codes may be tedious and time consuming in terms of using Lagrangian particle tracking approaches or particle sizing bins. Also since many codes ignore conduction through the droplet and or the degradating effect of heat and mass transfer if noncondensible species are present, the solutions may be inaccurate. The modeling of a condensing spray chamber where the significant size of the water droplets and the time and distance these droplets take to fall, can make the effect of droplet conduction a physical factor that needs to be considered in the model. Furthermore the presence of even a relatively small amount of noncondensible has been shown to reduce the amount of condensation. It is desirable then to create a modeling tool that addresses these issues. The path taken to create such a tool is illustrated. The application of this tool and subsequent results are based on the spray chamber in the Spacecraft Propulsion Research Facility (B2) located at NASA's Plum Brook Station that tested an RL-10 engine. The platform upon which the condensation physics is modeled is SINDAFLUINT. The use of SINDAFLUINT enables the ability to model various aspects of the entire testing facility, including the rocket exhaust duct flow and heat transfer to the exhaust duct wall. The ejector pumping system of the spray chamber is also easily implemented via SINDAFLUINT. The goal is to create a transient one dimensional flow and heat transfer model beginning at the rocket, continuing through the condensing spray chamber, and finally ending with the ejector pumping system. However the model of the condensing spray chamber may be run independently of the rocket and ejector systems detail, with only appropriate mass flow boundary conditions placed at the entrance and exit of the condensing spray chamber model. The model of the condensing spray chamber takes into account droplet conduction as well as the degrading effect of mass and heat transfer due to the presence of noncondensibles. The one dimension model of the condensing spray chamber makes no presupposition on the pressure profile within the chamber, allowing the implemented droplet physics of heat and mass transfer coupled to the SINDAFLUINT solver to determine a transient pressure profile of the condensing spray chamber. Model results compare well to the RL-10 engine pressure test data.

Chemical Equilibrium↗
NASA NTRS2014

One Dimensional Analysis Model of a Condensing Spray Chamber Including Rocket Exhaust Using SINDA/FLUINT and CEA

Modeling droplet condensation via CFD codes can be very tedious, time consuming, and inaccurate. CFD codes may be tedious and time consuming in terms of using Lagrangian particle tracking approaches or particle sizing bins. Also since many codes ignore conduction through the droplet and or the degradating effect of heat and mass transfer if noncondensible species are present, the solutions may be inaccurate. The modeling of a condensing spray chamber where the significant size of the water droplets and the time and distance these droplets take to fall, can make the effect of droplet conduction a physical factor that needs to be considered in the model. Furthermore the presence of even a relatively small amount of noncondensible has been shown to reduce the amount of condensation [Ref 1]. It is desirable then to create a modeling tool that addresses these issues. The path taken to create such a tool is illustrated. The application of this tool and subsequent results are based on the spray chamber in the Spacecraft Propulsion Research Facility (B2) located at NASA's Plum Brook Station that tested an RL-10 engine. The platform upon which the condensation physics is modeled is SINDAFLUINT. The use of SINDAFLUINT enables the ability to model various aspects of the entire testing facility, including the rocket exhaust duct flow and heat transfer to the exhaust duct wall. The ejector pumping system of the spray chamber is also easily implemented via SINDAFLUINT. The goal is to create a transient one dimensional flow and heat transfer model beginning at the rocket, continuing through the condensing spray chamber, and finally ending with the ejector pumping system. However the model of the condensing spray chamber may be run independently of the rocket and ejector systems detail, with only appropriate mass flow boundary conditions placed at the entrance and exit of the condensing spray chamber model. The model of the condensing spray chamber takes into account droplet conduction as well as the degrading effect of mass and heat transfer due to the presence of noncondensibles. The one dimension model of the condensing spray chamber makes no presupposition on the pressure profile within the chamber, allowing the implemented droplet physics of heat and mass transfer coupled to the SINDAFLUINT solver to determine a transient pressure profile of the condensing spray chamber. Model results compare well to the RL-10 engine pressure test data.

Condensing Spray Model↗
NASA NTRS2015

Preliminary Numerical and Experimental Analysis of the Spallation Phenomenon

The spallation phenomenon was studied through numerical analysis using a coupled Lagrangian particle tracking code and a hypersonic aerothermodynamics computational fluid dynamics solver. The results show that carbon emission from spalled particles results in a significant modification of the gas composition of the post shock layer. Preliminary results from a test-campaign at the NASA Langley HYMETS facility are presented. Using an automated image processing of high-speed images, two-dimensional velocity vectors of the spalled particles were calculated. In a 30 second test at 100 W/cm2 of cold-wall heat-flux, more than 1300 particles were detected, with an average velocity of 102 m/s, and most frequent observed velocity of 60 m/s.

Martin, Alexandre↗
NASA NTRS2019

Numerical Predictions of Dust-Induced Heat Flux Augmentation in Hypersonic Blunt-Body Flows Using a Discontinuous Galerkin Multiphase Flow Solver

Recent interest in human-scale missions to Mars has motivated the need for high-fidelity simulations of reentry flows. During a dust storm, there can be high levels of suspended dust in the Martian atmosphere, which cannot only enhance erosion of thermal protection systems but also transfer energy and momentum to the shock layer, thereby significantly augmenting the surface heat flux. Second-order finite-volume schemes are typically employed for hypersonic flow simulations, but such schemes suffer from a number of disadvantages. An attractive alternative is discontinuous Galerkin methods, which benefit from arbitrarily high spatial order of accuracy, geometric flexibility, and other properties. To enable accurate computations of high-speed particle-laden flows, an Euler-Lagrange methodology was developed in which the Eulerian field of the carrier gas is calculated using a discontinuous Galerkin scheme while the disperse phase is treated with Lagrangian particle tracking. We discuss challenges associated with coupling these two formulations and how to handle them. Momentum and energy transfer between the carrier gas and the particle phase is considered, and the importance of accounting for interparticle collisions is assessed. In addition, we describe the physical model of the particle phase and examine effects of its uncertainties on the numerical solution. We demonstrate the performance of the Euler-Lagrange method in representative testcases, with focus on the accurate prediction of particle trajectories and heating augmentation. Quantitative comparisons with experiments are provided.

Ching, Eric J.↗
NASA NTRS1993

Noniterative implicit method for tracking particles in mixed Lagrangian-Eulerian formulations

The existing implicit methods for the current initial value problems (IVPs) concerning particle-laden flows are complicated and iterative in nature. This paper presents a noniterative implicit method which can be used with pressure-based as well as with density-based algorithms. The method is illustrated by analyzing a dilute dispersion of noninteracting solid particles in an isothermal flow in a passage bounded by one straight wall and one wavy wall, in which all particles are spherical and have a finite velociy relative to the continuum phase at the inflow boundary.

Shih, T. I.-P.↗
DOE OSTI2021

Implementing a Stochastic Soot Model in a 3D Domain

In this document a highly detailed stochastic soot model limited to 0D simulations is coupled to 3D domains through the use of a Lagrangian parcel-Eulerian fluid method. Although both the stochastic soot model used and the Lagrangian parcel-Eulerian fluid method have long histories of development, their use, as described in this document, is novel and useful. Previous works significant to the model's development include documents from both the stochastic and simpler soot model genre and the fuel, aerosol, and other particle tracking and Lagrangian parcel-Eulerian fluid genres. Developing the theory behind the model is crucial to its implementation because of the unconventional Lagrangian parcel-Eulerian fluid representation. In fact, the Lagrangian parcel-Eulerian fluid coupling is only a means of simplifying the much more difficult theoretical model. Despite the accompanying assumptions, the complete model is validated from the bottom up and then again in a holistic fashion with promising results. Then the model is used in multiple case studies, showcasing capabilities not had by other models. The optical properties of soot generated in a Spray A simulation are calculated to find measured results are likely overpredicting the mass of soot along the central axis via KL extinction measurements. A thermophoresis submodel that calculates force based on the soot particles' shape is installed to find it has a high influence on the path of the heaviest soot particles. Investigations into the HACA mechanism for soot growth and the effect of syngas on soot in 3D domains are performed with much more detail than has been available before.

Strickland, Tyler↗
NASA NTRSDate not supplied

Dust Particle Aeroheating Calculations for Mars Entry Hypersonic Flows

The purpose of the current research effort is to predict particle trajectories in a hypersonic flowfield while accounting for all relevant particle-fluid and particle-particle interactions. The resulting particle solver is titled DUst Simulation & Tracking (DUST) and works in conjunction with the US3D CFD flow solver. The key elements underpinning the current work are an efficient mesh-localiztion algorithm, time-driven hard-sphere model, point-to-point MPI framework, coarse-graining using computational parcels, and high-order Adams-Bashforth time stepping. The coupled US3D-DUST framework will be applied to conduct a multi-physics examination of dust-laden flows around the the Schiarparelli capsule.

Dusty Flows↗
NASA NTRSDate not supplied

Dust Particle Aeroheating Calculations for Mars Entry Hypersonic Flows

The purpose of the current research effort is to predict particle trajectories in a hypersonic flowfield while accounting for all relevant particle-fluid and particle-particle interactions. The resulting particle solver is titled DUst Simulation & Tracking (DUST) and works in conjunction with the US3D CFD flow solver. The key elements underpinning the current work are an efficient mesh-localiztion algorithm, time-driven hard-sphere model, point-to-point MPI framework, coarse-graining using computational parcels, and high-order Adams-Bashforth time stepping. The coupled US3D-DUST framework will be applied to conduct a multi-physics examination of dust-laden flows around the the Mars 2020 capsule.

Dusty Flows↗
DOE OSTI2022

A comprehensive model to capture electrical discharge and spark channel evolution during spark-ignition processes

Emissions reduction through engine efficiency improvements is a priority for automakers who have turned to unconventional engine operation such as highly dilute, boosted, and stratified charge. Given its importance to flame initiation and sustained turbulent flame propagation, reliable and accurate spark ignition models are necessary to design ignition systems that reduce cyclic indicated mean effective pressure (IMEP) variability and increase engine efficiency in these operation modes. In this paper, secondary electric circuit, short-circuit, blowout, and re-strike sub-models are added to the Lagrangian-Eulerian spark ignition (LESI) model to simulate electrical discharge and spark channel elongation in an inert cross-flow combustion vessel. First, the physics of the underlying sub-models are described and the governing equations discussed with the spark channel voltage expression playing a critical role. Then, the experimental and simulations setups are presented. The results section begins with the derivation of spark channel voltage from experimental results. Then, electrical discharge and spark channel elongation simulations in inert flows are carried out using LESI and compared against experimental results. Finally, the results validate the model's ability to accurately predict spark channel elongation, as well as the occurrence of short-circuits, blowouts, re-strikes, and end of discharge.

42 ENGINEERING↗