Search NASA⌕ Search

SEARCH · Search NASA

Results for “Large Space Telescopes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Research study on stabilization and control. Modern sampled-data control theory: Stability analysis of the low cost large space telescope system

The pointing stability of the low-cost large space telescope (LST) system was investigated. The low-cost LST is characterized by the use of reaction wheels for the generation of control torques. Because of the critical requirement on the pointing accuracy of the LST, the nonlinear frictional characteristics of the bearings of the reaction wheels were studied which can cause limit cycles in a closed-loop system. Another possible source of pointing error in the LST is due to the effect of quantization and sensor noise. Since the LST is a digital system, digital to analog and analog to digital converters and sensors for positional and rate feedbacks were used. Sensor noise and amplitude quantization causes pointing error in the LST and, in addition, quantization is a nonlinear phenomenon which can cause self-sustained oscillations in the closed-loop system. The dynamic modeling of the single-axis LST is described, and several methods of evaluating the attitude error of the digital LST due to quantization and noise inputs are given.

Kuo, B. C.↗
NASA NTRS1975

The Large Space Telescope - A new adventure

A description is presented of the Large Space Telescope (LST), which will be launched in 1982 and can accomodate four scientific instruments at any given time, permitting spectrographic and photometric observations between 1200 A in the UV and 1 mm in the IR. Basic elements of the LST are the optical telescope assembly, the scientific instruments (cameras, spectrographs, photometers, and an astrometer), and the support-systems module. Developmental as well as observational considerations are discussed, including various approaches to testing, maintenance, data transmission and processing, instrument calibration, housekeeping, and refurbishment. A possible mission scenario is outlined.

Friedlaender, F. M.↗
NASA NTRS1972

Phase A reaction control system design for the Large Space Telescope (LST)

The design of a reaction control system (RCS) for the Large Space Telescope is discussed. The primary requirement for the RCS is to serve as an emergency backup control system to the primary attitude control system. A regulated gaseous nitrogen RCS was selected. The operation of the system and its individual components is described. The principal design goals of the RCS were to minimize contamination effects, make use of existing components, and modularize the system to provide ease in manned orbital maintenance.

Price, W. B.↗
NASA NTRS2008

An Improved Wavefront Control Algorithm for Large Space Telescopes

Wavefront sensing and control is required throughout the mission lifecycle of large space telescopes such as James Webb Space Telescope (JWST). When an optic of such a telescope is controlled with both surface-deforming and rigid-body actuators, the sensitivity-matrix obtained from the exit pupil wavefront vector divided by the corresponding actuator command value can sometimes become singular due to difference in actuator types and in actuator command values. In this paper, we propose a simple approach for preventing a sensitivity-matrix from singularity. We also introduce a new "minimum-wavefront and optimal control compensator". It uses an optimal control gain matrix obtained by feeding back the actuator commands along with the measured or estimated wavefront phase information to the estimator, thus eliminating the actuator modes that are not observable in the wavefront sensing process.

adaptive optics↗
NASA NTRS1975

Large Space Telescope support systems module thermal control

In 1982, an unmanned three-meter class Cassegrainian telescopic system referred to as the Large Space Telescope (LST) will be placed in earth orbit by the Shuttle. The LST consists of a telescope system and surrounding support structure that is referred to as the support system module (SSM). This paper summarizes the thermal control subsystem for several candidate SSM designs. Major emphasis has been given to the LST/SSM design concept that includes a thermally isolated aft cylinder compartment that contains subsystem components. Requirements, interfaces and thermal math modeling methods are presented. Analysis results demonstrate that a cold-biased thermal design using electrical heaters is promising.

Chapter, J. J.↗
NASA NTRS1972

Large space telescope, phase A. Volume 1: Executive summary

The Phase A study of the Large Space Telescope (LST) is reported. The study defines an LST concept based on the broad mission guidelines provided by the Office of Space Science (OSS), the scientific requirements developed by OSS with the scientific community, and an understanding of long range NASA planning current at the time the study was performed. The LST is an unmanned astronomical observatory facility, consisting of an optical telescope assembly (OTA), scientific instrument package (SIP), and a support systems module (SSM). The report consists of five volumes. The report describes the constraints and trade off analyses that were performed to arrive at a reference design for each system and for the overall LST configuration. A low cost design approach was followed in the Phase A study. This resulted in the use of standard spacecraft hardware, the provision for maintenance at the black box level, growth potential in systems designs, and the sharing of shuttle maintenance flights with other payloads.

Source record↗
NASA NTRS1971

Fabrication of the titanium transition ring of the Large Space Telescope (LST)

The fabrication of the titanium transition ring is summarized. The transition ring assembly was designed for the large space telescope and consists of two large titanium rings bolted together. The cross section dimensions of the assembly are 13-inches wide by 7-inches thick. The fabrication processes are discussed, and it is concluded that the work involved fabricating the largest titanium forging ever made.

Klein, L. A.↗
NASA NTRS1974

Zone generator for Large Space Telescope technology

A concept is presented for monitoring the optical adjustment and performance of a Large Space Telescope which consists of a 1.2m diameter turntable with a laser stylus to operate at speeds up to 30 rpm. The focus of the laser stylus is under closed loop control. A technique for scribing zones of suitable depth, width, and uniformity applicable to large telescope mirrors is also reported.

Erickson, K. E.↗
NASA NTRS1971

Large Space Telescope (LST) preliminary analysis and design report, revision A

The design of a three meter class large space telescope (LST) is described. Mechanical design concepts were developed which integrate the separate spacecraft, telescope and instrument structures in such a way as to minimize their interaction during launch and orbital operation. The LST is of the Ritchey-Chretin type with a primary optics focal ratio of 3.12 to an overall focal ratio of 12.

Source record↗
NASA NTRS1973

Metrication study for large space telescope

Various approaches which could be taken in developing a metric-system design for the Large Space Telescope, considering potential penalties on development cost and time, commonality with other satellite programs, and contribution to national goals for conversion to the metric system of units were investigated. Information on the problems, potential approaches, and impacts of metrication was collected from published reports on previous aerospace-industry metrication-impact studies and through numerous telephone interviews. The recommended approach to LST metrication formulated in this study cells for new components and subsystems to be designed in metric-module dimensions, but U.S. customary practice is allowed where U.S. metric standards and metric components are not available or would be unsuitable. Electrical/electronic-system design, which is presently largely metric, is considered exempt from futher metrication. An important guideline is that metric design and fabrication should in no way compromise the effectiveness of the LST equipment.

Creswick, F. A.↗
NASA NTRS1972

Scientific Instrument Package for the large space telescope (SIP)

The feasibility of a scientific instrument package (SIP) that will satisfy the requirements of the large space telescope was established. A reference configuration serving as a study model and data which will aid in the trade-off studies leading to the final design configuration are reported.

Source record↗
NASA NTRS1975

Limit cycle analysis of large space telescope with CMG nonlinearity

The existence and characteristics of self-sustained oscillations were studied in the Large Space Telescope (LST) system due to the presence of nonlinear gimbal friction in the control moment gyroscopes (CMG's). A continuous data single-axis model of the LST is considered. A solid friction model is used to represent CMG gimbal friction. A rigorous mathematical model is derived for use in a continuous describing function analysis. Conditions for self-sustained oscillations are then determined.

Seltzer, S. M.↗
NASA NTRS1972

Large space telescope, phase A. Volume 4: Scientific instrument package

The design and characteristics of the scientific instrument package for the Large Space Telescope are discussed. The subjects include: (1) general scientific objectives, (2) package system analysis, (3) scientific instrumentation, (4) imaging photoelectric sensors, (5) environmental considerations, and (6) reliability and maintainability.

Source record↗
NASA NTRS1972

Large space telescope, phase A. Volume 5: Support systems module

The development and characteristics of the support systems module for the Large Space Telescope are discussed. The following systems and described: (1) thermal control, (2) electrical, (3) communication and data landing, (4) attitude control system, and (5) structural features. Analyses of maintainability and reliability considerations are included.

Source record↗
NASA NTRS1976

Stability analysis of the discrete-data Large-Space-Telescope system

This paper considers the application of the discrete describing function to the stability analysis of the Large-Space Telescope (LST) system. An analytical model of the CMG gimbal friction is derived, which is then used to arrive at a closed-form analytical expression for the discrete describing function of the nonlinearity. The analysis is used for the study of the fine-pointing stability of the LST vehicle. Simulation results corroborate the conclusions from the analytical analysis.

Kuo, B. C.↗