Search NASA⌕ Search

SEARCH · Search NASA

Results for “Level-set method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

31 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Two-color pyrometry based flame to fuel surface radiative heat flux diagnostic using flamelets

In this study, a non-intrusive two-color pyrometry based radiative heat flux diagnostic is presented that accounts for the self-absorption effects. This diagnostic relies on looking up the flame temperature and soot volume fraction using the ratio of color intensities obtained from digital cameras and numerical solutions of 1D steady-state diffusion flames. Virtual two color pyrometry of computed flame show a unique one-to-one mapping of strained flames with intensity ratio; thereby allowing flames to be indexed and creation of a two-color flamelet manifold (TCFM). The TCFM is a function of two variables; the ratio of red to green intensities (flame index) and physical distance to the stoichiometric surface defined using a level-set function. The developed diagnostic is used in upward flame spread experiments where an approximate flame hull reconstruction method is applied to provide the 3D level-set function and intensity ratio for use of TCFM to provide radiative absorption properties for 3D ray tracing. Accounting for self- absorption effects provide improved soot volume fraction estimates. In conclusion, the radiative heat flux estimates are found to be in very good agreement with literature and improved results are obtained near the flame base.

42 ENGINEERING↗
DOE OSTI2020

A reduced-order shifted boundary method for parametrized incompressible Navier–Stokes equations

Here, we investigate a projection-based reduced order model of the steady incompressible Navier–Stokes equations for moderate Reynolds numbers. In particular, we construct an “embedded” reduced basis space, by applying proper orthogonal decomposition to the Shifted Boundary Method, a high-fidelity embedded method recently developed. We focus on the geometrical parametrization through level-set geometries, using a fixed Cartesian background geometry and the associated mesh. This approach avoids both remeshing and the development of a reference domain formulation, as typically done in fitted mesh finite element formulations. Two-dimensional computational examples for one and three parameter dimensions are presented to validate the convergence and the efficacy of the proposed approach.

"embedded" basis↗
DOE OSTI2022

Calculating the grain boundary inclination of voxelated grain structures using a smoothing algorithm

We have developed a flexible method for calculating the grain boundary (GB) inclinations of voxelated grain structure data using smoothing algorithms. We compared the performance of four algorithms: the linear interpolation, Allen–Cahn, level-set, and vertex algorithms. We assessed their accuracy using 2D and 3D cases with known inclinations. The vertex algorithm provided the best balance between accuracy and efficiency for 2D structures while the linear interpolation algorithm provided the best balance for 3D structures. We compared the GB inclinations calculated using our smoothing method on a 3D high energy X-ray diffraction microscopy (HEDM) dataset to those determined by meshing the GBs. The two approaches determined similar GB plane distributions, though they varied significantly at triple junctions. In conclusion, the smoothing method was demonstrated for two sources of 3D voxelated grain structures: HEDM data and results from Monte Carlo Potts grain growth simulations.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Multi-scale topology optimization of multi-material structures with controllable geometric complexity — Applications to heat transfer problems

This study presents a topology optimization method to design assemblies of periodic cellular materials with controllable geometric complexity. The framework is based on a novel multi-scale and multi-material design model in which the structure, the layout of the material subdomains, and their micro-structures are optimized concurrently. To allow a tight control over its geometrical complexity, the layout at the macro-scale is described by level-set fields, parameterized by geometric primitives. The micro-scale geometry is represented through a density approach. A nonlinear programming algorithm drives the optimization process using design sensitivities computed by the discrete adjoint method. The proposed design framework is studied with heat transfer problems. Practical design problems, such as a heat sink and a thermal storage unit with phase change are discussed. The macro-scale analysis model relies on a generalized transient diffusion equation. At the micro-scale, homogenization is used to compute equivalent material properties. The numerical examples in this study show that the optimized multi-scale multi-material layouts outperform the corresponding mono-scale structures while maintaining geometric simplicity at the macro-scale level.

42 ENGINEERING↗
DOE OSTI2019

Level-set Modeling Simulations of Chemical Vapor Infiltration for Ceramic Matrix Composites Manufacturing

Silicon-carbide (SiC) reinforced ceramic matrix composites (CMCs) are a key enabling technology to reduce fuel consumption and emissions of gas turbine engines. In one manufacturing approach, chemical vapor infiltration (CVI) is limited to only coating SiC fibers. The preform is then fabricated using a lay-up of basic plys or 2-D woven sheets composed of the precoated fibers. At the other extreme, CVI is used to completely densify a 3-D woven preform shaped almost like the gas turbine component itself. The latter approach is more suitable for highly engineered components which sit directly in the gas path of the engine, for example, a high pressure turbine blade. In this case, the geometry is necessarily complex for aerodynamic, stress, and lifing (multi-physics) requirements. Presently, optimizing the CVI-dominated manufacturing approach is largely by trial-and-error. In this work, a first-principles modeling of CVI is performed to realize optimization of SiC/SiC CMC manufacturing. The modeling is based on a level-set framework to describe the interface between the vapor and solid phases. A finite-difference numerical scheme using an immersed boundary method is developed for fixed, structured meshes. Massively parallel direct numerical simulations (DNS) of CVI through fiber-woven geometries are performed using one-step chemistry, and over a range of Thiele moduli. Illustrative applications of the resulting large DNS data sets are given, including the development of fiber-weave specific infiltration models and structure functions for mean-field (porous media) Computational Fluid Dynamics (CFD) simulations of CVI.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A high-order Shifted Interface Method for Lagrangian shock hydrodynamics

Here, we present a new method for two-material Lagrangian hydrodynamics, which combines the Shifted Interface Method (SIM) with a high-order Finite Element Method. Our approach relies on an exact (or sharp) material interface representation, that is, it uses the precise location of the material interface. The interface is represented by the zero level-set of a continuous high-order finite element function that moves with the material velocity. This strategy allows to evolve curved material interfaces inside curved elements. By reformulating the original interface problem over a surrogate (approximate) interface, located in proximity of the true interface, the SIM avoids cut cells and the associated problematic issues regarding implementation, numerical stability, and matrix conditioning. Accuracy is maintained by modifying the original interface conditions using Taylor expansions. We demonstrate the performance of the proposed algorithms on established numerical benchmarks in one, two and three dimensions.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

BDEM (Discrete-element-simulator for high-solids granular flows) [SWR-22-72]

BDEM is a discrete element method based simulation tool developed specifically for modeling high-solids granular flows that include polydispersity, heat-transfer, moving boundaries and chemistry. Our solver provides facilities for simulating spherical/non-spherical particles with modified contact and friction models in complex dynamic geometries defined using level-sets or triangulated files. The solver is developed on top of NREL's open-source performance portable library, AMReX, providing parallel execution capabilities on current and upcoming high-performance-computing (HPC) architectures. Simulations at the scale of several millions to billion particles have been performed using this software on large scale computing resources. This software can be applied to non-reacting solids dominant flows in silos, hoppers and screw conveyors as well as in high temperature reacting systems such as screw kilns and auger reactors.

Sitaraman, Hariswaran↗
DOE OSTI2026

MAGIC: M arching Cubes Isosurface Uncertainty Visualization for G auss i an Uncertain Data With Spatial C orrelation

Here, in this paper, we study the propagation of data uncertainty through the marching cubes algorithm for isosurface visualization for correlated uncertain data. Consideration of correlation has been shown paramount for avoiding errors in uncertainty quantification and visualization in multiple prior studies. Although the problem of isosurface uncertainty with spatial data correlation has been previously addressed, there are two major limitations to prior treatments. First, there are no analytical formulations for uncertainty quantification of isosurfaces when the data uncertainty is characterized by a Gaussian distribution with spatial correlation. Second, as a consequence of the lack of analytical formulations,existing techniques resort to a Monte Carlo sampling approach, which is expensive and difficult to integrate into visualization tools. To address these limitations, we present a closed-form framework to efficiently derive uncertainty in marching cubes level-sets for Gaussian uncertain data with spatial correlation (MAGIC). To derive closed-form solutions, we leverage the Hinkley's derivation on the ratio of Gaussian distributions. With our analytical framework, we achieve a significant speed-up and enhanced accuracy of uncertainty quantification over classical Monte Carlo methods. We further accelerate our analytical solutions using many-core processors to achieve speed-ups up to 585× and integrability with production visualization tools for broader impact. We demonstrate the effectiveness of our correlation-aware uncertainty framework through experiments on meteorology, urban flow, and astrophysics simulation datasets.

Gaussian↗
DOE OSTI2022

Fracture-based shape optimization built upon the topological derivative

In Silva et al. (2011) and Alidoost et al. (2020), the authors developed an approximation of the energy release rate field associated with a small edge or surface crack at any boundary location and with any orientation using the topological derivative. The approximation is computationally attractive because it requires only a single analysis on the non-cracked domain in contrast with conventional boundary-element and finite-element-based methods, which require a separate and costlier analysis for each crack length-location-orientation combination. Here, a shape optimization scheme for fracture-resistant structures is developed using the energy release rate approximation. In the gradient-based optimization scheme, the domain and its boundary are defined implicitly using level-set functions. The level-set functions of arbitrary geometries are constructed using Boolean operations from the level-set functions of simple primitives. This geometrical representation has the dual advantage of (i) allowing shapes to intersect and/or separate during the optimization and (ii) simplifying the computation of the shape sensitivities.

42 ENGINEERING↗
DOE OSTI2024

Data-Driven Computation of Probabilistic Marching Cubes for Efficient Visualization of Level-Set Uncertainty

Uncertainty visualization is an important emerging research area. Being able to visualize data uncertainty can help scientists improve trust in analysis and decision-making. However, visualizing uncertainty can add computational overhead, which can hinder the efficiency of analysis. In this paper, we propose novel data-driven techniques to reduce the computational requirements of the probabilistic marching cubes (PMC) algorithm. PMC is an uncertainty visualization technique that studies how uncertainty in data affects level-set positions. However, the algorithm relies on expensive Monte Carlo (MC) sampling for the multivariate Gaussian uncertainty model because no closed-form solution exists for the integration of multivariate Gaussian. In this work, we propose the eigenvalue decomposition and adaptive probability model techniques that reduce the amount of MC sampling in the original PMC algorithm and hence speed up the computations. Our proposed methods produce results that show negligible differences compared with the original PMC algorithm demonstrated through metrics, including root mean squared error, maximum error, and difference images. We demonstrate the performance and accuracy evaluations of our data-driven methods through experiments on synthetic and real datasets.

Athawale, Tushar↗
DOE OSTI2021

Fuel Property Effects on Knock Propensity and Thermal Efficiency in a Direct-Injection Spark-Ignition Engine

Engine knock remains one of the major barriers to further improvement in thermal efficiency of Direct-Injection Spark-Ignition (DISI) engines. While Research Octane Number and Motor Octane Number are often used as standard rating methods for knock resistance of fuels, the impacts of other fuel properties on knock propensity in modern engines such as heat of vaporization (HoV) and laminar flame speed (LFS) require better understanding in order to co-optimize fuels and engine designs to achieve higher thermal efficiency and lower CO2 emission. In the present study, computational fluid dynamics (CFD) is used to model a boosted DISI engine with a focus on knock prediction and fuel property effects. A level-set G-equation model is employed to capture turbulent premixed combustion, and is coupled with a transported Livengood-Wu (L-W) integral approach to predict autoignition in the unburnt region. A criterion associated with the L-W integral is developed to accurately predict knock onset and knock-limited spark-advance. This model is then applied to a sensitivity analysis of HoV and LFS on knock tendency and thermal efficiency. The pressure-temperature trajectory framework is applied and extended to study the fuel effects on auto-ignition process in the engine. An existing efficiency-based merit function, which is derived from experiments for boosted SI engines, is evaluated and improved based on the current CFD results.

DISI↗
DOE OSTI2021

Automatic Differentiation in MetaPhysicL and Its Applications in MOOSE

Efficient solution via Newton’s method of nonlinear systems of equations requires an accurate representation of the Jacobian, corresponding to the derivatives of the component residual equations with respect to the degrees of freedom. In practice these systems of equations often arise from spatial discretization of partial differential equations used to model physical phenomena. These equations may involve domain motion or material equations that are complex functions of the systems’ degrees of freedom. Computing the Jacobian by hand in these situations is arduous and prone to error. Finite difference approximations of the Jacobian or its action are prone to truncation error, especially in multiphysics settings. Symbolic differentiation packages may be used, but often result in an excessive number of terms in realistic model scenarios. An alternative to symbolic and numerical differentiation is automatic differentiation (AD), which propagates derivatives with every elementary operation of a computer program, corresponding to continual application of the chain rule. Automatic differentiation offers the guarantee of an exact Jacobian at a relatively small overhead cost. In this work, we outline the adoption of AD in the Multiphysics Object Oriented Simulation Environment (MOOSE) via the MetaPhysicL package. We describe the application of MOOSE’s AD capability to several sets of physics that were previously infeasible to model via hand-coded or Jacobian-free simulation techniques, including arbitrary Lagrangian-Eulerian and level-set simulations of laser melt pools, phase-field simulations with free energies provided through neural networks, and metallic nuclear fuel simulations that require inner Newton loop calculation of nonlinear material properties.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Optimal toolpath generation system and method for additively manufactured composite materials

The present disclosure relates to a system for optimizing an additive manufacturing (AM) process. The system may use a printing component for using a material to form a component in a layer-by-layer process. An electronic controller may control movement of one of the printing component or a substrate on which the component is being formed, in a manner to optimize a toolpath for the printing component as each layer of the component is formed. Optimization operations are performed using an optimization subsystem which enables manufacturability constraints, as well as optimized toolpaths for each layer of the component, to be defined using contours of a level-set function. The level-set function may be used to define the optimized toolpaths within a fixed, predetermined grid, and the optimized toolpaths then used to generate suitable code for controlling movement of the printing component relative to the substrate to create the part or structure in a layer-by-layer process, using the optimized toolpaths.

Lewicki, James↗