Search NASA⌕ Search

SEARCH · Search NASA

Results for “Lignin depolymerization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Non-catalytic oxidative depolymerization of lignin in perfluorodecalin to produce phenolic monomers

We demonstrate for the first time non-catalytic, oxidative cracking with molecular oxygen (O 2 ) to depolymerize native lignin into oxygenated phenolic monomers. Maximum monomer yield of 10.5 wt% was achieved at 250 °C after only 10 min of reaction and included vanillin, syringaldehyde, vanillic acid, and syringic acid. High rates of oxidation are attributed to the use of perfluorodecalin as solvent. Perfluorodecalin is a perfluorocarbon (PFC), characterized by their chemical stability and exceptionally high solubility for O 2 . Monomer yields were typically five-fold higher in perfluorodecalin compared to solvents more commonly employed in lignin conversion, such as methanol, butanol, acetonitrile, and ethyl acetate. Phenolic monomer production in perfluorodecalin favors high temperatures and short reaction times to prevent further oxidation of the produced monomers. Lignin oil obtained under oxidative conditions in perfluorodecalin showed lower molecular weight and smaller polydispersity compared to other solvents. Increasing the reaction time further decreased the molecular weight, while increasing reaction time in an inert atmosphere increased the molecular weight of the lignin oil. High concentrations of O 2 in perfluorodecalin not only increased lignin depolymerization but suppressed undesirable condensation reactions. Depolymerization is likely initiated by thermally induced homolytic cleavage of ether linkages in lignin to form phenoxy and carbon-based radicals. These radicals bind with O 2 as a radical scavenger and further react to form phenolic monomeric products rather than repolymerizing to large oligomers. The PFC process was scaled from 5 mL to 250 mL without any loss of yield. Because most organic compounds are not soluble in perfluorodecalin, recycling is easily achieved via liquid–liquid separation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Controllable depolymerization of lignin using carbocatalyst graphene oxide under mild conditions

Many efforts have been devoted to depolymerizing lignin to high-value aromatic monomers. However, a controllable and complete lignin inter-unit bond cleavage remains difficult because of the randomness in lignin structure and low selectivity in catalysis. Herein, we demonstrate that a sole carbocatalyst graphene oxide (GO) can selectively oxidize aryl- and alkyl-hydroxyl groups of lignin without the presence of any additional oxidizers, leading to lignin degradation under mild conditions. The results from lignin dimers, lignin oligomers, and organosolv lignin indicate that the depolymerization is catalyzed via an oxidative mechanism through an enol ether intermediate, a stable intermediate that has been chemically isolated here. Quantum chemistry calculations at the density functional theory level indicate that the phenolic –OH group in lignin facilitates the formation of radical cations and thus prohibits ring opening reactions, leading to the complete conversion of lignin dimers to guaiacol through the enol ether intermediate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Reversibly soluble bases for lignin oxidative depolymerization

Disclosed herein are lignin valorization strategies that integrate thermochemical pretreatment strategies. Using methods disclosed herein, yields of greater than 40% of usable monomers are obtained from lignin in biomass. The monomers can be assimilated by strains of Pseudomonas putida.

Kruger, Jacob S.↗
DOE OSTI2022

Synthesis of bioproducts from lignin-derived aromatics by genetically modified microorganisms

The present invention provides for a method of converting a depolymerized lignin aromatic compound into a bioproduct, comprising: (a) providing a composition comprising a depolymerized lignin aromatic compound, optionally a depolymerized cellulose, and optionally a depolymerized hemicellulose, and (b) introducing a genetically modified microorganism to the composition, wherein the genetically modified microorganism is capable of converting the depolymerized lignin aromatic compound into a bioproduct; such that the depolymerized lignin aromatic compound is converted into a bioproduct.

Gladden, John M.↗
DOE OSTI2021

Intracellular pathways for lignin catabolism in white-rot fungi

White-rot fungi, the most efficient organisms at breaking down lignin from wood in Nature, utilize lignin degradation products as a carbon source. 15 Lignin is a biopolymer found in plant cell walls that accounts for 30% of the organic carbon in the biosphere. White-rot fungi (WRF) are considered the most efficient organisms at degrading lignin in Nature. While lignin depolymerization by WRF has been exhaustively studied, the possibility that WRF are able to utilize lignin as a carbon source is still a matter of controversy. Here we employ 13C-labeling and systems biology approaches to demonstrate that two WRF, Trametes versicolor and Gelatoporia subvermispora, funnel lignin-derived aromatic compounds into central carbon metabolism via intracellular catabolic pathways. These results provide insights into global carbon cycling in 20 soil ecosystems, and furthermore establishes a foundation for employing WRF in simultaneous lignin depolymerization and bioconversion to bioproducts – a key step towards enabling a sustainable bioeconomy.

Del Cerro, Carlos↗
DOE OSTI2021

Phototunable Lignin Plastics to Enable Recyclability

The accumulation of non-degradable petrochemical plastics imposes a significant threat to the environment and ecosystems. We addressed this challenge by designing a new type of phototunable plastics based on the unique lignin chemistry to enable readily end-life recycling. The advanced material design leveraged the efficient photocatalytic lignin depolymerization by ZnO nanoparticles to build lignin-polymethyl methacrylate (PMMA)-ZnO blends. We first demonstrated the highly effective phototunable lignin depolymerization in the complex polymer blend matrix and explored the molecular mechanisms. The technical barriers of mechanical property and recycling processing were then addressed by a new blend design with lignin core grafted with PMMA polymer. The new process has resulted in a new type of PMMA-g-lignin blend, which significantly improved the mechanical properties, making it comparable to PMMA alone. More importantly, the mechanical properties of the UV-treated blend decreased drastically in the new design, whereas the properties did not reduce in the non-grafted blends upon UV exposure. The results highlighted that the new blend design based on graftization maximized the impact of lignin depolymerization on blend structure and recyclability. Based on the results, we developed a process integrating UV and alkaline treatments to recycle PMMA for plastics and fractionated lignin for bioconversion or other applications in the new phototunable plastics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Application of Generalized Standard Addition Method and Ultraviolet Spectroscopy to Quantify Electrolytic Depolymerization of Lignin

Industrial lignin waste is an important byproduct of bio-refineries and the paper industry. Depolymerization of this industrial lignin could generate useful aromatic compounds. This group has focused on electrolytic decomposition of biorefinery lignin. To quantify electrolytic decomposition of the lignin in a highly caustic solution, ultraviolet (UV) spectroscopy provides a useful probe. The conversion of the neat lignin to the oxidized products achieved by the electrolytic reactor may be measured by quantifying the amount of unreacted neat lignin that remains in the effluent. Because the properties of electrolytic decomposition products are largely unknown, a useful approach to quantify decomposition of the neat lignin is to use a multivariate calibration method referred to as the generalized standard addition method (GSAM). In this approach, the electrolytic decomposition products represent a background interference and the neat lignin that remains can be quantified. Furthermore, this approach allows the conversion of the neat lignin to be calculated in a solution that is a complex mixture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Microorganisms and methods for producing 2-pyrone-4,6-dicarboxylic acid and other compounds

Recombinant microorganisms configured for enhanced production of compounds such as 2-pyrone-4,6-dicarboxylic acid (PDC) and methods of using the recombinant microorganisms for the production of these compounds. The recombinant microorganisms include one or more modifications that reduce 2-pyrone-4,6-dicarboxylic acid (PDC) hydrolase activity, 4-carboxy-2-hydroxy-6-methoxy-6-oxohexa-2,4-dienoate (CHMOD) cis-trans isomerase activity, 4-carboxy-2-hydroxy-6-methoxy-6-oxohexa-2,4-dienoate (CHMOD) methyl esterase activity, and/or vanillate/3-O-methylgallate O-demethylase activity. The recombinant microorganisms can be used to generate PDC from media comprising plant-derived phenolics, such as syringyl phenolics, guaiacyl phenolics, and p-hydroxyphenyl phenolics. The plant-derived phenolics can be derived from pretreated lignin, including depolymerized lignin or other chemically altered lignin.

Noguera, Daniel R.↗
DOE OSTI2023

2.3.4.100 - Lignin Utilization

Lignin depolymerization to aromatic monomers is a primary route for myriad lignin valorization strategies. To date, there are many strategies able to cleave aryl-ether linkages in lignin, but the lignin polymer, in both its native and processed forms, contains a substantial fraction of refractory carbon-carbon linkages between aromatic units, which typically limits aromatic monomer yields to -30-40 wt% or lower, depending on the feedstock. To that end, the Lignin Utilization (LigU) project addresses the critical challenge of lignin depolymerization catalysis with emphasis on C-C bond cleavage. Being able to achieve cost-effective C-C bond catalysis in lignin depolymerization would enable a substantial increase in accessible aromatic monomer yields from lignin. Among the catalysis strategies that have been investigated in the LigU project, we have made substantial progress in the use of autoxidation catalysis, inspired by the industrial conversion of p-xylene to terephthalic acid, for C-C bond cleavage in lignin. Using multiple substrates, we have demonstrated that autoxidation catalysis can produce mixtures of bio-available aromatic monomers for conversion to exemplary bioproducts, such as cis,cis-muconic acid, in collaboration with the Biological Lignin Valorization project. Prior to FY23, the LigU project also included lignin analytical chemistry method development, lignin analytics for BETO-funded projects, and model compound syntheses, which will also be presented.

BIOMASS FUELS↗
DOE OSTI2024

Perspective on Lignin Conversion Strategies That Enable Next Generation Biorefineries

The valorization of lignin, a currently underutilized component of lignocellulosic biomass, has attracted attention to promote a stable and circular bioeconomy. Successful approaches including thermochemical, biological, and catalytic lignin depolymerization have been demonstrated, enabling opportunities for lignino-refineries and lignocellulosic biorefineries. Although significant progress in lignin valorization has been made, this review describes unexplored opportunities in chemical and biological routes for lignin depolymerization and thereby contributes to economically and environmentally sustainable lignin-utilizing biorefineries. This review also highlights the integration of chemical and biological lignin depolymerization and identifies research gaps while also recommending future directions for scaling processes to establish a lignino-chemical industry.

09 BIOMASS FUELS↗
DOE OSTI2024

Catalytic carbon–carbon bond cleavage in lignin via manganese–zirconium-mediated autoxidation

Abstract Efforts to produce aromatic monomers through catalytic lignin depolymerization have historically focused on aryl–ether bond cleavage. A large fraction of aromatic monomers in lignin, however, are linked by various carbon–carbon (C–C) bonds that are more challenging to cleave and limit the yields of aromatic monomers from lignin depolymerization. Here, we report a catalytic autoxidation method to cleave C–C bonds in lignin-derived dimers and oligomers from pine and poplar. The method uses manganese and zirconium salts as catalysts in acetic acid and produces aromatic carboxylic acids as primary products. The mixtures of the oxygenated monomers are efficiently converted to cis,cis -muconic acid in an engineered strain of Pseudomonas putida KT2440 that conducts aromatic O -demethylation reactions at the 4-position. This work demonstrates that autoxidation of lignin with Mn and Zr offers a catalytic strategy to increase the yield of valuable aromatic monomers from lignin.

09 BIOMASS FUELS↗
DOE OSTI2021

Elucidation of Aromatic Catabolic Pathways in White-Rot Fungi

This project aims to investigate the hypothesis that white-rot fungi can simultaneously depolymerize lignin extracellularly and catabolize depolymerization products intracellularly as carbon and energy sources. Evaluating this hypothesis will provide deeper understanding of the role of white-rot fungi in facilitating carbon sequestration in Nature. Additionally, identifying the most promising fungal strains for lignin turnover and catabolism will catalyze future efforts in genetic tool development to enable metabolic engineering in white-rot fungi for lignin bioconversion to bioproducts. Lignin is the second most abundant plant-based biopolymer on Earth and represents up to 40% of the energy density of lignocellulosic biomass. Even though lignin is a massive natural carbon and energy reservoir, only a small group of basidiomycete fungi, namely white-rot fungi (WRF), have evolved the ability to efficiently depolymerize and mineralize lignin to CO2 and H2O. Considerable research efforts have been undertaken to understand how WRF depolymerize lignin but the biochemical reactions that convert lignin into CO2 have been largely neglected. In fact, it is unclear if WRF intracellularly catabolize lignin-derived aromatic compounds to utilize them as a carbon and energy source, or rather if lignin is depolymerized and mineralized extracellularly merely to facilitate access to cellulose and hemicellulose for use as a primary carbon source. To date, we have employed 13C-isotope labeling, systems biology approaches, and in vitro enzyme assays to definitively demonstrate that two WRF, Trametes versicolor and Gelatoporia (Ceriporiopsis) subvermispora, funnel carbon from lignin-derived aromatic compounds into central carbon metabolism via intracellular catabolic pathways [1]. Specifically, 13C-isotopic labeling approaches showed that these WRF utilize poplar-derived aromatic compounds (e.g. 4-hydroxybenzoic acid (4-HBA)) as a carbon source. In silico genome analysis led us to hypothesize a complete catabolic pathway for 4-HBA and identify multiple homologous sequences for enzymes with putative oxidative decarboxylase, hydroxylase, and ring-opening dioxygenase activities, which are among the main biochemical reactions acting on aromatic compounds. Spatial and differential proteomic and metabolomic analyses supported the proposed catabolic pathways and showed alternative catabolic steps in T. versicolor that were not present in G. subvermispora. Based on the in silico, proteomics, and transcriptomics results, we down-selected enzymes for further in vitro characterization, and we have assigned a function to six fungal enzymes (including oxidative decarboxylases, hydroxylases, and ring-opening dioxygenases). Interestingly, even though we selected homologous enzyme pairs from both WRF with similar -omics trends, in a few cases only one of the studied fungi showed activity for the proposed substrate. Based on all the observations from this study [1], we hypothesized that 4-HBA preferentially undergoes oxidative decarboxylation to hydroquinone and subsequent hydroxylation to 1,2,4-benzenetriol in G. subvermispora before ring cleavage, whereas 4-HBA would preferentially undergo hydroxylation to protocatechuate and further oxidative decarboxylation to 1,2,4-benzenetriol in T. versicolor. Examining additional decarboxylases and hydroxylases as well as enzymes from other protein families that can perform the same or similar oxidative reactions, such as cytochromes P450 with aromatic hydroxylation activity, will also be key for elucidating enzyme preferences for specific substrates. Overall, this work forms the foundation of a new research area based on lignin catabolism by WRF, which could be further exploited to convert the undervalued biopolymer lignin into value-added compounds.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Experimental and theoretical insights into the effects of pH on catalysis of bond-cleavage by the lignin peroxidase isozyme H8 from Phanerochaete chrysosporium

Abstract Background Lignin peroxidases catalyze a variety of reactions, resulting in cleavage of both β-O-4′ ether bonds and C–C bonds in lignin, both of which are essential for depolymerizing lignin into fragments amendable to biological or chemical upgrading to valuable products. Studies of the specificity of lignin peroxidases to catalyze these various reactions and the role reaction conditions such as pH play have been limited by the lack of assays that allow quantification of specific bond-breaking events. The subsequent theoretical understanding of the underlying mechanisms by which pH modulates the activity of lignin peroxidases remains nascent. Here, we report on combined experimental and theoretical studies of the effect of pH on the enzyme-catalyzed cleavage of β-O-4′ ether bonds and of C–C bonds by a lignin peroxidase isozyme H8 from Phanerochaete chrysosporium and an acid stabilized variant of the same enzyme. Results Using a nanostructure initiator mass spectrometry assay that provides quantification of bond breaking in a phenolic model lignin dimer we found that catalysis of degradation of the dimer to products by an acid-stabilized variant of lignin peroxidase isozyme H8 increased from 38.4% at pH 5 to 92.5% at pH 2.6. At pH 2.6, the observed product distribution resulted from 65.5% β-O-4′ ether bond cleavage, 27.0% C α -C 1 carbon bond cleavage, and 3.6% C α -oxidation as by-product. Using ab initio molecular dynamic simulations and climbing-image Nudge Elastic Band based transition state searches, we suggest the effect of lower pH is via protonation of aliphatic hydroxyl groups under which extremely acidic conditions resulted in lower energetic barriers for bond-cleavages, particularly β-O-4′ bonds. Conclusion These coupled experimental results and theoretical explanations suggest pH is a key driving force for selective and efficient lignin peroxidase isozyme H8 catalyzed depolymerization of the phenolic lignin dimer and further suggest that engineering of lignin peroxidase isozyme H8 and other enzymes involved in lignin depolymerization should include targeting stability at low pH.

09 BIOMASS FUELS↗
DOE OSTI2020

Electrochemical Lignin Conversion

Lignin is the largest source of renewable aromatic compounds, making the recovery of aromatic compounds from this material a significant scientific goal. Recently, many studies have reported on lignin depolymerization and upgrading strategies. Electrochemical approaches are considered to be low cost, reagent free, and environmentally friendly, and can be carried out under mild reaction conditions. Here, different electrochemical lignin conversion strategies, including electrooxidation, electroreduction, hybrid electro-oxidation and reduction, and combinations of electrochemical and other processes (e.g., biological, solar) for lignin depolymerization and upgrading are discussed in detail. In addition to lignin conversion, electrochemical lignin fractionation from biomass and black liquor is also briefly discussed. Finally, the outlook and challenges for electrochemical lignin conversion are presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Molecular insights into the evolution of woody plant decay in the gut of termites

Plant cell walls represent the most abundant pool of organic carbon in terrestrial ecosystems but are highly recalcitrant to utilization by microbes and herbivores owing to the physical and chemical barrier provided by lignin biopolymers. Termites are a paradigmatic example of an organism’s having evolved the ability to substantially degrade lignified woody plants, yet atomic-scale characterization of lignin depolymerization by termites remains elusive. We report that the phylogenetically derived termite Nasutitermes sp. efficiently degrades lignin via substantial depletion of major interunit linkages and methoxyls by combining isotope-labeled feeding experiments and solution-state and solid-state nuclear magnetic resonance spectroscopy. Exploring the evolutionary origin of lignin depolymerization in termites, we reveal that the early-diverging woodroach Cryptocercus darwini has limited capability in degrading lignocellulose, leaving most polysaccharides intact. Conversely, the phylogenetically basal lineages of “lower” termites are able to disrupt the lignin-polysaccharide inter- and intramolecular bonding while leaving lignin largely intact. These findings advance knowledge on the elusive but efficient delignification in natural systems with implications for next-generation ligninolytic agents.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Accessing monomers from lignin through carbon–carbon bond cleavage

Lignin, the heterogeneous aromatic macromolecule found in the cell walls of vascular plants, is an abundant feedstock for the production of biochemicals and biofuels. Here, many valorization schemes rely on lignin depolymerization, with decades of research focused on accessing monomers through C–O bond cleavage, given the abundance of β–O–4 bonds in lignin and the large number of available C–O bond cleavage strategies. Monomer yields are, however, invariably lower than desired, owing to the presence of recalcitrant C–C bonds whose selective cleavage remains a major challenge in catalysis. In this Review, we highlight lignin C–C cleavage reactions, including those of linkages arising from biosynthesis (β–1, β–5, β–β and 5–5) and industrial processing (5–CH 2 –5 and α–5). We examine multiple approaches to C–C cleavage, including homogeneous and heterogeneous catalysis, photocatalysis and biocatalysis, to identify promising strategies for further research and provide guidelines for definitive measurements of lignin C–C bond cleavage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

The role of catalytic iron in enhancing volumetric sugar productivity during autothermal pyrolysis of woody biomass

Passivation of naturally occurring AAEM in biomass enhances sugar yields from the fast pyrolysis of biomass by preventing these metals from catalyzing the fragmentation of pyranose rings in cellulose and hemicellulose. However, because AAEM also catalyzes lignin depolymerization, its passivation can be accompanied by undesirable char agglomeration. Pretreatment of biomass with ferrous sulfate both passivates AAEM and substitutes ferrous ions as lignin depolymerization catalysts. This pretreatment has been particularly successful for high ash biomass like corn stover, but of limited value for low ash biomass like wood. This study explores the reasons for this discrepancy and offers a combined pretreatment of ferrous sulfate and ferrous acetate pretreatment to overcome char agglomeration in wood. Furthermore, this new pretreatment increased sugar yields from 4.4 wt% to 15.5 wt% and 5.4 wt% to 19.0 wt% for hardwood and softwood biomasses, respectively. This pretreatment produces an iron-rich biochar that catalyzes oxidation of the biochar under the oxygen-rich conditions of autothermal pyrolysis, which is preferentially consumed to provide the enthalpy for pyrolysis, preserving bio-oil as a more desirable energy product. Instead of producing carbon monoxide, which dominates oxidation of biochar from untreated biomass, the iron catalyzes oxidation to carbon dioxide, producing more energy per mole of oxygen consumed. In fact, oxygen demand to support autothermal pyrolysis of red oak and southern yellow pine was reduced 15% by the presence of iron in the biochar.

42 ENGINEERING↗