Search NASA⌕ Search

SEARCH · Search NASA

Results for “Line of Sight”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Contribution of Secondary Neutrinos from Line-of-sight Cosmic-Ray Interactions to the IceCube Diffuse Astrophysical Flux

In 10 years of observations, the IceCube neutrino observatory has revealed a neutrino sky in tension with previous expectations for neutrino point-source emissions. Astrophysical objects associated with hadronic processes might act as production sites for neutrinos, observed as point sources at Earth. Instead, a nearly isotropic flux of astrophysical neutrinos is observed up to PeV energies, prompting a reassessment of the assumed transport and production physics. This work applies a new physical explanation for neutrino production from populations of active galactic nuclei and starburst galaxies to three years of public IceCube point-source data. Specifically, cosmic rays produced at such sources might interact with extragalactic background light and gas along the line of sight, generating a secondary neutrino flux. Furthermore, this model is tested alongside a number of typical flux weighting schemes, in all cases the all-sky flux contribution being constrained to percent levels of the reported IceCube diffuse astrophysical flux.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

The Baryonic Content of Galaxies Mapped by MaNGA and the Gas Around Them

We analyze the cool gas in and around 14 nearby galaxies (at z < 0.1) mapped with the Sloan Digital Sky Survey IV MaNGA survey by measuring absorption lines produced by gas in spectra of background quasars/active galactic nuclei at impact parameters of 0–25 effective radii from the galactic centers. Using Hubble Space Telescope/Cosmic Origins Spectrograph, we detect absorption at the galactic redshift and measure or constrain column densities of neutral (H I, N I, O I, and Ar I), low-ionization (Si II, S II, C II, N II, and Fe II), and high-ionization (Si III, Fe III, N v, and O vI) species for 11 galaxies. We derive the ionization parameter and ionization-corrected metallicity using cloudy photoionization models. The H i column density ranges from ~1013 to ~1020 cm-2 and decreases with impact parameter for r ≳ Re. Galaxies with higher stellar mass have weaker H I absorption. Comparing absorption velocities with MaNGA radial velocity maps of ionized gas line emissions in galactic disks, we find that the neutral gas seen in absorption corotates with the disk out to ~10 R e . Sight lines with lower elevation angles show lower metallicities, consistent with the metallicity gradient in the disk derived from MaNGA maps. Higher-elevation angle sight lines show higher ionization, lower H I column density, supersolar metallicity, and velocities consistent with the direction of galactic outflow. Our data offer the first detailed comparisons of circumgalactic medium (CGM) properties (kinematics and metallicity) with extrapolations of detailed galaxy maps from integral field spectroscopy; similar studies for larger samples are needed to more fully understand how galaxies interact with their CGM.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Measuring the Density Fields around Bright Quasars at z ~ 6 with XQR-30 Spectra

Measuring the density of the intergalactic medium using quasar sight lines in the epoch of reionization is challenging due to the saturation of Ly α absorption. Near a luminous quasar, however, the enhanced radiation creates a proximity zone observable in the quasar spectra where the Ly α absorption is not saturated. In this study, we use 10 high-resolution ( R ≳ 10,000) z ~ 6 quasar spectra from the extended XQR-30 sample to measure the density field in the quasar proximity zones. We find a variety of environments within 3 pMpc distance from the quasars. We compare the observed density cumulative distribution function (CDF) with models from the Cosmic Reionization on Computers simulation and find a good agreement between 1.5 and 3 pMpc from the quasar. This region is far away from the quasar hosts and hence approaching the mean density of the universe, which allows us to use the CDF to set constraints on the cosmological parameter σ 8 = 0.6 ± 0.3. The uncertainty is mainly due to the limited number of high-quality quasar sight lines currently available. Utilizing the more than 200 known quasars at z ≳ 6, this method will allow us to tighten the constraint on σ 8 to the percent level in the future. In the region closer to the quasar within 1.5 pMpc, we find that the density is higher than predicted in the simulation by 1.23 ± 0.17, suggesting that the typical host dark matter halo mass of a bright quasar ( M 1450 < -26.5) at z ~ 6 is .

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

3D Modeling of Safety-Related Upgrade Pilot Project

Constellation Energy and the United States Department of Energy (DOE) have established a public/private partnership to implement a pilot digital upgrade to replace legacy analog, safety-related reactor protection and emergency safety feature actuation systems (RPS/ESFAS) with modern digital systems. This effort is occurring at Constellation’s Limerick Generating Station. This project is being performed in accordance with industry processes that have been adapted to better support digital upgrades. These processes include IP-ENG-001, Standard Design Process, NISP-EN-04, Standard Digital Engineering Process and Electric Power Research Institute Report 3002011816, Digital Engineering Guide. The Light Water Reactor Sustainability (LWRS) Program at the Idaho National Laboratory (INL) has been supporting this effort. Latest INL HFE efforts in support of this project have focused on definition and implementation of the Human Factors Engineering (HFE) Program in support of Constellation design and related licensing efforts. This paper will present the development of the HFE 3D modeling execution of the Main Control Room safety upgrades. New equipment and modifications are planned for upgrading the new safety systems. 3D modeling allows for visualization of the new equipment and modifications to be shared with engineering and design teams for evaluation and review. Anthropometric considerations such as sight lines and functional reach can be evaluated directly using the 3D model. This effort has helped to provide visualizations for additional review with operations personnel and project stakeholders.

3D Modeling↗
DOE OSTI2022

Design of a multi-detector, single line-of-sight, time-of-flight system to measure time-resolved neutron energy spectra

In the dynamic environment of burning, thermonuclear deuterium–tritium plasmas, diagnosing the time-resolved neutron energy spectrum is of critical importance. Strategies exist for this diagnosis in magnetic confinement fusion plasmas, which presently have a lifetime of ~10 12 longer than inertial confinement fusion (ICF) plasmas. In this work, we present a novel concept for a simple, precise, and scale-able diagnostic to measure time-resolved neutron spectra in ICF plasmas. The concept leverages general tomographic reconstruction techniques adapted to time-of-flight parameter space, and then employs an updated Monte Carlo algorithm and National Ignition Facility-relevant constraints to reconstruct the time-evolving neutron energy spectrum. Reconstructed spectra of the primary 14.028 MeV n DT peak are in good agreement with the exact synthetic spectra. The technique is also used to reconstruct the time-evolving downscattered spectrum, although the present implementation shows significantly more error.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Ionospheric Transfer Function Tests: Line of Sight and Slab

Ionospheric transfer function (ITF) algorithms determine the effects of the ionosphere on an electromagnetic (EM) signal as it propagates through. In this report, analytic formulas are derived which can be used to compare results of ITF calculations from certain algorithms.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Fast response, optical radiance measurements of low intensity impurity emission in WEST plasmas with staggered wavelength filters

Fast response acquisition of atomic line emission through the use of a filterscope has been implemented on the WEST tokamak at multiple poloidal locations. Filterscopes consist of a fiber-optic-based transmission from the tokamak to specifically engineered optical bandpasses and photomultiplier tubes (PMT) that collect the emission intensity to measure a radiance, L [W/cm2/str], over the specified bandpass. This diagnostic records plasma-wall interaction (PWI) properties (e.g. impurity emission and recycling of main fuel ions) up to a max acquisition rate of 100 kHz. These PMT radiometric measurements are calibrated into a line-normalized radiance, LN [photons/sec/cm2/str], similar to traditional spectrometers, which can later be converted to a particle flux. Low intensity emission peaks are difficult to quantify due to often comparable continuum levels, thus a secondary filter shifted to a judiciously-selected, line-free region (~1 nm away) allows for background subtraction. The system currently installed on WEST targets tungsten (W) gross sputtering specifically by monitoring, with a filter pair, the spectral region near the neutral W line emission (W I 400.9 nm). The line and background filters of the pair are centered at 400.6 nm and 403.1 nm, respectively. Through a set beam splitters on each sight line, the filter pair are measuring from the same location. The two L signals near W I are then subtracted from each other yielding only the W I LN. W I LN data from a recent WEST experimental campaign is presented and compared with plasma parameters and traditional spectrometer measurements of W I line emission to demonstrate the capabilities of this staggered-filter filterscope method. Specifically, the choice of WEST-specific bandpass curves for the W I LN will be illustrated based on this latter comparison.

Neff, Anton↗
DOE OSTI2020

Revisiting the Detection of Optical Lightning Superbolts

This study uses Fast On-Orbit Detection of Transient Events (FORTE) satellite observations to identify superbolt-class optical lightning events and evaluate their origins. Superbolts have been defined by Turman as lightning pulses whose peak optical power exceeds 1011 W. However, it has been unclear whether superbolts resulted from particular types of high-energy lightning process or whether they were the result of measurement bias. In the latter case, any decently bright lightning process could be recorded as a superbolt if the sensor had a particularly clear sight line to the hot channel without thick clouds diluting the optical signals. Here, our 12-year analysis of FORTE superbolt detections indicates that the lower optical superbolt energy range (~100 GW) is dominated by normal lightning, but brighter cases are predominantly strong +CG strokes that originate from specific types of storms. Oceanic storm systems, particularly during the winter, and especially those located around Japan are shown to produce these intense superbolts. We suggest that some optical superbolts result from favorable viewing conditions and would not be identified as such by another instrument located elsewhere and that others are associated with a unique set of physics that may merit the “superbolt” distinction.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Strong nebular emissions associated with Mg ii absorptions detected in the SDSS spectra of background quasars

ABSTRACT We present long-slit spectroscopic observations of 40 Galaxy On Top of Quasars (GOTOQs) at ${0.37 \leqslant z \leqslant 1.01}$ using the South African Large Telescope. Using this and available photometric data, we measure the impact parameters of the foreground galaxies to be in the range of 3–16 kpc with a median value of 8.6 kpc. This is the largest sample of galaxies producing Mg ii absorption at such low impact parameters. These quasar–galaxy pairs are ideal for probing the disc–halo interface. At such impact parameters, we do not find any anticorrelation between rest equivalent width (REW) of Ca ii, Mn ii, Fe ii, Mg ii, and Mg i absorption and impact parameter. These sight lines are typically redder than those of strong Mg ii absorbers, with the colour excess, E(B − V) for our sample ranging from −0.191 to 0.422, with a median value of 0.058. In the E(B − V) versus W3935 plane, GOTOQs occupy the same region as Ca ii absorbers. For a given E(B − V), we find larger W3935 than what has been found in the Milky Way, probably due to a smaller dust-to-gas ratio in GOTOQs. Galaxy parameters could be measured for twelve cases, and their properties seem to follow the trends found for strong Mg ii absorbers. Measuring the host galaxy properties for the full sample using HST photometry or AO-assisted ground-based imaging is important to gain insights into the relationship between the stellar mass of galaxies and the metal line REW distributions at low impact parameters.

Astronomy & Astrophysics↗
DOE OSTI2021

Spectroscopic Observations of Obscured Populations in the Inner Galaxy: 2MASS-GC02, Terzan 4, and the 200 km s{sup −1} stellar peak

The interpretation of potentially new and already known stellar structures located at low latitudes is hindered by the presence of dense gas and dust, as observations toward these sight lines are limited. We have identified Apache Point Observatory Galaxy Evolution Experiment (APOGEE) stars belonging to the low-latitude globular clusters 2MASS-GC02 and Terzan 4, presenting the first chemical element abundances of stars residing in these poorly studied clusters. As expected, the signature of multiple populations coexisting in these metal-rich clusters is evident. We redetermine the radial velocity of 2MASS-GC02 to be −87 ± 7 km s{sup −1}, finding that this cluster’s heliocentric radial velocity is offset by more than 150 km s{sup −1} from the literature value. We investigate a potentially new low-latitude stellar structure and a kiloparsec-scale nuclear disk (or ring) that has been put forward to explain a high-velocity (V {sub GSR} ∼ 200 km s{sup −1}) peak reported in several Galactic bulge fields based on the APOGEE commissioning observations. New radial velocities of field stars at (l, b) = (−6°,0 °) are presented and combined with the APOGEE observations at negative longitudes to carry out this search. Unfortunately no prominent −200 km s{sup −1} peak at negative longitudes along the plane of the Milky Way are apparent, as predicted for the signature of a nuclear feature. The distances and Gaia EDR3 proper motions of the high-V {sub GSR} stars do not support the current models of stars on bar-supporting orbits as an explanation of the +200 km s{sup −1} peak.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

TARDIS. II. Synergistic Density Reconstruction from Lyα Forest and Spectroscopic Galaxy Surveys with Applications to Protoclusters and the Cosmic Web

Looking at this work, we expand upon the Tomographic Absorption Reconstruction and Density Inference Scheme (TARDIS) in order to include multiple tracers while reconstructing matter density fields at Cosmic Noon (z ~ 2–3). In particular, we jointly reconstruct the underlying density field from simulated Lyα forest observations at z ~ 2.5 and an overlapping galaxy survey. We find that these data are synergistic, with the Lyα forest providing reconstruction of low-density regions and galaxy surveys tracing the density peaks. We find a more accurate power spectra reconstruction going to higher scales when fitting these two data sets simultaneously than when using either one individually. When applied to cosmic web analysis, we find that performing the joint analysis is equivalent to an Lγα survey with significantly increased sight-line spacing. Because we reconstruct the velocity field and matter field jointly, we demonstrate the ability to evolve the mock observed volume further to z = 0, allowing us to create a rigorous definition of a “protocluster” as regions that will evolve into clusters. We apply our reconstructions to study protocluster structure and evolution, finding for realistic survey parameters that we can provide accurate mass estimates of the z ≈ 2 structures and their z = 0 fate.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Cosmic Reionization on Computers: Statistics, Physical Properties, and Environments of Lyman Limit Systems at z ~ 6

Lyman limit systems (LLSs) are dense hydrogen clouds with high enough H i column densities to absorb Lyman continuum photons emitted from distant quasars. Their high column densities imply an origin in dense environments; however, the statistics and distribution of LLSs at high redshifts still remain uncertain. In this paper, we use self-consistent radiative transfer cosmological simulations from the Cosmic Reionization on Computers (CROC) project to study the physical properties of LLSs at the tail end of cosmic reionization at z ~ 6. We generate 3000 synthetic quasar sight lines to obtain a large number of LLS samples in the simulations. In addition, with the high physical fidelity and resolution of CROC, we are able to quantify the association between these LLS samples and nearby galaxies. Our results show that the fraction of LLSs spatially associated with nearby galaxies increases with H i column density. Moreover, we find that LLSs that are not near any galaxy typically reside in filamentary structures connecting neighboring galaxies in the intergalactic medium (IGM). This quantification of the distribution and association of LLSs to large-scale structure informs our understanding of the IGM–galaxy connection during the "Epoch of Reionization," and provides a theoretical basis for interpreting future observations.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Real-time moving platform management system

Systems and methods are disclosed including a moving platform system suitable for mounting and use on a moving platform for communicating in real-time, comprising: a position system monitoring location of the moving platform and generating a sequence of time-based position data; a non-line of sight communication system; a high-speed line of sight communication system; and a computer system monitoring an availability of the non-line of sight communication system and the high-speed line of sight communication system and initiating connections when the non-line of sight communication system and the high-speed line of sight communication system are available, and receiving the sequence of time-based position data and transmitting the sequence of time-based position data via the at least one of the currently available non-line of sight communication system and the high-speed line of sight communication system.

Giuffrida, Frank D.↗