Search NASA⌕ Search

SEARCH · Search NASA

Results for “Linear Response Time-dependent Density Functional Theory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Revealing quasi-excitations in the low-density homogeneous electron gas with model exchange–correlation kernels

Time-dependent density functional theory within the linear response regime provides a solid mathematical framework to capture excitations. The accuracy of the theory, however, largely depends on the approximations for the exchange–correlation (xc) kernels. Away from the long-wavelength (or q = 0 short wave-vector) and zero-frequency (ω = 0) limit, the correlation contribution to the kernel becomes more relevant and dominant over exchange. The dielectric function, in principle, can encompass xc effects relevant to describe low-density physics. Furthermore, besides collective plasmon excitations, the dielectric function can reveal collective electron–hole excitations, often dubbed “ghost excitons.” Besides collective excitons, the physics of the low-density regime is rich, as exemplified by a static charge-density wave that was recently found for r s > 69, and was shown to be associated with softening of the plasmon mode. These excitations are seen to be present in much higher density 2D homogeneous electron gases of r s ≳ 4. Here, in this work, we perform a thorough analysis with xc model kernels for excitations of various nature. The uniform electron gas, as a useful model of real metallic systems, is used as a platform for our analysis. We highlight the relevance of exact constraints as we display and explain screening and excitations in the low-density region.

36 MATERIALS SCIENCE↗

Investigation of plasmon relaxation mechanisms using nonadiabatic molecular dynamics

Hot carriers generated from the decay of plasmon excitation can be harvested to drive a wide range of physical or chemical processes. However, their generation efficiency is limited by the concomitant phonon-induced relaxation processes by which the energy in excited carriers is transformed into heat. However, simulations of dynamics of nanoscale clusters are challenging due to the computational complexity involved. Here, in this paper, we adopt our newly developed Trajectory Surface Hopping (TSH) nonadiabatic molecular dynamics algorithm to simulate plasmon relaxation in Au 20 clusters, taking the atomistic details into account. The electronic properties are treated within the Linear Response Time-Dependent Tight-binding Density Functional Theory (LR-TDDFTB) framework. The relaxation of plasmon due to coupling to phonon modes in Au 20 beyond the Born–Oppenheimer approximation is described by the TSH algorithm. The numerically efficient LR-TDDFTB method allows us to address a dense manifold of excited states to ensure the inclusion of plasmon excitation. Starting from the photoexcited plasmon states in Au 20 cluster, we find that the time constant for relaxation from plasmon excited states to the lowest excited states is about 2.7 ps, mainly resulting from a stepwise decay process caused by low-frequency phonons of the Au 20 cluster. Furthermore, our simulations show that the lifetime of the phonon-induced plasmon dephasing process is ~10.4 fs and that such a swift process can be attributed to the strong nonadiabatic effect in small clusters. Our simulations demonstrate a detailed description of the dynamic processes in nanoclusters, including plasmon excitation, hot carrier generation from plasmon excitation dephasing, and the subsequent phonon-induced relaxation process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sparse-Stochastic Fragmented Exchange for Large-Scale Hybrid Time-Dependent Density Functional Theory Calculations

Here we extend our recently developed sparse-stochastic fragmented exchange formalism for ground-state near-gap hybrid DFT to calculate absorption spectra within linear-response time-dependent generalized Kohn-Sham DFT (LR-GKS-TDDFT) for systems consisting of thousands of valence electrons within a grid-based/plane-wave representation. A mixed deterministic/fragmented-stochastic compression of the exchange kernel, here using long-range explicit exchange functionals, provides an efficient method for accurate optical spectra. Both real-time propagation as well as frequency-resolved Casida-equation-type approaches for spectra are presented, and the method is applied to large molecular dyes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Screened Range-Separated Hybrid Functional with Polarizable Continuum Model Overcomes Challenges in Describing Triplet Excitations in the Condensed Phase Using TDDFT

Long range-corrected (LRC) or range-separated hybrid (RSH) functionals where the long-range (LR) limit of electronic interactions is set to the exact exchange have been shown to correct the tendency of traditional density functional theory (DFT) to underestimate the frontier orbital gap. Consequently, the use of such functionals in calculating electronic excited states using linear response based time-dependent DFT (TDDFT) has been successful in correcting the tendency for underestimating the energies of charge transfer states by DFT-based calculations. More recently formulations of functionals that attenuate the LR limit to address condensed-phase effects to polarize the electronic density have been reported. In particular screened RSH (SRSH) combined with polarizable continuum model (PCM) was benchmarked successfully in reproducing the fundamental gap and charge transfer state energies of molecular systems in the condensed phase. Here we use SRSH-PCM to address triplet excited states, and show its success in obtaining correspondence of the low-lying triplet states to the singlet–triplet gap in a similar way that the fundamental orbital gap corresponds to electron removal and addition energies. Importantly, the accuracy of the SRSH-PCM in calculating triplet excitations stands on the polarization consistent framework in addressing the scalar dielectric constant and without affecting the optimal tuning by triplet energies. Finally, the prospect of even further improving the SRSH-PCM accuracy in calculating triplet states can be achieved by optimal tuning on the basis of the spin multiplicity gap.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

ORNL_AISD-Ex: Quantum chemical prediction of UV/Vis absorption spectra for over 10 million organic molecules

We performed calculations of electronic excitation energies and associated oscillator strengths based on the time-dependent density-functional tight-binding (TD-DFTB) method [1]. The SMILES (Simplified molecular-input line-entry system) strings of the molecules from the AISD HOMO-LUMO database [2] were converted to a 3D atomistic structure and stored in a PDB file after preliminary geometry optimization using the Merck Molecular Force Field (MMFF94) in RDKit [3,4]. The primary information stored in the PDB file archive consists of Cartesian coordinates for each atom of the molecule in their 3D location in space, along with summary information about the structure, sequence, and experiment. We then performed molecular geometry optimization using the density-functional tight-binding (DFTB) method [5] in the electronic ground state, followed by single-point excited states calculations, as described below. We note that, since RDKit employs a random choice for the generation of molecular conformers, the molecular geometries obtained in this dataset could be different from the ones that were generated when the AISD HOMO-LUMO dataset was generated. The computed excitation energies and associated oscillator strengths can be converted to predict UV/Vis absorption spectra, where excitation energies correspond to absorption peak positions, and oscillator strengths are a good measure of the probability of absorption of visible or UV light in transitions between electronic ground and excited states. The conversion of SMILES strings to 3D Cartesian coordinates of fully DFTB-optimized molecules was successful for 10,502,904 out of 10,502,917 molecules. For these molecules, both geometry optimizations and excited states calculations were successful. The DFTB calculations did not complete for 13 molecules of the original AISD HOMO-LUMO dataset. We still provide information about the geometry of these molecules. The molecules are diverse for chemical compositions (which span 5 non-hydrogen elements: oxygen, carbon, nitrogen, fluorine, sulfur) and molecular size (the smallest molecule contains 5 non-hydrogen atoms, and the largest molecule contains 71 non-hydrogen atoms). The DFTB method [5] is an approximation to density functional theory (DFT), utilizing a minimal basis set in conjunction with a two-center approximation to the electronic Hamiltonian and overlap matrix elements. The DFTB total energy is the sum of an electronic and a repulsive energy contribution, and their calculation requires optimized electronic parameters and diatomic repulsive potential energy functions. All DFTB calculations were performed using the DFTB+ code [6] (version 21.2) and the wrapper for DFTB+ in the Atomic Simulation Environment (ASE) (version 3.22.1) [7], which performed an internal conversion of Cartesian coordinates from PDB to the .gen file format. For the geometry optimizations on the electronic ground state potential energy surface of the molecules, we have chosen the third-order DFTB (DFTB3) method [5c] and employed the matching 3ob set of electronic parameters and repulsive potentials [8]. The empirical γ-damping for hydrogen bond correction, and Grimme's D3 empirical dispersion correction with Becke-Johnson damping (D3(BJ)) [9] dispersion correction was included to improve the description of non-covalent interactions. For excited states single-point energy calculations, we employed the TD-DFTB method in conjunction with the DFTB2 method [5b] and the matching mio [5b,10] and halorg [11] parameter sets. We opted to request the simultaneous calculation of 50 excited states for singlet transition to investigate sufficient number of excited states, based on linear response theory using the Casida equation [Ref: T. A. Niehaus, S. Suhai, F. Della Sala, P Lugli, M. Elstner, G. Seifert, and Th. Frauenheim. Tight-binding approach to time-dependent density-functional response theory. Phys. Rev. B, 63:085108, 2001] and the ARPACK diagonalizer [R. B. Lehoucq, D. C. Sorensen, and C. Yang. Arpack users guide: Solution of large-scale eigenvalue problems by implicitly restarted arnoldi methods, 1997. 46, 51]. The dataset contains 1001 tar.gz files. Tar files are named as “ornl_aisd_ex_1.tar.gz†through “ornl_aisd_ex_1000.tar.gzâ€. Additionally, the 13 failed molecules are in “ornl_aisd_ex_unprocessed.tar.gzâ€. Except for the tar files listed below, each tar file contains 10,500 molecules. Tar files numbered 34, 121, 128, 352, 360, 429, 495, 509, 518, 627, 676, 668, and 862 contain 10,499 molecules each. The last tar file numbered 1000 contains 13,417 molecules. The total size of the uncompressed dataset is over 283 Gigabytes. The code for calculating the electronic excitation energies and statistical analysis of the dataset is provided at the following GitLab repository: https://github.com/ORNL/Analysis-of-Large-Scale-Molecular-Datasets-with-Python Calculating the UV spectrum of a molecule requires performing 3 main operations: 1. Converting the smiles string representation of a molecule into a geometric structure where each atom is assigned XYZ coordinates. The geometric structure is written to the file smiles.pdb. 2. Using smiles.pdb to compute the relaxed geometry of the molecule, which corresponds with the position of the atoms at the position of equilibrium at the ground state. This generates the files band.out, detailed.out, and geo_end.gen. 3. Using geo_end.gen to calculate the UV spectrum of the molecule which is written into the file EXC.DAT. Every molecule in the dataset has its own directory. The files contained in each molecule directory are as follows: 1. geo_end.gen 2. detailed.out 3. band.out 4. EXC.DAT 5. smiles.pdb REFERENCES [1] Niehaus, T. A.; Suhai, S.; Della Salla, F.; Lugli, P.; Elstner, M.; Seifert, G.; Frauenheim, Th. Tight-binding approach to time-dependent density-functional response theory. Phys. Rev. B, 2001, 63, 085108/1-9. [2] Blanchard, A.; Gounley, J.; Metha, K.; Yoo, P.; Irle, S. AISD HOMO-LUMO. DOI: 10.13139/ORNLNCCS/1869409 [3] RDKit: Cheminformatics and Machine Learning Software. 2013, [http://www.rdkit.org] [4] Tosco, P.; Stiefl, N. and Landrum, G. Bringing the MMFF force field to the RDKit: implementation and validation. J Cheminform. 2014, 6, 1–4. [5] a) Porezag, D.; Frauenheim, T.; Kohler, T.; Seifert, G.; Kaschner, Construction of tight-binding-like potentials on the basis of density-functional theory: Application to carbon, R. Phys. Rev. B 1995, 51, 12947-12957; b) Elstner, M.; Porezag, D.; Jungnickel, G.; Elsner, J.; Haugk, M.; Frauenheim, Th.; Suhai, S.; Seifert, G.; Phys. Rev. B 1998, 58, 7260-7268; c) Gaus, M.; Cui, Q.; Elstner, M. DFTB3: Extension of the Self-Consistent-Charge Density-Functional Tight-Binding Method (SCC-DFTB), J. Chem. Theory Comput. 2011, 7, 931-948; d) Cui, Q.; Elstner, M. Density functional tight binding: values of semi-empirical methods in an ab initio era, Phys. Chem. Chem. Phys. 2014, 16, 14368-14377. [6] Hourahine, B. et al. DFTB+, a software package for efficient approximate density functional theory based atomistic simulations, J. Chem. Phys. 2020, 152, 124101/1-19. [7] Larsen, A. H. et al. The atomic simulation environment—a Python library for working with atoms. J. Phys.: Cond. Matter 2017, 29, 273002. [8] Kubillus, M.; Kubar, T.; Gaus, M.; Rezac, J.; Elstner, M. Parameterization of the DFTB3 Method for Br, Ca, Cl, F, I, K, and Na in Organic and Biological Systems, J. Chem. Theory Comput. 2015, 11, 332-342. [9] Brandenburg, J. G.; Grimme, S. Accurate Modeling of Organic Molecular Crystals by Dispersion-Corrected Density Functional Tight Binding (DFTB), J. Phys. Chem. Lett. 2014, 5, 1785−1789. [10] a) Niehaus, T. A.; Elstner, M.; Frauenheim, Th.; Suhai, S. Application of an approximate density-functional method to sulfur containing compounds. J. Mol. Struct.: THEOCHEM 2001, 541, 185-94; b) Elstner, M.; Hobza, P.; Frauenheim, Th.; Suhai, S.; Kaxiras, E. Hydrogen bonding and stacking interactions of nucleic acid base pairs: A density-functional-theory based treatment. J. Chem. Phys. 2001, 114, 5149-55. [11] Kubar, T.; Bodrog, Z.; Gaus, M.; Köhler, C.; Aradi, B.; Frauenheim, Th.; Elstner, M. Parametrization of the SCC-DFTB Method for Halogens. J. Chem. Theory Comput. 2013, 9, 2939-49.

36 MATERIALS SCIENCE↗

Electron-Affinity Time-Dependent Density Functional Theory: Formalism and Applications to Core-Excited States

The lack of particle-hole attraction and orbital relaxation within time-dependent density functional theory (TDDFT) lead to extreme errors in the prediction of K-edge X-ray absorption spectra (XAS). We derive a linear-response formalism that uses optimized orbitals of the n - 1-electron system as the reference, building orbital relaxation and a proper hole into the initial density. Here, our approach is an exact generalization of the static-exchange approximation that ameliorates the particle-hole interaction error associated with the adiabatic approximation and reduces errors in TDDFT XAS by orders of magnitude. With a statistical performance of just 0.5 eV root-mean-square error and the same computational scaling as TDDFT under the core-valence separation approximation, we anticipate that this approach will be of great utility in XAS calculations of large systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Progress towards understanding ultranonlocality through the wave-vector and frequency dependence of approximate exchange-correlation kernels

In the framework of time-dependent density functional theory (TDDFT), the exact exchange-correlation (xc) kernel f xc (n, q, ω) determines the ground-state energy, excited-state energies, lifetimes, and the time-dependent linear density response of any many-electron system. The recently developed MCP07 xc kernel f xc (n, q, ω) of A. Ruzsinszky et al. [Phys. Rev. B 101, 245135 (2020)] yields excellent uniform electron gas (UEG) ground-state energies and plausible plasmon lifetimes. As MCP07 is constructed to describe f xc of the UEG, it cannot capture optical properties of real materials. To verify this claim, we follow Nazarov et al. [Phys. Rev. Lett. 102, 113001 (2009)] to construct the long-range, dynamic xc kernel, lim q→0 f xc (n, q, ω) = -α(ω)e 2 /q 2 , of a weakly inhomogeneous electron gas, using MCP07 and other common xc kernels. The strong wavevector and frequency dependence of the “ultranonlocality” coefficient α(ω) is demonstrated for a variety of simple metals and semiconductors. We examine how imposing exact constraints on an approximate kernel shapes α(ω). Comparisons to kernels derived from correlated-wavefunction calculations are drawn.

36 MATERIALS SCIENCE↗

Orbital-resolved calculations of two-center interferences in linear triatomic molecules

In this report we perform ab initio calculations of high-harmonic spectroscopy (HHS) of two-center interference phenomena in oriented carbon-dichalcogen molecules, using time-dependent density functional theory (TDDFT). We show that by resolving the harmonic response into contributions from individual Kohn-Sham orbitals, we can extract target-specific characteristics for both the spectral amplitude and phase. We also discuss that this extraction is predicated on a careful analysis and normalization of the harmonic spectrum. Finally, we present field-free scattering calculations that mimic the recollision step in high-order-harmonic generation and allow the calculation of recombination dipole matrix elements without explicitly calculating the scattering states of a molecule. We show that the orbital-resolved TDDFT HHS results and results based on our field-free scattering calculations are in very good agreement with each other.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Strengths of plasmon satellites in XPS: Real-time cumulant approach

Plasmon satellites observed in x-ray photoemission spectra (XPS) reflect many-body effects beyond the single-electron approximation. However, theoretical calculations are challenging and simplified theories based on electron gas models are not always satisfactory. Here, a cumulant Green’s function approach with a real-time time-dependent density functional theory calculation of the cumulant is described for calculations of these effects, without the need for adjustable parameters. Here, the approach yields good agreement with experimental XPS results, as illustrated for Ge and Al. Corrections due to extrinsic losses and interference are also briefly discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The TDHF code Sky3D version 1.2

The Sky3D code has been widely used to describe nuclear ground states, collective vibrational excitations, and heavy-ion collisions. The approach is based on Skyrme forces or related energy density functionals. The static and dynamic equations are solved on a three-dimensional grid, and pairing is been implemented in the BCS approximation. This updated version of the code aims to facilitate the calculation of nuclear strength functions in the regime of linear response theory, while retaining all existing functionality and use cases. The strength functions are benchmarked against available RPA codes, and the user has the freedom of choice when selecting the nature of external excitation (from monopole to hexadecapole and more). Some utility programs are also provided that calculate the strength function from the time-dependent output of the dynamic calculations of the Sky3D code.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Second Linear Response Theory and the Analytic Calculation of Excited-State Properties

We present a method based on second linear response time-dependent density func- tional theory (TDDFT) to calculate permanent and transition multipoles of excited states, which are required to compute excited-state absorption/emission spectra, multi- photon optical processes, among others. In previous work, we examined computations based on second linear response theory in which linear response TDDFT was employed twice. In contrast, the present methodology only requires information from a single linear response calculation to compute the excited-state properties. These are eval- uated analytically through various algebraic operations involving electron repulsion integrals and excitation vectors. The present derivation focuses on full many-body wave functions instead of single orbitals, as in our previous approach. Here, we test the proposed method by applying it to several diatomic and triatomic molecules. This shows that the computed excited-state dipoles are consistent with respect to reference equation-of-motion coupled cluster calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Internal Conversion between Bright (1 1 B $^+_u$) and Dark (21 A $^-_g$) States in s- trans -Butadiene and s- trans -Hexatriene

Internal conversion (IC) between the two lowest singlet excited states, 1 1 B$_u^+$ and 2 1 A$_g^–$, of s-trans-butadiene and s-trans-hexatriene is investigated using a series of single- and multi- reference wave function and density functional theory (DFT) methodologies. Three independent types of the equation-of-motion coupled-cluster (EOMCC) theory capable of providing an accurate and balanced description of one- as well as two-electron transitions, abbreviated as δ-CR-EOMCC(2,3), DIP-EOMCC(4h2p){N o }, and DEA-EOMCC(4p2h){N u } or DEA-EOMCC(3p1h,4p2h){N u }, consistently predict that the 1 1 B$_u^+$/2 1 A$_g^–$ crossing in both molecules occurs along the bond length alternation coordinate. However, the analogous 1 1 B$_u^+$ and 2 1 A$_g^–$ potentials obtained with some multireference approaches, such as CASSCF and MRCIS(D), as well as with the linear-response formulation of time-dependent DFT (TDDFT), do not cross. Hence, caution needs to be exercised when studying the low-lying singlet excited states of polyenes with conventional multiconfigurational methods and TDDFT. The multistate many-body perturbation theory methods, such as XMCQDPT 2 , do correctly reproduce the curve crossing. Among the simplest and least expensive computational methodologies, the DFT approaches that incorporate the contributions of doubly excited configurations, abbreviated as MRSF (mixed reference spin-flip) TDDFT and SSR( 4,4 ), accurately reproduce our best EOMCC results. This is highly promising for nonadiabatic molecular dynamics simulations in larger systems.

36 MATERIALS SCIENCE↗

Computing nuclear response functions with time-dependent coupled-cluster theory

We compute nuclear response functions by solving the time-dependent 𝐴-body Schrödinger equation, recording the time-dependent transition moment and extracting spectral information via Fourier transforms. The solution of the time-dependent many-body problem accounts for correlations on top of the mean field by taking advantage of a time-dependent formulation of coupled-cluster theory. As a validation, we focus on electric dipole transitions in 4 He and 16 O and compare moments of the response function distribution to the results of an equivalent static framework, finding negligible discrepancies. We investigate how proton and neutron densities evolve in time, and we see the traditional picture of soft and giant dipole resonances as collective oscillations of protons and neutrons emerging from our calculations in 16 O and 24 O. Furthermore, this method also allows us to investigate the behavior of the nucleus in the presence of a strong electric field. In that regime, the behavior of the system becomes chaotic. Qualitatively, the spectral information obtained in this limit is in line with previous time-dependent mean-field results.

Ab initio calculations↗

Changes in polarization dictate necessary approximations for modeling electronic deexcitation intensity: Application to x-ray emission

Accurate simulation of electronic excitations and deexcitations are critical for complementing complex spectroscopic experiments and can provide validation to theoretical approaches. Here, using a generalized framework, we contrast the accuracy and validity of orbital-constrained and linear-response approaches that build upon Kohn-Sham density functional theory (DFT) to simulate emission spectra of electronic origin and propose an efficient approximation, named many-body x-ray emission spectroscopy or MBXES, for simulating such processes. We show analytically as well as with computed examples that for electronic (de)excitation leading to an appreciable change in polarization (i.e., density rearrangement), the adiabatic approximation in a response-based formalism will be inadequate for the calculation of oscillator strength. Thus, such a change (e.g., in the net electrostatic dipole moment of a finite system) can be used as a metric for evaluating the applicability of the adiabatic response-based approach and can be particularly valuable in x-ray emission spectroscopy. On the other hand, MBXES, the flexible method introduced in this paper, can compute oscillator strengths accurately at a much lower computational expense on the basis of two DFT-based self-consistent field calculations. Using illustrative examples of emission spectra, the efficacy of the MBXES method is demonstrated by comparison with its parent theory, orbital-optimized DFT, and with experiments.

74 ATOMIC AND MOLECULAR PHYSICS↗

First-principles wave-vector- and frequency-dependent exchange-correlation kernel for jellium at all densities

Here we propose a spatially and temporally nonlocal exchange correlation (XC) kernel for the spin-unpolarized fluid phase of ground-state jellium for use in time-dependent density functional and linear response calculations. The kernel is constructed to satisfy known properties of the exact XC kernel to accurately describe the correlation energies of bulk jellium and to satisfy frequency-moment sum rules at a wide range of bulk jellium densities, including those low densities that display strong correlation and symmetry breaking. These effects are easier to understand in the simple jellium model than in real systems. All exact constraints satisfied by the recent MCP07 kernel are maintained in the revised MCP07 (rMCP07) kernel, while others are added. The revision $f^{rMCP07}_{XC}$ (q, ω) differs from MCP07 only for nonzero frequencies ω. Only at densities much lower than those of real bulk metals is the frequency dependence of the kernel important for the correlation energy of jellium. As the wave vector q tends to zero, the kernel has a -4$πα(ω)/q^2$ divergence whose frequency-dependent ultranonlocality coefficient $α(ω)$ vanishes in jellium, and is predicted by rMCP07 to be extremely small for the real metals Al and Na.

36 MATERIALS SCIENCE↗

Correlation between Spin and Orbital Dynamics during Laser-Induced Femtosecond Demagnetization

Spin and orbital angular momenta are two intrinsic properties of an electron and are responsible for the physics of a solid. How the spin and orbital evolve with respect to each other on several hundred femtoseconds is largely unknown, but it is at the center of laser-induced ultrafast demagnetization. In this paper, we introduce a concept of the spin–orbital correlation diagram, where spin angular momentum is plotted against orbital angular momentum, much like the position-velocity phase diagram in classical mechanics. We use four sets of highly accurate time-resolved X-ray magnetic circular dichroism data to construct four correlation diagrams for iron and cobalt. To our surprise, a pattern emerges. The trace on the correlation diagram for iron is an arc, and at the end of demagnetization, it has a pronounced cusp. The correlation diagram for cobalt is different and appears more linear but with kinks. We carry out first-principles calculations with two different methods: time-dependent density functional theory (TDDFT) and time-dependent Liouville density functional theory. These two methods agree that the experimental findings for both Fe and Co are not due to experimental errors. It is the spin–orbit coupling that correlates the spin dynamics to the orbital dynamics. Microscopically, Fe and Co have different orbital occupations, which leads to distinctive correlation diagrams. We believe that this correlation diagram presents a useful tool to better understand spin and orbital dynamics on an ultrafast time scale. A brief discussion on the magnetic anisotropy energy is also provided.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simulations of x-ray absorption spectra for CO desorbing from Ru(0001) with transition-potential and time-dependent density functional theory approaches

The desorption of a carbon monoxide molecule from a Ru(0001) surface was studied by means of X-ray Absorption Spectra (XAS) computed with Transition Potential (TP-DFT) and Time Dependent (TD-DFT) DFT methods. By unraveling the evolution of the CO electronic structure upon desorption, we observed that at 2.3 Å from the surface, the CO molecule has already predominantly gas-phase character. While C 1s XAS is quite insensitive to changes in the C–O bond length, the O 1s excitation is very sensitive with the π* coming down in energy upon CO bond stretching, which competes with the increase in orbital energy due to the repulsive interaction with the metallic surface. We show in a systematic way that the TP-DFT method can describe the XAS rather well at the endpoints (chemisorbed and gas phase) but is affected by artificial charge transfer and/or incorrect spin treatment in the transition region in cases like CO, where there are low-lying π* orbitals and large exchange interactions between the core 1s and valence-acceptor π* orbitals. As an alternative, we demonstrate by comparing with experimental data that a linear response approach using TD-DFT employing common exchange-correlation functionals and finite-size clusters can yield a good description of the spectral evolution of the 1s → π* transition with correct spin and gas-to-chemisorbed chemical shifts in good agreement with experiment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hole–hole Tamm–Dancoff-approximated density functional theory: A highly efficient electronic structure method incorporating dynamic and static correlation

The study of photochemical reaction dynamics requires accurate as well as computationally efficient electronic structure methods for the ground and excited states. While time-dependent density functional theory (TDDFT) is not able to capture static correlation, complete active space self-consistent field methods neglect much of the dynamic correlation. Hence, inexpensive methods that encompass both static and dynamic electron correlation effects are of high interest. Here, we revisit hole–hole Tamm–Dancoff approximated (hh-TDA) density functional theory for this purpose. The hh-TDA method is the hole–hole counterpart to the more established particle–particle TDA (pp-TDA) method, both of which are derived from the particle–particle random phase approximation (pp-RPA). In hh-TDA, the N-electron electronic states are obtained through double annihilations starting from a doubly anionic (N+2 electron) reference state. In this way, hh-TDA treats ground and excited states on equal footing, thus allowing for conical intersections to be correctly described. Furthermore, the treatment of dynamic correlation is introduced through the use of commonly employed density functional approximations to the exchange-correlation potential. Additionally, we show that hh-TDA is a promising candidate to efficiently treat the photochemistry of organic and biochemical systems that involve several low-lying excited states—particularly those with both low-lying ππ* and nπ* states where inclusion of dynamic correlation is essential to describe the relative energetics. In contrast to the existing literature on pp-TDA and pp-RPA, we employ a functional-dependent choice for the response kernel in pp- and hh-TDA, which closely resembles the response kernels occurring in linear response and collinear spin-flip TDDFT.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗