SEARCH · Search NASA

Results for “Lithosphere”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

NASA NTRS1986

Convection beneath young oceanic lithosphere - Implications for thermal structure and gravity

Small-scale convection under the oceanic lithosphere which begins in the first 5 m.y. of cooling can produce a gravity signal with the amplitude and wavelength observed for large areas of the central Pacific and southern Indian oceans using Seasat altimeter data. The trend of the observed anomalies is parallel to the direction of plate motion as might be expected if they were produced by small-scale convection. Models predict that the wavelengths of gravity anomalies increase more rapidly with age than is observed. The persistence of short relatively uniform wavelength anomalies (less than 200 km) to crustal ages of 50 Ma may indicate that they were produced when the lithosphere was very young and thin and were 'frozen in' as cooling thickened the elastic lithosphere. Small-scale convection which begins under very young lithosphere does not violate other geophysical data such as the rate of seafloor subsidence and variations of geoid height with age. After convection has begun, the subsidence due to thermal contraction within the lithosphere varies linearly with age, in the absence of mantle heat sources, although the rate of change of these quantities is affected by convection. Much of the variation of the geoid height across fracture zones can be fit by a model which includes small-scale convection.

Buck, W. R.↗

NASA NTRS1986

Early thermal profiles and lithospheric strength of Ganymede from extensional tectonic features

The early thermal profiles and the lithospheric stability and strength of Ganymede are quantitatively determined on the basis of brittle lithosphere thickness estimates derived from the width and spacing of extensional tectonic features, together with lithospheric strength envelopes for ice. Plots of the brittle and ductile yield stress vs. depth for the icy lithosphere of Ganymede exhibit a linear increase in brittle strength with depth to a maximum at the brittle-ductile transition that is followed by an exponential decrease in ductile yield stress with depth. The results obtained imply that the thermal gradient and lithospheric strength have varied laterally by factor as great as 5, and that Ganymede underwent cooling in a highly inhomogeneous fashion with lateral thermal anomalies. The present analysis furnishes reasons for the stability of large cratered terrain remnants.

Golombek, Matthew P.↗

NASA NTRS1991

Thermoelastic stress in oceanic lithosphere due to hotspot reheating

The effect of hotspot reheating on the intraplate stress field is investigated by modeling the three-dimensional thermal stress field produced by nonuniform temperature changes in an elastic plate. Temperature perturbations are calculated assuming that the lithosphere is heated by a source in the lower part of the thermal lithosphere. A thermal stress model for the elastic lithosphere is calculated by superposing the stress fields resulting from temperature changes in small individual elements. The stress in an elastic plate resulting from a temperature change in each small element is expressed as an infinite series, wherein each term is a source or an image modified from a closed-from half-space solution. The thermal stress solution is applied to midplate swells in oceanic lithosphere with various thermal structures and plate velocities. The results predict a stress field with a maximum deviatoric stress on the order of 100 MPa covering a broad area around the hotspot plume. The predicted principal stress orientations show a complicated geographical pattern, with horizontal extension perpendicular to the hotspot track at shallow depths and compression along the track near the bottom of the elastic lithosphere.

Zhu, Anning↗

NASA NTRS1993

Estimates of lithospheric thickness on Venus

Magellan altimetry data have revealed many examples of topographic flexure on Venus. Modeling of flexural features is of interest as it provides information on spatial (and for the earth, temporal) variations in lithospheric thickness. Lithospheric thickness may be determined solely from modeling topographic flexure or by combining gravity and topography data. On Venus even the highest resolution gravity is insufficient for modeling all but the very longest wavelength flexural features, so we rely heavily on altimetry data for information about lithospheric thickness. Sandwell and Schubert modeled flexure around four coronae and found lithospheric thicknesses h, in the range 35 - 70 km. Studies of several more flexural features suggests that these are typical of Aphrodite Terra and other chasmata regions on Venus. However lithospheric thicknesses associated with other regions are in the range 15-30 km. McKenzie et al. noted that part of Aphrodite Terra appeared similar in planform and morphology to the subduction zones of the East Indies on Earth. Other flexure studies using Magellan data have looked at smaller coronae (h = 5-30 km) and rifts (h = 8-20 km). It can be seen that the range of thicknesses suggested by studies to date is extremely large, and it is difficult to establish whether their mean is in agreement with that predicted by heat flow scaling arguments (h approximately 18 km). Here we present results from a global study of flexure on Venus, with particular emphasis on the variation in our results with different tectonic settings.

Johnson, C. L.↗

NASA NTRS1993

Wrinkle ridges, reverse faulting, and the depth penetration of lithospheric stress in lunae planum, Mars

Tectonic features on a planetary surface are commonly used as constraints on models to determine the state of stress at the time the features formed. Quantitative global stress models applied to understand the formation of the Tharsis province on Mars constrained by observed tectonics have calculated stresses at the surface of a thin elastic shell and have neglected the role of vertical structure in influencing the predicted pattern of surface deformation. Wrinkle ridges in the Lunae Planum region of Mars form a conentric pattern of regularly spaced features in the eastern and southeastern part of Tharsis; they are formed due to compressional stresses related to the response of the Martian lithosphere to the Tharsis bulge. As observed in the exposures of valley walls in areas such as the Kasei Valles, the surface plains unit is underlain by an unconsolidated impact-generated megaregolith that grades with depth into structurally competent lithospheric basement. The ridges have alternatively been hypothesized to reflect deformation restricted to the surface plains unit ('thin skinned deformation') and deformation that includes the surface unit, megaregolith and basement lithosphere ('thick skinned deformation'). We have adopted a finite element approach to quantify the nature of deformation associated with the development of wrinkle ridges in a vertically stratified elastic lithosphere. We used the program TECTON, which contains a slippery node capability that allowed us to explicitly take into account the presence of reverse faults believed to be associated with the ridges. In this study we focused on the strain field in the vicinity of a single ridge when slip occurs along the fault. We considered two initial model geometries. In the first, the reverse fault was assumed to be in the surface plains unit, and in the second the initial fault was located in lithospheric basement, immediately beneath the weak megaregolith. We are interested in the conditions underwhich strain in the surface layer and basement either penetrates or fails to penetrate through the megaregolith. We thus address the conditions required for an initial basement fault to propagate through the megaregolith to the surface, as well as the effect of the megareolith on the strain tensor in the vicinity of a fault that nucleates in the surface plains unit.

Zuber, M. T.↗

NASA NTRS1994

Formation of fold and thrust belts on Venus due to horizontal shortening of a laterally heterogeneous lithosphere

An outstanding question relevant to understanding the tectonics of Venus is the mechanism of formation of fold and thrust belts, such as the mountain belts that surround Lakshmi Planum in western Ishtar Terra. These structures are typically long (hundreds of km) and narrow (many tens of km), and are often located at the margins of relatively high (km-scale) topographic rises. Previous studies have attempted to explain fold and thrust belts in various areas of Venus in the context of viscous and brittle wedge theory. However, while wedge theory can explain the change in elevation from the rise to the adjacent lowland, it fails to account for a fundamental aspect of the deformation, i.e., the topographic high at the edge of the rise. In this study we quantitatively explore the hypothesis that fold and thrust belt morphology on Venus can alternatively be explained by horizontal shortening of a lithosphere that is laterally heterogeneous, due either to a change in thickness of the lithosphere or the crust. Lateral heterogeneities in lithosphere structure may arise in response to thermal thinning or extensive faulting, while variations in crustal thickness may arise due to either spatially variable melting of mantle material or by horizontal shortening of the crust. In a variable thickness lithosphere or crust that is horizontally shortened, deformation will tend to localize in the vicinity of thickness heterogeneity, resulting in a higher component of dynamic topography there as compared to elsewhere in the shortening lithosphere. This mechanism may thus provide a simple explanation for the topographic high at the edge of the rise.

Zuber, M. T.↗

NASA NTRS1994

Estimating lithospheric properties at Atla Regio, Venus

Magellan spehrical harmonic gravity and topography models are used to estimate lithospheric properties at Alta Regio, Venus, a proposed hotspot with dynamic support from mantle plume(s). Global spherical harmonic and local representations of the gravity field share common properties in the Atla region interms of their spectral behavior over a wavelength band from approximately 2100 to approximately 700 km. The estimated free-air admittance spectrum displays a rather featureless long-wavelength portion followed by a sharp rise at wavelengths shorter than about 1000 km. This sharp rise requires significant flexural support of short-wavelength structures. The Bouguer coherence also displays a sharp drop in this wavelength band, indicating a finite flexural rigidity of the lithosphere. A simple model for lithospheric loading from above and below is introduced (D. W. Forsyth, 1985) with four parameters: f, the ratio of bottom loading to top loading; z(sub m), crustal thickness; z(sub l) depth to bottom loading source; and T(sub e) elastic lithosphere thickness. A dual-mode compensation model is introduced in which the shorter wavelengths (lambda approximately less than 1000 km) might be explained best by a predominance of top loading by the large shield volcanoes Maat Mons, Ozza Mons, and Sapas Mons, and the longer wavelengths (lambda approximately greater than 1500 km) might be explained best by a deep depth of compensation, possibly representing bottom loading by a dynamic source. A Monte Carlo inversion technique is introduced to thoroughly search out the four-space of the model parameters and to examine parameter correlation in the solutions. Venus either is a considerabe deficient in heat sources relative to Earth, or the thermal lithosphere is overthickened in response to an earlier episode of significant heat loss from the planet.

Phillips, Roger J.↗

NASA NTRS2017

Heterogeneity of Water Concentrations in the Mantle Lithosphere Beneath Hawaii

The amount and distribution of water in the oceanic mantle lithosphere has implications on its strength and of the role of volatiles during plume/lithosphere interaction. The latter plays a role in the Earth's deep water cycle as water-rich plume lavas could re-enrich an oceanic lithosphere depleted in water at the ridge, and when this heterogeneous lithosphere gets recycled back into the deep mantle. The main host of water in mantle lithologies are nominally anhydrous minerals like olivine, pyroxene and garnet, where hydrogen (H) is incorporated in mineral defects by bonding to structural oxygen. Here, we report water concentrations by Fourier transform infrared spectrometry (FTIR) on olivine, clino- and orthopyroxenes (Cpx & Opx) from spinel peridotites from the Pali vent and garnet pyroxenite xenoliths from Aliamanu vent, both part of the rejuvenated volcanism at Oahu (Hawaii). Pyroxenes from the Aliamanu pyroxenites have high water concentrations, similar to the adjacent Salt Lake Crater (SLC) pyroxenites (Cpx ~400-500 ppm H2O, Opx ~200 ppm H2O). This confirms that pyroxenite cumulates form water-rich lithologies within the oceanic lithosphere. In contrast, the Pali peridotites have much lower water concentrations than the SLC ones (<25 ppm vs. 50-96 ppm H2O respectively) despite being relatively fertile with >10% modal Cpx and low spinel Cr# (0.09-0.10). The contrast between the two peridotite suites is also evident in their trace elements and radiogenic isotopes. The Pali Cpx are depleted in light REE, consistent with minimal metasomatism. Those of SLC have enriched light REE patterns and Nd and Hf isotopes consistent with metasomatism by alkaline melts. These observations are consistent with heterogeneous water distribution in the oceanic lithosphere that may be related to metasomatism, as well as relatively dry peridotites cross-cut by narrow (?) water-rich melt reaction zones.

Bizimis, M.↗

NASA NTRS1972

Deformation and instability of underthrusting lithospheric plates

Models of the underthrusting lithosphere are constructed for the calculation of displacement and deflection. First, a mathematical theory is developed that rigorously demonstrates the elastic instability in the decending lithosphere. The theory states that lithospheric thrust beneath island arcs becomes unstable and suffers deflection as the compression increases. Thus, in the neighborhood of the edges where the lithospheric plate plunges into the asthenosphere and mesosphere its shape will be contorted. Next, the lateral displacement is calculated, and it is shown that, before contortion, the plate will thicken and contract at different positions with the variation in thickness following a parabolic profile. Finally, the depth distribution of the intermediate and deep focus earthquakes is explained in terms of plate buckling and contortion.

Liu, H.↗

NASA NTRS1976

Shield volcanism and lithospheric structure beneath the Tharsis plateau, Mars

The heights of four great shield volcanoes, when interpreted as reflecting the local hydrostatic head on a common source of upwelling magma, provide significant constraints on models of lithospheric structure beneath the Tharsis plateau. If Bouguer gravity anomalies are modeled in terms of a variable thickness crust, and a two-component (crust/mantle) earth-like structure is assumed for the Martian lithosphere, the derived model lithosphere beneath the Tharsis plateau has the following properties: (1) the upper low-density 'crustal' component is thickened beneath the Tharsis plateau; (2) the lower high-density 'mantle' component is thinned beneath the Tharsis plateau; and (3) there is a net gradient on the base of the Martian lithosphere directed downward away from beneath the summit of the Tharsis plateau. A long history of magmatic intrusion is hypothesized to have been the cause of the updoming of the Tharsis plateau and the maintenance of the plateau in a state of only partial compensation.

Blasius, K. R.↗

NASA NTRS1981

Postseismic rebound due to creep of the lower lithosphere and asthenosphere

Postseismic surface deformations are attributed to the inelastic flow of the subcrustal regions of the Earth following an earthquake. A multilayer representation of the Earth's rheological properties is used in conjunction with a finite element computational scheme to calculate time dependent displacements and strains subsequent to a strike slip earthquake. The deviatoric stress strain relations for the uppermost layer is assumed elastic. Lower layers are assumed to be, in order of increasing depth, a standard, linear, three element, viscoelastic solid; a linear viscoelastic fluid; and another elastic solid. Physically these layers correspond to the upper lithosphere, lower lithosphere, asthenosphere, and lower mantle, respectively. Elastic dilatational properties are assumed throughout. Appreciable postseismic displacements, possibly approaching meters, for large earthquakes, arise from viscoelastic relaxation following sudden coseismic slip. Furthermore, compared to the simpler case of an elastic lithosphere over a viscoelastic asthenosphere and the near fault postseismic shear, strain is increased, by a factor of two or more in some cases, by the presence of a viscoelastic lower lithosphere. Also, the duration of postseismic straining is increased by the relatively slow relaxation of this layer.

Cohen, S. C.↗

NASA NTRS1980

Evolution of planetary lithospheres - Evidence from multiringed structures on Ganymede and Callisto

The thickness and viscosity of a planetary lithosphere increase with time as the mantle cools, with a thicker lithosphere leading to the formation of one (or very few) irregular normal faults concentric to the crater. Since a gravity wave or tsunami induced by impact into a liquid mantle would result in both radial and concentric extension features, which are not observed in the case of the large impact structures on Ganymede and Callisto, an alternative mechanism is proposed in which the varying ice/silicate ratios, tectonic histories, and erosional mechanisms of the two bodies are considered to explain the subtle differences in thin lithosphere ring morphology between Ganymede and Callisto. It is concluded that the present lithosphere thickness of Ganymede is too great to permit the development of any rings.

Mckinnon, W. B.↗

NASA NTRS1983

Study of the time evolution of the lithosphere

The behavior and mechanical properties of the lithosphere were studied. This is a prerequisite to an understanding of the mechanisms and processes that occur in the Earth's mantle, which are masked by the lithospere. Geoid heights derived from the GEOS-3 and SEASAT radar altimeters were used. The correlation between bathymetry and geoid heights gives information on the mechanical properties of the lithosphere, such as its thickness, which is related to the age of the lithospheric plate. By probing in several locations spanning various temporal situations, the time evolution of the lithospheric plates were retraced.

Roufosse, M. C.↗

NASA NTRS1985

Venus Chasmata: A Lithospheric Stretching Model

An outstanding problem for Venus is the characterization of its style of global tectonics, an issue intimately related to the dominant mechanism of lithospheric heat loss. Among the most spectacular and extensive of the major tectonic features on Venus are the chasmata, deep linear valleys generally interpreted to be the products of lithospheric extension and rifting. Systems of chasmata and related features can be traced along several tectonic zones up to 20,000 km in linear extent. A lithospheric stretching model was developed to explain the topographic characteristics of Venus chasmata and to constrain the physical properties of the Venus crust and lithosphere.

Solomon, S. C.↗

NASA NTRS1985

Elysium Region, Mars: Tests of Lithospheric Loading Models for the Formation of Tectonic Features

In an effort to constrain the tectonic history and mechanical properties of the lithosphere in the Elysium province, the stress fields predicted by different models are compared to the observed tectonic features of the region. The models are all products of volcanic loading of the Martian lithosphere, but at three different scales: global (Tharsis), regional (Elysium Planitia), and local (individual shields). Conclusions: The concentric graben surrounding Elysium Mons can be ascribed to the flexural response of an approximately 50-km-thick elastic lithosphere to loading by the volcano. No tectonic evidence for the support of larger-scale Elysium Planitia volcanic units by lithospheric flexure. The quasi-global loading of the Tharsis rise appears to have produced identifiable tectonic effects in the Elysium region.

Hall, J. L.↗

NASA NTRS1984

Source mechanisms of earthquakes near mid-ocean ridges from body waveform inversion - Implications for the early evolution of oceanic lithosphere

An evaluation is presented of the tectonics of the near-ridge environment based on the source mechanisms of earthquakes in young oceanic lithosphere. A catalog of near-ridge earthquakes is presented, and source parameters are determined from body waveform inversions. Source parameter-age relations are examined, and the near-ridge seismicity of the Indian Ocean is discussed. Deep normal faulting in young oceanic lithosphere is addressed, as is the relationship between thermoelastic stress and near-ridge earthquakes. The possibility of secondary convection beneath young oceanic lithosphere is considered. Finally, the broader tectonic implications of these results for the evolution of young oceanic lithosphere are discussed.

Bergman, E. A.↗

NASA NTRS1985

Mars - Thickness of the lithosphere from the tectonic response to volcanic loads

The response to loading of the elastic lithosphere of Mars by seven large volcanic features is estimated based on the hypothesis of a flexural origin for a definable set of load-concentric graben. From the locations of such graben, or from their absence, the lithospheric thickness and flexural rigidity are inferred. For the Tharsis montes, Alba Patera, and Elysium Mons, elastic lithospheric thicknesses at the time of loading range from 20 to 50 km, assuming a Young's modulus of a trillion dyn/sq cm. The thickness exceeded 120 km beneath Olympus Mons and Isidis Planitia. The corresponding ranges in flexural rigidity are approximately 10 to the 30th to 31st dyn cm and greater than 10 to the 32nd dyn cm, respectively. These results indicate a local thinning of the lithosphere beneath portions of the central regions of the Tharsis and Elysium volcanic provinces at the time of loading-induced fracturing.

Comer, R. P.↗

NASA NTRS1986

A dynamical model of lithosphere extension and sedimentary basin formation

The effect of convection-induced stresses at the base of the continental lithosphere on surface and extensional deviatoric stresses is investigated. The biaxial strain in the continental lithosphere is controlled by power law creep in the upper and lower crust, brittle failure, and the Dorn plasticity law. The relationship between the lithosphere stress distribution and Moho temperatures is examined. The extension factors, basin subsidence, heat flow, and sediment loading of the lithosphere are studied.

Houseman, G.↗