Search NASA⌕ Search

SEARCH · Search NASA

Results for “Lodgepole”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

31 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

AmeriFlux US-CPF Cameron Peak

This is the AmeriFlux version of the carbon flux data for the site US-CPF Cameron Peak. Site Description - This site was established in 2021 in the wake of the Cameron Peak fire, the largest wildfire in Colorado to date. The site is situated at 3,100m elevation on a ~0.5km^2 flat ridgetop within the burn zone between Sawmill Creek and Chambers Lake. The site, populated by lodgepole pine, subalpine fir and Engelmann spruce, burned heavily in fall 2020. The tower consists of one level of construction scaffolding with instruments mounted at 4.3m height.

Frank, John [US Forest Service, Rocky Mountain Res↗
DOE OSTI2020

Mechanistic and predictive understanding of needle litter decay in semi-arid mountain ecosystems experiencing unprecedented vegetation mortality. Final report

This research compared needle litter decay rates and underlying mechanisms between litter released from insect-killed trees to that of naturally senesced litter from healthy trees across climate variables with elevation and snowmelt rates as variables. Our research was designed to address questions of whether there is a significant impact to C and N cycling at the terrestrial-atmospheric interface in association with pine needle decomposition and the role of changes in soil moisture and temperature as a function of these processes. Field activities were primarily conducted within the Rocky Mountain Biological Laboratory’s (RMBL) East River watershed across a spectrum of ecoregions that spanned approximately 700 vertical meters. Forested catchments at these elevations in southwestern Colorado are threatened by heat-induced drought, altered snowmelt patterns, and invasive insect infestation that have all been associated with climate change. Needle litter from two members of the Pinaceae family experiencing large-scale insect infestations (spruce and lodgepole pine) were collected, redeployed and then sampled over the course of three years. We experimentally tested three tractable parameters that are known to impact litter decay and biogeochemical cycling and are relevant to bark beetle-induced tree mortality: (1) moisture content, (2) temperature by using elevation as a surrogate, and (3) changes to litter compositional chemistry that result from beetle infestation. We examined decay processes and monitored the migration of soluble and gaseous nitrogen and carbon species as well as microbiological signatures of decay such as biodegradable fractions, metal availability and the temporal succession of associated microorganisms at the terrestrial interface.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1973

Investigation of the detection and monitoring of forest insect infestations in the Sierra Nevada Mountains of California

The author has identified the following significant results. It is possible to detect all major areas of lodgepole pine defoliated by the needle miner within a given target area. Ground checking and helicopter observations have confirmed that accurate designations have been obtained for the following areas: (1) timbered v.s. non-timbered areas, (2) damaged v.s. undamaged timber areas, (3) lakes, (4) dome shadows which resemble lakes, (5) mountain meadows, (6) pasture land, (7) agricultural land, (8) desert, and (9) riparian vegetation.

Hall, R. C.↗
NASA NTRS1974

Inventory of forest and rangeland and detection of forest stress

The author has identified the following significant results. Controlled visual interpretation of one ERTS-1 scene taken at the peak of the growing season has indicated that classification to the ECOCLASS Series level is not entirely satisfactory. For five forest classes, aspen, Douglas-fir, lodgepole pine, ponderosa pine, and Spruce/fir, correct identification ranged from 60 to 70 percent. With the exception of shortgrass and wet shrubby meadow classes in the nonforest categories (81 and 100 percent correct, respectively), correct identification of the nonforest classes is so far unacceptable. The low accuracies are believed due to: (1) edge effects due to ecotones between plant community classes with apparent similar image characteristics; (2) confounding effects of amount of plant crown cover and ground surface material in the scene; and (3) variable land slope degree and aspect as it affects the image signature.

Heller, R. C.↗
NASA NTRS1975

Geology and forestry classification from ERTS-1 digital data

Computer classifications into seven and ten classes of two areas in central Oregon of interest to geology and forestry demonstrate the extraction of information from ERTS-1 data. The area around Newberry Caldera was classified into basalt, rhyolite obsidian, pumice flats, Newberry pumice, ponderosa pine, lodgepole pine, and water classes. The area around Mt. Washington was classified into two basalts, three forest, two clearcut, burn, snow, and water classes. Both also include an unclassified category. Significant details that cannot be extracted from photographic reconstitutions of the data emerge from these classifications, such as moraine locations and paleowind directions. Spectral signatures for the various rocks are comparable to those published elsewhere.

Lawrence, R. D.↗
NASA NTRS1979

Interpreting vegetation reflectance measurements as a function of solar zenith angle

Spectral hemispherical-conical reflectances of a nadir looking sensor were taken throughout the day for a lodgepole pine and two grass canopies. Mathematical simulations of both spectral hemispherical-conical and bi-hemispherical reflectances were performed for two theoretical canopies of contrasting geometric structure. These results and comparisons with literature studies showed a great amount of variability of vegetation canopy reflectances as a function of solar zenith angle. Explanations for this variability are discussed and recommendations for further measurements are proposed.

Kimes, D. S.↗
NASA NTRS1980

Simulation of solar radiation absorption in vegetation canopies

A solar radiation canopy absorption model, including multiple scattering effects, was developed and tested for a lodgepole pine (Pinus contorta) canopy. Reflectance above the canopy, spectral transmittance to the ground layer, and geometric and spectral measurements of canopy elements were made. Relatively large differentials occurred in spectral absorption by canopy layers, especially in the photosynthetically active region, as a function of solar zenith angle. In addition, the proportion of total global irradiance absorbed by individual layers varied greatly as a function of solar zenith angle. However, absorption by the entire canopy system remained relatively constant.

Kimes, D. S.↗
NASA NTRS1980

Vegetation reflectance measurements as a function of solar zenith angle

An understanding of the behavior of vegetation canopy reflectance as a function of solar zenith angle is important to several remote sensing applications. Spectral hemispherical-conical reflectances of a nadir looking sensor were taken throughout the day of a lodgepole pine and two grass canopies. Mathematical simulations of both a spectral hemispherical-conical reflectance factor and a spectral bi-hemispherical reflectance were performed for two theoretical canopies of contrasting geometric structure. These results and results from literature studies showed a great amount of variability of vegetation canopy reflectances as a function of solar zenith angle. Explanations for this variability are discussed and recommendations for future measurements are proposed.

Kimes, D. S.↗
NASA NTRS1981

Thermal IR exitance model of a plant canopy

A thermal IR exitance model of a plant canopy based on a mathematical abstraction of three horizontal layers of vegetation was developed. Canopy geometry within each layer is quantitatively described by the foliage and branch orientation distributions and number density. Given this geometric information for each layer and the driving meteorological variables, a system of energy budget equations was determined and solved for average layer temperatures. These estimated layer temperatures, together with the angular distributions of radiating elements, were used to calculate the emitted thermal IR radiation as a function of view angle above the canopy. The model was applied to a lodgepole pine (Pinus contorta) canopy over a diurnal cycle. Simulated vs measured radiometric average temperatures of the midcanopy layer corresponded with 2 C. Simulation results suggested that canopy geometry can significantly influence the effective radiant temperature recorded at varying sensor view angles.

Kimes, D. S.↗
NASA NTRS1988

Calibration and evaluation of AVIRIS data: Cripple Creek in October 1987

Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) data were obtained over Cripple Creek and Canon City Colorado on October 19, 1987 at local noon. Multiple ground calibration sites were measured within both areas with a field spectrometer and samples were returned to the laboratory for more detailed spectral characterization. The data were used to calibrate the AVIRIS data to ground reflectance. Once calibrated, selected spectra in the image were extracted and examined, and the signal to noise performance was computed. Images of band depth selected to be diagnostic of the presence of certain minerals and vegetation were computed. The AVIRIS data were extremely noisy, but images showing the presence of goethite, kaolinite and lodgepole pine trees agree with ground checks of the area.

Clark, Roger N.↗
NASA NTRS1991

Response of vegetation indices to changes in three measures of leaf water stress

The responses of vegetation indices to changes in water stress were evaluated in two separate laboratory experiments. In one experiment the normalized difference vegetation index (NDVI), the near-IR to red ratio (near-IR/red), the Infrared Index (II), and the Moisture Stress Index (MSI) were more highly correlated to leaf water potential in lodgepole pine branches than were the Leaf Water Content Index (LWCI), the mid-IR ratio (Mid-IR), or any of the single Thematic Mapper (TM) bands. In the other experiment, these six indices and the TM Tasseled Cap brightness, greenness, and wetness indices responded to changes in leaf relative water content (RWC) differently than they responded to changes in leaf water content (WC) of three plant species, and the responses were dependent on how experimental replicates were pooled. With no pooling, the LWCI was the most highly correlated index to both RWC and WC among replications, followed by the II, MSI, and wetness. Only the LWCI was highly correlated to RWC and WC when replications were pooled within species. With among species pooling the LWCI was the only index highly correlated with RWC, while the II, MSI, Mid-IR, and wetness were most highly correlated with WC.

Cohen, Warren B.↗
NASA NTRS1996

Surveying Dead Trees and CO2-Induced Stressed Trees Using AVIRIS in the Long Valley Caldera

Since 1980 the Long Valley Caldera in the eastern Sierra Nevada (California) has shown signs of renewed volcanic activity. Frequent earthquakes, a re-inflation of the caldera, hydrothermal activity and gas emissions are the outer symptoms of this renewed activity. In 1990 and 1991 several areas of dying trees were found around Mammoth Mountain. The cause of the die off of the trees was first sought in the persistent drought in the preceding years. However, the trees died regardless of age and species. Farrar et al. (1995) started a soil-gas survey in 1994 in the dead-tree areas and found carbon dioxide concentrations ranging from 30 to 96% at soil depths between 30 and 60 cm. CO2 concentrations in the atmosphere are usually around 0.03% and in the soil profile CO2 levels do commonly not exceed 4 to 5%. Although not much is known about the effect of high levels of carbon dioxide in the soil profile on roots, it is most likely that the trees are dying due to oxygen deprivation: the CO2 drives the oxygen out of the soil. So far, four sites of dead trees have been mapped around Mammoth Mountain. The two largest dying trees sites are located near Horseshoe Lake and near Mammoth Mountain Main Lodge covering approximately an area of 10 and 8 ha respectively. Analysis of the gas composition regarding the He-3/He-4 ratio and the percentage biogenic carbon reveals the source of the gas: the magma body beneath the Long Valley Caldera. Until recently it was not known that volcanoes release abundant carbon dioxide from their flanks as diffuse soil emanations. As a result of the magma gas emission around Mammoth Mountain there is an excellent sequence of dead trees, stressed trees, healthy trees and bare soil surfaces. This research site provides excellent opportunities to: (1) Study the capabilities of imaging spectrometry to map stressed (and dead) pine and fir species; (2) Study methods to separate the vivid vegetation, stressed vegetation and dead vegetation from the soil background of glacial deposits and crystalline rocks. The dead tree areas are located on the flanks of Mammoth Mountain (N:37 deg 37' 45" and W:119 deg 02' 05") at an elevation between 2600 and 3000 meters. The area is covered by an open type of Montane Forest. The dominant tree species are Lodgepole Pine (Pinus contorta), the Red Fir (Abies magnifica) and the Jeffrey Pine (Pinus jeffreyi). The soil surface near Horseshoe Lake is generally fairly bright. The surface is covered by glacial deposits (till) consisting mainly of weathered granitic rocks.

deJong, Steven M.↗
DOE OSTI2024

Data Acquisition System Selection and Calibration of Resistive Moisture Content Measurements for Large-Scale Field Studies in Cold Climate Residential Building Envelope Performance

The residential building stock built before the energy codes were enforced has several significant inefficiency problems in terms of insulation and air leakage. To decrease these inefficiencies, building retrofits are necessary. However, if the envelope is not appropriately designed, excessive accumulation of moisture content and thus mold formation and decay inside the envelope layers can be a vital problem. This risk becomes higher, especially in extreme climate conditions such as cold winters and hot and humid summers as in some northern regions of the U.S. Field studies are essential to test the long-term hygrothermal performance of building envelopes. Although in-situ temperature, RH, and heat flux measurements are straightforward, moisture content measurements are cumbersome. Mainly, because of the heterogeneous nature of the wood materials, deviations and nonuniformities within the materials are unavoidable. Resistance measurements are one of the oldest methods used to measure the moisture content of wood and other building materials. In large-scale studies, it is commonly preferred to use multi-purpose data acquisition systems (DAQ) and custom-made or prefabricated moisture pins to measure the electrical resistance (and thus moisture content) of critical building materials. These multi-purpose DAQ systems generally provide lower costs and offer more flexibility. However, these systems require calibration and fine-tuning to achieve accurate moisture content measurements. A large-scale, two-year-long field study was conducted in northern Minnesota to monitor the hygrothermal performance of residential retrofit wall systems in cold climates. Two base case walls and sixteen different wall treatments were tested. Moisture contents were measured at various layers in each wall treatment using 85 sets of moisture pins. This paper focuses on the overall approach, fabrication, and calibration methodology for the combination of custom-made moisture pins and a multi-purpose DAQ. The aim is to directly use the low-excitation multi-purpose DAQ without any extra voltage regulator. A half-bridge circuit is used to measure wood resistance with 4V excitation voltage and 100 kΩ and 500 kΩ reference resistors. The system is calibrated for four different materials: Douglas fir, lodgepole pine, western red cedar, and oriented strand board (OSB). Calibration experiments were done under controlled conditions in 50% and 65% RH test chambers. Resistance-based moisture content calibration curves are obtained for each species. Results show that higher reference resistors provided better calibration curves for lower excitation voltages.

Desjarlais, Andre Omer↗