Search NASA⌕ Search

SEARCH · Search NASA

Results for “Long Time Integration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Luminosity calibration of low redshift quasars

European (SERC) were combined with U.S. shifts on the IUE in order to obtain the long integration times required to record spectra of faint quasars. LWR spectra of the nearby giant radio galaxy Centarus A(NGC 5548) was attempted in an effort to determine the chemical composition and stellar populations in this unusual galaxy. The IUE results from the low redshift quasar study, combined with the data from an extensive ground based survey, are described.

Wampler, E. J.↗
NASA NTRS1986

Far-ultraviolet background observations at high galactic latitude. II - Diffuse emission

A single spectrum, of extremely long integration time, is used to place stringent new limits on the diffuse far-UV background in the 500-1200 A region. This spectrum, obtained in the vicinity of the North Galactic Pole with the Voyager 2 UV spectrometer, can be explained solely on the basis of resonant scattering from interplanetary H I and He I. Limits on any additional sources of sky background radiation corresponding to 100-200 photons/sq cm per sec/sr per A for continuum emission and 6000 photons/sq cm per sec/sr for line emission are demonstrated. Comparisons of these upper limits with existing measurements and various potential source mechanisms are discussed. The first detection of resonantly scattered interplanetary H I Ly-gamma (973 A) emission is reported.

Holberg, J. B.↗
NASA NTRS1990

New laser materials for laser diode pumping

The potential advantages of laser diode pumped solid state lasers are many with high overall efficiency being the most important. In order to realize these advantages, the solid state laser material needs to be optimized for diode laser pumping and for the particular application. In the case of the Nd laser, materials with a longer upper level radiative lifetime are desirable. This is because the laser diode is fundamentally a cw source, and to obtain high energy storage, a long integration time is necessary. Fluoride crystals are investigated as host materials for the Nd laser and also for IR laser transitions in other rare earths, such as the 2 micron Ho laser and the 3 micron Er laser. The approach is to investigate both known crystals, such as BaY2F8, as well as new crystals such as NaYF8. Emphasis is on the growth and spectroscopy of BaY2F8. These two efforts are parallel efforts. The growth effort is aimed at establishing conditions for obtaining large, high quality boules for laser samples. This requires numerous experimental growth runs; however, from these runs, samples suitable for spectroscopy become available.

Jenssen, H. P.↗
NASA NTRS1991

The effects of rotation on initially anisotropic homogeneous flows

Rotation of initially anisotropic homogeneous flows is studied using a model spectral tensor. It is shown that the anisotropy changes because of the influence of rotation through phase scrambling. Phase scrambling causes the Reynolds stresses to develop with damped oscillations. The final Reynolds stress anisotropy is found to be proportional to the initial structural tensor anisotropy. Closure models for the rapid pressure strain terms should reflect this change in anisotropy, and should drive the anisotropy to reach its final predicted state. Finally, it is shown that long-time integration using direct numerical simulations should be treated with care because phase scrambling effects on a discrete wave space can cause loss of resolution when time becomes large.

Mansour, Nagi N.↗
NASA NTRS1993

Ultraviolet properties of individual hot stars in globular cluster cores. I - NGC 1904 (M79)

As part of an observing program using the IUE satellite to investigate the properties of stars within the cores of Galactic globular clusters, we have obtained three spectra of the cluster NGC 1904 (M79). All three were long-integration-time, short-wavelength (SWP) spectra obtained at the so-called 'center-of-light', and all three showed evidence of multiple sources within the IUE large aperture. We describe the analysis of these spectra and present evidence that the UV sources represent individual hot stars in the post-horizontal-branch stage of evolution. We see more UV-bright objects in the core of this cluster than expected from surveys of similar objects discovered in the outer regions of other globulars, leading us to conclude that dynamical effects in the core may significantly alter the path of evolution off the horizontal branch. The spectra also appear to be fitted more closely by models using Population I metal abundances than by Population II abundance models.

Altner, B.↗
NASA NTRS1997

On spurious behavior of CFD simulations

Spurious behavior in underresolved grids and/or semi-implicit temporal discretizations for four computational fluid dynamics (CFD) simulations are studied. The numerical simulations consist of (a) a 1-D chemically relaxed nonequilibrium model, (b) the direct numerical simulation (DNS) of 2-D incompressible flow over a backward facing step, (c) a loosely-coupled approach for a 2-D fluid-structure interaction, and (d) a 3-D compressible unsteady flow simulation of vortex breakdown in delta wings. Using knowledge from dynamical systems theory, various types of spurious behaviors that are numerical artifacts were systematically identified. These studies revealed the various possible dangers of misinterpreting numerical simulation of realistic complex flows that are constrained by the available computing power. In large scale computations underresolved grids, semi-implicit procedures, loosely-coupled implicit procedures, and insufficiently long time integration in DNS are most often unavoidable. Consequently, care must be taken in both computation and in interpretation of the numerical data. The results presented confirm the important role that dynamical systems theory can play in the understanding of the nonlinear behavior of numerical algorithms and in aiding the identification of the sources of numerical uncertainties in CFD.

Numerical Solution↗
NASA NTRS1976

Environmental Effects on Graphite-Epoxy Fatigue Properties

Effects of torsional and flexural fatigue on the long-time Integrity of advanced graphite-epoxy structural composites have been investigated. Torsional fatigue tests were run at stress ratios of R = 0 (zero to maximum, repeated) and R = -1 (zero mean stress) on unidirectional, angleply, and woven graphite fiber materials in air and water at room temperature and at 74 C. Flexural fatigue tests (four-point bending) with R = -1 were run in air and water at room temperature, and with R = 0 in air. Results show that, in torsional cycling, both water environment and higher test temperature contribute to significant degradation of torsional stiffness. The degradation of stiffness from torsional stress cycling was observed to be much greater with R = -1 than with simple R = 0 cycling. The effect of environment also is greater in the fully reversed cycling. Flexural fatigue results on +/- 30 deg material show a large fatigue effect, with fatigue limits of less than 50% and 30% of the static failure strength for specimens tested under stress ratios of R = 0 and R = -1, respectively. Compliance measurements indicate that the final failures are preceded by damage initiation and accumulation, which begins at about 1% of the specimen life.

Sumsion, H. T.↗
NASA NTRS2002

Entropy Splitting for High Order Numerical Simulation of Compressible Turbulence

A stable high-order numerical scheme for direct numerical simulation (DNS) of shock-free compressible turbulence is presented. The method is applicable to general geometries. It contains no upwinding, artificial dissipation, or filtering. Instead the method relies on the stabilizing mechanisms of an appropriate conditioning of the governing equations and the use of compatible spatial difference operators for the interior points (interior scheme) as well as the boundary points (boundary scheme). An entropy-splitting approach splits the inviscid flux derivatives into conservative and nonconservative portions. The spatial difference operators satisfy a summation-by-parts condition, leading to a stable scheme (combined interior and boundary schemes) for the initial boundary value problem using a generalized energy estimate. A Laplacian formulation of the viscous and heat conduction terms on the right hand side of the Navier–Stokes equations is used to ensure that any tendency to odd–even decoupling associated with central schemes can be countered by the fluid viscosity. The resulting methods are able to minimize the spurious high-frequency oscillations associated with pure central schemes, especially for long time integration applications such as DNS. For validation purposes, the methods are tested in a DNS of compressible turbulent plane channel flow at low values of friction Mach number, where reference turbulence data bases exist. It is demonstrated that the methods are robust in terms of grid resolution, and in good agreement with published channel data. Accurate turbulence statistics can be obtained with moderate grid sizes. Stability limits on the range of the splitting parameter are determined from numerical tests.

N.D. Sandham↗
NASA NTRS2004

Magnetosphere-Ionosphere Coupling and Associated Ring Current Energization Processes

Adiabatic processes in the ring current are examined. In particular, an analysis of the factors that parameterize the net adiabatic energy gain in the inner magnetosphere during magnetic storms is presented. A single storm was considered, that of April 17, 2002. Three simulations were conducted with similar boundary conditions but with different electric field descriptions. It is concluded that the best parameter for quantifying the net adiabatic energy gain in the inner magnetosphere during storms is the instantaneous value of the product of the maximum westward electric field at the outer simulation boundary with the nightside plasma sheet density. However, all of the instantaneous magnetospheric quantities considered in this study produced large correlation coefficients. Therefore, they all could be considered useful predictors of the net adiabatic energy gain of the ring current. Long integration times over the parameters lessen the significance of the correlation. Finally, some significant differences exist in the correlation coefficients depending on the electric field description.

Liemohn, M. W.↗
NASA NTRS2004

High-Order Simulation of Non-Linear Oscillations and Shocks in the Solar Atmosphere

The solar atmosphere presents a rich source of highly non-linear magneto-hydrodynamic phenomena: strong gradients and forcing terms result in both large shocks and oscillations. The additional requirements of energy balance and initialization in hydrostatic equilibrium compound the challenge of this problem. A wealth of observational data allows us to check the results of our simulations. The problem of simulating the solar atmosphere provides, in addition to an interesting system in its own right, a challenging testbed for high-order shock-capturing methods. We discuss the challenge of simulating solar atmospheric phenomena, concentrating on various high-order central methods ranging from second to fourth order. Our method is based on the central-upwind scheme of Kurganov, Noelle and Petrova, which we extend to high order via various interpolants. We investigate various initial data for our simulations, corresponding to observed conditions in different regions of the solar surface: the normal quiet sun and sunspots. When non-oscillatory using second- and third-order methods, we are able to reproduce non-trivial observational results. In particular we find a correlation between initial data and both the shock speeds and particle oscillation spectra that match observations in the corresponding regions. When using fourth-order WENO interpolants, we find that while the individual shock profiles at any given time appear non-oscillatory, spurious oscillations appear in the fields after long time integrations. The issue of initialization in hydrostatic equilibrium raises difficult issues. Careful treatment of the gravitational source term can reduce violations of hydrostatic equilibrium, but difficulties remain, primarily due to discontinuities in the piecewise-polynomial reconstructions. In the case of the Euler equations in gravity, the use of high-order methods reduces the violation of hydrostatic equilibrium to a sufficiently low level for the above described results to be obtained. Including various energy flux terms in the equations, however, leads to severe instability when hydrostatic balance is violated. We discuss various strategies to address this problem, including adaptive grid methods.

Bryson, S.↗
NASA NTRS2005

Active Raman sounding of the earth's water vapor field

The typically weak cross-sections characteristic of Raman processes has historically limited their use in atmospheric remote sensing to nighttime application. However, with advances in instrumentation and techniques, it is now possible to apply Raman lidar to the monitoring of atmospheric water vapor, aerosols and clouds throughout the diurnal cycle. Upper tropospheric and lower stratospheric measurements of water vapor using Raman lidar are also possible but are limited to nighttime and require long integration times. However, boundary layer studies of water vapor variability can now be performed with high temporal and spatial resolution. This paper will review the current state-of-the-art of Raman lidar for high-resolution measurements of the atmospheric water vapor, aerosol and cloud fields. In particular, we describe the use of Raman lidar for mapping the vertical distribution and variability of atmospheric water vapor, aerosols and clouds throughout the evolution of dynamic meteorological events. The ability of Raman lidar to detect and characterize water in the region of the tropopause and the importance of high-altitude water vapor for climate-related studies and meteorological satellite performance are discussed.

Earth (Planet)↗
NASA NTRS2016

Simultaneous Boundary-Layer Transition, Tip Vortex, and Blade Deformation Measurements of a Rotor in Hover

This paper describes simultaneous optical measurements of a sub-scale helicopter rotor in the U.S. Army Hover Chamber at NASA Ames Research Center. The measurements included thermal imaging of the rotor blades to detect boundary layer transition; retro-reflective background-oriented schlieren (RBOS) to visualize vortices; and stereo photogrammetry to measure displacements of the rotor blades, to compute spatial coordinates of the vortices from the RBOS data, and to map the thermal imaging data to a three-dimensional surface grid. The test also included an exploratory effort to measure flow near the rotor tip by tomographic particle image velocimetry (tomo PIV)an effort that yielded valuable experience but little data. The thermal imaging was accomplished using an image-derotation method that allowed long integration times without image blur. By mapping the thermal image data to a surface grid it was possible to accurately locate transition in spatial coordinates along the length of the rotor blade.

Rotorcraft↗
NASA NTRS2016

Phase Retrieval Implementation for the WFIRST Coronagraph Development Testbed

The Wide-Field Infrared Survey Telescope (WFIRST) is a 2.4m diameter space telescope NASA program. The payload will include two instruments, including a coronagraph instrument (CGI). The CGI will be the first active, high-contrast stellar coronagraph in space intended for imaging, discovery, and spectral characterization of exoplanets and debris discs. The CGI designs under development use deformable mirrors (DM) to create a point spread function (PSF) with a dark region around the obscured star object. Each DM consists of an array of actuators, and each actuator causes a local displacement to a thin, mirror-coated, glass face sheet. The actuator displacements are designed to create the PSF. Typically, phase retrieval is used to set the DM actuator displacements to their designed pattern, and then the actuators are further modified by an iterative control loop to correct for system non-idealities. To observe an exoplanet near the star object, the contrast in the annular region must be better than 10^8 (10^9 after post processing) relative to the unobstructed image of the star [1,2]. The coronagraph testbed at Jet Propulsion Laboratory is used to test coronagraph design and control algorithms. The optical system (Fig. 1) is maintained in a vacuum tank so that the PSF is stable for long integration times. Phase retrieval is an important tool for the testbed and serves several purposes, in addition to setting initial DM actuator displacements. Other uses include evaluation of systematic wavefront error introduced by system components, and alignment of the DMs and pupil masks. For example, the location of specific DM actuators relative to the Lyot mask can be determined by displacing the actuator, then measuring the location of the phase disturbance in the pupil plane with phase retrieval. In the next section we further describe the optical train of the testbed and the collection of source and pupil images available as inputs for phase retrieval, as well as one phase retrieval algorithm employed. Section 3 shows example phase retrieval results.

Marx, David↗
NASA NTRS2019

Entropy Stable Method for the Euler Equations Revisited: Central Differencing via Entropy Splitting and SBP

The two decades old high order central differencing via entropy splitting and summation-by-parts (SBP) difference boundary closure of Ols- son & Oliger (1994), Gerritsen & Olsson (1996), and Yee et al. (2000) is revisited. The entropy splitting is a form of skew-symmetric splitting of the nonlinear Euler flux derivatives. Central differencing applied to the entropy splitting form of the Euler flux derivatives together with SBP difference operators will, hereafter, be referred to as entropy split schemes. This study is prompted by the recent growing interest in numerical methods for which a discrete entropy conservation law holds, a discrete global entropy conservation can be proved and/or the numerical method possesses a stable entropy in the framework of SBP difference operators and L2-energy norm estimate. The objective of this paper is to recast the entropy split scheme as the re- cent definition of an entropy stable method for central differencing with SBP operators for both periodic and non-periodic boundary conditions for non- linear Euler equations. Standard high order spatial central differencing as well as high order central spatial DRP (dispersion relation preserving) spatial differencing is part of the entropy stable methodology framework. Long time integration of 2D and 3D test cases is included to show the comparison of this efficient entropy stable method with the Tadmor-type of entropy conservative methods. Studies also include the comparison among the three skew-symmetric splittings on their nonlinear stability and accuracy performance without added numerical dissipations for smooth flows. These are, namely, entropy splitting, Ducros et al. splitting and the Kennedy & Grub- ber splitting.

Sjogreen, Bjorn↗
NASA NTRS2019

Entropy Stable Method for the Euler Equations Revisited: Central Differencing via Entropy Splitting and SBP

The two decades old high order central differencing via entropy splitting and summation-by-parts (SBP) difference boundary closure of Olsson & Oliger, Gerritsen & Olsson, and Yee et al. (15, 7, 37) is revisited. The objective of this paper is to prove for the first time that the entropy split scheme is an entropy stable method for central differencing with SBP operators for both periodic and non-periodic boundary conditions for nonlinear Euler equations. Standard high order spatial central differencing as well as high order central spatial DRP (dispersion relation preserving) spatial differencing is part of the entropy stable methodology framework. The proof is to replace the spatial derivatives by summation-by-parts (SBP) difference operators in the entropy split form of the equations using the physical entropy of the Euler equations. The numerical boundary closure follows directly from the SBP operator. No additional numerical boundary procedure is required. In contrast, Tadmor-type entropy conserving schemes (31) using mathematical entropies and more recently in (35], do not naturally come with a numerical boundary closure and a generalized SBP operator has to be developed (18). Long time integration of 2D and 3D test cases is included to show the comparison of this efficient entropy stable method with the Tadmor-type of entropy conservative methods. Studies also include the comparison among the three skew-symmetric splittings on their nonlinear stability and accuracy performance without added numerical dissipations for smooth flows. These are, namely, entropy splitting, Ducros et al. splitting and the Kennedy & Grubber splitting.

Sjogreen, Bjorn↗
NASA NTRS2015

The Impact of Radiation Damage on Photon Counting with an EMCCD for the WFIRST-AFTA Coronagraph

WFIRST-AFTA is a 2.4m class NASA observatory designed to address a wide range of science objectives using two complementary scientific payloads. The Wide Field Instrument (WFI) offers Hubble quality imaging over a 0.28 square degree field of view, and will gather NIR statistical data on exoplanets through gravitational microlensing. The second instrument is a high contrast coronagraph that will carry out the direct imaging and spectroscopic analysis of exoplanets, providing a means to probe the structure and composition of planetary systems. The coronagraph instrument is expected to operate in low photon flux for long integration times, meaning all noise sources must be kept to a minimum. In order to satisfy the low noise requirements, the Electron Multiplication (EM)-CCD has been baselined for both the imaging and spectrograph cameras. The EMCCD was selected in comparison with other candidates because of its low effective electronic read noise at sub-electron values with appropriate multiplication gain setting. The presence of other noise sources, however, such as thermal dark signal and Clock Induced Charge (CIC), need to be characterised and mitigated. In addition, operation within a space environment will subject the device to radiation damage that will degrade the Charge Transfer Efficiency (CTE) of the device throughout the mission lifetime. Here we present our latest results from pre- and post-irradiation testing of the e2v CCD201-20 BI EMCCD sensor, baselined for the WFIRST-AFTA coronagraph instrument. A description of the detector technology is presented, alongside considerations for operation within a space environment. The results from a room temperature irradiation are discussed in context with the nominal operating requirements of AFTA-C and future work which entails a cryogenic irradiation of the CCD201-20 is presented.

Peddada, Pavani↗
NASA NTRS1971

Double phase-lock loop with rapid transient response - A concept

Integration loop, with narrow bandwidth and long response time, integrates phase estimate of sampling loop, resulting in slower but less jittery response to phase step changes. Sampling loop has wide bandwidth and quick response to phase steps of burst sync interval.

Balcewicz, J. F.↗
NASA NTRSDate not supplied

Lunar Science and Mission Systems Integration for Real-Time Long Duration Remote Robot Surface Operations

Conducting lunar science with a robot on the Moon that is commanded in real-time from Earth by distributed workgroups for long durations is a specific activity that has been developed by many projects including NASA’s Volatiles Investigating Polar Exploration Rover (VIPER) mission. VIPER’s nominal mission period for surface operations was set for 100 Earth days (four lunar days). VIPER’s science knowledge acquisition was set to focus on characterizing the distribution of water and volatiles across a range of thermal environments, within a traverse planned to optimize science return across up to 20 km. While VIPER’s status is the subject of discussion, there is research and analysis from the development and simulations phases that are of benefit to the lunar science community and future remote science operations projects. Discussed here are some findings on the process of integrating lunar science with mission system operations.

VIPER↗