Search NASA⌕ Search

SEARCH · Search NASA

Results for “MANEUVERABILITY - FIGHTERS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Development and evaluation of an inverse solution technique for studying helicopter maneuverability and agility

An inverse solution technique for determining the maximum maneuvering performance of a helicopter using smooth, pilotlike control inputs is presented. Also described is a pilot simulation experiment performed to investigate the accuracy of the solution resulting from this technique. The maneuverability and agility capability of the helicopter math model was varied by varying the pitch and roll damping, the maximum pitch and roll rate, and the maximum load-factor capability. Three maneuvers were investigated: a 180-deg turn, a longitudinal pop-up, and a lateral jink. The inverse solution technique yielded accurate predictions of pilot-in-the-loop maneuvering performance for two of the three maneuvers.

Whalley, Matthew S.↗
NASA NTRS1992

The evaluation of partial binocular overlap on car maneuverability: A pilot study

An engineering approach to enlarge the helmet mounted display (HMD) field of view (FOV) and maintain resolution and weight by partially overlapping the binocular FOV has received renewed interest among human factors scientists. It is evident, based on the brief literature review, that any panoramic display with a binocular overlap, less than a minimum amount, annoys the viewer, degrades performance, and elicits undesirable behavior. The major finding is that across the 60 deg conditions, subjects moved their heads a greater distance (by about 5 degs on each side) than in the 180 deg condition, presumably to compensate for the lack of FOV. It is quite clear that the study, based on simple car maneuverability and two subjects, reveals differences in FOV, but nothing significant between binocular overlap levels and configurations. This tentatively indicates that some tradeoffs of binocular vision for a larger overall display FOV are acceptable.

Tsou, Brian H.↗
NASA NTRS1923

Controllability and Maneuverability of Airplanes

This investigation was conducted for the purpose of studying the behavior of the JN4H airplane in free flight under the action of its controls and from this to arrive at satisfactory definitions and coefficients for controllability and maneuverability. The method consisted in recording the angular velocity about the three axes, together with the air speed, control positions, and acceleration. (author)

Norton, F H↗
NASA NTRS2000

Evaluation of Airfoil Dynamic Stall Characteristics for Maneuverability

In severe maneuvers, out of necessity for a military aircraft or inadvertently for a civil aircraft, a helicopter airfoil will stall in a dynamic manner and provide lift beyond what would be calculated based on static airfoil tests. The augmented lift that occurs in dynamic stall is related to a vortex that is shed near the leading edge of the airfoil. However, directly related to the augmented lift that results from the dynamic stall vortex are significant penalties in pitching moment and drag. An understanding of the relationship between the augmented lift in dynamic stall and the associated moment and drag penalties is the purpose of this paper. This relationship is characterized using data obtained in two-dimensional wind tunnel tests and related to the problem of helicopter maneuverability.

Bousman, William G.↗
NASA NTRS2000

Airfoil Dynamic Stall and Rotorcraft Maneuverability

The loading of an airfoil during dynamic stall is examined in terms of the augmented lift and the associated penalties in pitching moment and drag. It is shown that once stall occurs and a leading-edge vortex is shed from the airfoil there is a unique relationship between the augmented lift, the negative pitching moment, and the increase in drag. This relationship, referred to here as the dynamic stall function, shows limited sensitivity to effects such as the airfoil section profile and Mach number, and appears to be independent of such parameters as Reynolds number, reduced frequency, and blade sweep. For single-element airfoils there is little that can be done to improve rotorcraft maneuverability except to provide good static C(l(max)) characteristics and the chord or blade number that is required to provide the necessary rotor thrust. However, multi-element airfoils or airfoils with variable geometry features can provide augmented lift in some cases that exceeds that available from a single-element airfoil. The dynamic stall function is shown to be a useful tool for the evaluation of both measured and calculated dynamic stall characteristics of single element, multi-element, and variable geometry airfoils.

Bousman, William G.↗
NASA NTRS1977

Investigation of normal shock inlets for highly maneuverable aircraft

Concepts are investigated for obtaining both low cowl drag and good inlet performance at high angles of attack. The effect of a canard on inlet performance for a kidney shaped inlet in each of two vertical locations is discussed along with a sharp lip two dimensional inlet on a canardless forebody.

Martin, A. W.↗
NASA NTRS1978

High Angle of Incidence Implications upon Air Intake Design and Location for Supersonic Cruise Aircraft and Highly Maneuverable Transonic Aircraft

Computational results which show the effects of angle of attack on supersonic mixed compression inlet performance at four different locations about a hypothetical forebody were obtained. These results demonstrate the power of the computational method to predict optimum inlet location, orientation, and centerbody control schedule for design and off design performance. The effects of inlet location and a forward canard on the angle-of-attack performance of a normal shock inlet at transonic speeds were studied. The data show that proper integration of inlet location and a forward canard can enhance the angle-of-attack performance of a normal shock inlet. Two lower lip treatments for improving the angle-of-attack performance of rectangular inlets at transonic speeds are discussed.

Presley, L. S.↗
NASA NTRS1979

High angle of incidence implications upon air intake design and location for supersonic cruise aircraft and highly maneuverable transonic aircraft

The effects of angle of attack on supersonic mixed compression inlet performance at four different locations about a hypothetical forebody are given. A computational method to predict optimum inlet location, orientation, and centerbody control schedule for design and off-design performance is described. The effects of inlet location and a forward canard on the angle-of-attack performance of a normal shock inlet at transonic speeds were studied. Proper integration of inlet location and a forward canard can enhance the angle-of-attack performance of a normal shock inlet. Two lower lip treatments for improving the angle-of-attack performance of rectangular inlets at transonic speeds are discussed.

Presley, L. L.↗
NASA NTRS1981

Hinged strakes for enhanced maneuverability at high angles of attack

A controllable-strake concept for alleviating the adverse effects of strake vortex breakdown and asymmetry on the longitudinal and lateral aerodynamics of strake-wing configurations at high angles of attack is presented. The concept aims to control the strake load independently of angle of attack and sideslip by varying the anhedral angle of strakes hinged along the root chord. The strakes may be deflected in a symmetrical or nonsymmetrical mode for a variety of control functions. Results are presented of an exploratory wind-tunnel investigation to evaluate the potential of the hinged-strake concept for enhancing the three-axis controllability in post-stall flight.

Rao, D. M.↗
NASA NTRS1981

Optimization of thrust algorithm calibration for Computing System (TCS) for Thrust the NASA Highly Maneuverable Aircraft Technology (HiMAT) vehicle's propulsion system

A simplified gross thrust computing technique for the HiMAT J85-GE-21 engine using altitude facility data was evaluated. The results over the full engine envelope for both the standard engine mode and the open nozzle engine mode are presented. Results using afterburner casing static pressure taps are compared to those using liner static pressure taps. It is found that the technique is very accurate for both the standard and open nozzle engine modes. The difference in the algorithm accuracy for a calibration based on data from one test condition was small compared to a calibration based on data from all of the test conditions.

Hamer, M. J.↗
NASA NTRS1983

Supersonic aerodynamic characteristics of a tail-control cruciform maneuverable missile with and without wings

The aerodynamic characteristics for a winged and wingless cruciform missile configuration were examined. The configuration had an ogive-cylinder body with a 3.5 caliber forebody; an overall length-to-diameter ratio of 11.667; and had cruciform tails that were trapezoidal in planform. Tests were made both with and without 72.9 degree cruciform delta wings. The investigation was made for Mach numbers from 1.50 to 4.63, roll attitudes of 0 degrees and 45 degrees, angles of attack from -4 degrees to 22 degrees, and tail control deflections from 10 degrees to -40 degrees.

Spearman, M. L.↗
NASA NTRS1982

HiMAT highly maneuverable aircraft technology, flight report

Flight verification of a primary flight control system, designed to control the unstable HiMAT aircraft is presented. The initial flight demonstration of a maneuver autopilot in the level cruise mode and the gathering of a limited amount of airspeed calibration data.

Source record↗
NASA NTRS1984

Concepts, technology, and operations for a quick response, highly maneuverable launch vehicle

Preliminary results from the NASA orbit-on-demand study are used to identify major technology issues for development of a quick response vehicle. Reasonable vehicles are found to require significant advances in propulsion, structures, materials, and flight mechanics technology. Vehicle concepts using normal growth technology predicted for the 1990s are compromised by expendable hardware or by unmanageable size and complexity. Operational analyses of the vertical-launch and horizontal-launch takeoff vehicles show that the latter have more inherent operational utility. The supply of liquid hydrogen propellant at alternate sites is a major issue; however, propane may be a viable option for at least one concept. Propellant for orbital maneuvering significantly increases gross weight for many of the concepts. This increase is greater for horizontal-takeoff systems becasue of their larger orbiters.

Gabris, E. A.↗