Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAOS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Reconstructing the heavy resonance at hadron colliders

We investigate the method for constructing the invariant mass using the M{sub T2}-assisted on-shell (MAOS) approximation to the invisible particle momenta in the cascade decays of a new particle resonance produced at hadron colliders. We note that the MAOS reconstruction can be defined in several different ways, while keeping the efficiency of approximation at a similar level, and one of them provides a unique solution for each event. It is shown that the invariant mass distribution constructed with the MAOS momenta exhibits a peak at the heavy resonance mass, regardless of the chosen MAOS scheme and the detailed mass spectrum of the particles in the cascade. We stress that the MAOS invariant mass can be used as a clean signal of new particle resonance produced at the Large Hadron Collider, as well as a model-independent method to measure the masses of new particles involved in the event.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Two-Column Aerosol Project (TCAP) Field Campaign Report

This study included the deployment of the Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Climate Research Facility’s Mobile Facility (AMF), ARM Mobile Aerosol Observing System (MAOS) and the ARM Aerial Facility (AAF). The study was a collaborative effort involving scientists from DOE national laboratories, NOAA, NASA, and universities. The AAF and MAOS were deployed for two approximately month-long Intensive Operational Periods (IOPs) conducted in June 2012 and February 2013. Seasonal differences in the aerosol chemical and optical properties observed using the AMF, AAF, and MAOS are presented in this report. The total mass loading of aerosol is found to be much greater in the summer than in the winter, with the difference associated with greater amounts of organic aerosol. The mass fraction of organic aerosol is much reduced in the winter, when sulfate is the dominant aerosol type. Surprisingly, very little sea-salt aerosol was observed in the summer. In contrast, much more sea salt aerosol was observed in the winter. The mass loading of black carbon is nearly the same in both seasons. These differences lead to a relative increase in the aerosol light absorption in the winter and an associated decrease in observed single-scattering albedo. Measurements of aerosol mixing state were made using a single-particle mass spectrometer, which showed that the majority of the summertime aerosol consisted of organic compounds mixed with various amounts of sulfate. A number of other findings are also summarized in the report, including: impact of aerosol layers aloft on the column aerosol optical depth; documentation of the aerosol properties at the AMF; differences in the aerosol properties associated with both columns, which are not systematic but reflect the complicated meteorological and chemical processes that impact aerosol as it is advected away from North America; and new instruments and data-processing techniques for measuring both aerosol and cloud properties that were deployed for the first time during the TCAP. Key lessons learned during TCAP include the need for closer coordination between the AMF, MAOS, and the AAF so that all AMF instruments can be online and functioning during the AAF IOPs. Based on experiences from TCAP, it is also important for instrument mentors, or other relevant individuals, to review data on a regular basis to ensure that data quality remains high during the entire deployment. TCAP was marked by two important meteorological events including the passage of Hurricane Sandy at the end of October 2012 and the occurrence of one of the largest New England blizzards in recorded history. During Sandy the AMF received some, generally minor, damage and was largely functional a short time after the storm. The blizzard led to extensive power outages on Cape Cod and a multi-day interruption of measurements by the AMF, MAOS, and AAF. In each case, however, the ARM Facilities were returned to service and functioning as soon as was reasonably possible.

54 ENVIRONMENTAL SCIENCES↗

Activities of the Dopaminergic System and Glutathione Antioxidant System in the Hippocampus of Stressed rats

The effects of chronic restraint stress (CRS, 2 h during 14 days) on gene expression of tyrosine hydroxylase (TH), catechol-O-methyltransferase (COMT), and glutathione peroxidase (GPx) were studied in the rat hippocampus. Changes in the dopamine (DA) concentration and activities of monoamine oxidases (MAO A and MAO B) and GPx in this cerebral structure of chronically stressed rats were also examined. The investigated parameters were quantified using real-time RT-PCR, Western blot analyses, and assay of enzymatic activity. We found that CRS decreased the TH protein level and DA concentration, which probably confirms the statement that de novo synthesis of DA is suppressed under stress conditions. The increased activities of MAO B, as well as the increased level of COMT protein, are believed to be related to intensified DA catabolism conditions. Also, a decreased activity of GPx in the hippocampus of chronically stressed animals was found. The increased enzymatic activity of MAO B negatively correlated with the reduced activity of GPx under the above-mentioned stress conditions. These events in the hippocampus of chronically stressed animals could synergistically cause oxidative damage to the mitochondria. © 2019, Springer Science+Business Media, LLC, part of Springer Nature.

60 APPLIED LIFE SCIENCES↗

Improving Corrosion Resistance and Corrosive Wear Resistance of Aluminum Alloy Drill Pipe by Surface Nanocrystallization and Micro-arc Oxidation

To improve the corrosion and wear resistance performance of aluminum alloy drill pipes in geological and petroleum drilling applications, a strengthening coating was prepared on the surface of the 2618 aluminum alloy by combining treatment with ultrasonic cold forging technology (UCFT) and micro-arc oxidation (MAO). The effects of the strengthening coating on the corrosion and wear resistance of the aluminum alloy were evaluated by electrochemical and tribological tests. The results demonstrated that the corrosion and wear resistance of the aluminum alloy were improved by the UCFT and MAO technologies, especially the salt corrosion resistance. The corrosion morphology of the strengthening coating primarily included pitting, micro-cracks and NaCl attachment. In addition, the UCFT + MAO composite coating exhibited the best wear performance. The wear rate of the UCFT + MAO composite coating was lower than that of the aluminum alloy by 94%. The results provided support for this excellent surface treatment technology for the corrosion and wear resistance of aluminum alloy drill pipes, and they also present a feasible evaluation method for drill pipes.

36 MATERIALS SCIENCE↗

Grid Spacing Sensitivities of Simulated Mid-Latitude and Tropical Mesoscale Convective Systems in the Convective Gray Zone

The main objective of this study is to observationally constrain processes in tropical and midlatitude mesoscale convective systems (MCSs), and to use these constraints for model evaluation. To accomplish this, we leverage MCS observations collected at the U.S. DOE Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) site in Oklahoma and ARM's mobile GoAmazon2014/15 site in Manaus, Brazil (MAO). We simulate 13 and 11 of these observed MCSs at the SGP and MAO site, respectively, using the Weather Research and Forecasting model at 12-, 4-, 2-, and 1-km horizontal grid spacing. Observations from radiosondes, surface meteorology, and radar wind profilers are used to characterize MCS properties, such as MCS timing and location, cold pools, and convective drafts, and evaluate these simulations. SGP cases are found in better agreement with observations than MAO cases, and when simulated at 2 km, outperform simulations at 1 km regarding the timing of MCS overpass and the accuracy of surface variable trends. MAO simulations suggest a consistent improvement in model accuracy with increasing model resolution in depicting the downdraft structure, the timing of MCSs, and the surface variables changes, except for the latter two metrics at 2 km. Deficiencies are still evident at km-scales, suggesting the need for higher resolution to simulate tropical MCSs. Overall, location-dependent improvements in MCS representation are obtained with the increasing model resolution, prompting the evaluation of sub-km scale simulations.

54 ENVIRONMENTAL SCIENCES↗

Epitaxial growth and atomic arrangement in Fe2CrO4 on crystal symmetry matched (001) MgAl2O4

We report on the chemical, structural, and optical properties of molecular beam epitaxy (MBE) synthesized thin films of multifunctional Fe2CrO4 on (001)-oriented MgAl2O4 (MAO). Substrate temperatures near 500 °C are required to obtain smooth films with the expected out-of-plane (OOP) lattice parameter. Mg diffusion from the MAO substrate is kinetically suppressed up to 500 °C. We discuss anti-phase boundaries in symmetry matched epitaxial systems. This research provides new insight into the epitaxial growth and crystalline properties of crystal-symmetry-matched Fe2CrO4/MAO(001) heterostructures.

Scafetta, Mark↗

Characterization and Properties of Micro-arc Composite Ceramic Coatings on Magnesium Alloys

Magnesium alloys are of growing interest for many industrial applications due to their favorable strength-to-weight ratio and excellent cast ability. However, one of the limiting factors in the use of magnesium on production vehicles is its poor corrosion resistance. Micro-arc Composite Ceramic (MCC) coatings on AZ91D magnesium alloys were prepared in combination with Micro-arc Oxidation (MAO) and electrophoresis technologies. The microstructure, corrosion resistance, abrasion resistance, stone impact resistance, thermal shock resistance and adhesion of MCC coating were studied, respectively. The surface and cross-section morphologies of MAO and MCC coating showed that the outer organic coating filled the holes on the surface of the MAO coating. It acted as a shelter on the MAO coating surface when the MCC coatings were exposed to corrosive environments. The corrosion resistance of the MCC coating was characterized by a copper-accelerated acetic acid salt spray test. The testing results showed that the creep back from scribe lines was less than 1mm and completely fit the evaluation standard. The composite structure of the MCC coating vastly improved the corrosion resistance of Mg alloys. According to testing standards, the resistance to abrasion, stone impact resistance, thermal shock resistance and adhesion of MCC coatings completely met the evaluation standard requirements. The MCC coated AZ91D magnesium alloys possessed excellent properties; this is a promising corrosion and wear resistance surface treatment technology on magnesium alloys for production vehicles.

magnesium coatings micro-arc corrosion↗

Micro arc oxidation of aluminum for nuclear applications

Dry cask storage and transport of used (spent) nuclear fuel rely upon the basket and shell of the cask to transfer the decay heat from the fuel assemblies. Cask licensees have considered the use of light metal (aluminum) oxidation to enhance the emissivity of aluminum alloy or aluminum based Metal Matrix Composites (MMC) used in the cask basket. However, traditional anodization techniques suffer from issues that make fabrication and regulatory acceptance problematic. The Micro Arc Oxidation (MAO) technology overcomes the problems associated with traditional anodization in the production of consistent, uniform and reliable high emissivity coatings of aluminum alloys. Samples of AA 2219 and an aluminum-based MMC were treated using a proprietary MAO process and subjected to a number of tests to confirm suitability of the coated material. The treated material was inspected using macro photography and Scanning Electron Microscopy (SEM). A consistent, uniform black, porous surface with a typical surface roughness of Ra = 7-8 μm was observed. Emissivity of treated surfaces with thicknesses ranging from 24 microns to 40 microns was measured using an integrating sphere. In all cases, the emissivity coefficient at room temperature in the ranges of 400 to 700 nanometers and 1000 to 1650 nanometers was above 0.8, reaching 0.94 depending on the thickness. The MAO process yield was tested by coating 400 spent fuel basket components to ensure a minimum specified thickness. 97% of the tested points met or exceeded the minimum thickness required. The defect density was very low and 100% of the components met the quality assurance criteria. In-service surface performance was tested by exposing the treated surface to a number of high temperature environments (air, vacuum, nitrogen) and thermal cycling in air. In all cases, the surface remained unchanged. Test samples were exposed to 90 Celsius degrees borated and demineralized water for 48 hours with no change to the sample treated surface. Finally, tests sample were exposed to 60 C. degrees borated water for 168 hours with no change to the sample treated surface. MAO technology appears to be a viable method to provide consistent, durable, and high emissivity coatings, that can be used in the fabrication and licensing of dry storage/transportation casks.

36 MATERIALS SCIENCE↗

Aerosol observing system platform integration and AAF instrumentation

As part of the federal government’s 2009 American Recovery and Reinvestment Act (ARRA), the U.S. DOE Office of Science allocated funds for the capital upgrade of the Atmospheric Radiation Measurement (ARM) Climate Research Facility to improve and expand observational capabilities related to cloud and aerosol properties. The ARM Facility was established as a national user facility for the global scientific community to conduct a wide range of interdisciplinary science. Part of the ARRA-funded expansion of the ARM Facility includes four new Aerosol Observing Systems (AOS) to be designed, instrumented, and mentored by BNL. The enclosures will be customized SeaTainers. These new platforms ([AMF2]: ARM Mobile Facility-2; [TWP-D]: Tropical Western Pacific at Darwin; and [MAOS-A]/[MAOS-C]: Mobile Aerosol Observing System-Aerosol/-Chemistry) will provide a laboratory environment for fielding instruments to collect data on aerosol life cycle, microphysics, and optical/physical properties. The extensive instrument suite includes both established methods and initial deployments of new techniques to add breadth and depth to the AOS data sets. The platforms are designed: (1) to have all instruments pre-installed before deployment, allowing a higher measurement duty cycle; (2) with a standardized configuration improving the robustness of data inter-comparability; (3) to provide remote access capability for instrument mentors; and (4) to readily accommodate guest instrumentation. The first deployment of the AMF2 platform will be at the upcoming StormVEx campaign held at Steamboat Springs, Colorado, October 15, 2010–March 31, 2011 while the TWP-D AOS will be stationed at the ARM Darwin site. The maiden deployments of the MAOS-A and MAOS-C platforms will be during the Ganges Valley Experiment (GVAX) scheduled for April 2011–April 2012. In addition to the ground-based AOS platforms, thee major instrument builds for the AAF are also being undertaken (new trace gas package [NO, NOx, NOy, CO, O3, and SO2]; Scanning Mobility Particle Sampler [SMPS]; and Particle into Liquid Sampler [PILS]). The current status of the AOS platforms, instrument suites, instituted QA/QC activities, projected AOS VAPs, and inlet design, as well as still-unresolved issues, will be presented.

54 ENVIRONMENTAL SCIENCES↗

Corrosion Performance of Composite MAO/TiO{sub 2} Sol–Gel Coatings on Magnesium Alloy AZ91D

In this paper, the composite coatings on the surface of magnesium alloy were successfully prepared by the combination of micro-arc oxidation (MAO) and sol–gel method. Oxide ceramic layers were formed on AZ91D magnesium alloy using MAO process. The sol–gel layers were coated on MAO ceramic layers. The composition of the composite coatings was analyzed by x-ray diffraction and x-ray photoelectron spectroscopy. The microstructure of the composite coatings was analyzed by scanning electron microscope. The results show that the composite coatings can reduce the gap membrane effectively. The polarization curves and electrochemical impedance spectroscopy were used to evaluate the corrosion resistance. The results of corrosion tests show that the sol–gel layer enhances the corrosion resistance of the magnesium alloys significantly.

36 MATERIALS SCIENCE↗

Biomimetic model-based advanced control strategy integrated with multi-agent optimization for nonlinear chemical processes

Here, a novel framework is proposed for integrating biomimetic-based advanced control and multi-agent optimization approaches for nonlinear chemical process applications. In particular, a Biologically-Inspired Optimal Control Strategy, denoted as BIO-CS, is combined with multi-agent optimization (MAO) techniques to provide optimal solutions for dynamic systems. In this combined framework, the BIO-CS algorithm employs gradient-based optimal control solvers for the intermediate problems associated with the leader-follower agents’ local interactions. Also, the MAO uses the capabilities of heuristic-based optimization techniques by sharing process information to obtain optimal operating setpoints for the controller considering an overall process objective. The applicability of the proposed method is demonstrated using a nonlinear, multivariable, process model of a fermentation system. Specifically, the optimal operating points are computed by the MAO implementation for setpoint tracking, trajectory tracking and plant-model mismatch scenarios for BIO-CS application. Results of the developed framework are compared to a gradient-based Sequential Quadratic Programming (SQP) technique and a classical proportional-integral (PI) controller in terms of optimization and control studies, respectively. As an additional contribution, BIO-CS is also cast as a model predictive controller (MPC) for the first time and compared to the agent-based BIO-CS approach in terms of computational time and tracking error. Closed-loop control results show up to 46% improvement in tracking performance during transient for the multi-agent BIO-CS when compared to BIO-CS as MPC for additional computational expense. The obtained results illustrate the capabilities of this novel integrated framework including BIO-CS as MPC to achieve desired nonlinear system performance for various scenarios.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Constitutive model fingerprints in medium-amplitude oscillatory shear

Rheologists have expectations for signatures of linear viscoelastic properties, such as shapes of G'(ω) and G"(ω). Medium amplitude (or asymptotically-nonlinear) oscillatory shear (MAOS) provides additional nonlinear rheological information with low dimensional, well-defined material functions. Here, we develop expectations of signatures (or fingerprints) for the four asymptotically-nonlinear material functions associated with MAOS, [e 1 ](ω), [e 3 ](ω), [v 1 ](ω), [v 3 ](ω). Although the linear fingerprints may be identical for different models, the asymptotically-nonlinear fingerprints may be different in magnitude, frequency-scaling, curve shapes, and sign changes. To perform the analysis, we collect/translate a library of available analytical strain-controlled MAOS fingerprints for seven different constitutive models. Using this library, we identify general trends and highlight key differences of asymptotic-nonlinear viscoelasticity. Asymptotic nonlinearities for all models considered here obey the terminal regime inter-relations and frequency scaling predicted by Bharadwaj and Ewoldt. Unlike the positive linear viscoelastic measures, at least one of the four asymptotic nonlinearities changes signs with Deborah number (De). Following sign interpretations of Ewoldt and Bharadwaj, we show that nonlinearities tend to be driven by strain-rates at small De, and by strains at large De, a trend observed for nearly all the constitutive models studied here, the exception being the model for dilute rigid dumbbell suspensions. Some constitutive models exhibit multiple sign changes at intermediate De and there may be no universal behavior of asymptotically-nonlinear fingerprints in this regime. Therefore, frequency-dependent signatures can be material-specific. Furthermore, this will allow inverse problems to infer structure, select models, and fit model parameters using asymptotically-nonlinear signatures. To illustrate this aspect, we demonstrate a fingerprint matching exercise with experimental measurements on a transiently cross-linked hydrogel system. We find that currently available model fingerprints can match the qualitative magnitudes and frequency dependence, but not the signs of the experimental transient network response.

42 ENGINEERING↗

The weakly nonlinear response and nonaffine interpretation of the Johnson–Segalman/Gordon–Schowalter model

We derive new analytical solutions for the non-affine Johnson-Segalman/Gordon-Schowalter (JS/GS) constitutive equation with a general relaxation kernel in medium-amplitude oscillatory shear (MAOS) deformation. The results show time-strain separable (TSS) nonlinearity, therefore providing new physically-meaningful interpretation to the heuristic TSS nonlinear parameter in MAOS. The upper-convected, lower-convected, and corotational Maxwell models are all subsets of the results presented here. The model assumes that the microscale elements causing stress in the material slip compared to the continuum deformation. We introduce a visualization of the non-affine deformation field that acts on stress-generating elements to reinforce the hysical interpretation of the JS/GS class of models. Lastly, a case study is presented where previously published results, from fitting TSS models to MAOS data, can be re-interpreted based on the concept of non-affine motion of the JS/GS framework.

36 MATERIALS SCIENCE↗

Study of the Crack Resistance of Microarc Oxidation Coatings after Laser Doping with Zirconium Oxide

In this paper we present the results of a study of crack resistance of a microarc oxidation coating (MAO) after laser doping with zirconium oxide. Crack resistance was determined by indentation with imprint imaging using atomic force microscopy. Laser doping with zirconium oxide was established to lead to a significant hardening of the MAO coating. The stress intensity factor increases by a factor of 2.7 while surface damage decreases by a factor of 2 compared with the initial MAO coating.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

PET Studies of Zelapar

PET Scans on normal human volunteers to monitor the effects of Zelapar, a monoamine oxidase B (MAO B) inhibitor, on MAO A in the human brain. Open-label, crossover study. The basic design is to evaluate 3 different doses of Zelapar in different dose groups of 6 volunteers each. MAO A will be measures with [11C]clorgyline at baseline and after dosing with Zelapar. In 3 of the subjects with the highest dose we will also measure the dopamine transporter availability with [11C]cocaine before and after the Zelapar.

99 GENERAL AND MISCELLANEOUS↗

Single-point parallel disk correction for asymptotically nonlinear oscillatory shear

We derive exact single-point corrections for parallel disk measurements of all four asymptotically nonlinear measures under strain-controlled oscillatory shear. In this regime, sometimes called medium-amplitude oscillatory shear (MAOS), the derivatives appearing in the general stress correction are constant over the range of interest. This enables an exact single-point correction of all four shear stress components and material functions in the asymptotically nonlinear regime. This greatly simplifies the data processing and allows convenient measurements of true nonlinear material functions with parallel disk geometries. We use a strain amplitude expansion for the stress response, introducing a general non-integer strain amplitude scaling for the leading order nonlinearity, σ ~ γ α , where typically α = 3 has been assumed in the past. The stress corrections are a multiplicative amplification by a factor f(α) = α+3/4, shown for the first time for all four asymptotically nonlinear coefficients. Experimental measurements are presented for the four asymptotically nonlinear signals on an entangled polymer melt of cis-1,4-polyisoprene, using both parallel disk and cone fixtures. The polymer melt follows a cubic (α = 3) strain amplitude scaling in the MAOS regime. Furthermore, the theoretical corrections indicate a 50 % amplification of the apparent signals measured with the parallel disk fixture. The corrected (amplified) signals match the measurements with the cone.

42 ENGINEERING↗

Long-term single-column model intercomparison of diurnal cycle of precipitation over midlatitude and tropical land

General Circulation Models (GCMs) have for decades exhibited difficulties in modelling the diurnal cycle of precipitation (DCP). This issue can be related to inappropriate representation of the processes controlling sub-diurnal phenomena like convection. In this study, 11 single-column versions of GCMs are used to investigate the interactions between convection and environmental conditions, processes that control nocturnal convections, and the transition from shallow to deep convection on a diurnal time-scale. Long-term simulations are performed over two continental land sites: the Southern Great Plains (SGP) in the USA for 12 summer months from 2004 to 2015 and the Manacapuru site at the central Amazon (MAO) in Brazil for two full years from 2014 to 2015. The analysis is done on two regimes: afternoon convective regime and nocturnal precipitation regime. Most models produce afternoon precipitation too early, likely due to the missing transition of shallow-to-deep convection in these models. At SGP, the unified convection schemes better simulate the onset time of precipitation. At MAO, models produce the heating peak in a much lower level compared with observation, indicating too shallow convection in the models. For nocturnal precipitation, models that produce most of nocturnal precipitation all allow convection to be triggered above the boundary layer. This indicates the importance of model capability to detect elevated convection for simulating nocturnal precipitation. Sensitivity studies indicate that (a) nudging environmental variables towards observations has a minor impact on DCP, (b) unified treatment of shallow and deep convection and the capability to capture mid-level convection can help models better capture DCP, and (c) the interactions of the atmosphere with other components in the climate system (e.g. land) are also important for DCP simulations in coupled models. Finally, these results provide long-term statistical insights on which physical processes are essential in climate models to simulate DCP.

54 ENVIRONMENTAL SCIENCES↗

Study of Scanning Micro-arc Oxidation and Coating Development

Micro-arc oxidation (MAO) continues to be the focus of numerous investigations, whereas relatively few studies have considered scanning micro-arc oxidation (SMAO). In the present work, an experimental study was performed using stationary and moving electrodes to investigate coating development in SMAO and discern the effect of key process parameters. Examination of oxide deposits made on A356 aluminum show that coating thickness and growth rate are inversely related to inter-electrode spacing and travel speed. An evaluation of SMAO deposits made by stationary and moving nozzles revealed that coating thickness profiles follow a Gaussian distribution due to the electrolyte flow field in the impingement zone. Hardness surveys and scanning electron microscope analysis of SMAO coatings revealed that micro-hardness distributions and cross-sectional morphology are similar to MAO for a stationary nozzle but that a denser outer layer develops when a moving nozzle is used. This is attributed to a high density of discharge occurring in micropores of the oxide film and remelting which results from the moving electrolyte column. Analysis of voltage–current characteristic curves shows that the resistance of the electrolyte column is essentially linear over the range considered and results indicate that it can be modeled as a variable length resistor. While further testing is needed, results confirm that SMAO is suitable for coating large, planar parts and for repairing worn surfaces.

36 MATERIALS SCIENCE↗