Search NASA⌕ Search

SEARCH · Search NASA

Results for “MASS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Oscillating decay rate in electron capture and the neutrino mass difference

Reported oscillations in the rate of decay of certain ions by K-electron capture have raised questions about whether and how such oscillations can arise in quantum-mechanical theory and whether they can measure the neutrino mass difference. Here I show that simple principles of quantum mechanics answer some questions and clarify what must be performed theoretically or experimentally to answer some others. The principal result is that quantum mechanics does allow mass-difference-dependent oscillations in principle, but it imposes conditions not obeyed by the approximate dynamical models that have been put forth up to now. In particular, indirect coupling between two neutrino mass channels must be taken into account. What needs to be done experimentally and theoretically is discussed

Peshkin, Murray↗

Search for Low-Mass Dark Matter with CDMSlite Using a Profile Likelihood Fit

The Cryogenic Dark Matter Search low ionization threshold experiment (CDMSlite) searches for interactions between dark matter particles and germanium nuclei in cryogenic detectors. The experiment has achieved a low energy threshold with improved sensitivity to low-mass (<10 GeV/c2) dark matter particles. We present an analysis of the final CDMSlite data set, taken with a different detector than was used for the two previous CDMSlite data sets. This analysis includes a data "salting" method to protect against bias, improved noise discrimination, background modeling, and the use of profile likelihood methods to search for a dark matter signal in the presence of backgrounds. We achieve an energy threshold of 70 eV and significantly improve the sensitivity for dark matter particles with masses between 2.5 and 10 GeV/c2 compared to previous analyses. We set an upper limit on the dark matter-nucleon scattering cross section in germanium of 5.4×10-42 cm2 at 5 GeV/c2, a factor of ~2.5 improvement over the previous CDMSlite result.

Agnese, R↗

Repainting the colour–mass diagrams by unearthing the green mountain: dust-rich S0 galaxies in the colour–(galaxy stellar mass) diagram, and the colour–(black hole mass) relations for dust-poor versus dust-rich galaxies

ABSTRACT Lenticular galaxies are notoriously misclassified as elliptical galaxies and, as such, a (disc inclination)-dependent correction for dust is often not applied to the magnitudes of dusty lenticular galaxies. This results in overly red galaxy colours, impacting their distribution in the colour–magnitude diagram. It is revealed how this has led to an underpopulation of the ‘green valley’ by hiding a ‘green mountain’ of massive dust-rich lenticular galaxies – known to be built from gas-rich major mergers – within the ‘red sequence’ of colour–(stellar mass) diagrams. Correcting for dust, a ‘green mountain’ appears at M*,gal ∼ 1011 M⊙, along with signs of an extension to lower masses producing a ‘green range’ or ‘green ridge’ on the green side of the ‘red sequence’ and ‘blue cloud.’ The ‘red sequence’ is shown to be comprised of two components: a red plateau defined by elliptical galaxies with a near-constant colour and by lower-mass dust-poor lenticular galaxies, which are mostly a primordial population but may include faded/transformed spiral galaxies. The presence of the quasi-triangular-shaped galaxy evolution sequence, previously called the ‘Triangal’, is revealed in the galaxy colour–(stellar mass) diagram. It tracks the speciation of galaxies and their associated migration through the diagram. The connection of the ‘Triangal’ to previous galaxy morphology sequences (Fork, Trident, and Comb) is also shown herein. Finally, the colour–(black hole mass) diagram is revisited, revealing how the dust correction generates a blue–green sequence for the spiral and dust-rich lenticular galaxies that is offset from a green–red sequence defined by the dust-poor lenticular and elliptical galaxies.

Graham, Alister W. (ORCID:0000000264969414)↗

New Results from the Search for Low-Mass Weakly Interacting Massive Particles with the CDMS low ionization Threshold Experiment

The CDMS low ionization threshold experiment (CDMSlite) uses cryogenic germanium detectors operated at a relatively high bias voltage to amplify the phonon signal in the search for weakly interacting massive particles (WIMPs). Results are presented from the second CDMSlite run with an exposure of 70 kg day, which reached an energy threshold for electron recoils as low as 56 eV. A fiducialization cut reduces backgrounds below those previously reported by CDMSlite.

New Results, Low-Mass, Mazzive Particles, CDMS Low↗

Quality Control Analysis in Real-time (QC-ART): A Tool for Real-time Quality Control Assessment of Mass Spectrometry-based Proteomics Data

Liquid chromatography-mass spectrometry (LC-MS)-based proteomics studies of large sample cohorts can easily require from months to years to complete. Acquiring consistent, high-quality data in such large-scale studies is challenging because of normal variations in instrumentation performance over time, as well as artifacts introduced by the samples themselves, such as those due to collection, storage and processing. Existing quality control methods for proteomics data primarily focus on post-hoc analysis to remove low-quality data that would degrade downstream statistics; they are not designed to evaluate the data in near real-time, which would allow for interventions as soon as deviations in data quality are detected. In addition to flagging analyses that demonstrate outlier behavior, evaluating how the data structure changes over time can aide in understanding typical instrument performance or identify issues such as a degradation in data quality due to the need for instrument cleaning and/or re-calibration. To address this gap for proteomics, we developed Quality Control Analysis in Real-Time (QC-ART), a tool for evaluating data as they are acquired in order to dynamically flag potential issues with instrument performance or sample quality. QC-ART has similar accuracy as standard post-hoc analysis methods with the additional benefit of real-time analysis. We demonstrate the utility and performance of QC-ART in identifying deviations in data quality due to both instrument and sample issues in near real-time for LC-MS-based plasma proteomics analyses of a sample subset of The Environmental Determinants of Diabetes in the Young cohort. We also present a case where QC-ART facilitated the identification of oxidative modifications, which are often underappreciated in proteomic experiments.

Stanfill, Bryan A.↗

Evaluations for medium- and high-mass nuclei for FUSION applications

There is a renewed attention to nuclear fusion as a commercial source of carbon-free energy, however there are many scientific needs that must be addressed to enable the future success of fusion as an economical energy option. Among these is the proper description of the impact of radiation produced in the fusion vessel chamber and all other components of the reactor. In this work we will focus on the nuclear data needs to describe the interaction between primary and secondary neutron radiation and the medium- and high-mass nuclei commonly present in structural (such as stainless steel) and superconducting (e.g., electromagnets) materials.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

THE EATING HABITS OF MILKY WAY-MASS HALOS: DESTROYED DWARF SATELLITES AND THE METALLICITY DISTRIBUTION OF ACCRETED STARS

We study the mass spectrum of destroyed dwarfs that contribute to the accreted stellar mass of Milky Way (MW)-mass (M{sub vir} ∼ 10{sup 12.1} M{sub ⊙}) halos using a suite of 45 zoom-in dissipationless simulations. Empirical models are employed to relate (peak) subhalo mass to dwarf stellar mass, and we use constraints from z = 0 observations and hydrodynamical simulations to estimate the metallicity distribution of the accreted stellar material. The dominant contributors to the accreted stellar mass are relatively massive dwarfs with M{sub star} ∼ 10{sup 8}–10{sup 10}M{sub ⊙}. Halos with more quiescent accretion histories tend to have lower mass progenitors (10{sup 8}–10{sup 9} M{sub ⊙}), and lower overall accreted stellar masses. Ultra-faint mass (M{sub star} < 10{sup 5} M{sub ⊙}) dwarfs contribute a negligible amount (≪1%) to the accreted stellar mass and, despite having low average metallicities, supply a small fraction (∼2%–5%) of the very metal-poor stars with [Fe/H] < −2. Dwarfs with masses 10{sup 5} < M{sub star}/M{sub ⊙} < 10{sup 8} provide a substantial amount of the very metal-poor stellar material (∼40%–80%), and even relatively metal-rich dwarfs with M{sub star} > 10{sup 8} M{sub ⊙} can contribute a considerable fraction (∼20%–60%) of metal-poor stars if their metallicity distributions have significant metal-poor tails. Finally, we find that the generic assumption of a quiescent assembly history for the MW halo seems to be in tension with the mass spectrum of its surviving dwarfs. We suggest that the MW could be a “transient fossil”; a quiescent halo with a recent accretion event(s) that disguises the preceding formation history of the halo.

79 ASTRONOMY AND ASTROPHYSICS↗

Stellar Mass Calibrations for Local Low-mass Galaxies

The stellar masses of galaxies are measured from integrated light via several methods—however, few of these methods were designed for low-mass (M ⋆ ≲ 10 8 M ⊙ ) “dwarf” galaxies, whose properties (e.g., stochastic star formation, low metallicity) pose unique challenges for estimating stellar masses. In this work, we quantify the precision and accuracy at which stellar masses of low-mass galaxies can be recovered using UV/optical/IR photometry. We use mock observations of 469 low-mass galaxies from a variety of models, including both semi-empirical models (GRUMPY and UniverseMachine-SAGA) and cosmological baryonic zoom-in simulations (MARVELous Dwarfs and FIRE-2), to test literature color–M ⋆ /L relations and multiwavelength spectral energy distribution (SED) mass estimators. We identify a list of “best practices” for measuring stellar masses of low-mass galaxies from integrated photometry. We find that literature color–M ⋆ /L relations are often unable to capture the bursty star formation histories (SFHs) of low-mass galaxies, and we develop an updated prescription for stellar mass based on g − r color that is better able to recover stellar masses for the bursty low-mass galaxies in our sample (with ∼0.1 dex precision). SED fitting can also precisely recover stellar masses of low-mass galaxies, but this requires thoughtful choices about the form of the assumed SFH: Parametric SFHs can underestimate stellar mass by as much as ∼0.4 dex, while nonparametric SFHs recover true stellar masses with insignificant offset (−0.03 ± 0.11 dex). Finally, we also caution that noninformative (wide) dust attenuation priors may introduce M ⋆ uncertainties of up to ∼0.6 dex.

de los Reyes, Mithi A. C. [Amherst College, MA (Un↗

The Correlation between Halo Mass and Stellar Mass for the Most Massive Galaxies in the Universe

We present measurements of the clustering of galaxies as a function of their stellar mass in the Baryon Oscillation Spectroscopic Survey. We compare the clustering of samples using 12 different methods for estimating stellar mass, isolating the method that has the smallest scatter at fixed halo mass. In this test, the stellar mass estimate with the smallest errors yields the highest amplitude of clustering at fixed number density. We find that the PCA stellar masses of Chen et al. clearly have the tightest correlation with halo mass. The PCA masses use the full galaxy spectrum, differentiating them from other estimates that only use optical photometric information. Using the PCA masses, we measure the large-scale bias as a function of M{sub ∗} for galaxies with logM{sub ∗}⩾11.4, correcting for incompleteness at the low-mass end of our measurements. Using the abundance matching ansatz to connect dark matter halo mass to stellar mass, we construct theoretical models of b(M{sub ∗}) that match the same stellar mass function but have different amounts of scatter in stellar mass at fixed halo mass, σ{sub logM∗}. Using this approach, we find σ{sub logM∗}=0.18{sub −0.02}{sup +0.01}. This value includes both intrinsic scatter as well as random errors in the stellar masses. To partially remove the latter, we use repeated spectra to estimate statistical errors on the stellar masses, yielding an upper limit to the intrinsic scatter of 0.16 dex.

79 ASTRONOMY AND ASTROPHYSICS↗

The Importance of Preventive Feedback: Inference from Observations of the Stellar Masses and Metallicities of Milky Way Dwarf Galaxies

Dwarf galaxies are known to have remarkably low star formation efficiency due to strong feedback. Adopting the dwarf galaxies of the Milky Way (MW) as a laboratory, we explore a flexible semi-analytic galaxy formation model to understand how the feedback processes shape the satellite galaxies of the MW. Using Markov Chain Monte Carlo, we exhaustively search a large parameter space of the model and rigorously show that the general wisdom of strong outflows as the primary feedback mechanism cannot simultaneously explain the stellar mass function and the mass–metallicity relation of the MW satellites. An extended model that assumes that a fraction of baryons is prevented from collapsing into low-mass halos in the first place can be accurately constrained to simultaneously reproduce those observations. The inference suggests that two different physical mechanisms are needed to explain the two different data sets. In particular, moderate outflows with weak halo mass dependence are needed to explain the mass–metallicity relation, and prevention of baryons falling into shallow gravitational potentials of low-mass halos (e.g., “pre-heating”) is needed to explain the low stellar mass fraction for a given subhalo mass.

79 ASTRONOMY AND ASTROPHYSICS↗

Dark matter halo mass functions and density profiles from mass and energy cascade

Abstract Halo abundance and structure play a central role for modeling structure formation and evolution. Without relying on a spherical or ellipsoidal collapse model, we analytically derive the halo mass function and cuspy halo density (inner slope of −4/3) based on the mass and energy cascade theory in dark matter flow. The hierarchical halo structure formation leads to halo or particle random walk with a position-dependent waiting time $$\tau _g$$ τ g . First, the inverse mass cascade from small to large scales leads to the halo random walk in mass space with $$\tau _g\propto m_h^{-\lambda }$$ τ g ∝ m h - λ , where $$m_h$$ m h is the halo mass and $$\lambda$$ λ is a halo geometry parameter with predicted value of 2/3. The corresponding Fokker-Planck solution for halo random walk in mass space gives rise to the halo mass function with a power-law behavior on small scale and exponential decay on large scale. This can be further improved by considering two different $$\lambda$$ λ for haloes below and above a critical mass scale $$m_h^*$$ m h ∗ , i.e. a double- $$\lambda$$ λ halo mass function. Second, a double- $$\gamma$$ γ density profile can be derived based on the particle random walk in 3D space with a position-dependent waiting time $$\tau _g \propto \Phi (r)^{-1} \propto r^{-\gamma }$$ τ g ∝ Φ ( r ) - 1 ∝ r - γ , where $$\Phi$$ Φ is the gravitational potential and r is the particle distance to halo center. Theory predicts $$\gamma =2/3$$ γ = 2 / 3 that leads to a cuspy density profile with an inner slope of −4/3, consistent with the predicted scaling laws from energy cascade. The Press-Schechter mass function and Einasto density profile are just special cases of proposed models. The small scale permanence can be identified due to the scale-independent rate of mass and energy cascade, where density profiles of different halo masses and redshifts converge to the $$-4/3$$ - 4 / 3 scaling law ( $$\rho _h \propto r^{-4/3}$$ ρ h ∝ r - 4 / 3 ) on small scales. Theory predicts the halo number density scales with halo mass as $$\propto m_h^{-1.9}$$ ∝ m h - 1.9 , while the halo mass density scales as $$\propto m_h^{4/9}$$ ∝ m h 4 / 9 . Results were compared against the Illustris simulations. This new perspective provides a theory for nearly universal halo mass functions and density profiles.

79 ASTRONOMY AND ASTROPHYSICS↗

Conditional H I Mass Functions and the H I -to-halo Mass Relation in the Local Universe

We present a new H I mass estimator that relates log 10 (M HI /M * ) to a linear combination of four galaxy properties: stellar surface mass density, color index u - r, stellar mass, and concentration index, with the scatter of individual galaxies around the mean H I mass modeled with a Gaussian distribution function. We calibrate the estimator using the xGASS sample, including both H I detection and nondetection, and constrain the model parameters through Bayesian inferences. Tests with mock catalogs demonstrate that our estimator provides unbiased H I masses for optical samples like SDSS. We apply our estimator to the SDSS spectroscopic sample to estimate the H I mass function (HIMF) of local galaxies, as well as the conditional H I mass function in galaxy groups and the H I –halo mass relation. Our HIMF agrees with the ALFALFA measurements at M HI ≳ 5 × 10 9 M ⊙ , but with higher amplitude and a steeper slope at lower masses. We show that this discrepancy is caused primarily by the cosmic variance, which is corrected for the SDSS sample but not for ALFALFA. The total CHIMFs for all halo masses can be described by a single Schechter function, while those of central galaxies show a double-Gaussian profile. The total H I mass in a group increases monotonically with halo mass, but for central galaxies, the H I mass shows weak dependence on halo mass when M h ≳ 10 12 M ⊙ . The observed H I –halo mass relation is not reproduced by current hydrodynamic simulations and semianalytic models of galaxy formation.

79 ASTRONOMY AND ASTROPHYSICS↗

High-precision mass measurements of the isomeric and ground states of 44 V: Improving constraints on the isobaric multiplet mass equation parameters of the A=44, 0 + quintet

Background: The quadratic isobaric multiplet mass equation (IMME) has been very successful at predicting the masses of isobaric analog states in the same multiplet, while its coefficients are known to follow specific trends as functions of mass number. The Atomic Mass Evaluation 2016 [Chin. Phys. C 41, 030003 (2017)] 44 V mass value results in an anomalous negative c coefficient for the IMME quadratic term; a consequence of large uncertainty and an unresolved isomeric state. The b and c coefficients can provide useful constraints for construction of the isospin-nonconserving Hamiltonians for the pf shell. In addition, the excitation energy of the 0 + , T = 2 level in 44 V is currently unknown. This state can be used to constrain the mass of the more exotic 44 Cr. Purpose: The aim of the experimental campaign was to perform high-precision mass measurements to resolve the difference between 44 V isomeric and ground states, to test the IMME using the new ground state mass value and to provide necessary ingredients for the future identification of the 0 + , T = 2 state in 44 V. Method: High-precision Penning trap mass spectrometry was performed at LEBIT, located at the National Superconducting Cyclotron Laboratory, to measure the cyclotron frequency ratios of [ 44g,m VO] + versus [ 32 SCO] + , a well-known reference mass, to extract both the isomeric and ground state masses of 44 V. Results: The mass excess of the ground and isomeric states in 44 V were measured to be -23 804.9(80) keV/c 2 and -23 537.0(55) keV/c 2 , respectively. This yielded a new proton separation energy of S p = 1 773(10) keV. Conclusion: The new values of the ground state and isomeric state masses of 44 V have been used to deduce the IMME b and c coefficients of the lowest 2 + and 6 + triplets in A = 44. The 2 + c coefficient is now verified with the IMME trend for lowest multiplets and is in good agreement with the shell-model predictions using charge-dependent Hamiltonians. The mirror energy differences were determined between 44 V and 44 Sc, in line with isospin-symmetry for this multiplet. Finally, the new value of the proton separation energy determined, to an uncertainty of 10 keV, will be important for the determination of the 0 + , T = 2 state in 44 V and, consequently, for prediction of the mass excess of 44 Cr.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Main-sequence Scatter is Real: The Joint Dependence of Galaxy Clustering on Star Formation and Stellar Mass

We present new measurements of the clustering of stellar-mass-complete samples of ∼40,000 SDSS galaxies at z ∼ 0.03 as a joint function of stellar mass and specific star formation rate (sSFR). Our results confirm what Coil et al. find at z ∼ 0.7: galaxy clustering is a stronger function of sSFR at fixed stellar mass than of stellar mass at fixed sSFR. We also find that galaxies above the star-forming main sequence (SFMS) with higher sSFR are less clustered than galaxies below the SFMS with lower sSFR, at a given stellar mass. A similar trend is present for quiescent galaxies. This confirms that main-sequence scatter, and scatter within the quiescent sequence, is physically connected to the large-scale cosmic density field. We compare the resulting galaxy bias versus sSFR, and relative bias versus sSFR ratio, for different galaxy samples across 0 < z < 1.2 to mock galaxy catalogs based on the empirical galaxy evolution model of Behroozi et al. This model fits PRIMUS and DEEP2 clustering data well at intermediate redshift, but agreement with SDSS is not as strong. We show that increasing the correlation between galaxy SFR and halo accretion rate at z ∼ 0 in the model substantially improves agreement with SDSS data. Mock catalogs suggest that central galaxies contribute substantially to the dependence of clustering on sSFR at a given stellar mass and that the signal is not simply an effect of satellite galaxy fraction differences with sSFR. Our results are highly constraining for galaxy evolution models and show that the stellar-to-halo mass relation depends on sSFR.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗