Search NASA⌕ Search

SEARCH · Search NASA

Results for “MASS NUMBER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

Nuclear Data Sheets for A = 239

Spectroscopic data and level schemes from radioactive decay and nuclear reaction studies are presented here for all nuclei with mass number A=239. In general, a relatively small amount of new data on this mass chain has been reported since the previous evaluation in 2003. However, special evaluations, such as ''Database of prompt gamma rays from slow neutron–capture from elemental analysis'' (2007ChZX), have provided additional precise data for levels in 29 U. Also, new Coulomb excitation measurements in 239 Pu have extended the knowledge of the 1/2[631] rotational band up to Jπ=(55/2+)Jπ=(55/2+), and that of the octupole vibrational band up to Jπ=(53/2-)Jπ=(53/2-). For historical knowledge it is worth mentioning the report on the “Discovery of isotopes of the transuranium elements with 93 <= Z <= 98'' (2013Fr02), where the information for elements Np, Pu, Am, and Cf with mass number A=239 is presented. The alpha hindrance factors (HF) presented in this evaluation were calculated using values of the radius parameter (r 0 ) interpolated from those for even–even adjacent nuclei given by 1998Ak04.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2018

Solid Particle Number and Mass Emissions from Lean and Stoichiometric Gasoline Direct Injection Engine Operation

In this work, engine-out particle mass (PM) and particle number (PN) emissions were experimentally examined from a gasoline direct injection (GDI) engine operating in two lean combustion modes and one stoichiometric mode with a fuel of known properties. Ten steady state operating points, two constant speed load steps, and an engine cold start were examined. Results showed that solid particles emitted from the engine under steady state stoichiometric conditions had a uniquely broad size distribution that was relatively flat between the diameters of 10 and 100 nm. In most operating conditions, lean homogenous modes can achieve lower particle emissions than stoichiometric modes while improving engine thermal efficiency. Alternatively, lean stratified operating modes resulted in significantly higher PN and PM emissions than both lean homogeneous and stoichiometric modes with increased efficiency only at low engine load. Stoichiometric load steps showed minimal soot emissions while ash-mode emissions spike dramatically due to oil consumption caused by piston ring adjustment. Correlation of PN to PM for steady state stoichiometric cases was in good agreement with that reported from multiple prior studies for both diesel and stoichiometric GDI engines. However, the lean cases resulted in higher PN to PM ratios indicating more small particles per unit mass. High ash particle concentration, especially in lean operation illustrates that oil control is important for mitigating impacts on downstream gasoline particulate filters (GPF) from which ash particles are cannot be removed during filter regeneration. Further research is necessary to elucidate the origin and composition of sub-23 nm particles from GDI engines and their effect on aftertreatment technology if lean homogeneous modes are to be employed.

Bock, Noah↗
DOE OSTI2016

100 TeV pp collisions, Exotics type, PYTHIA8 generator: tev100pp_qstar_pythia8_mbins_slim

Excited Fermions in mass range pT=5-40 TeV. 10000 events per file, 100 files per mass. Compositeness scale (Lambda) is set to the mass of the fermion, so the width is expected to be small (see the log files for details) Cross sections are included in the log files (mass dependent) Note that data are slimmed (see the log file). How to decode name: Name: tev100_pythia8_qstar_m[MASS]_[NUMBER] where [MASS] is generator-level mass as given below: Mass bins (in GeV) m[1]=5000 m[2]=10000 ......... How to use: To get a sample with a given mass, use "glob" regular expressions. Slimmed as: Particle records are slimmed (all stable with pT>0.3 GeV) and (PID=5 || PID=6) or PID>22 && PID<38) or PID>10 && PID<17).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2015

13 TeV pp collisions, Exotics type, PYTHIA8 generator: tev13pp_qstar_pythia8_mbins

Excited Fermions in mass range pT=6-40 TeV. 5000 events per file, 100 files per mass. Compositeness scale (Lambda) is set to the mass of the fermion, so the width is expected to be small (see the log files for details) Cross sections are included in the log files (mass dependent). How to decode name: Name: tev100_pythia8_qstar_m[MASS]_[NUMBER] where [MASS] is generator-level mass as given below: Mass bins (in GeV) m[1]=2000 m[2]=4000 m[3]=6000 m[4]=8000 m[5]=10000 m[6]=12000 m[7]=14000. How to use: To get a sample with a given mass, use "glob" regular expressions. Slimmed as: Particle records are slimmed (all stable with pT>0.3 GeV) and (PID=5 || PID=6) or PID>22 && PID<38) or PID>10 && PID<17).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2015

Measurements of production cross sections of 10Be and 26Al by 120GeV and 392MeV proton bombardment of 89Y, 159Tb, and natCu targets

The production cross sections of 10 Be and 26 Al were measured by accelerator mass spectrometry using 89 Y, 159 Tb, and nat Cu targets bombarded by protons with energies Ep of 120GeV and 392MeV. The production cross sections obtained for 10 Be and 26 Al were compared with those previously reported using Ep=50MeV–24GeV and various targets. It was found that the production cross sections of 10 Be monotonically increased with increasing target mass number when the proton energy was greater than a few GeV. On the other hand, it was also found that the production cross sections of 10 Be decreased as the target mass number increased from that of carbon to those near the mass numbers of nickel and zinc when the proton energy was below approximately 1GeV. They also increased as the target mass number increased from near those of nickel and zinc to that of bismuth, in the same proton energy range. Similar results were observed in the production cross sections of 26 Al, though the absolute values were quite different between 10 Be and 26 Al. The difference between these production cross sections may depend on the impact parameter (nuclear radius) and/or the target nucleus stiffness.

120 GeV proton↗
DOE OSTI2022

Black carbon aerosol number and mass concentration measurements by picosecond short-range elastic backscatter lidar

Abstract Black carbon aerosol emissions are recognized as contributors to global warming and air pollution. There remains, however, a lack of techniques to remotely measure black carbon aerosol particles with high range and time resolution. This article presents a direct and contact-free remote technique to estimate the black carbon aerosol number and mass concentration at a few meters from the emission source. This is done using the Colibri instrument based on a novel technique, referred to here as Picosecond Short-Range Elastic Backscatter Lidar (PSR-EBL). To address the complexity of retrieving lidar products at short measurement ranges, we apply a forward inversion method featuring radiometric lidar calibration. Our method is based on an extension of a well-established light-scattering model, the Rayleigh–Debye–Gans for Fractal-Aggregates (RDG-FA) theory, which computes an analytical expression of lidar parameters. These parameters are the backscattering cross-sections and the lidar ratio for black carbon fractal aggregates. Using a small-scale Jet A-1 kerosene pool fire, we demonstrate the ability of the technique to quantify the aerosol number and mass concentration with centimetre range-resolution and millisecond time-resolution.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1988

PIA update: Correlation analyses of mass spectra

The PIA instrument aboard the Giotto spacecraft (a time of flight spectrometer) has been presented elsewhere. The mass spectra used in this analysis were decoded and mass numbers assigned according to the presence of carbon and silver, using the global values for these elements in their spectral absence. The results presented here were obtained using a frequency of occurrence based on analysis which correlated how often mass numbers appear in the mass spectra and which mass numbers tend to occur together in the same spectra; no amplitude information is utilized. The data are presented as plots of mass vs coincident mass for different subsets of the PIA data set, with both axes having units of atomic mass. Frequency contours are plotted at approximately five percent contour intervals, relative to the maximum AMU occurrence in that plot. The plots presented are symmetrical about the matrix diagonal, i.e., every mass is coincident with itself in a given spectra.

Mason, L. W.↗
DOE OSTI2014

Nuclear Data Sheets for A = 235

Spectroscopic data and level schemes from radioactive decay and nuclear reaction studies are presented here for all nuclei with mass number A=235. The highlight of this evaluation consists of the precise and comprehensive Coulomb excitation study (2012Wa35) on {sup 235}U, which in addition to the 7/2[743] ground state rotational band, extended the 1/2[631], 5/2[622], 5/2[752], and 3/2[631] rotational bands up to Jπ=53/2+, 49/2+, 441/2−, and 43/2+, respectively. This evaluation presents a study (2010Hu02) of the {sup 237}Np({sup 116}Sn, {sup 118}Snγ) reaction where the ground state rotational band 5/2[642] was observed up to Jπ=(53/2+). It is worth for historical knowledge to mention the report on the “Discovery of isotopes of the transuranium elements with 93≤Z≤98” (2013Fr02), where the information for elements Np, Pu, and Am with mass number A=235 is given. {sup 235}Cf has not been observed. The alpha hindrance factors (HF) presented in this evaluation were calculated using values of the radius parameter (r{sub 0}) interpolated from those for even–even adjacent nuclei given by 1998Ak04.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

β Decay of 61 V and its Role in Cooling Accreted Neutron Star Crusts

The interpretation of observations of cooling neutron star crusts in quasipersistent x-ray transients is affected by predictions of the strength of neutrino cooling via crust Urca processes. The strength of crust Urca neutrino cooling depends sensitively on the electron-capture and β -decay ground-state-to-ground-state transition strengths of neutron-rich rare isotopes. Nuclei with a mass number of A = 61 are predicted to be among the most abundant in accreted crusts, and the last remaining experimentally undetermined ground-state-to-ground-state transition strength was the β decay of 61 V. This Letter reports the first experimental determination of this transition strength, a ground-state branching of $8.1^{+4.0}_{- 3.1}%$, corresponding to a log ft value of $5.5^{+0.2}_{-0.2}$. This result was achieved through the measurement of the β -delayed γ rays using the total absorption spectrometer SuN and the measurement of the β -delayed neutron branch using the neutron long counter system NERO at the National Superconducting Cyclotron Laboratory at Michigan State University. This method helps to mitigate the impact of the pandemonium effect in extremely neutron-rich nuclei on experimental results. The result implies that A = 61 nuclei do not provide the strongest cooling in accreted neutron star crusts as expected by some predictions, but that their cooling is still larger compared to most other mass numbers. Finally, only nuclei with mass numbers 31, 33, and 55 are predicted to be cooling more strongly. However, the theoretical predictions for the transition strengths of these nuclei are not consistently accurate enough to draw conclusions on crust cooling. With the experimental approach developed in this work, all relevant transitions are within reach to be studied in the future.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

BSE versus StarTrack: Implementations of new wind, remnant-formation, and natal-kick schemes in NBODY7 and their astrophysical consequences

As a result of their formation via massive single and binary stellar evolution, the masses of stellar-remnant black holes (BH) are subjects of great interest in this era of gravitational-wave detection from binary black hole (BBH) and binary neutron star merger events. In this work, we present new developments in the stellar-remnant formation and related schemes of the current N-body evolution program NBODY7. We demonstrate that the newly implemented stellar-wind and remnant-formation schemes in the stellar-evolutionary sector or BSE of the NBODY7 code, such as the “rapid” and the “delayed” supernova (SN) schemes along with an implementation of pulsational-pair-instability and pair-instability supernova (PPSN/PSN), now produce neutron star (NS) and BH masses that agree nearly perfectly, over large ranges of zero-age-main-sequence (ZAMS) mass and metallicity, with those from the widely recognised StarTrack population-synthesis program. We also demonstrate the new, recipe-based implementations of various widely debated mechanisms of natal kicks on NSs and BHs, such as “convection-asymmetry-driven”, “collapse-asymmetry-driven”, and “neutrino-emission-driven” kicks, in addition to a fully consistent implementation of the standard, fallback-dependent, momentum-conserving natal kick. All the above newly implemented schemes are also shared with the standalone versions of SSE and BSE. Furthermore, all these demonstrations are performed with both the updated standalone BSE and the updated NBODY7/BSE. When convolved with stellar and primordial-binary populations as observed in young massive clusters, such remnant-formation and natal-kick mechanisms crucially determine the accumulated number, mass, and mass distribution of the BHs retained in young massive, open, and globular clusters (GCs); these BHs would eventually become available for long-term dynamical processing. Among other conclusions, we find that although the newer, delayed SN remnant formation model gives birth to the largest number (mass) of BHs, the older remnant-formation schemes cause the largest number (mass) of BHs to survive in clusters, when incorporating SN material fallback onto the BHs. The SN material fallback also causes the convection-asymmetry-driven SN kick to effectively retain similar numbers and masses of BHs in clusters as for the standard, momentum-conserving kick. The collapse-asymmetry-driven SN kick would cause nearly all BHs to be retained in clusters irrespective of their mass, remnant-formation model, and metallicity, whereas the inference of a large population of BHs in GCs would potentially rule out the neutrino-driven SN kick mechanism. Pre-SN mergers of massive primordial binaries would potentially cause BH masses to deviate from the theoretical, single-star ZAMS to mass-remnant mass relation unless a substantial of the total merging stellar mass of up to ≈40% is lost during a merger process. In particular, such mergers, at low metallicities, have the potential to produce low-spinning BHs within the PSN mass gap that can be retained in a stellar cluster and be available for subsequent dynamical interactions. As recent studies indicate, the new remnant-formation modelling reassures us that young massive and open clusters would potentially contribute to the dynamical BBH merger detection rate to a similar extent as their more massive GC counterparts.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Solid particulate mass and number from ducted fuel injection in an optically accessible diesel engine in skip-fired operation

Ducted fuel injection (DFI) is a new combustion strategy that has been shown to significantly attenuate soot formation in diesel engines. While previous studies have used optical diagnostics and optical filter smoke number methods to show that DFI reduces in-cylinder soot formation and engine-out soot emissions, respectively, this is the first study to measure solid particle number (PN) emissions in addition to particle mass (PM). Furthermore, this study quantitatively evaluates the use of transient particle instruments for measuring particles from skip-fired operation in an optical single cylinder research engine (SCRE). Engine-out PN was measured using an engine exhaust particle sizer following a catalytic stripper, and PM was measured using a photoacoustic analyzer. The study improves on earlier preliminary emissions studies by clearly showing that DFI reduces overall PM by 76%–79% and PN for particles larger than 23 nm by 77% relative to conventional diesel combustion at a 1200-rpm, 13.3-bar gross indicated mean effective pressure operating condition. The degree of engine-out PM reduction with DFI was similar across both particulate measurement instruments used in the work. Through the use of bimodal distribution fitting, DFI was also shown to reduce the geometric mean diameter of accumulation mode particles by 26%, similar to the effects of increased injection pressure in conventional diesel combustion systems. This work clearly shows the significant solid particulate matter reductions enabled by DFI while also demonstrating that engine-out PN can be accurately measured from an optical SCRE operating in a skip-fired mode. Based on these results, it is believed that DFI has the potential to enable fuel savings when implemented in multi-cylinder engines, both by lowering the required frequency of active diesel particulate filter regeneration, and by reducing the backpressure imposed by exhaust filtration systems.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2019

Systematic analysis on spectral statistics of odd-A nuclei

Level statistics for given spin and parity below 10 MeV within A≤71, 71≤A≤151, and 151≤A≤221 mass regions are systematically analyzed. We have taken 5316 level spacings from 266 odd-A nuclei in the light mass region, 6897 level spacings from 478 ones in the medium mass region, and 2768 level spacings from 143 ones in the heavy mass region for the statistics. In the analysis, the chaoticity parameter in the Berry–Robnik distribution is determined based on the method of maximum likelihood estimation. The results show a mass number A-dependence in the level statistics. The larger the mass number, the relatively stronger in chaoticity. In addition, with the level statistics in using data sequences classified according to the order of magnitude of half-lives, it is shown that the level energies to be more chaotic for longer lived light and heavy mass odd-A nuclei, and intermediate between regular and chaotic in medium mass odd-A nuclei. The level statistical analysis in concerning E2 transition strengths of E2 or mixed E2+M1 transitions in odd-A nuclei is also made, which shows chaos in level energies likely occurring in those with weaker E2 transition strengths. Therefore, it can be concluded that odd-A nuclei are, more often than not, chaotic. Chaos is likely emergent in level energies of stable light mass nuclei with weaker E2 transition strengths, while it is definitely emergent in level energies of heavy mass nuclei, and even stronger in comparatively stable ones and those with weaker E2 transition strengths.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2014

Cosmological constraints from galaxy clustering and the mass-to-number ratio of galaxy clusters: marginalizing over the physics of galaxy formation

Many approaches to obtaining cosmological constraints rely on the connection between galaxies and dark matter. However, the distribution of galaxies is dependent on their formation and evolution as well as on the cosmological model, and galaxy formation is still not a well-constrained process. Thus, methods that probe cosmology using galaxies as tracers for dark matter must be able to accurately estimate the cosmological parameters. This can be done without knowing details of galaxy formation a priori as long as the galaxies are well represented by a halo occupation distribution (HOD). We apply this reasoning to the method of obtaining Ω {sub m} and σ{sub 8} from galaxy clustering combined with the mass-to-number ratio of galaxy clusters. To test the sensitivity of this method to variations due to galaxy formation, we consider several different models applied to the same cosmological dark matter simulation. The cosmological parameters are then estimated using the observables in each model, marginalizing over the parameters of the HOD. We find that for models where the galaxies can be well represented by a parameterized HOD, this method can successfully extract the desired cosmological parameters for a wide range of galaxy formation prescriptions.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2017

Origin of the heavy elements in binary neutron-star mergers from a gravitational-wave event

The cosmic origin of elements heavier than iron has long been uncertain. Theoretical modelling shows that the matter that is expelled in the violent merger of two neutron stars can assemble into heavy elements such as gold and platinum in a process known as rapid neutron capture (r-process) nucleosynthesis. The radioactive decay of isotopes of the heavy elements is predicted to power a distinctive thermal glow (a ‘kilonova’). The discovery of an electromagnetic counterpart to the gravitational-wave source GW170817 represents the first opportunity to detect and scrutinize a sample of freshly synthesized r-process elements. Here we report models that predict the electromagnetic emission of kilonovae in detail and enable the mass, velocity and composition of ejecta to be derived from observations. We compare the models to the optical and infrared radiation associated with the GW170817 event to argue that the observed source is a kilonova. We infer the presence of two distinct components of ejecta, one composed primarily of light (atomic mass number less than 140) and one of heavy (atomic mass number greater than 140) r-process elements. The ejected mass and a merger rate inferred from GW170817 imply that such mergers are a dominant mode of r-process production in the Universe.

Kasen, Daniel↗
NASA NTRS1994

The r-, s-, and p-Processes in Nucleosynthesis

Burbidge et al (1957) and Cameron (1957) laid out the framework for our understanding of the formation of the heavy nuclei (those nuclei with mass number A approx. greater than 70). From systematics in the solar system abundance distribution, Burbidge et al determined that the heavy nuclei were formed in three distinct nucleosynthetic processes, which they termed the r-, s-, and p-processes. That we still use these terms today is a credit to the soundness of this work done 37 years ago. We may understand how Burbidge et al and Cameron arrived at their conclusions from Figure 1. One population of nuclei, the s-nuclei, shows an abundance distribution with peaks near mass numbers 87, 138, and 208. These nuclei are made in a slow neutron-capture process, the s-process. A rapid neutron-capture process, the r-process, is responsible for the r-nuclei, whose abundance distribution shows peaks at mass numbers 80, 130, and 195. The p-process is responsible for production of the rarer, more proton-rich heavy isotopes (the p-nuclei) that cannot be made by neutron capture. The first quantitative evaluations of the ideas of Burbidge et al and Cameron came to light in the early 1960s with work on the s-process (Clayton et al 1961, Seeger et al 1965) and the r-process (Seeger et al 1965). These calculations further elucidated the mechanisms for heavy-element formation and showed the plausibility of the framework developed in the 1950s. Subsequent work has focused on determining the astrophysical sites where the r-, s-, and p-processes occurred with the help of improved nuclear details, stellar models, and abundances. A goal of this paper is to review the recent progress astrophysicists, astronomers, and physicists have made in these directions and to point out the problems that remain in our understanding of the formation of the heavy nuclei. Another, perhaps deeper, goal is to to seek some understanding of why there are three major processes available to nature for synthesis of heavy elements. It is impossible for a single paper to cover all relevant aspects of the r-, s-, and p-processes; therefore, where possible, references to other reviews are given. Readers should turn to these reviews for more details. Nevertheless, it is hoped that the present paper gives some flavor for the rich field of heavy-element synthesis.

Meyer, Bradley S.↗
DOE OSTI2012

COSMOLOGICAL CONSTRAINTS FROM GALAXY CLUSTERING AND THE MASS-TO-NUMBER RATIO OF GALAXY CLUSTERS

We place constraints on the average density ({Omega}{sub m}) and clustering amplitude ({sigma}{sub 8}) of matter using a combination of two measurements from the Sloan Digital Sky Survey: the galaxy two-point correlation function, w{sub p} (r{sub p} ), and the mass-to-galaxy-number ratio within galaxy clusters, M/N, analogous to cluster M/L ratios. Our w{sub p} (r{sub p} ) measurements are obtained from DR7 while the sample of clusters is the maxBCG sample, with cluster masses derived from weak gravitational lensing. We construct nonlinear galaxy bias models using the Halo Occupation Distribution (HOD) to fit both w{sub p} (r{sub p} ) and M/N for different cosmological parameters. HOD models that match the same two-point clustering predict different numbers of galaxies in massive halos when {Omega}{sub m} or {sigma}{sub 8} is varied, thereby breaking the degeneracy between cosmology and bias. We demonstrate that this technique yields constraints that are consistent and competitive with current results from cluster abundance studies, without the use of abundance information. Using w{sub p} (r{sub p} ) and M/N alone, we find {Omega}{sup 0.5}{sub m}{sigma}{sub 8} = 0.465 {+-} 0.026, with individual constraints of {Omega}{sub m} = 0.29 {+-} 0.03 and {sigma}{sub 8} = 0.85 {+-} 0.06. Combined with current cosmic microwave background data, these constraints are {Omega}{sub m} = 0.290 {+-} 0.016 and {sigma}{sub 8} = 0.826 {+-} 0.020. All errors are 1{sigma}. The systematic uncertainties that the M/N technique are most sensitive to are the amplitude of the bias function of dark matter halos and the possibility of redshift evolution between the SDSS Main sample and the maxBCG cluster sample. Our derived constraints are insensitive to the current level of uncertainties in the halo mass function and in the mass-richness relation of clusters and its scatter, making the M/N technique complementary to cluster abundances as a method for constraining cosmology with future galaxy surveys.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2016

Discussion of isomeric ratios in (p, n) and (d, 2n) reaction

Isomeric ratios (IR) in the (p, n) and (d, 2n) reactions are considered. The dependence of IR values on the projectile type and energy, the target- and product-nucleus spin, the spin difference between the isomeric and ground states of products, and the product mass number is discussed. The isomeric ratios for 46 product nuclei (from {sup 44m,g}Sc to {sup 127m,g}Xe) obtained in reactions where target and product nuclei have identical mass numbers were calculated at energies from the reaction threshold to 50 MeV (with a step of ΔE = 1 MeV). The calculations in question were performed with the aid of the TALYS 1.4 code package. The calculated IR values were compared with their experimental counterparts available from the literature (EXFOR database). In the majority of cases, the calculated IR values agree well with the experimental data in question. It is noteworthy that the IR values obtained in (d, 2n) reactions are substantially greater than those in (p, n) reactions.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2017

Radiochemical study of the kinematics of multi-nucleon transfer reactions in 48 Ca + 248 Cm collisions 10% above the Coulomb barrier

In this paper, the kinematics of multi-nucleon transfer reactions in 48 Ca + 248 Cm collisions at 262 MeV (center of target) was investigated by using a stacked-foil technique and radiochemical separations of trans-curium elements. Trans-curium isotopes were identified by α-particle spectroscopy. For Fm isotopes, by comparing the centroids of the measured post-neutron emission isotope distributions with the most probable primary mass number predicted by Volkov's generalized Q g g systematics, the missing mass (number of evaporated neutrons) is estimated. The latter is compared with that deduced from the measured centroid of the laboratory angular distribution peaked closely to the grazing angle and the centroid of the range distribution, being used to determine the average total kinetic energy loss (TKEL) and the average excitation energy. The latter agrees within the uncertainties with the missing mass so that a consistent picture of the reaction mechanism emerges. For products closer to the target Z, e.g., Cf and Bk, the distributions of kinetic energies are much broader than for Fm, reflecting the fact that in the former, values of TKEL reach from quasi-elastic scattering all the way to deep inelastic scattering. Finally, the measured laboratory angular distribution and the average laboratory kinetic energy of the Fm isotopes, being the prototypes for multi-nucleon transfer products, are benchmark values for the design of electromagnetic separators to be constructed for the separation and detection of unknown neutron-rich transactinides produced in this nuclear reaction type.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗