Search NASA⌕ Search

SEARCH · Search NASA

Results for “MBE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Molecular Beam Epitaxy (MBE) Growth of Model Cathodes to Study Interfacial Ion Diffusion

Lithium-ion batteries (LIBs) have been the focus of research for decades owing to their superior energy storage potential and wide range of applications. However, long-term stability issues still persist in LIB cathodes as the result of the formation of a solid electrolyte interface (SEI), structural transformations, or the loss of active cathode materials. In nanoscale cathodes, it is often impossible to isolate, let alone mitigate the causes of the observed capacity loss. Herein, a novel approach is presented to synthesizing LIB cathode model systems using thin-film molecular beam epitaxy (MBE). Specifically, 100 nm thick LiMn 2 O 4 (LMO) thin-film cathodes are grown on SrRuO 3 /SrTiO 3 (100) single-crystal substrates and characterized in their pristine and cycled states. The pristine thin films exhibit the electro-chemical cycling behavior and structural evolution previously seen in bulk LMO cathodes. The formation of surface-layer rocksalt MnO and spinel Mn 3 O 4 along with the mass-loss associated with the corrosion of active Mn ions is also reported. It is, therefore, demonstrated that these MBE-grown model systems can be used for detailed studies of their surface structures and the electrode/electrolyte interfacial evolution in LIB cathodes, leading to the development of materials for rechargeable batteries with higher capacity and better stability.

25 ENERGY STORAGE↗

MOVPE and MBE growth of semiconductor thin films

Fundamental aspects of MBE and MOVPE growth techniques are briefly discussed. The capabilities and limitation of the two epitaxial growth techniques are summarized. A few examples of the MOVPE and MBE growth of high crystalline quality semiconductor thin films are also given including the characterization results obtained from spectroscopic and high resolution x-ray diffraction methods.

36 MATERIALS SCIENCE↗

MBE growth and donor doping of coherent ultrawide bandgap AlGaN alloy layers on single-crystal AlN substrates

Single-crystal Aluminum Nitride (AlN) crystals enable the epitaxial growth of ultrawide bandgap Al(Ga)N alloys with drastically lower extended defect densities. Here, we report the plasma-MBE growth conditions for high Al-composition AlGaN alloys on single-crystal AlN substrates. An AlGaN growth guideline map is developed, leading to pseudomorphic Al x Ga 1–x N epitaxial layers with x ~0.6–1.0 Al contents at a growth rate of ~0.3 μm/h. These epitaxial layers exhibit atomic steps, indicating step flow epitaxial growth, and room-temperature band edge emission from ~4.5 to 5.9 eV. Growth conditions are identified in which the background impurity concentrations of O, C, Si, and H in the MBE layers are found to be very near or below detection limits. An interesting Si segregation and gettering behavior is observed at the epitaxial AlGaN/AlN heterojunction with significant implications for the formation and transport of 2D electron or hole gases. Well-controlled intentional Si doping ranging from ~2 × 10 17 to 3 × 10 19 atoms/cm 3 is obtained, with sharp dopant density transition profiles. In Si-doped Al 0.6 Ga 0.4 N epilayers, a room-temperature free electron concentration of ~3 × 10 19 /cm 3 , an electron mobility of ~27 cm 2 /V s, and an n-type resistivity of ~7.5 m Ω cm are obtained. Here, the implications of these findings on electronic and photonic devices on single-crystal AlN substrates are discussed.

36 MATERIALS SCIENCE↗

Breaking covalent bonds in the context of the many-body expansion (MBE). I. The purported “first row anomaly” in XH n (X = C, Si, Ge, Sn; n = 1–4)

We present a new, novel implementation of the Many-Body Expansion (MBE) to account for the breaking of covalent bonds, thus extending the range of applications from its previous popular usage in the breaking of hydrogen bonds in clusters to molecules. A central concept of the new implementation is the in situ atomic electronic state of an atom in a molecule that casts the one-body term as the energy required to promote it to that state from its ground state. The rest of the terms correspond to the individual diatomic, triatomic, etc., fragments. Its application to the atomization energies of the XH n series, X = C, Si, Ge, Sn and n = 1–4, suggests that the (negative, stabilizing) 2-B is by far the largest term in the MBE with the higher order terms oscillating between positive and negative values and decreasing dramatically in size with increasing rank of the expansion. The analysis offers an alternative explanation for the purported “first row anomaly” in the incremental H n–1 X–H bond energies seen when these energies are evaluated with respect to the lowest energy among the states of the XH n molecules. Due to the “flipping” of the ground/first excited state between CH 2 ( 3 B 1 ground state, 1 A 1 first excited state) and XH 2 , X = Si, Ge, Sn ( 1 A 1 ground state, 3 B 1 first excited state), the overall picture does not exhibit a “first row anomaly” when the incremental bond energies are evaluated with respect to the molecular states having the same in situ atomic states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Kinetics of short-range order formation in GeSn alloy: MBE vs CVD

Recently, short-range order (SRO) has attracted significant attention, challenging the conventional view of the atomic positions in alloys being random. Furthermore, the presence of SRO has been predicted to have profound effects on the electronic and topological properties of group-IV alloys, offering a different direction in designing group-IV materials for photoelectronic and quantum devices. However, due to the limited understanding of the formation mechanisms, developing effective methods to manipulate SRO in epitaxy is still challenging. To address this, we propose a mechanism for the GeSn alloy, revealing that surface diffusion plays a key role in SRO formation. Building on this mechanism, we show that the distinct surface conditions in MBE and CVD lead to the formation of SRO with enhanced Sn–Sn pairing in MBE-grown samples, while CVD-grown samples remain random alloys. Furthermore, our findings provide an initial understanding of the kinetic process of SRO formation, providing guidance for the design of experiments to manipulate SRO.

Alloys↗

Site-Controlled Growth of GaN Nanorods with Inserted InGaN Quantum Wells on μ-Cone Patterned Sapphire Substrates by Plasma-Assisted MBE

We report on a new approach to fabricate regular arrays of GaN nanorods (NRs) with InGaN QWs by plasma-assisted molecular-beam epitaxy (PA MBE) on micro-cone patterned sapphire substrates (μ-CPSSs). A two-stage PA MBE fabrication process of GaN NRs has been developed, starting with a high temperature nucleation layer growth at metal-rich conditions to aggregate selectively GaN nucleus on c-oriented areas of the μ-CPSSs and followed by growth of 1-μm-thick GaN NRs at strongly nitrogen-rich conditions exactly on the cone tips. These results are explained by energetically favorable GaN growth on the (000-) oriented sapphire surface. Both micro-photoluminescence and micro-cathodoluminescence confirm the formation of regular array of optically and spectrally isolated NRs without usage of any nanolithography.

36 MATERIALS SCIENCE↗

Microlens-Enhanced Substrate Patterning and MBE Growth of GaP Nanowires

In this paper we demonstrate the results on selective area growth of GaP nanowires via self-catalyzed growth method using molecular beam epitaxy (MBE) technique on patterned Si(111) substrates. The pattern fabrication method on a base of the photolithography process over an array of microspherical lenses has been studied theoretically and then optimized in order to obtain the nanostructures with controlled morphology. It was found that the positive resist thickness corresponding to the best achievable resolution in the subwavelength region is 250 nm in case of 1.5 μm silica spheres and excitation with 365 nm LED. The silica growth mask for selective epitaxy was fabricated. The ordered array of GaP nanowires was synthesized with MBE. Large scale ordering and selectivity of the growth technique is demonstrated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

MBE AlGaN/GaN HEMT Heterostructures with Optimized AlN Buffer on Al{sub 2}O{sub 3}

The effect of molecular-beam epitaxy (MBE) growth conditions on properties of AlN epitaxial layers was investigated resulting in determination of optimal substrate temperature and ammonia flow. Optimal substrate temperature for growth of GaN and AlGaN layers was determined analyzing thermal decomposition rate of GaN. Based on the information, high electron mobility transistor heterostructures were grown on sapphire substrates using both ammonia and combined plasma-assisted/ammonia MBE modes. The highest achieved 2DEG mobility was 1992 cm{sup 2}/(V s) (at 2DEG density of 1.17 × 10{sup 13} cm{sup –2}) which is the current state-of-the-art level.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strained Superlattice photocathode development using CBE and MBE

High polarization electron beams for accelerators are generated using strained superlattice GaAs-based photocathodes. A collaboration of researchers at University of California Santa Barbara and Jefferson Lab has been investigating growth of SSL photocathodes using either chemical- or molecular-beam epitaxy (CBE or MBE) to re-establish a source of high polarization photocathode material. While calibrating growth parameters for the now standard GaAs/GaAsP strained superlattice structure, the UCSB personnel encountered the drawbacks of growing structures with phosphorus in a MBE or CBE system, including high vapor pressure byproducts, phosphorus contamination in both the GaAs layer and all subsequent materials grown in that chamber, and highly flammable and toxic chamber residues. For these reasons, the UCSB team began additionally investigating strained superlattices of InAlGaAs/AlGaAs, which has been successfully demonstrated in the literature1, to be a high QE, high polarization photocathode material. For GaAs/GaAsP, varying phosphorus content affects both the band gap and polarization. However for InAlGaAs/AlGaAs, In and Al content can be varied independently and allows optimization of both polarization and bandgap. Several variations on InAlGaAs/AlGaAs superlattice photocathodes, including those with distributed Bragg reflector (DBR) structures to enhance QE, have been grown at UCSB and sent to Jefferson Lab for testing. The initial results are quite promising, with polarization over 80% and QE about 0.3%, and ongoing test results will be presented.

Stutzman, Marcy↗

Possibilities for LWIR detectors using MBE-grown Si(/Si(1-x)Ge(x) structures

Traditionally, long wavelength infrared (LWIR) detection in Si-based structures has involved either extrinsic Si or Si/metal Schottky barrier devices. Molecular beam epitaxially (MBE) grown Si and Si/Si(1-x)Ge(x) heterostructures offer new possibilities for LWIR detection, including sensors based on intersubband transitions as well as improved conventional devices. The improvement in doping profile control of MBE in comparison with conventional chemical vapor deposited (CVD) Si films has resulted in the successful growth of extrinsic Si:Ga, blocked impurity-band conduction detectors. These structures exhibit a highly abrupt step change in dopant profile between detecting and blocking layers which is extremely difficult or impossible to achieve through conventional epitaxial growth techniques. Through alloying Si with Ge, Schottky barrier infrared detectors are possible, with barrier height values between those involving pure Si or Ge semiconducting materials alone. For both n-type and p-type structures, strain effects can split the band edges, thereby splitting the Schottky threshold and altering the spectral response. Measurements of photoresponse of n-type Au/Si(1-x)Ge(x) Schottky barriers demonstrate this effect. For intersubband multiquntum well (MQW) LWIR detection, Si(1-x)Ge(x)/Si detectors grown on Si substrates promise comparable absorption coefficients to that of the Ga(Al)As system while in addition offering the fundamental advantage of response to normally incident light as well as the practical advantage of Si-compatibility. Researchers grew Si(1-x)Ge(x)/Si MQW structures aimed at sensitivity to IR in the 8 to 12 micron region and longer, guided by recent theoretical work. Preliminary measurements of n- and p-type Si(1-x)Ge(x)/Si MQW structures are given.

Hauenstein, Robert J.↗

MBE HgCdTe heterostructure detectors

HgCdTe has been the mainstay for medium (3 to 5 micron) and long (10 to 14 micron) wavelength infrared detectors in recent years. Conventional growth and processing techniques are continuing to improve the material. However, the additional ability to tailor composition and placement of doped layers on the tens of angstroms scale using molecular beam epitaxy (MBE) provides the opportunity for new device physics and concepts to be utilized. MBE-based device structures to be discussed here can be grouped into two categories: tailored conventional structures and quantum structures. The tailored conventional structures are improvements on familiar devices, but make use of the ability to create layers of varying composition, and thus band gap, at will. The heterostructure junction can be positioned independently of doping p-n junctions. This allows the small band gap region in which the absorption occurs to be separated from a larger band gap region in which the electric field is large and where unwanted tunneling can occur. Data from hybrid MBE/liquid phase epitaxy (LPE)/bulk structures are given. Quantum structures include the HgTe-CdTe superlattice, in which the band gap and transport can be controlled by alternating thin layers (tens of angstroms thick) of HgTe and CdTe. The superlattice has been shown to exhibit behavior which is non-alloy like, including very high hole mobilities, two-dimensional structure in the absorption coefficient, resonant tunneling, and anisotropic transport.

Schulman, Joel N.↗

Fabrication of photovoltaic laser energy converterby MBE

A laser-energy converter, fabricated by molecular beam epitaxy (MBE), was developed. This converter is a stack of vertical p-n junctions connected in series by low-resistivity, lattice matched CoSi2 layers to achieve a high conversion efficiency. Special high-temperature electron-beam (e-beam) sources were developed especially for the MBE growth of the junctions and CoSi2 layers. Making use of the small (greater than 1.2 percent) lattice mismatch between CoSi2 and Si layers, high-quality and pinhole-free epilayers were achieved, providing a capability of fabricating all the junctions and connecting layers as a single growth process with one pumpdown. Well-defined multiple p-n junctions connected by CoSi2 layers were accomplished by employing a low growth temperature (greater than 700 C) and a low growth rate (less than 0.5 microns/hour). Producing negligible interdiffusion, the low growth temperature and rate also produced negligible pinholes in the CoSi2 layers. For the first time, a stack of three p-n junctions connected by two 10(exp -5) Ohm-cm CoSi2 layers was achieved, meeting the high conversion efficiency requirement. This process can now be optimized for high growth rate to form a practical converter with 10 p-n junctions in the stack.

Lu, Hamilton↗

High Quality GaAs Growth by MBE on Si Using GeSi Buffers and Prospects for Space Photovoltaics

III-V solar cells on Si substrates are of interest for space photovoltaics since this would combine high performance space cells with a strong, lightweight and inexpensive substrate. However, the primary obstacles blocking III-V/Si cells from achieving high performance to date have been fundamental materials incompatabilities, namely the 4% lattice mismatch between GaAs and Si, and the large mismatch in thermal expansion coefficient. In this paper, we report on the molecular beam epitaxial (MBE) growth and properties of GaAs layers and single junction GaAs cells on Si wafers which utilize compositionally graded GeSi Intermediate buffers grown by ultra-high vacuum chemical vapor deposition (UHVCVD) to mitigate the large lattice mismatch between GaAs and Si. Ga As cell structures were found to incorporate a threading dislocation density of 0.9-1.5 x 10 (exp 6) per square centimeter, identical to the underlying relaxed Ge cap of the graded buffer, via a combination of transmission electron microscopy, electron beam induced current, and etch pit density measurements. AlGaAs/GaAs double heterostructures wre grown on the GeSi/Si substrates for time-resolved photoluminescence measurements, which revealed a bulk GaAs minority carrier lifetime in excess of 10 ns, the highest lifetime ever reported for GaAs on Si. A series of growth were performed to ass3ss the impact of a GaAs buffer to a thickness of only 0.1 micrometer. Secondary ion mass spectroscopy studies revealed that there is negligible cross diffusion of Ga, As and Ge at he III-V/Ge interface, identical to our earlier findings for GaAs grown on Ge wafers using MBE. This indicates that there is no need for a buffer to "bury" regions of high autodopjing,a nd that either pn or np configuration cells are easily accomodated by these substrates. Preliminary diodes and single junction Al Ga As heteroface cells were grown and fabricated on the Ge/GeSi/Si substrates for the first time. Diodes fabricated on GaAs, Ge and Ge/GeSi/Si substrate show nearly identical I-V characteristics in both forward and reverse bias regions. External quantum efficiencies of AlGaAs/GaAs cell structures grown on Ge/GeSi/Si and Ge substrates demonstrated nearly identical photoresponse, which indicates that high lifetimes, diffusion lengths and efficient minority carrier collection is maintained after complete cell processing.

Carlin, J. A.↗

Growth and Characterization of MBE Parametric Variations Upon Polarization Independent Strained Films

The initial goal of this work was to examine the effects of molecular beam epitaxially (MBE) controlled growth kinetics and sample structure design upon GaAs/In(x)Al(1-x)As strained films. These films were tailored in composition to exhibit novel reactions to polarized light. Just as MBE can be used to control the juxtaposition of energy bands in the materials grown, strained layers were used in this work to allow for a wider range of configurations. The combination of strain and, in this case, quantum well width, provided the testbed upon which polarization independent phenomena was examined. In particular, valence band configurations with respect to the localization of light-hole versus heavy-hole bands provided the means by which to understand the photon polarization of in-plane optical transitions in these structures. Now as this work evolved, new materials were synthesized and examined for their exhibition of novel electronic phenomena. Results from the original III-V and now hybrid materials research will provide valuable information in terms of electrical/optical interactions and should be helpful toward improving device performance in next-generation optoelectronic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hybrid MBE Route to Adsorption-Controlled Growth of BaTiO 3 Membranes with Robust Polarization Switching

Freestanding ferroelectric membranes are promising for flexible electronics, nonvolatile memory, photonics, and spintronics, but their synthesis is challenged by the need for reproducibility with precise stoichiometric control. Here, we demonstrate the adsorption-controlled growth of single-crystalline, epitaxial BaTiO 3 films by hybrid molecular beam epitaxy (MBE) on a binary oxide sacrificial layer. Using a simple water-droplet lift-off method, we obtained submillimeter- to millimeter-sized membranes that retained crystallinity, as confirmed by high-resolution X-ray diffraction, and exhibited robust tetragonal symmetry, as verified by Raman spectroscopy. Impedance spectroscopy confirmed a high dielectric constant of ∼1340, reflecting the robust dielectric response of the membranes. Ferroelectric functionality was revealed by piezoresponse force microscopy (PFM) and further verified by polarization-electric field (P-E) loop measurements with Positive-Up-Negative-Down (PUND). The P-E loops exhibited a remnant polarization of ∼5 μC cm –2 and a coercive field of ∼63 kV cm –1 . Furthermore, these results were interpreted in relation to c- and a-domain configurations.

Raman spectroscopy↗

Carrier concentration dependence of donor activation energy in n-type GaN epilayers grown on Si (1 1 1) by plasma-assisted MBE

Highlights: ► The n-type GaN layers were grown by plasma-assisted molecular beam epitaxy. ► The optical characteristics of a donor level in Si-doped GaN were studied. ► Activation energy of a Si-related donor was estimated from temperature dependent PL measurements. ► PL peak positions, FWHM of PL and activation energies are found to be proportional to the cube root of carrier density. ► The involvement of donor levels is supported by the temperature-dependent electron concentration measurements. -- Abstract: The n-type GaN layers were grown by plasma-assisted MBE and either intentionally doped with Si or unintentionally doped. The optical characteristics of a donor level in Si-doped, GaN were studied in terms of photoluminescence (PL) spectroscopy as a function of electron concentration. Temperature dependent PL measurements allowed us to estimate the activation energy of a Si-related donor from temperature-induced decay of PL intensity. PL peak positions, full width at half maximum of PL and activation energies are found to be proportional to the cube root of carrier density. The involvement of donor levels is supported by the temperature-dependent electron concentration measurements.

36 MATERIALS SCIENCE↗

ZnO film with ultra-low background electron concentration grown by plasma-assisted MBE using Mg film as the buffer layer

Highlights: ► High quality ZnO film with ultra-low background electron concentration is grown by plasma-assisted molecular beam epitaxy using Mg film as a buffer layer. ► High resolution X-ray diffraction and photoluminescence (PL) spectroscopy indicate a high degree of crystallization. ► Hall measurement shows a carrier concentration as low as ∼10{sup 14} cm{sup −3}. ► The mechanism of the improved crystallinity is discussed in detail. -- Abstract: High quality ZnO epilayer with background electron concentration as low as 2.6 × 10{sup 14} cm{sup −3} was obtained by plasma-assisted MBE on c-sapphire using a thin Mg film as the buffer layer. High-resolution XRD measurement shows a sharp (0 0 2) peak with full width at half maximum (FWHM) of only 0.029°. Photoluminescence spectroscopy presents a weak defect-related near-edge emission. A metal–semiconductor–metal (MSM) typed photodetector based on the material demonstrates a response of ∼43 A/W under the bias of 1 V and an ON/OFF ratio of 10{sup 4}. This un-doped ZnO with ultra-low background electron concentration could be a promising starting material for p-type doping.

36 MATERIALS SCIENCE↗

Growth of M- and A-plane GaN on LiGaO{sub 2} by plasma-assisted MBE

We have performed non-polar M- and A-plane GaN growth on LiGaO{sub 2}(LGO) by plasma-assisted molecular beam expitaxy (MBE). We demonstrate that non-polar GaN growth on LGO yields high phase purity and flat surfaces. We find that annealing of the substrates prior to growth is a suitable method for avoiding a peeling off of the film from the substrate after growth.

36 MATERIALS SCIENCE↗