Search NASA⌕ Search

SEARCH · Search NASA

Results for “METAL CRYSTAL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Modified Dirac Fermions in the Crystalline Xenon and Graphene Moiré Heterostructure

Abstract The interface between two‐dimensional (2D) crystals often forms a Moiré superstructure that imposes a new periodicity, which is a key element in realizing complex electronic phases as evidenced in twisted bilayer graphene. Acombined angle‐resolved photoemission spectroscopy measurements and first‐principles calculations reveal the formation of a Moiré superstructure between a 2D Dirac semi‐metallic crystal, graphene, and a 2D insulating crystal of noble gas, xenon. Incommensurate diffraction pattern and folded Dirac cones around the Brillouin zone center imply the formation of hexagonal crystalline array of xenon atoms. The velocity of Dirac fermions increases upon the formation of the 2D xenon crystal on top of graphene due to the enhanced dielectric screening by the xenon over‐layer. These findings not only provide a novel method to produce a Moiré superstructure from the adsorption of noble gas on 2D materials, but also to control the physical properties of graphene by the formation of a graphene‐noble gas interface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Interfacial Charge Transfer and Substrate-Dependent Oxidation States Drive SMSI Enhancements in Cobalt Oxide Films

Here, we investigated the mechanisms underlying strong metal-support interactions in CO oxidation using model systems where noble metal crystals support reducible, monolayer-thick CoO x films. The effect of the Co oxidation state, film thickness, and substrate identity were studied in varying reaction conditions using ambient pressure X-ray photoelectron spectroscopy. At low O 2 pressures, the same oxide phase forms on both Pt(111) and Au(111) surfaces. But when heated at higher O 2 pressures, the oxide phase depends on the substrate. We found that CoO x /Pt is more active for the CO oxidation reaction than CoO x /Au, even when both surfaces stabilize the same oxide phase. DFT calculations on these and related noble-metal-supported CoO x films reveal an SMSI-induced reactivity enhancement that strongly depends on the oxide film thickness and which is mediated by charge transfer between the metal and oxide. Charge transfer is also found to correlate with the reaction energy and activation barrier for CO oxidation. This effect was found to be greatest for oxide films on Pt, decreasing on other noble metal supports in the order Pt > Pd > Au > Ag, in agreement with the experiments. The role of charge transfer in the activation barriers and reaction energies provides insight into the nature of SMSI-induced catalytic activity, and suggests that the noble metal work function can serve as an indicator for the strength of SMSI effects.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A cryogenically cooled 200 kV DC photoemission electron gun for ultralow emittance photocathodes

Novel photocathode materials like ordered surfaces of single crystal metals, epitaxially grown high quantum efficiency thin films, and topologically non-trivial materials with dirac cones show great promise for generating brighter electron beams for various accelerator and ultrafast electron scattering applications. Despite several materials being identified as brighter photocathodes, none of them have been tested in electron guns to extract electron beams due to technical and logistical challenges. In this paper, we present the design and commissioning of a cryocooled 200 kV DC electron gun that is capable of testing a wide variety of novel photocathode materials over a broad range of temperatures from 298 to 35 K for bright electron beam generation. This gun is designed to enable easy transfer of the photocathode to various standard ultra-high-vacuum surface diagnostics and preparation techniques, allowing a full characterization of the dependence of beam brightness on the photocathode material and surface properties. We demonstrate the development of such a high-voltage, high-gradient gun using materials and equipment that are easily available in any standard university lab, making the development of such 200 kV electron guns more accessible.

Instruments & Instrumentation↗
DOE OSTI2022

Naturally-meaningful and efficient descriptors: machine learning of material properties based on robust one-shot ab initio descriptors

Establishing a data-driven pipeline for the discovery of novel materials requires the engineering of material features that can be feasibly calculated and can be applied to predict a material’s target properties. Here we propose a new class of descriptors for describing crystal structures, which we term Robust One-Shot Ab initio (ROSA) descriptors. ROSA is computationally cheap and is shown to accurately predict a range of material properties. These simple and intuitive class of descriptors are generated from the energetics of a material at a low level of theory using an incomplete ab initio calculation. We demonstrate how the incorporation of ROSA descriptors in ML-based property prediction leads to accurate predictions over a wide range of crystals, amorphized crystals, metal–organic frameworks and molecules. We believe that the low computational cost and ease of use of these descriptors will significantly improve ML-based predictions.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Trends in Siting of Metals in Heterometallic Nd–Yb Metal–Organic Frameworks and Molecular Crystals

Several studies suggest that metal ordering within metal–organic frameworks (MOFs) is important for understanding how MOFs behave in relevant applications; however, these siting trends can be difficult to determine experimentally. To garner insight into the energetic driving forces that may lead to nonrandom ordering within heterometallic MOFs, we employ density functional theory (DFT) calculations on several bimetallic metal–organic crystals composed of Nd and Yb metal atoms. We also investigate the metal siting trends for a newly synthesized MOF. Our DFT-based energy of mixing results suggest that Nd will likely occupy sites with greater access to electronegative atoms and that local homometallic domains within a mixed-metal Nd–Yb system are favored. We also explore the use of less computationally extensive methods such as classical force fields and cluster expansion models to understand their feasibility for large system sizes. Here, this study highlights the impact of metal ordering on the energetic stability of heterometallic MOFs and crystal structures.

energy of mixing↗
DOE OSTI2021

Metallization of colloidal crystals

Colloidal crystals formed by size-asymmetric binary particles coassemble into a wide variety of colloidal compounds with lattices akin to ionic crystals. Recently, a transition from a compound phase with a sublattice of small particles to a metal-like phase in which the small particles are delocalized has been predicted computationally and observed experimentally. In this colloidal metallic phase, the small particles roam the crystal maintaining the integrity of the lattice of large particles, as electrons do in metals. A similar transition also occurs in superionic crystals, termed sublattice melting. Here, we use energetic principles and a generalized molecular dynamics model of a binary system of functionalized nanoparticles to analyze the transition to sublattice delocalization in different coassembled crystal phases as a function of temperature (T), number of grafted chains on the small particles, and number ratio between the small and large particles n s : n l . Here we find that n s : n l is the primary determinant of crystal type due to energetic interactions and interstitial site filling, while the number of grafted chains per small particle determines the stability of these crystals. We observe first-order sublattice delocalization transitions as T increases, in which the host lattice transforms from low- to high-symmetry crystal structures, including A20 → bct → bcc, A d → bct → bcc, and bcc → bcc/fcc → fcc transitions and lattices. Analogous sublattice transitions driven primarily by lattice vibrations have been seen in some atomic materials exhibiting an insulator-metal transition also referred to as metallization. We also find minima in the lattice vibrations and diffusion coefficient of small particles as a function of n s : n l , indicating enhanced stability of certain crystal structures for n s : n l values that form compounds.

36 MATERIALS SCIENCE↗
DOE OSTI2020

High oxygen pressure floating zone growth and crystal structure of the metallic nickelates R4Ni3O10 ( R=La,Pr )

Single crystals of the metallic Ruddlesden-Popper trilayer nickelates R 4 Ni 3 O 10 ( R = La , Pr ) were successfully grown using an optical-image floating zone furnace under oxygen pressure ( p O 2 ) of 20 bar for La 4 Ni 3 O 10 and 140 bar for Pr 4 Ni 3 O 10 . Furthermore, a combination of synchrotron and laboratory x-ray single-crystal diffraction, high-resolution synchrotron x-ray powder diffraction and measurements of physical properties revealed that R 4 Ni 3 O 10 ( R = La , Pr ) crystallizes in the monoclinic P 2 1 / a ( Z = 2 ) space group at room temperature, and that a metastable orthorhombic phase ( Bmab ) can be trapped by postgrowth rapid cooling. Both La 4 Ni 3 O 10 and Pr 4 Ni 3 O 10 crystals undergo a metal-to-metal transition (MMT) below room temperature. In the case of Pr 4 Ni 3 O 10 , the MMT is found at 157.6 K. For La 4 Ni 3 O 10 , the MMT depends on the lattice symmetry: 147.5 K for Bmab vs 138.6 K for P 2 1 / a . Lattice anomalies were found at the MMT that, when considered together with the pronounced dependence of the transition temperature on subtle structural differences between Bmab and P 2 1 / a phases, demonstrate a not insignificant coupling between electronic and lattice degrees of freedom in these trilayer nickelates.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Mapping charge excitations in generalized Wigner crystals

Transition metal dichalcogenide-based moiré superlattices exhibit strong electron-electron correlations, thus giving rise to strongly correlated quantum phenomena such as generalized Wigner crystal states. Evidence of Wigner crystals in transition metal dichalcogenide moire superlattices has been widely reported from various optical spectroscopy and electrical conductivity measurements, while their microscopic nature has been limited to the basic lattice structure. Theoretical studies predict that unusual quasiparticle excitations across the correlated gap between upper and lower Hubbard bands can arise due to long-range Coulomb interactions in generalized Wigner crystal states. However, the microscopic proof of such quasiparticle excitations is challenging because of the low excitation energy of the Wigner crystal. Here, in this study, we describe a scanning single-electron charging spectroscopy technique with nanometre spatial resolution and single-electron charge resolution that enables us to directly image electron and hole wavefunctions and to determine the thermodynamic gap of generalized Wigner crystal states in twisted WS 2 moiré heterostructures. High-resolution scanning single-electron charging spectroscopy combines scanning tunnelling microscopy with a monolayer graphene sensing layer, thus enabling the generation of individual electron and hole quasiparticles in generalized Wigner crystals. We show that electron and hole quasiparticles have complementary wavefunction distributions and that thermodynamic gaps of ~50 meV exist for the 1/3 and 2/3 generalized Wigner crystal states in twisted WS 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2023

The effect of metals on zeolite crystallization kinetics with relevance to nuclear waste glass corrosion

Abstract Geologic disposal of vitrified radioactive material is planned in several countries, but there are remaining uncertainties related to the long-term stability of glass exposed to groundwater. Specifically, the crystallization of aluminosilicate zeolite minerals can accelerate the rate at which glass corrodes and radioactive material is released into the biosphere. In this study, we identify elemental species that may accelerate or suppress zeolite formation using a protocol to examine their effects on zeolite synthesis over a three-day duration. Our results are consistent with previous works demonstrating glass corrosion acceleration in the presence of calcium. Furthermore, we identify two elements—tin and lithium—as inhibitors of zeolite P2 (gismondine, or GIS type) nucleation and, thus, promising components for promoting the long-term durability of glass waste forms.

36 MATERIALS SCIENCE↗
DOE OSTI2020

An In-situ and Direct Confirmation of Super-Planckian Thermal Radiation Emitted From a Metallic Photonic-Crystal at Optical Wavelengths

Planck’s law predicts the distribution of radiation energy, color and intensity, emitted from a hot object at thermal equilibrium. The Law also sets the upper limit of radiation intensity, the blackbody limit. Recent experiments reveal that micro-structured tungsten can exhibit significant deviation from the blackbody spectrum. However, whether thermal radiation with weak non-equilibrium pumping can exceed the blackbody limit in the far field remains un-answered experimentally. Here, we compare thermal radiation from a micro-cavity/tungsten photonic crystal (W-PC) and a blackbody, which are both measured from the same sample and also in-situ. We show that thermal radiation can exceed the blackbody limit by >8 times at λ=1.7 μm resonant wavelength in the far-field. Our observation is consistent with a recent calculation by Wang and John performed for a 2D W-PC filament. This finding is attributed to non-equilibrium excitation of localized surface plasmon resonances coupled to nonlinear oscillators and the propagation of the electromagnetic waves through non-linear Bloch waves of the W-PC structure. This discovery could help create super-intense narrow band thermal light sources and even an infrared emitter with a laser-like input-output characteristic.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Meniscus Guided Coating and Evaporative Crystallization of UiO-66 Metal Organic Framework Thin Films

Thin-film fabrication of metal organic frameworks (MOFs) has been explored for a range of applications, including separations, catalysis, sensing, and charge transport. However, many fabrication techniques have obstacles, including slow crystallization, control over film thickness, and control over crystallinity. Recently, a meniscus-guided coating technique, called solution shearing, has been shown to create MOF thin films within minutes and with control over the film thickness. However, there have been no previous reports of solution shearing based evaporative crystallization of zirconium-based MOFs, which have been widely studied for the aforementioned applications. In this work, for the first time, we show that (i) the zirconium 1,4-dicarboxybenzene MOF, UiO-66, can be formed using evaporative crystallization during solution shearing, and (ii) a wide range of parameters can be tuned to control the film thickness, coverage, and crystallinity. Finally, we bring the solution shearing technique closer to separation applications by growing a full film of UiO-66 crystals up to the resolution of scanning electron microscopy (SEM) on anodic alumina oxide (AAO). This is the first instance of UiO-66 crystals being formed using an evaporative crystallization-based flow coating method, and solution shearing shows the promise to be applicable to form large area zirconium-based MOF crystals in a rapid manner (within seconds to minutes).

42 ENGINEERING↗
DOE OSTI2021

Absence of long-range magnetic order in Fe 1–δ Te 2 (δ ≈ 0.1) crystals

Transition metal dichalcogenides attract considerable attention due to variety of interesting properties, including long range magnetism in nanocrystals. Here we have investigated magnetic, thermal and electrical properties of FeTe 2 single crystal with iron vacancy defects. Magnetic measurements shows paramagnetic state and the absence of magnetic order with small anisotropy in magnetic susceptibility. Fe 3d orbitals are well hybridized, contributing to bad metal electrical resistivity. Observed thermal conductivity values below room temperature are rather low and comparable to high performance thermoelectric materials. Furthermore, our results indicate that FeTe 2 can form in highly defective marcasite crystal structure which can be exploited in future materials design.

36 MATERIALS SCIENCE↗
DOE OSTI2024

High-Temperature Observation of Intralayer, Interlayer, and Rydberg Excitons in Bulk Van Der Waals Alloy Single Crystals

Transition metal dichalcogenides exhibit remarkable optical properties due to the diverse number of strongly bound excitons, which can be fine-tuned by alloying. Despite a flurry of research activity in characterizing these excitons, a comprehensive and profound understanding of their behavior with temperature is lacking. Here, we report the rich spectrum of excitonic features within bulk van der Waals alloy Mo0.5 W0.5 S2 and Mo0.5 W0.5 Se2 single crystals through temperature-dependent reflectance spectroscopy and first-principles calculations. We observed Rydberg excitons and interlayer excitons in both the single crystals. Notably, we provide the first experimental evidence of highly energetic A' and B' excitons in Mo0.5 W0.5 S2 at room temperature. The strong carrier-phonon scattering significantly broadens the A', B', and interlayer excitons at room temperature in bulk Mo0.5 W0.5 S2 single crystal compared to its selenide. Our findings, supported by density functional theory and Bethe-Salpeter equation calculations, signify the crucial role of carrier-phonon interactions. These results open pathways for next-generation optoelectronic devices and quantum technologies operating at high temperature.

excitons↗