Search NASA⌕ Search

SEARCH · Search NASA

Results for “MICROWAVES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Demonstration of Microwave Resonant Cavity Transducer Performance in Fluid Flow Sensing: Development of Sensor Performance Model of Microwave Cavity Flow Meter for Advanced Reactor High Temperature Fluids

We are investigating a microwave cavity-based transducer for in-core high-temperature fluid flow sensing in molten salt cooled reactors (MSCR) and sodium fast reactors (SFR). This sensor is a hollow metallic cylindrical cavity. The principle of sensing consists of making one wall of the cylindrical cavity flexible enough so that dynamic pressure, which is proportional to fluid velocity, will cause membrane deflection. Membrane deflection causes cavity volume change, which leads to a shift in the resonant frequency. To validate sensor physics, we have performed proof-of-principle test of flow sensing in water. For this test, we have developed a cylindrical resonator for K-band, which was machined from brass. The cavity was excited through WR-42 waveguide through a subwavelength hole on the side of the wall of the cylinder. To increase the spectral signal visibility, we developed a signal processing method for baseline subtraction. A flow loop for proof-of-principle test of transducer performance in water was assembled. A commercial flow meter was installed in the loop for reference measurements. Cylindrical cavity was excited in the TEM 011 mode with resonant frequency f ≈ 17.8GHz. Frequency shift of cavity spectral response was obtained by gradually increasing water flow rate from 0 to 60gpm. Corresponding monotonic increase of resonant frequency shift by several MHz was observed.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2022

Microwave-Assisted Solution Synthesis of Metastable Intergrowth of AgInS2 Polymorphs

The intergrowth of stable and metastable AgInS2 polymorphs was synthesized using a microwave-assisted synthesis. The samples were synthesized in water and in a deep eutectic solvent (DES) consisting of choline chloride and thiourea. An increase in the metal precursor concentration improved the crystallinity of the synthesized samples and affected the particle size. AgInS2 cannot be synthesized from crystalline binary Ag2S or In2S3 via this route. The solution synthesis reported here results in the intergrowth of the thermodynamically stable polymorph (space group I4¯2d, chalcopyrite structure) and the high-temperature polymorph (space group Pna21, wurtzite-like structure) that is metastable at room temperature. A scanning transmission microscopy (STEM) study revealed the intergrowth of tetragonal and orthorhombic polymorphs in a single particle and unambiguously established that the long-thought hexagonal wurtzite polymorph has pseudo-hexagonal symmetry and is best described with the orthorhombic unit cell. The solution-synthesized AgInS2 polymorphs intergrowth has slightly lower bandgap values in the range of 1.73 eV–1.91 eV compared to the previously reported values for tetragonal I4¯2d (1.86 eV) and orthorhombic Pna21 (1.98 eV) polymorphs.

Adeyemi, Adedoyin N. (ORCID:0000000340096150)↗
DOE OSTI2022

Plasma-Assisted Epitaxy of Piezoelectric Sc x Al 1-x N Films on Sapphire for Use in Harsh-Environment Microwave Acoustic Sensors

The Sc x Al 1-x N wurtzite structure has been shown theoretically and experimentally to exhibit significantly higher piezoelectric coupling compared to pure AlN. In this work, a plasma-assisted epitaxial growth method has been used to synthesize epitaxial (0002) Sc x Al 1-x N films on c-sapphire substrates from x = 0.07 to 0.30 by co-evaporating high-purity Sc and Al sources in the presence of a nitrogen plasma generated by an RF plasma source. Epitaxial Sc x Al 1-x N films with highly oriented (0002) grains and in-plane registry were produced on c-sapphire substrates that were pre-exposed to the nitrogen plasma to form an oxynitride seed layer. Growth of Sc x Al 1-x N films was carried out at 930°C under both metal-rich and N-rich conditions using precisely controlled Sc, Al, and N-plasma fluxes. Metal-rich depositions yielded non-(0002)-oriented Sc x Al 1-x N grains and intermetallic ScAl grains. Nitrogen-rich growth with a Sc/Al flux ratio of 1/3 produced the best (0002) epitaxy as determined by x-ray diffraction analysis. Surface acoustic wave resonator (SAWR) devices were fabricated from 500-nm-thick Sc x Al 1-x N and AlN films to extract their electromechanical coupling coefficients, k 2 . As the Sc concentration in the films increases, the degree of (0002) epitaxy is reduced, yet the value of k 2 increases becasue there is more Sc in the wurzite lattice despite the decreased level of (0002) grain alignment. As a result, the use of a 10-nm-thick Si x N y capping layer on top of the Sc x Al 1-x N films aids in preventing etching during SAWR device photolithography and also helps hinder film oxidation up to 800°C.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Comparison of microwave and conventional heating for CO 2 desorption from zeolite 13X

In this study, we investigate microwave irradiation as an alternative to conventional heating for temperature swing adsorption processes. The performance of microwave and conventional heating during sorbent regeneration was evaluated by measuring CO 2 desorption from zeolite 13X at different temperatures. Experimentally, a fixed bed of zeolite 13X was saturated by a 150 sccm flow of 15 % CO 2 at room temperature followed by sorbent regeneration under nitrogen at 55, 100, or 150 °C by applying either microwave irradiation or conventional heating. Microwaves reduced sorbent regeneration times by at least half compared to regeneration by conventional heating. Under conventional regeneration, desorption curves were resolved into two peaks representing physisorbed CO 2 (mass diffusion limited) at low temperature and bicoordinated CO 2 (thermally limited) with increasing temperature. Under microwave regeneration, only one desorption peak was observed suggesting that CO 2 desorption was limited by mass diffusion through the porous zeolite 13X structure, rather than by temperature. Depending on microwave power, apparent activation energy of the microwave-assisted regeneration was 15.8–18.1 kJ/mol, compared to 41.5 kJ/mol for conventional regeneration. The reduction in apparent activation energy is mainly attributed to selective microwave heating of CO 2 adsorption sites (Na + sites) resulting in greater steady state temperatures of Na + relative to framework atoms, suggesting greater heating efficiency due to microwaves compared to conventional heat transfer. Due to rapid cycling and efficient heat transfer to CO 2 sites on zeolite 13X, microwave regeneration is found to increase adsorption/desorption cycling productivity and potentially reduce the energy penalty of temperature swing capture.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Microwave-Assisted Hydrogen Generation from Hydrocarbon-Bearing Reservoir Rocks: Stage-Dependent Thermal Runaway and In-Situ Carbonate Engineering

Microwave-assisted hydrogen generation from hydrocarbon-bearing reservoir rocks is strongly influenced by mineralogy, methane activation, carbonate reactions, and thermal runaway behavior. This study investigates a new approach in which carbonate phases are generated in-situ through the reaction of internally produced CO2 with Ca(OH)2 under microwave heating conditions. The objective is to evaluate how rock mineralogy, methane injection, and Ca(OH)2 addition influence hydrogen generation, carbon redistribution, and stage-dependent reaction pathways during microwave exposure. Microwave heating experiments were conducted using Permian Basin reservoir rocks under three experimental conditions: rock-only experiments under Ar atmosphere, CH4–Ar experiments without additive, and CH4–Ar experiments containing 5 wt% Ca(OH)2. Methane-assisted experiments were performed under continuous injection of 30 standard cubic centimeters per minute (sccm) CH4 and 30 sccm Ar. Based on thermal runaway behavior, each experiment was divided into three operational stages: Before Thermal Runaway (BR), After Thermal Runaway–Decrease in Microwave Power (ARD), and After Thermal Runaway– Increase in Microwave Power (ARI). Temperature and gas composition were continuously monitored throughout the experiments. The rock-only experiments demonstrated that hydrogen generation can occur intrinsically from hydrocarbon-bearing rocks under microwave heating, even without externally injected methane. However, hydrogen production did not correlate solely with kerogen content, indicating that mineralogy strongly influences hydrogen-generation pathways. Correlation analyses suggested that kerogen decomposition initially generated CH4, CO, and CO2, followed by secondary hydrocarbon reactions associated with H2 and C2 hydrocarbon formation. Methane-assisted experiments substantially increased hydrogen production; however, identical methane injection rates produced significantly different hydrogen yields among the rock samples, confirming that mineralogical composition controls methaneconversion behavior under microwave heating conditions. The addition of Ca(OH)2 significantly altered carbon evolution behavior in a stage-dependent manner. During the BR stage, Ca(OH)2 reduced gas-phase CO2 production, particularly in carbonate-rich rocks, indicating favorable conditions for in-situ carbonation and carbonate deposition prior to extensive thermal decomposition. The suppression of CO2 during BR became more pronounced with increasing carbonate content of the rock system. After thermal runaway, carbonate-containing systems exhibited enhanced hydrogen generation behavior, suggesting that carbonatederived mineral transformations and carbonate-mediated reactions contribute to high-temperature hydrogen-generation pathways. In carbonate-poor rocks, Ca(OH)2 addition enabled simultaneous URTeC 4493775 2 enhancement of hydrogen production and partial suppression of CO2 release during the post-runaway stages. Overall, the results demonstrate that microwave-assisted hydrogen generation is governed by dynamically evolving interactions among kerogen decomposition, methane activation, mineral transformations, carbonate formation/decomposition, and thermal runaway behavior. This work introduces in-situ carbonate engineering with Ca(OH)2 as a strategy for coupling hydrogen generation with partial insitu carbon management under microwave heating conditions.

03 NATURAL GAS↗
DOE OSTI2023

The selective heating effect of microwave irradiation on a binary mixture of water and polyethylene oxide: a molecular dynamics simulation approach

In this study, we investigate the molecular mechanisms of a microwave-driven selective heating process by performing molecular dynamics simulations for three different systems including pure water, pure polyethylene oxide (PEO), and water-PEO mixed systems in the presence of a microwave with two different intensities of electric field such as 0.001 V/Å -1 and 0.01 V/Å -1 at a frequency of 100 GHz. First, from performing molecular dynamics simulations of CO and CO 2 in the presence of the microwave, it is confirmed that the molecular dipole moment is responsible for the rotational motion induced by the oscillating electric field. Second, by analyzing the MD simulations of the pure water system, we discover that the dipole moment of water exhibits a time lag with respect to the microwave. During the heating process, however, the temperature, kinetic, and potential energies increase synchronously with the oscillating electric field of the microwave, showing that the heating of the water system is caused by the molecular reaction of water to the microwave. Comparing the water-PEO mixed system to the pure water and pure PEO systems, the water-PEO mixed system has a higher heating rate than the pure PEO system but a lower heating rate than the pure water system. Therefore, we conclude that heating the water-PEO mixed system is driven by water molecules selectively activated by microwave irradiation. Furthermore, we also calculate the diffusion coefficients of water molecules and PEO chains by describing their mean square displacements, demonstrating that the diffusion coefficients are increased in the presence of microwaves for both water and PEO in pure and mixed systems. Lastly, during the microwave heating process, the structures of the water-PEO mixed system are altered as a function of the intensity of electric field, which is mainly driven by the response of water molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

CEM MARS 6 Microwave Incident

A fire occurred in a CEM MARS 6 analytical microwave during microwave-assisted, acid digestion of a soil sample in a Research and Development (R&D) laboratory. The soil sample had been pretreated at 550°C for approximately 4 hours in a furnace prior to digesting in the microwave. Less than 1-gram aliquots of the pretreated soil sample were placed into separate microwave reaction vessels along with an acid mixture used for digestion. The microwave was used to facilitate digestion of the samples. Microwave reaction vessels were loaded with acid and soil samples, sealed in cassettes, and the cassettes placed onto a microwave carousel. A temperature probe that senses the reaction temperature during the run was inserted into the Reference Cell thermowell. The contents of the Reference Cell were identical to the contents of the other reaction cells. The researcher initiated the run and then left the laboratory to perform other work. Upon returning to check the digestion run, flames and smoke were observed originating from the microwave. The researcher exited the lab, immediate emergency actions were taken, and the local fire department responded and extinguished the fire. No personnel were injured, and no facility structural damage occurred. The affected microwave is a total loss. The fire investigation revealed the most credible cause of the fire is an incompatible temperature probe that did not accurately measure temperature of the liquid phase of the Reference sample.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Microwave-assisted conversion of methane over H-(Fe)-ZSM-5: Evidence for formation of hot metal sites

We report microwave-assisted catalysis offers great promise as an “intensified” technology for chemical processing. The present study investigates microwave-assisted direct conversion of methane with focus on the design and evaluation of microwave-sensitive H-(Fe)ZSM-5 catalysts for the existence of hotspot formation. Isomorphous substituted H-(Fe)ZSM-5 catalysts are tuned to identify key design parameters that control their microwave sensitivity. Increasing the amount of Al and Fe substitution in the zeolite lattice is found to result in higher microwave sensitivity due to improved dielectric properties and hence facilitated microwave heating of the catalyst bed. Comparison between the performance of these catalysts in a conventional thermally-heated (CH) fixed-bed and a microwave (MW) reactor allows identification of the effect of microwave irradiation on the catalyst activity. Methane conversion is drastically enhanced at MW conditions (from 3% at CH conditions to 40% at MW conditions), indicating accelerated methane activation over the metal site and hence suggesting a hot metal site despite much lower catalyst bulk temperature measured in the microwave reactor. The existence of metal hotspot formation is further supported by the reaction product distribution and spent catalyst analysis. At MW conditions, C 2 (ethane and ethylene) and coke (mainly carbon nanotubes and nanofibers) selectivity are much higher at the cost of aromatics make compared to CH conditions. This can be explained by reduced aromatization activity at the Brønsted acid sites of the zeolite due to its lower relative temperature of the zeolite. The much-enhanced metal aggregation observed in the spent catalyst from the MW reactor along with the distribution of coke species further confirms the existence of selective heating (i.e. hotspot formation) occurring at the active metal site in the catalyst at MW conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Coherent microwave scattering from resonance enhanced multi-photon ionization (Radar REMPI): A review

Coherent microwave scattering from laser-induced plasmas, including weakly ionized plasma, laser sparks, Multiphoton Ionization (MPI), and Resonance Enhanced Multi-Photon Ionizations (Radar REMPI) has achieved much successes in plasma, reactive and nonreactive flow diagnostics. Under illumination of microwaves (Radar), electrons inside the laser-induced plasma oscillate with the electric field of the microwave and re-radiate from the electrons forming coherent scattering. In the far-field approximation, the microwave scattering from the small volume plasma reflects the generation and evolution of unbounded electrons inside the plasma, when the microwave wavelength is much greater than the size of the plasma and the skin layer depth at the microwave frequency is larger than the size of the plasma. Laser excitation schemes, microwave detection methods, calibration of microwave scattering, and the novel applications of the technique have been significantly expanded and improved. Furthermore, this review paper summarizes physical principles, various REMPI excitation schemes for atomic and molecular species, and temperature measurements in plasma and reactive flows. Discussions on new research directions and applications are given at the end.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Microwave and Optical Entanglement for Quantum Transduction with Electro-Optomechanics

Quantum transduction refers to the coherent conversion between microwave and optical states, which can be achieved by quantum teleportation if given high-fidelity microwave-optical entanglement, namely entanglement-based quantum transduction. Reliable microwave-optical entanglement can be generated using various platforms. Here, in this paper we base the discussion on a piezo-optomechanical system and make the teleportation induced conversion scheme more concrete in the framework of quantum channel theory. By comparing the quantum capacity between the entanglement-based conversion channel and the traditional direct quantum transduction channel, we show that the entanglement-based scheme indeed admits a positive transduction rate when the direct quantum transduction has zero quantum capacity. Given two piezo-optomechanical systems, we also investigate the generation of microwave-microwave entanglement from entanglement swapping within continuous-variable and discrete-variable settings, showing the potentials of directly connecting microwave quantum processors by microwave-microwave quantum teleportation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗