Search NASA⌕ Search

SEARCH · Search NASA

Results for “MOLECULAR FLOW”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Velocity Measurements in Channel Gas Flows in the Slip Regime by means of Molecular Tagging Velocimetry

Direct measurements of the slip velocity in rarefied gas flows produced by local thermodynamic non-equilibrium at the wall represent crucial information for the validation of existing theoretical and numerical models. In this work, molecular tagging velocimetry (MTV) by direct phosphorescence is applied to argon and helium flows at low pressures in a 1-mm deep channel. MTV has provided accurate measurements of the molecular displacement of the gas at average pressures of the order of 1 kPa. To the best of our knowledge, this work reports the very first flow visualizations of a gas in a confined domain and in the slip flow regime, with Knudsen numbers up to 0.014. MTV is cross-validated with mass flowrate measurements by the constant volume technique. The two diagnostic methods are applied simultaneously, and the measurements in terms of average velocity at the test section are in good agreement. Moreover, preliminary results of the slip velocity at the wall are computed from the MTV data by means of a reconstruction method

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2026

New Perspectives on Vibrational Energy Transfer in Energetic Materials: Insights from Pressure-Tuned Ultrafast Spectroscopy

Understanding the manner in which vibrational energy flows between molecular and lattice vibrations is of great interest in physical chemistry due to its central role in reactivity and energy dissipation in molecular materials. Here, in this feature article, we highlight our recent efforts employing ultrafast broadband infrared spectroscopy toward understanding the interplay between molecular and lattice vibrations in energetic materials, motivated by the open questions surrounding the role of vibrational energy transfer (VET) in reaction initiation in these materials. Our work addresses the ongoing debate on the participation of doorway modes in VET. We further present new results from high-pressure ultrafast experiments on RDX, a hydrogen-bonded material, and BNFF, a hydrogen-free material, to explore how intermolecular interaction strength governs VET pathways and time scales. Collectively, our findings reveal that vibrational dynamics in these systems occurs across three distinct time regimes, with VET being incomplete out to hundreds of picoseconds, suggesting the importance of considering nonstatistical reactions in the modeling of these materials. These time scales vary as intermolecular interaction strength is indirectly modified by application of static pressure, indicating dramatic changes to the vibrational structure of these materials under shock-relevant conditions. Our results thus shed light on how intermolecular interactions shape vibrational energy redistribution in molecular materials, and highlight the need for further theoretical and experimental investigation.

Carlson, Daniel Ryan [Sandia National Laboratories↗
DOE OSTI2024

Dynamic population balance in molecular-level simulations of hypersonic flows

This report summarizes the work towards developing stochastic weighted particle methods (SWPM) for future application in hypersonic flows. Extensive changes to Sandia’s direct simulation Monte Carlo (DSMC) solver, SPARTA (Stochastic Particle Real Time Analyzer), were made to enable the necessary particle splitting and reduction capabilities for SWPM. The results from one-dimensional Couette and Fourier flows suggest that SWPM can reproduce the correct transport for a large range of Knudsen numbers with adequate accuracy. The associated velocity and temperature profiles are in good agreement with DSMC. An issue with particle placement during particle number reduction, is identified, to which, a simple but effective solution based on minimizing the center of mass error is proposed. High Mach wheel flows are simulated using the SWPM and DSMC methods. SWPM is capable of providing nearly an order of magnitude increase in efficiency over DSMC while retaining high accuracy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Reduced Order Model to Predict Dispersion of Flammable Refrigerant into a Space

As the HVAC&R industry mobilizes to deploy more low-GWP refrigerants, relevant standards are being continually reviewed and updated. Those include the general safety standards ISO 5149 and ASHRAE 15, and the equipment standards IEC and UL. The standards systematically set the allowable maximum amount of refrigerant that should be used in different equipment types and different applications. To do so, they rely on predictions of how a leaked refrigerant mass will disperse into a space. Dispersion characteristics, such as total flammable volume and its residence time, determine the risk associated with the presence of the flammable refrigerant. The standards have included provisions for the use of flammable refrigerants for approximately two decades. They relied on limited analytical analyses and test cases in their development. Dispersion of a refrigerant into a space is complex. Computational fluid dynamics (CFD) are the most accurate in predicting a given problem. However, CFD is computationally expensive and requires specialized expertise and resources and is not suitable for use by standards development working group as prediction tool. This paper presents the development of a reduced order model (ROM) that predicts the key dispersion characteristics relevant to the dispersion of a leaked refrigerant into a space for any combination of input variables. The inputs are the refrigerant release height, the total released refrigerant mass and its release flow rate, the refrigerant molecular weight, the ventilation flow rate, the floor area and height of the space, recirculation air flow rate, and the tightness of the space. The outputs are histograms of volume fraction of the room in prescribed concentration bins and the total mass of the refrigerant in each bin normalized by the total refrigerant charge at 13 prescribed simulation time stamps between 1 and 900 seconds. The ROM is constructed from a set of CFD simulations with carefully chosen combinations of input parameters. The selection if done using a multidimensional sparse grid which is a generalization of the classical tensor approach but offers additional flexibility and thus can be more carefully tuned towards a specific model. The tuning is done to improve the accuracy, measured in the difference between the output values of the ROM and the CFD model, while minimizing the computational cost, measured in number of CFD simulations which is orders of magnitude more expensive than the processing the training data.

Edwards, Dean↗
DOE OSTI2024

One-dimensional temperature measurement of supersonic jet flow by resonantly ionized photoemission thermometry of molecular nitrogen

As the field of fluid dynamics progresses, the demand for sophisticated diagnostic methods to accurately assess flow conditions rises. In this work, resonantly ionized photoemission thermometry (RIPT) has been used to directly target and ionize diatomic nitrogen (N 2 ) to measure one-dimensional (1D) temperature profiles in a supersonic jet flow. This technique can be considered non-intrusive as the premise uses resonantly enhanced multiphoton ionization (REMPI) to target molecular nitrogen. This resonance excites N 2 into absorption bands of the P, Q, and R rotational branches of N 2 ( b 1 Π u ). The ideal (3 + 1) REMPI scheme excites from the ground state and ionizes N 2 ( b 1 Π u ← X 1 Σ g + ) where de-excitation results in photoemission from the first negative band of ionized N 2 + ( B 2 Σ u + → X 2 Σ g + ) as nitrogen returns to the ground state. The resulting emission can be observed using an intensified camera, thus permitting inference of the rotational temperature of ground-state molecular nitrogen. A linearly regressive Boltzmann distribution is applied based on previous calibration data for this technique to quantify the temperature along the ionized line. This work applies this technique to a pure N 2 supersonic jet in cross-flow and counter-flow orientations to demonstrate N 2 RIPT’s applications in a supersonic flow. Temperature variations are observed at different locations downstream of the exit in cross-flow, and axisymmetric in counter-flow, to generate profiles characterizing the flow dynamics. Due to the collisional effects resulting from the number density of N 2 at higher pressures, a (3 + 2) REMPI scheme is observed throughout this text.

Clark, Aleksander (ORCID:0009000855600042)↗
DOE OSTI2021

Modeling the Nonlinear Rheology of Polymer Additive Manufacturing

This report summarizes molecular and continuum simulation studies focused on developing physics - based predictive models for the evolution of polymer molecular order during the nonlinear processing flows of additive manufacturing. Our molecular simulations of polymer elongation flows identified novel mechanisms of fluid dissipation for various polymer architectures that might be harnessed to enhance material processability. In order to predict the complex thermal and flow history of polymer realistic additive manufacturing processes, we have developed and deployed a high - performance mesh - free hydrodynamics module in Sandia's LAMMPS software. This module called RHEO – short for Reproducing Hydrodynamics and Elastic Objects – hybridizes an updated - Lagrange reproducing - kernel method for complex fluids with a bonded particle method (BPM) to capture solidification and solid objects in multiphase flows. In combination, our two methods allow rapid, multiscale characterization of the hydrodynamics and molecular evolution of polymers in realistic processing geometries.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Effect of CO 2 on the water slip flow at silica surfaces for nanometer slit pores of talc

In our previous study, Molecular Dynamics (MD) simulated water flow with no dissolved gas in nanometer slit pores of the hydrophobic talc surfaces revealed a slip length of about 0.5 nm, which is close to the size of “water exclusion zone” but much less than experimental slip length. Atomic Force Microscopy (AFM) imaging confirmed the presence of pancake shape nanobubbles at the hydrophobic talc (001) surface (size from tens to hundreds of nanometers). The effect of CO 2 on water slip flow in talc nanopores is reported to reveal the importance of dissolved gas for confined fluid flow. MD simulated 7 nm CO 2 nanobubbles were found to attach and spread at the talc (001) surface, consistent with the AFM observation. Simulated CO 2 saturated water flow in the slit pores of talc (001) surfaces predicted the generation of CO 2 nanobubbles at the end of the slit pore, due to the stabilization of a CO 2 film at the talc (001) surfaces and a water barrier at the edge surfaces of talc. A “critical thickness” of about 1.5 nm was found for CO 2 nanobubbles to be stabilized at the end of the talc (001) surface. With 1.5 nm CO 2 nanobubbles at the talc (001) surface of a 6 nm slit pore, a water slip length of 1.8 nm was determined. Furthermore, the nanometer slit pore simulations with dissolved CO 2 in water revealed an increased slip length. It is expected that an increased slip length value would be found with an increased CO 2 film thickness.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Molecular Viscosity and Diffusivity Effects in Transitional and Shock-Driven Mixing Flows

Here, this paper investigates the importance of molecular viscosity and diffusivity for the prediction of transitional and shock-driven mixing flows featuring high and low Reynolds and Mach number regions. Two representative problems are computed with implicit large-eddy simulations using the inviscid Euler equations (EE) and viscous Navier-Stokes equations (NSE): the Taylor-Green vortex at Reynolds number Re = 3000 and initial Mach number Ma = 0.28, and an air- SF 6 -air gas curtain subjected to two shock waves at Ma = 1.2. The primary focus is on differences between NSE and EE predictions due to viscous effects. The outcome of the paper illustrates the advantages of utilizing NSE. In contrast to the EE, where the effective viscosity decreases upon grid refinement, NSE predictions can be assessed for simulations of flows with transition to turbulence at prescribed constant Re. The NSE can achieve better agreement between solutions and reference data, and the results converge upon grid refinement. On the other hand, the EE predictions do not converge with grid refinement, and can only exhibit similarities with the NSE results at coarse grid resolutions. We also investigate the effect of viscous effects on the dynamics of the coherent and turbulent fields, as well as on the mechanisms contributing to the production and diffusion of vorticity. The results show that nominally inviscid calculations can exhibit significantly varying flow dynamics driven by changing effective resolution-dependent Reynolds number, and highlight the role of viscous processes affecting the vorticity field. These tendencies become more pronounced upon grid refinement. The discussion of the results concludes with the assessment of the computational cost of inviscid and viscous computations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Modified Lucas-Washburn theory for fluid filling in nanotubes

Ultrafast water transport in carbon nanotubes (CNTs) has drawn a great deal of attention in a number of applications, such as water desalination, power generation, and biomolecule detection. With the recent experimental advances in water filling of isolated CNTs, the Lucas-Washburn theory for capillary rise in tubes needs to be revisited for a better understanding of the physics and dynamics of water filling in CNTs. Here, the Lucas-Washburn theory is corrected for the hydrodynamic entrance effects as well as the variation of capillary pressure and hydrodynamic properties with the radius and length of CNTs. Due to the large slippage in CNTs, inclusion of the entrance effects is important particularly for the initial stages of filling where a L ∝ t scaling, as opposed to L 2 ∝ t , is observed in our molecular dynamics (MD) simulations. The corrected Lucas-Washburn theory is shown to predict the water filling dynamics in CNTs as observed in MD simulations. With the corrected theory, we achieve a better understanding of capillary rise and water filling dynamics in CNTs.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

Non-equilibrium molecular dynamics simulation to evaluate the effect of confinement on fluid flow in silica nanopores

The flow of fluids in nano-confinement has applications in separations, water purification, medical systems and in the recovery of fluids in petroleum systems. It is believed that fluids do not obey continuum laws when flowing in nanopores (or in confinement). This paper attempts to shed light on various nano confinement effects such as fluid-wall interactions, pore size and molecular geometry, using molecular dynamic simulation. Here, water, hexane, and methanol flow behaviors were simulated for pore diameters ranging from 1 to 8 nm. In addition to the density analysis of the confined fluids, the fluid flows in saturated nanopores were simulated by the sectional flow method. Water and methanol molecules were completely stabilized in the 1 nm pore. Hexane molecules could not enter the 1 nm pore, due to geometric considerations. For the 2 – 8 nm pores, all fluids showed reduced flow rate compared to the Hagen–Poiseuille flow, due to an interfacial molecular layer stabilized at the pore surface. Flow reduction observed in these studies is contrary to significant flow enhancements observed for fluid flow in carbon nanotubes of similar dimensions. Water flow showed almost constant stick length for all the pore sizes. Methanol flow had the largest stick length. Hexane flow was reduced because of overcrowding of molecules at the pore surface. The effect of confinement diminished with an increase in pore diameter.

42 ENGINEERING↗
DOE OSTI2023

Computing dissipation for molecular-level turbulence simulations

A major difficulty in the analysis of molecular-level simulations is that macroscopic flow quantities are inherently noisy due to molecular fluctuations. An important example for turbulent flows is the kinetic energy dissipation rate. Traditionally, this quantity is calculated from gradients of the macroscopic velocity field, which exacerbates the noise problem. The inability to accurately compute the dissipation rate makes meaningful comparison of molecular-level and continuum simulation results a serious challenge. Herein, we extend previously developed coarse-graining theories to derive an exact molecular-level expression for the dissipation rate, which would circumvent the need to compute gradients of noisy fields. Although the exact expression cannot feasibly be implemented in Sandia’s direct simulation Monte Carlo (DSMC) code SPARTA, we utilize an approximate “hybrid” approach and compare it to the conventional gradient-based approach for planar Couette flow and the two-dimensional Taylor-Green vortex, demonstrating that the hybrid approach is significantly more accurate. Finally, we explore the possibility of adopting a Lagrangian approach to calculate the energy dissipation rate.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Interlayer Triplet-Sensitized Luminescence in Layered Two-Dimensional Hybrid Metal-Halide Perovskites

In this work, we review an emerging class of 2D layered metal-halide perovskites that exhibit important photophysical behavior involving inorganic exciton-to-molecular triplet energy flow. These novel systems have potential to impact several energy-related fields and processes, including optoelectronics, photon upconversion strategies, and triplet-based photocatalysis. Early studies provided initial guidance and revealed several intriguing questions that more recent developments, in terms of both expanded and diversified compositional tuning and more sophisticated characterization, have begun to answer. These questions center around the delicate interplay between physical and electronic structure that is perturbed by choice of perovskite structural motif and organic spacer properties. In addition to their distinct natures, the energy offsets between the metal-halide and molecular excitons can be leveraged for a variety of unique effects and emergent properties, including fast interlayer energy transfer. We review the key advances with an eye toward strategies for controlling photophysical outcomes based on structure-energy-function relationships.

14 SOLAR ENERGY↗
DOE OSTI2023

First principles simulation of reacting hypersonic flow over a blunt wedge

This article presents molecular-level analysis of a reactive, near-continuum, Mach 21 nitrogen flow over a blunt wedge using the direct molecular simulation (DMS) method. The flow conditions lead to internal energy excitation and dissociation in the flow field, resulting in thermal and chemical nonequilibrium in the flow. Thermal nonequilibrium in the vibrational mode is observed to extend to the molecular level, where the vibrational energy distributions at various points in the flow field are observed to be non-Boltzmann. Furthermore, this is the first reactive DMS calculation where the wall is assumed to be isothermal and full momentum accommodation of the particles is enforced, hence incorporating viscous wall effects. Since the DMS method uses a quantum mechanically generated interaction potential as its only modeling input, all thermochemical and transport properties of the flow field can directly be attributed to the ab initio potential energy surface. Using the DMS solution as a benchmark, this article assesses the performance of Navier–Stokes computational fluid dynamics solutions using lower fidelity two-temperature models. Two models are chosen as points of comparison: the well-known Park two-temperature model and the recently developed modified Marrone and Treanor model.

Mechanics↗