Search NASA⌕ Search

SEARCH · Search NASA

Results for “MOLECULAR INTERACTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Radiative interactions in molecular gases under local and nonlocal thermodynamic equilibrium conditions

Basic formulations, analyses, and numerical procedures are presented to investigate radiative heat interactions in diatomic and polyatomic gases under local and nonlocal thermodynamic equilibrium conditions. Essential governing equations are presented for both gray and nongray gases. Information is provided on absorption models, relaxation times, and transfer equations. Radiative flux equations are developed which are applicable under local and nonlocal thermodynamic equilibrium conditions. The problem is solved for fully developed laminar incompressible flows between two parallel plates under the boundary condition of a uniform surface heat flux. For specific applications, three diatomic and three polyatomic gases are considered. The results are obtained numerically by employing the method of variation of parameters. The results are compared under local and nonlocal thermodynamic equilibrium conditions at different temperature and pressure conditions. Both gray and nongray studies are conducted extensively for all molecular gases considered. The particular gases selected for this investigation are CO, NO, OH, CO2, H2O, and CH4. The temperature and pressure range considered are 300-2000 K and 0.1-10 atmosphere, respectively. In general, results demonstrate that the gray gas approximation overestimates the effect of radiative interaction for all conditions. The conditions of NLTE, however, result in underestimation of radiative interactions. The method developed for this study can be extended to solve complex problems of radiative heat transfer involving nonequilibrium phenomena.

Tiwari, S. N.↗
NASA NTRS1981

A molecular model for ice nucleation and growth, attachment 1

The quantum mechanical technique is used to study ionic, configurational, and impurity defects in the ice surface. In addition to static calculations of the energetics of the water monomer-ice surface interactions, molecular dynamics studies were initiated. The calculations of the monomer-ice surface interaction, molecular dynamics studies were initiated. The calculations of monomer-ice surface interactions indicate that many adsorption sites exist on the ice surfaces and that the barriers between bonding sites are relatively low. Bonding on the prism face of ice is preferentially above lattice sites.

Plummer, P. L. M.↗
DOE OSTI2025

Elucidating molecular scale interactions underlying the freezing behavior of salt solutions in silica nanopores

Elucidating the influence of nanoscale confinement on the freezing behavior of salt solutions is of fundamental interest to environmental security and materials science and engineering. Specific structural information such as the coordination environment of ions in confined aqueous medium, effects on the extended hexagonal network of water molecules and their mutual non-bonding interactions in confinement are sparse in the literature along with the change in the dynamical characteristics of water in the presence of ions. To address these knowledge gaps, the current study is focused on investigating the influence of reduced dimensionality arising from nanoscale confinement on the structural evolution of salt solutions on freezing and the associated fluid–surface interactions. In this regard, operando wide-angle X-ray scattering (WAXS) measurements and classical molecular dynamics (MD) simulations are conducted with water and 0.5 M CaCl 2 , MgCl 2 and KCl solutions confined in 4 nm sized SBA-15 silica pores upon cooling from 300 K to 200 K. The freezing point of the salt solutions is depressed to 235 K which is about 10 K lower than that of confined water. The translational dynamics of confined salt solutions indicates shifts in the fragile-to-strong dynamical crossover to a lower temperature compared to pure water. The strong electrostatic attraction between the cations and the surrounding water molecules contributes to the freezing point depression in confined salt solutions. These insights unlock the molecular-scale basis and mechanisms underlying the freezing behavior of confined salt solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1991

New approach in direct-simulation of gas mixtures

Results are reported for an investigation of a new direct-simulation Monte Carlo method by which energy transfer and chemical reactions are calculated. The new method, which reduces to the variable cross-section hard sphere model as a special case, allows different viscosity-temperature exponents for each species in a gas mixture when combined with a modified Larsen-Borgnakke phenomenological model. This removes the most serious limitation of the usefulness of the model for engineering simulations. The necessary kinetic theory for the application of the new method to mixtures of monatomic or polyatomic gases is presented, including gas mixtures involving chemical reactions. Calculations are made for the relaxation of a diatomic gas mixture, a plane shock wave in a gas mixture, and a chemically reacting gas flow along the stagnation streamline in front of a hypersonic vehicle. Calculated results show that the introduction of different molecular interactions for each species in a gas mixture produces significant differences in comparison with a common molecular interaction for all species in the mixture. This effect should not be neglected for accurate DSMC simulations in an engineering context.

Chung, Chan-Hong↗
DOE OSTI2025

Effect of Solvents on Lignin–Surface Interactions via Molecular Dynamics Simulations

Lignin, an essential building block of lignocellulosic biomass, is a potential abundant source of aromatic monomers for the polymer and chemical industry. Reductive catalytic fractionation (RCF) is one promising process that can produce high yields of phenolic monomers and oligomers from lignin under different catalytic conditions. An important choice in optimizing RCF is the selection of solvent; however, detailed insights into solvent effects on lignin behaviors and interactions remain limited. Here, in this work, we perform all-atom molecular dynamics simulations to study the solvation of lignin, solvent-mediated conformational changes, and the interaction of solvated lignin oligomers with model surfaces. We focus on the behavior of an oligomeric lignin model compound in methanol, ethanol, a binary mixture of ethanol and water, and water at both the RCF reaction temperature (473 K) and room temperature. Analysis of structural features of lignin suggests that these three organic solvent systems favorably solvate lignin, resulting in a more extended conformation suitable for catalytic conversion to valuable chemicals. We further introduce model palladium (Pd) and carbon (C) surfaces to understand how solvent choice impacts adsorption onto a representative catalytic surface and support, and to quantify the competition among the reactant and solvent molecules for the surface. Unbiased simulations suggest strong adsorption of lignin on both Pd and C surfaces at 473 K, with notable solvent-mediated differences in adsorption energies. Additionally, our findings indicate that lignin adsorption is promoted by the entropy change resulting from the displacement of solvent molecules from the surface. This study provides a molecular perspective of adsorption of lignin onto varying surfaces, which is a step towards understanding and optimizing the catalytic conversion of lignin into valuable chemicals.

adsorption↗
NASA NTRS1994

A new derivation of the tensile strength of cometary nuclei: Application to comet Shoemaker-Levy 9

The splitting of comets as exemplified by comet Shoemaker-Levy 9, when it passed near Jupiter, is a common phenomenon. Multiple splitting is also not an uncommon occurrence. It is clear that the comet nucleus is fragile, i.e., its tensile strength is small compared with that of solid materials. We show that aggregates of sub-micron interstellar dust particles presumed to consist of a silicate core, an inner mantle of complex organic refractory molecules, and an outer mantle dominated by H2O ice (Greenberg, 1982) provide the basis for a quantitative derivation of the tensile strength of comet SL9 using molecular interactions at the contact interfaces. In fact, using a mean particle size representing interstellar dust as it would appear in its final presolar state one derives a tensile strength which describes remarkably well the multiple splitting phenomenon. This derivation of the tensile strength of a particle aggregate resulting from molecular interactions is quite general and can be applied to physical situations involving any sorts of aggregates as well as those representing comet nuclei.

Greenberg, J. Mayo↗
DOE OSTI2025

Thermodynamic Framework for Water in Deep Eutectic Solvents and Ionic Liquids

Water is widely recognized as critical to the tunability and electrochemical stability of nonaqueous solvents such as deep eutectic solvents (DESs) and ionic liquids (ILs). Traditionally, the water content of these solvents has been controlled by either drying or adding small amounts of water to control their bulk properties to meet specific application requirements. The total water content by itself, does not provide sufficient information about the chemical reactivity and molecular interactions within DES– and IL–water mixtures. In this concept article, water activity is highlighted as a thermodynamically more rigorous descriptor to quantify the influence of the co‐solvent water on DES– and IL–water mixtures. Water activity relates measurable physical properties, such as vapor pressure, density, viscosity, electrochemical stability, and conductivity of DESs and ILs to the underlying molecular interactions between their components. Furthermore, water activity of DESs and ILs correlates with changes in local solvent structures and thermodynamic excess properties, including excess molar volume, enthalpy, and Gibbs energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Interaction of Molecular Hydrogen on α-Pu at 300 K: Nucleation of Hydrides and Pu-Catalyzed Carbides

An α-Pu sample was studied in its “as-received” and “sputtered” state by both X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectroscopy (ToF-SIMS). Analysis of the “as-received” surface indicated significant carbon and oxygen, with oxygen signal pertaining to plutonium dioxide (PuO 2 ) and sesquioxide (Pu 2 O 3 ). The “sputtered” clean metal surface was then dosed with hydrogen (H 2 ) gas at 300 K and found to nucleate hydride species (PuH x ). Interestingly, H 2 was observed to be critical for nucleation of carbides (Pu x C y ) by acting as a catalyst for Pu’s reaction with background gases. Because Pu metal has a high affinity for oxygen, reoxidation occurred under UHV, forming Pu x O y and disrupting both PuH x and Pu x C y growth. Observations from the experiments were modeled for the α-Pu(020) surface, illustrating the ability of H 2 to readily dissociate onto sputtered and speciated surfaces at 300 K. The projected density of states from these calculations were compared to experiments, showing good agreement between the Pu 5f, 6d, and 7s states and the H 1s, O 2p, and C 2p valence states. Overall, the above results indicated that the formed hydride layer is unstable at 300 K in UHV conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Role of Intermolecular Interactions in Deep Eutectic Solvents for CO 2 Capture: Vibrational Spectroscopy and Quantum Chemical Studies

Recent research and reviews on CO 2 capture methods, along with advancements in industry, have highlighted high costs and energy-intensive nature as the primary limitations of conventional direct air capture and storage (DACS) methods. In response to these challenges, deep eutectic solvents (DESs) have emerged as promising absorbents due to their scalability, selectivity, and lower environmental impact compared to other absorbents. However, the molecular origins of their enhanced thermal stability and selectivity for DAC applications have not been explored before. Therefore, the current study focuses on a comprehensive investigation into the molecular interactions within an alkaline DES composed of potassium hydroxide (KOH) and ethylene glycol (EG). Combining Fourier transform infrared (FT-IR) and quantum chemical calculations, the study reports structural changes and intermolecular interactions induced in EG upon addition of KOH and its implications on CO 2 capture. Experimental and computational spectroscopic studies confirm the presence of noncovalent interactions (hydrogen bonds) within both EG and the KOH-EG system and point to the aggregation of ions at higher KOH concentrations. Additionally, molecular electrostatic potential (MESP) surface analysis, natural bond orbital (NBO) analysis, quantum theory of atoms-in-molecules (QTAIM) analysis, and reduced density gradient-noncovalent interaction (RDG-NCI) plot analysis elucidate changes in polarizability, charge distribution, hydrogen bond types, noncovalent interactions, and interaction strengths, respectively. Evaluation of explicit and hybrid models assesses their effectiveness in representing intermolecular interactions. This research enhances our understanding of molecular interactions in the KOH-EG system, which are essential for both the absorption and desorption of CO 2 . The study also aids in predicting and selecting DES components, optimizing their ratios with salts, and fine-tuning the properties of similar solvents and salts for enhanced CO 2 capture efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

In situ molecular imaging of ion clusters reveals the acid gas capture capacity and mechanism of water-lean ionic liquids

Water-lean solvents are a promising technology for capturing acid gases like carbon dioxide (CO 2 ). In situ liquid time-of-flight secondary ionization mass spectroscopy (ToF-SIMS) is used to study a representative solvent N-(2-ethoxyethyl)-3-morpholinopropan-1-amine (2-EEMPA) with different CO 2 loadings to reveal the complex solvent structure upon CO 2 capture. Characteristic peaks of 2-EEMPA, such as m/z – 215 C 11 H 23 N 2 O 2 – (deprotonated 2-EEMPA) and m/z + 217 C 11 H 25 N 2 O 2 + (protonated 2-EEMPA), are detected due to acid gas uptake. Also, solvent molecules and carboxylate ion pairs, such as m/z – 259 C 12 H 23 N 2 O 4 – [(deprotonated 2-EEMPA∙∙∙CO 2 )] and m/z + 261 C 12 H 25 N 2 O 4 + (protonated 2-EEMPA∙∙∙CO 2 ), are observed. Interestingly, more than one CO 2 molecule can be captured per each solvent molecule as evidenced in SIMS mass spectra, for example, m/z – 321 C 13 H 25 N 2 O 7 – [(deprotonated 2-EEMPA)∙∙∙2CO 2 ∙∙∙H 2 O], m/z + 305 C 13 H 25 N 2 O 4 + [(protonated 2-EEMPA)∙∙∙2CO 2 ], m/z – 389 C 17 H 29 N 2 O 8 – [(deprotonated 2-EEMPA)∙∙∙3CO 2 ∙∙∙3CH 2 ], and m/z + 373 C 16 H 25 N 2 O 8 + [(protonated 2-EEMPA)∙∙∙3CO 2 ∙∙∙2C]. However, the monomer of 2-EEMPA and CO 2 seems to be most prevalent. Furthermore, solvent clusters are detected in loaded solvents, for instance m/z + 433 C 22 H 49 N 4 O 4 + [(2-EEMPA)2∙∙∙H] and m/z + 646 [(2-EEMPA) 3 -2H], while capturing CO 2 at different amounts. Relative abundance of cluster ions provides a semi-qualitative venue to assess the free energies of gas capture energetics, indicating the relative stability trend within the same solvent system, previously impossible. These observed ion clusters are verified with molecular modeling, where dimer, trimer, and cluster ions are validated for their presence either due to weak molecular interactions or hydrogen bonds. In situ molecular imaging of ionic liquids and molecular modeling reveals that the acid gas capture mechanism by ionic liquids includes both physical adsorption and chemical bonding with multiple reaction pathways, engaging cluster formation and alteration of solvent structures.

Acid gas capture↗
DOE OSTI2026

Desorption Electrospray Ionization–Mass Spectrometry Imaging Provides Spatiochemical Information on Potential Biocontrol Agents against Phytophthora capsici Infection in Tomato Plants

Biological control agents can offer an eco-friendly and more sustainable alternative to conventional chemical pesticides, providing protection against destructive pathogens, such as Phytophthora capsici, while reducing potential environmental harm associated with synthetic pesticide use in agricultural systems. This work evaluates the biocontrol effectiveness of Bacillus vallismortis, Bacillus amyloliquefaciens, Bacillus thuringiensis, and Bacillus subtilis, against the widespread plant pathogen Phytophthora capsici. Our studies showed that Bacillus thuringiensis and Bacillus subtilis promote plant growth and provide protection against Phytophthora capsici in both in vitro and in vivo greenhouse studies, while Bacillus vallismortis and Bacillus amyloliquefaciens were effective in vitro but not in vivo. Specifically, Bacillus thuringiensis was observed to both hinder the growth of Phytophthora capsici and enhance plant resilience to this pathogen, with B. thuringiensis-treated, pathogen-exposed plants displaying a 94.4% increase in root length and a 74.0% increase in shoot height compared to plants with only oomycete exposure. To probe the molecular interactions between the biocontrol agent and pathogen, a dual culture of Bacillus thuringiensis and Phytophthora capsici was analyzed in situ using a desorption electrospray ionization–mass spectrometry imaging (DESI-MSI) workflow. This approach interrogated the spatially oriented biochemical interactions that may serve as the molecular foundation for the effectiveness of these biological control agents in crop protection, identifying seven unique phenotypic regions within the dual culture. Herein, we demonstrate the benefits of biological control agent application in tomato cultivation and showcase the strengths of desorption electrospray ionization–mass spectrometry imaging when applied to the spatially resolved molecular characterization of agriculturally relevant microorganisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Elucidating molecular level interfacial interactions between a de novo protein and nucleated calcite with solid-state NMR

Biomineralization is the process by which organisms use biomolecules to produce hierarchically structured organic–inorganic composites. Using biology as inspiration, a protein construct (FD31) was previously designed to accelerate formation of nano-calcite with an unconventional {110} face. Here, to understand the molecular interactions essential for protein aided calcite nucleation, solid-state nuclear magnetic resonance (ssNMR) spectroscopy was used in this work to characterize the FD31–calcite interface at the atomic level. Glutamic acid side chains designed to interact directly with calcium ions on the surface were found to have dynamics on the sub-millisecond timescale, indicating possible interactions between the protein and surface waters that were not included in the original model. Dipolar ssNMR recoupling techniques also showed that the protein backbone is ∼2 Å closer to the surface than in the original docking model. Refined molecular simulations were done in the presence of explicit waters, which resulted in the protein backbone closer to the surface than in the original docking structure, providing better agreement with experiment and highlighting the important role played by water in FD31–calcite interactions. While this work provides the first experimental confirmation that FD31 interactions with calcite are localized to the surface of the protein designed to serve as a template, these studies do indicate a more dynamic binding and closer binding mode between FD31 and the nucleated surface than originally proposed. In all, this enhanced molecular insight into the FD31–calcite interface has advanced our fundamental understanding of the atomic interactions at the organic–inorganic interface and will aid in the design of biological templates for the nucleation of inorganic crystals.

Close, Emily G. S. [Pacific Northwest National Lab↗
DOE OSTI2025

DataSet for Elucidating molecular level interfacial interactions between a de novo protein and nucleated calcite with solid-state NMR

Biomineralization is the process by which organisms use biomolecules to produce hierarchically structured organic-inorganic composites. Using biology as inspiration, a protein construct (FD31) was previously designed to accelerate formation of nano-calcite with an unconventional {110} face. To understand the molecular interactions essential for protein aided calcite nucleation, solid-state nuclear magnetic resonance (ssNMR) spectroscopy was used in this work to characterize the FD31-calcite interface at the atomic level. Glutamic acid side chains designed to interact directly with calcium ions on the surface were found to have dynamics on the sub-millisecond timescale, indicating possible interactions between the protein and surface waters that were not included in the original model. Dipolar ssNMR recoupling techniques also showed that the protein backbone is ~2 Å closer to the surface than in the original docking model. Refined molecular simulations were done in the presence of explicit waters, which resulted in the protein backbone closer to the surface than in the original docking structure, providing better agreement with experiment and highlighting the important role played by water in FD31-calcite interactions. These studies provide the first experimental evidence to confirm that FD31 interactions with calcite are localized to the surface of the protein designed to serve as a template. However, these studies do indicate a more dynamic binding and closer binding mode between FD31 and the nucleated surface than originally proposed. In all, this enhanced molecular insight into the FD31-calcite interface has advanced our fundamental understanding of the atomic interactions at the organic-inorganic interface and will aid in the design of biological templates for the nucleation of inorganic crystals.

Saccuzzo Close, Emily Grace [Pacific Northwest Nat↗
DOE OSTI2024

Molecular origin of viscoelasticity and influence of methylation in mesophase pitch

The viscoelastic and thermomechanical properties of pitches are responsible for their melt-spinning behavior, which is a critical step for manufacturing high-performance pitch-based carbon fibers. Here, we systematically explore the impact of methyl group modifications on the viscoelastic and thermal properties of mesophase pitches. We employ a range of atomistic modeling approaches, including Density Functional Theory (DFT), Density Functional Tight Binding (DFTB), and Classical Molecular Mechanics (MM), to provide detailed insights into the molecular interactions and structural changes. Further, our results revealed the molecular mechanisms that promote layered structures leading to the anisotropic nature of the viscoelastic behavior of mesophase pitch. Furthermore, we propose a modified molecular representation of naphthalene-based mesophase pitch based on the analysis of x-ray diffraction measurements. This study provides fundamental insights into the molecular structures of mesophase pitch and the role of methyl groups controlling its viscosity, which offer valuable insights into mesophase-based carbon fiber production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗