Search NASA⌕ Search

SEARCH · Search NASA

Results for “Magnetic Field Measurements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

The CMS Magnetic Field Measuring and Monitoring Systems

This review article describes the performance of the magnetic field measuring and monitoring systems for the Compact Muon Solenoid (CMS) detector. To cross-check the magnetic flux distribution obtained with the CMS magnet model, four systems for measuring the magnetic flux density in the detector volume were used. The magnetic induction inside the 6 m diameter superconducting solenoid was measured and is currently monitored by four nuclear magnetic resonance (NMR) probes installed using special tubes outside the barrel hadron calorimeter. Two more NRM probes were installed at the faces of the tracking system. The field inside the superconducting solenoid was precisely measured in 2006 in a cylindrical volume of 3.448 m in diameter and 7 m in length using 10 three-dimensional (3D) B-sensors based on the Hall effect. These B-sensors were installed on each of the two propeller arms of an automated field-mapping machine. In addition to these measurement systems, a system for monitoring the magnetic field during the CMS detector operation has been developed. Inside the solenoid in the horizontal plane, 4 3D B-sensors were installed at the faces of the tracking detector. Twelve 3D B-sensors were installed on the surfaces of the flux-return yoke nose disks. Seventy 3D B-sensors were installed in the air gaps of the CMS magnet yoke. A specially developed flux loop technique was used for the most complex measurements of the magnetic flux density inside the steel blocks of the CMS magnet yoke. The flux loops are installed in 22 sections of the flux-return yoke blocks. The areas enclosed by these coils varied from 0.3 to 1.59 m$^{2}$ in the blocks of the barrel wheels and from 0.5 to 1.12 m$^{2}$ in the blocks of the yoke endcap disks. The development of these systems and the results of the magnetic flux density measurements across the CMS magnet are presented and discussed in this review article.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1985

The Hanle effect applied to magnetic field measurements

The Hanle effect is the modification by a local magnetic field of the polarization due to coherent scattering in spectral lines. It results from the precession of a classical oscillator about the magnetic field direction. The sophisticated quantum-mechanical treatment, which is required to compute the polarization parameters of scattered light, was developed. The main features of the Hanle effect concerning magnetic field measurements are: (1) a good sensitivity within the approximate range 0.1 B gamma rho to 10 B gamma rho where B gamma rho is the field strength yielding a Larmor period equal to the radiative lifetime, (2) there is no Hanle effect for field vectors parallel to the excitating beam, (3) the Hanle effect refers essentially to the linear polarization in a spectral line, (4) various points in the line profile are affected in the same way by change of linear polarization so that polarization parameters can be measured on the integrated line profile.

Leroy, J. L.↗
DOE OSTI2021

Magnetic Field Measurements of First Pre-series Full -Length 4.2 m Quadrupole MQXFA03 Using PCB Rotating Coils for the Hi Hi-Lumi LHC Project

The U.S. Hi-Lumi LHC Accelerator Upgrade Project (AUP) and CERN have joined efforts to develop high field quad-rupoles for the Hi-Lumi LHC upgrade. The US national laborato-ries in the AUP project will deliver 10 magnets and each cryostat has two 4.2 m high gradient quadrupoles in it. These magnets are made of Nb3Sn conductors, with large aperture (150 mm) and in-tegrated gradient of 556.9 T. This paper reports on magnetic measurements performed during the vertical test at Brookhaven National Laboratory (BNL) in 2019-2020. A warm measurement Z-Scan (+/- 15 A) with 42 Z-positions before cool-down was per-formed at BNL. The results were directly compared to field data measured at LBNL during magnet assembly. Measured harmonics and magnetic center offsets (ΔX and ΔY) have provided timely and informative diagnostics on the magnet structure’s shape at both warm and cold temperatures. A new centering fixture was de-signed and added to better center the warm bore tube which con-tains the rotating coil probe. After the quench training to 16.47 kA was achieved, a complete set of cold measurements (Z-Scan at 16.47 kA and I-Scan from 960 A to 16.47 kA and back to 960 A) was made. Periodic axial variation of allowed and nonallowed harmonics was observed which is related to the coil radial and/or mid-plane variations along the magnet axis. Overall, the average harmonics in the straight section are within the required field boundaries.

43 PARTICLE ACCELERATORS↗
NASA NTRS1974

Pioneer Solar Plasma and Magnetic Field Measurements in Interplanetary Space During August 2-17, 1972

Solar wind plasma and magnetic field measurements from Pioneers 9 and 10 during August 2-17, 1972, reveal complex and large-amplitude variations on a one-hour time scale and numerous discontinuities. During this time period an approximate radial alignment of the two spacecraft as seen from the Sun occurred with heliocentric distances of 0.8 AU for Pioneer 9 and 2.2 AU for Pioneer 10, both at 45 deg east of the Earth's solar longitude. The peak hourly average solar wind proton bulk velocity measured at Pioneer 9 was 990 km sec (exp -1) during hour 0 UT of August 5. The peak hourly average proton number density was 62 cm (exp -3) during hour 11 UT of August 3. The peak solar wind speeds are generally much reduced at Pioneer 10 compared with those observes at Pioneer 9. The peak 30 minute average magnetic field magnitude was 85 gamma during 1245 - 1315 UT of August 3. The Pioneer 9 data indicate passage of four fast forward interplanetary shocks, and one slow forward interplanetary shock.

Mihalov, J. D.↗
NASA NTRS1976

Venera-9 magnetic field measurements in the Venus wake - Evidence for an earth-like interaction

Venera-9 magnetic field measurements in the Venus wake provide additional support for the hypothesis that Venus has an intrinsic planetary field. The observed field is in the direction expected for a northward moment, and is similar to that observed in equivalent locations in the terrestrial magnetosphere, both in its temporal and spatial behavior. In particular, Venera-9 appears to have observed a plasma sheet expansion, field-aligned currents, and tail-field dipolarization.

Russell, C. T.↗
NASA NTRS1972

Imp 5 magnetic-field measurements in the high-latitude outer magnetosphere near the noon meridian.

Results of Imp 5 magnetic-field measurements at geomagnetic latitudes up to 75 deg and at distances beyond six earth radii, revealing the permanent existence of a broad depressed field region centered on the polar or dayside cusp. Field strengths at seven earth radii on cusp field lines that connect to the earth are typically only 50 to 70% of that of an undistorted dipole field. The transition region between the magnetosheath and the point where the fields are clearly of dipolar origin is characterized by large-amplitude fluctuations and the lack of a clear magnetopause boundary. Magnetic-field perturbations are observed in the cusp region with magnitudes up to 45 gamma and in directions that are approximately perpendicular to the average field. These perturbations are suggestive of field-aligned currents, and their magnitudes are consistent with the low-altitude measurements obtained on polar-orbiting spacecraft.

Fairfield, D. H.↗
NASA NTRS1972

Reply to a paper on the use of two magnetometers for magnetic field measurements on a spacecraft

The use of two magnetometers for measuring the ambient magnetic field of spacecraft is compared with the single magnetometer variance method. It is shown that the dual magnetometer concept was developed for missions which are conducted with attitude stabilized spacecraft which have been constructed without an adequate magnetics control program. Specific methods for applying the dual magnetometer technique are described and an error analysis is conducted to determine the accuracy of the results.

Ness, N. F.↗
NASA NTRS2010

Magnetic Field Measurement on the C/NOFS Satellite: Geomagnetic Storm Effects in the Low Latitude Ionosphere

The Vector Electric Field Investigation (VEFI) suite onboard the Communications/Navigation Outage Forecasting System (C/NOFS) spacecraft includes a sensitive fluxgate magnetometer to measure DC and ULF magnetic fields in the low latitude ionosphere. The instrument includes a DC vector measurement at 1 sample/sec with a range of +/- 45,000 nT whose primary objective is to provide direct measurements of both V x B and E x B that are more accurate than those obtained using a simple magnetic field model. These data can also be used for scientific research to provide information of large-scale ionospheric and magnetospheric current systems, which, when analyzed in conjunction with the C/NOFS DC electric field measurements, promise to advance our understanding of the electrodynamics of the low latitude ionosphere. In this study, we use the magnetic field data to study the temporal and local time variations of the ring currents during geomagnetic storms. We first compare the in situ measurements with the POMME (the POtsdam Magnetic Model of the Earth) model in order to provide an in-flight "calibration" of the data as well as compute magnetic field residuals essential for revealing large scale external current systems. We then compare the magnetic field residuals observed both during quiet times and during geomagnetic storms at the same geographic locations to deduce the magnetic field signatures of the ring current. As will be shown, the low inclination of the C/NOFS satellite provides a unique opportunity to study the evolution of the ring current as a function of local time, which is particularly insightful during periods of magnetic storms. This paper will present the initial results of this study.

Le, Guan↗
DOE OSTI2021

Measuring magnetic fields in laser-driven coils with dual-axis proton deflectometry

Abstract By driving hot electrons between two metal plates connected by a wire loop, high power lasers can generate multi-tesla, quasi-static magnetic fields in miniature coil targets. Many experiments involving laser-coil targets rely on proton deflectometry directed perpendicular to the coil axis to extract a measurement of the magnetic field. In this paper, we show that quantitative measurements using perpendicular probing are complicated by the presence of GV m −1 electric fields in the target that develop on sub-ns timescales. Probing parallel to the coil axis with fiducial grids is shown to reliably separate the electric and magnetic field measurements, giving current estimates of I ≈ 5 kA in 1 mm- and 2 mm-diameter wire loops. An analytic model of proton deflection in electric and magnetic fields is used to benchmark results from the particle-in-cell code and help deconvolve the magnetic and electric field deflections. Results are used to motivate a new experimental scheme that combines a single-plate target with axial proton probing and direct current measurements. This scheme has several important advantages over the traditional target and diagnostic set-up, enabling the robust measurement of coil magnetic fields and plasma properties, as well as making it easier to validate different theoretical models at a range of laser intensities.

Bradford, P. (ORCID:0000000296186342)↗