Limitations in knowledge of the thermodynamic properties of the Martian atmosphere
Thermodynamic properties of Martian atmosphere with respect to vertical profiles of composition, temperature, number density, and pressure
Youngblood, W. W.↗
SEARCH · Search NASA
Results for “Martian atmospheric”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Isolated Rotor Forward Flight Testing at Martian Atmospheric Density Data Report
With the recent interest in Martian exploration using Unmanned Aerial Vehicles (UAVs), an experimental study was conducted to investigate rotor performance at Martian atmospheric conditions. Both simulation and testing of rotors is vital for evaluating rotor performance and behavior, especially for operations at Martian atmospheric densities and pressures. One critical test that has not been performed to date is helicopter forward flight testing at Martian atmospheric densities. To achieve this, a test was conducted in a tunnel facility that could be evacuated to the atmospheric pressure and density of Mars. A 40-inch-diameter rotor, roughly approximating the scale of the proposed Mars Helicopter (MH) design by the NASA Jet Propulsion Laboratory (JPL), was tested in forward flight at Mars’ atmospheric pressure at the NASA Ames Planetary Aeolian Laboratory (PAL). In this forward flight testing, the drive system of the Martian Surface Wind Tunnel (MARSWIT) was never turned on; all wind speeds read were generated either through the rotor spinning or from facility effects. The goal of this experiment was to collect rotor thrust, rotational speed, power, torque, and acoustics measurements. Subsequently, these results can be used for correlation with simulated cases using a mid-fidelity Computational Fluid Dynamics (CFD) simulation. As expected, rotor thrust and power are drastically reduced at air densities 100 times lower than at sea level on Earth. In addition, Reynolds number effects seem to play a vital role at reduced pressure that cannot be neglected in the simulation.
One Atmosphere↗
An efficient and accurate technique to compute the absorption, emission, and transmission of radiation by the Martian atmosphere
CO2 comprises 95 pct. of the composition of the Martian atmosphere. However, the Martian atmosphere also has a high aerosol content. Dust particles vary from less than 0.2 to greater than 3.0. CO2 is an active absorber and emitter in near IR and IR wavelengths; the near IR absorption bands of CO2 provide significant heating of the atmosphere, and the 15 micron band provides rapid cooling. Including both CO2 and aerosol radiative transfer simultaneously in a model is difficult. Aerosol radiative transfer requires a multiple scattering code, while CO2 radiative transfer must deal with complex wavelength structure. As an alternative to the pure atmosphere treatment in most models which causes inaccuracies, a treatment was developed called the exponential sum or k distribution approximation. The chief advantage of the exponential sum approach is that the integration over k space of f(k) can be computed more quickly than the integration of k sub upsilon over frequency. The exponential sum approach is superior to the photon path distribution and emissivity techniques for dusty conditions. This study was the first application of the exponential sum approach to Martian conditions.
Lindner, Bernhard Lee↗
Computation of thermo-chemical nonequilibrium Martian atmospheric entry flows
The aerothermodynamics of a Martian atmospheric entry trajectory are studied. A chemical kinetics model for the CO2-N2 mixture found in the Martian atmosphere is implemented in a two-dimensional computational fluid dynamics method. The gas mixture is allowed to be in thermo-chemical nonequilibrium and to be composed of eight species characterized by two temperatures. The CO2 reaction model is validated by comparing computations to experimental results. Results for typical Martian entry conditions are presented and limitations of the current thermophysical model are discussed.
Candler, Graham V.↗
Ground Based Observation of Isotopic Oxygen in the Martian Atmosphere Using Infrared Heterodyne Spectroscopy
Infrared heterodyne spectra of isotopic CO2 in the Martian atmosphere were obtained using the Goddard Heterodyne Instrument for Planetary Wind and Composition, HIPWAC, which was interfaced with the 3-meter telescope at the NASA Infrared Telescope Facility- Spectra were colle cted at a resolution of lambda/delta lambda=10(exp 7). Absorption fea tures of the CO2 isotopologues have been identified from which isotop ic ratios of oxygen have been determined. The isotopic ratios O-17/O -16 and O-18/O-16 in the Martian atmosphere can be related to Martian atmospheric evolution and can be compared to isotopic ratios of oxyg en in the Earth's atmosphere. Isotopic carbon and oxygen are importa nt constraints on any theory for the erosion of the Martian primordia l atmosphere and the interaction between the atmosphere and surface o r subsurface chemical reservoirs. This investigation explored the pr esent abundance of the stable isotopes of oxygen in Mars' atmospheric carbon dioxide by measuring rovibrational line absorption in isotop ic species of CO2 using groundbased infrared heterodyne spectroscopy in the vicinity of the 9.6 micron and 10.6 micron CO2 lasing bands. T he target transitions during this observation were O-18 C-12 O-16 as well as O-178 C-12 O-16 and O-16 C-113 O-16 at higher resolving power of lambda/delta lambda=10(exp 7) and with high signal-to-noise ratio (longer integration time) in order to fully characterize the absorpt ion line profiles. The fully-resolved lineshape of both the strong n ormal-isotope and the weak isotopic CO2 lines were measured simultane ously in a single spectrum.
Smith, R. L.↗
Forward Flight Rotor Performance at Martian Atmospheric Densities and Sensitivity to Low Reynolds Numbers
Much effort has been made to enhance exploration on Mars. In addition to a rover and Mars-orbiting satellites, a Mars Helicopter Technology Demonstrator was proposed by the NASA Jet Propulsion Laboratory (JPL) to augment planetary research for the Mars 2020 Mission. Understanding rotor performance is vital for operations at Martian atmospheric conditions. The work presented is a study investigating rotor performance at Martian atmospheric conditions. Forward flight rotor tests were conducted in the Planetary Aeolian Laboratory (PAL) at NASA Ames Research Center, which has the capability to evacuate the air in the chamber to reach Martian atmospheric densities. A 1-meter-diameter rotor, roughly approximating the Mars Helicopter Technology Demonstrator, was tested at multiple atmospheric densities, including that of Mars. Rotor rotational speed, thrust, torque, power, and airspeed measurements were collected during the test. These results were then correlated with simulated cases using a mid-fidelity computational fluid dynamics software, Rotorcraft CFD (RotCFD). C81Generator (C81Gen) was used to generate airfoil aerodynamic coefficient for the spanwise locations along the rotor. To observe the differences between the C81Gen flow type modes at low Reynolds number, the simulations at Martian atmospheric densities were run under the “fully turbulent”, and the fully laminar flow type. In addition, Reynolds number effects (within 2x104 to 9x104) on experimental thrust coefficient, power coefficient, and figure of merit were analyzed. Within this chord- based Reynolds number range, CT and FM decreased around 26% and 36%, respectively, while CP remained fairly constant, exhibiting variations of no more than 5.5%. Despite the challenges involved in testing at a large difference of atmospheric ensities between Earth and Mars, repeatable data was obtained in all the measurements at Martian atmospheric conditions.
Perez Perez, Brenda NAtalia↗
Meteoric Magnesium Ions in the Martian Atmosphere
From a thorough modeling of the altitude profile of meteoritic ionization in the Martian atmosphere we deduce that a persistent layer of magnesium ions should exist around an altitude of 70 km. Based on current estimates of the meteoroid mass flux density, a peak ion density of about 10(exp 4) ions/cm is predicted. Allowing for the uncertainties in all of the model parameters, this value is probably within an order of magnitude of the correct density. Of these parameters, the peak density is most sensitive to the meteoroid mass flux density which directly determines the ablated line density into a source function for Mg. Unlike the terrestrial case, where the metallic ion production is dominated by charge-exchange of the deposited neutral Mg with the ambient ions, Mg+ in the Martian atmosphere is produced predominantly by photoionization. The low ultraviolet absorption of the Martian atmosphere makes Mars an excellent laboratory in which to study meteoric ablation. Resonance lines not seen in the spectra of terrestrial meteors may be visible to a surface observatory in the Martian highlands.
Pesnell, William Dean↗
The vertical temperature distribution in the Martian atmosphere.
Vertical temperature distribution in Martian atmosphere, noting insensitivity to surface pressure and carbon dioxide variations
VERTICAL DISTRIBUTION↗
Carbon monoxide in the Martian atmosphere.
Carbon monoxide presence in Martian atmosphere from Mars line spectra, giving content, surface pressure and concentration
Connes, J.↗
The model of the composition of the Martian atmosphere
Global mean distributions of Martian atmospheric components concentrations from the planet's surface up to an altitude of 250 km are calculated. Improved data on the turbulent mixing coefficient, as a function of altitude, on temperature distribution and on chemical and photochemical reaction rates are used. The model data agree well with available measurements of some components concentrations. Variations of composition due to long-period variations of temperature, moisture and turbulent mixing are investigated. The relative significance of different catalytic cycles and the important role of excited atoms 0 (d-1) are revealed.
Izakov, M. N.↗
Diagnostic calculations of the circulation in the Martian atmosphere
The circulation of the martian atmosphere during late southern summer is inferred from observed atmospheric temperature and dust distributions. We use global maps of temperature and dust optical depth (approximately 0-60 km) retrieved from a subset of the Mariner 9 IRIS thermal emission spectra spanning L(sub s) equals 343-348 deg. This thermal structure is characterized by a reversed meridional temperature gradient at altitudes above about 40 km, and temperatures that decrease from equator to pole at lower altitudes. Zonal-mean zonal winds are derived from the zonally averaged temperatures assuming gradient wind balance and midlatitude westerly jets with velocities of 80-90 m s(exp -1) near 50 km; in the southern tropics the winds are easterly with velocities of 40 m s(exp -1) near 50 km. The north-south atmospheric transport includes contributions from both the zonal mean meridional circulation and large-scale waves.
Santee, Michelle↗
Fractionated martian atmosphere in the nakhlites?
Considerable evidence points to a martian origin of the shergottite-nakhlite-chassignite (SNC) meteorites. Noble gas isotopic compositions have been measured in most SNC meteorites. The Xe-129/Xe-132 vs. Kr-84/Xe-132 ratios in Chassigny, most shergottites, and lithology C of EETA 79001 define a linear array. This array is thought to be a mixing line between martian mantle and martian atmosphere. One of the SNC meteorites, Nakhla, contains a leachable component that has an elevated Xe-129/Xe-132 ratio relative to its Kr-84/Xe-132 ratio when compared to this approximately linear array. The leachable component probably consists in part of iddingsite, an alteration product produced by interaction of olivine with aqueous fluid at temperatures lower than 150 C. The elevated Xe isotopic ratio may represent a distinct reservoir in the martian crust or mantle. More plausibly, it is elementally fractionated martian atmosphere. Formation of sediments fractionates the noble gases in the correct direction. The range of sediment/atmosphere fractionation factors is consistent with the elevated Xe-129/Xe-132 component in Nakhla being contained in iddingsite, a low temperature weathering product. The crystallization age of Nakhla is 1.3 Ga. Its low-shock state suggests that it was ejected from near the surface of Mars. As liquid water is required for the formation of iddingsite, these observations provide further evidence for the near surface existence of aqueous fluids on Mars more recently than 1.3 Ga.
Drake, Michael J.↗
Martian Atmospheric Modeling of Scale Factors for MarsGRAM 2005 and the MAVEN Project
For spacecraft missions to Mars, especially the navigation of Martian orbiters and landers, an extensive knowledge of the Martian atmosphere is extremely important. The generally-accepted NASA standard for modeling (MarsGRAM), which was developed at Marshall Space Flight Center. MarsGRAM is useful for task such as aerobraking, performance analysis and operations planning for aerobraking, entry descent and landing, and aerocapture. Unfortunately, the densities for the Martian atmosphere in MarsGRAM are based on table look-up and not on an analytical algorithm. Also, these values can vary drastically from the densities actually experienced by the spacecraft. This does not have much of an impact on simple integrations but drastically affects its usefulness in other applications, especially those in navigation. For example, the navigation team for the Mars Atmosphere Volatile Environment (MAVEN) Project uses MarsGRAM to target the desired atmospheric density for the orbiter's pariapse passage, its closet approach to the planet. After the satellite's passage through pariapsis the computed density is compared to the MarsGRAM model and a scale factor is assigned to the model to account for the difference. Therefore, large variations in the atmosphere from the model can cause unexpected deviations from the spacecraft's planned trajectory. In order to account for this, an analytic stochastic model of the scale factor's behavior is desired. The development of this model will allow for the MAVEN navigation team to determine the probability of various Martian atmospheric variations and their effects on the spacecraft.
Martian atmosphere↗
Dust transport in the Martian atmosphere
Dust in suspension within the martian atmosphere is an important driver of the atmospheric thermal and, ultimately, dynamical states. By virtue of its presence in the atmosphere, this suspended dust is susceptible to transport by the winds and thus the location from which dust is lifted from the surface is not necessarily the location at which it will return to the surface. Such surface dust lifting and subsequent transport, when accumulated over daily, seasonal and annual time intervals define the martian dust cycle. The atmospheric transport element (and equally surface lifting and redeposition) of this cycle is strongly dependent upon season and the quantity of dust in suspension. The seasonal dependence arises due to the dominance of particular components of the atmospheric circulation at particular locations (latitudes) at various times through the year. The dependence on dust abundance is due to the amount of dust available for transport, but it is also due to the influence that the dust has on the intensity of the circulation. As dust abundance and therefore its radiative influence increases, some components of the circulation intensity (Hadley circulation, thermal tides), while some components may decline in intensity (baroclinic waves, condensation flow). For these reasons, our ability to understand the martian dust cycle is dependent on our ability to define the contributions that various circulation components, under varying seasonal and dust-radiative forcings, play in the transport of dust around the planet.
Murphy, James R.↗
Boundary Layer Stability and Transition in a Chemically Reacting Martian Atmosphere using LASTRAC
The Thermal Protection System (TPS) is a significant portion of the mass of reentry vehicles, planetary probes, and Martian entry vehicles. Reducing this mass has benefits in terms of decreased fuel requirements and increased payload; however, due to the high risk and un-certainty, the TPS or heat shields are designed conservatively by assuming fully turbulent flow. Laminar flow results in reduced heat flux, and improved transition prediction has the potential to reduce TPS mass and uncertainty in aerothermodynamic predictions. Limited previous research exists examining the problem of transition prediction for Martian atmospheric entry, with studies available on transition on the Mars Science Laboratory TPS. Although transition was demonstrated in wind-tunnel tests, uncertainty in the transition location resulted in a TPS designed for fully turbulent flow, and therefore greater mass than required for a partially-laminar condition. In this work, we extend the boundary layer stability code LASTRAC, recently modified to include chemical and thermal nonequilibrium capabilities, to a model of the Martian atmosphere. LASTRAC provides Parabolized Stability Equations (PSE) as well as Linear Stability Theory (LST) to predict the stability of a boundary layer and transition with semi-empirical eN methods. Results included in this work compare disturbance growth characteristics between air and Martian atmosphere at similar nondimensional freestream conditions on a simple flat plate geometry. Both chemical nonequilibrium and thermochemical nonequilibrium, as well as both PSE and LST, are used.
Heather L Kline↗
Boundary Layer Stability and Transition in a Chemically Reacting Martian Atmosphere Using LASTRAC
The Thermal Protection System (TPS) is a significant portion of the mass of reentry vehicles, planetary probes, and Martian entry vehicles. Reducing this mass has benefits in terms of decreased fuel requirements and increased payload; however, due to the high risk and uncertainty, the TPS or heat shields are designed conservatively by assuming fully turbulent flow. Laminar flow results in reduced heat flux, and improved transition prediction has the potential to reduce TPS mass and uncertainty in aerothermodynamic predictions. Limited previous research exists examining the problem of transition prediction for Martian atmospheric entry, with studies available on transition on the Mars Science Laboratory TPS. Although transition was demonstrated in wind-tunnel tests, uncertainty in the transition location resulted in a TPS designed for fully turbulent flow, and therefore greater mass than required for a partially laminar condition. In this work, we extend the boundary layer stability code LASTRAC, recently modified to include chemical and thermal nonequilibrium capabilities, to a model of the Martian atmosphere. LASTRAC provides Parabolized Stability Equations (PSE) as well as Linear Stability Theory (LST) to predict the stability of a boundary layer and transition with semi-empirical e(sup N) methods. Results included in this work compare disturbance growth characteristics between air and Martian atmosphere at similar non-dimensional freestream conditions on a simple flat plate geometry. Both chemical nonequilibrium and thermochemical nonequilibrium, as well as both PSE and LST, are used.
Kline, H. L.↗
Compression of Martian atmosphere for production of oxygen
The compression of CO2 from the Martian atmosphere for production of O2 via an electrochemical cell is addressed. Design specifications call for an oxygen production rate of 10 kg per day and for compression of 50 times that mass of CO2. Those specifications require a compression rate of over 770 cfm at standard Martian temperature and pressure (SMTP). Much of the CO2 being compressed represents waste, unless it can be recycled. Recycling can reduce the volume of gas that must be compressed to 40 cfm at SMTP. That volume reduction represents significant mass savings in the compressor, heating equipment, filters, and energy source. Successful recycle of the gas requires separation of CO (produced in the electrochemical cell) from CO2, N2, and Ar found in the Martian atmosphere. That aspect was the focus of this work.
Lynch, D. C.↗
Argon in the Martian atmosphere
Heretofore undetected argon may be a significant constituent of the Martian atmosphere with a partial pressure of 1.8 mbar. The addition of argon to the 5.5 plus or minus 0.8 mbar of CO2, deduced from ground-based spectroscopy, is consistent with the values of total pressure deduced from the Mariner radio occulation measurements. The presence of argon in the Martian atmosphere contributes to the cooling of the upper thermosphere and exosphere and may explain the difference between predicted and observed temperatures. The argon concentrations predicted here may be related to the recent observation of several tens of per cent of an inert gas, deduced from Mars-6 data.
Levine, J. S.↗