Search NASA⌕ Search

SEARCH · Search NASA

Results for “Material flow analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Circular economy pathways for decarbonizing aluminum and steel automotive body sheet components in the United States

Decarbonizing vehicle production is essential to reducing automotive sector emissions. This study quantifies greenhouse gas (GHG) emissions from aluminum and steel auto-body sheet components produced in the US. It evaluates the effectiveness of circular economy (CE) strategies (greater closed-loop recycling of pre-consumer scrap, post-consumer scrap, and increased manufacturing yields) to reduce supply chain emissions across different process technology and electricity grid decarbonization pathways. We combine dynamic material flow analysis (2025–2050) with cradle-to-gate life-cycle modeling to assess production emissions and the potential reductions associated with the CE strategies under frozen, moderate, and aggressive technology and grid decarbonization scenarios. Current emissions intensities are estimated at approximately 12.3 kg.CO₂eq/kg of aluminum and 4.3 kg.CO₂eq/kg of steel sheet embedded in the vehicle. Under the frozen decarbonization scenario and current levels of circularity, annual emissions attributable to US aluminum and steel auto-body sheet supply chains could rise by 54 % and 18 % respectively by 2050. Rapid deployment of the CE strategies can cut these annual emissions in 2050 by 52 % for aluminum and 44 % for steel. However, scrap quality constraints lead to saturation points, limiting these benefits unless addressed. Aggressive deployment of low-carbon production technologies and a low-carbon grid reduces the relative benefit of implementing the CE strategies; however, even under the aggressive technology and grid decarbonization scenario, the CE strategies reduce annual emissions by a further 23 %-54 % by 2050. These findings highlight the urgent need to integrate CE strategies into the sheet metal supply chain to support decarbonization efforts and help meet climate targets.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Mapping the end-of-life of chemicals for circular economy opportunities

Material flow analysis of chemicals in the United States highlights low recycling rates, substantial climate change and human health impacts, and the potential for a circular economy to reduce waste and drive sustainability in the chemical industry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

4P (Plastic Parallel Pathways Platform) [SWR 23-84]

The Plastic Parallel Pathways Platform (4P) combines life cycle assessment, agent-based modeling within a dynamic material flow analysis structure to compute the environmental impacts of different recycling options under various behavioral interventions.

Walzberg, Julien↗
DOE OSTI2023

Supply Chain Energy and Greenhouse Gas Analysis Using the Materials Flows through Industry (MFI) Tool: Examination of Decarbonization Technology Scenarios for the U.S. Glass Manufacturing Sector

Glass manufacturing is a major part of the U.S. economy, and glass products in multiple sectors - flat glass, container glass, and fiberglass - are a part of everyday life. Despite glass manufacturing's long history, there are still many opportunities for glass production to improve in terms of both in overall energy consumption and greenhouse gas (GHG) emission reduction. Scenarios for the flat, container, and fiberglass sectors show the effect that each improvement has on primary energy demand and GHG emissions, starting from an industry baseline that reflects current manufacturing practices. Using the National Renewable Energy Laboratory's Material Flows through Industry tool, multiple scenarios are examined for each glass sector by applying a combination of energy reduction, increased electrification, hydrogen cofiring, a more renewable electric grid, and increased use of cullet. Additional decarbonization options are possible for glass but are left for later analysis due to cost, feasibility, or data issues. Primary energy demand can be reduced by 75%-83% compared to baseline inputs, depending on the sector, and GHG emissions are reduced by 82%-86%. Applying the maximum level of improvements listed here has the potential to save over 300 million GJ and 25 million metric tons of GHGs by 2050.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Supply Chain Energy and Greenhouse Gas Analysis Using the Materials Flows Through Industry (MFI) Tool: Examination of Alternative Technology Scenarios for the U.S. Chemical Sector

Chemical manufacturing is a large and diverse sector of the U.S. economy, with products, fuels, and a wide assortment of materials used daily by both the public and businesses. Currently, several of the largest volume chemicals produced in the United States rely on fossil fuels as a feedstock, energy source, or both. The list of chemicals includes steam cracking products such as ethylene, propylene, benzene, and xylenes as well as products such as ammonia and methanol. The focus for this work is on platform chemicals that are both produced in the largest volume and have a high potential for subsequent processing into more specialized products. In this study, we explore several new pathways that reduce the overall energy consumption and greenhouse gas (GHG) emissions for each product. These pathways include energy efficiency measures applied to existing production methods, the use of bio‐based fuels and/or feedstocks as new production methods, and electrification of high‐energy‐input stages within current production methods. Scenarios for energy demand and GHG reduction were conducted with the National Renewable Energy Laboratory's Materials Flows through Industry tool. Projections of the energy demand and GHG emissions in 2030 and 2050 are included, using grid composition projections from the NREL ReEDS model. The alternative scenarios selected showcase the effect of realistic changes the industry could make, focusing on technologies with a high level of technical readiness.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Dual-scale folding in cutting of commercially pure aluminum alloys

We examine a, hitherto, little-studied and curious machining chip morphology, with tell-tale signs of folding at two different length scales, that is common in cutting of certain ductile and highly strain-hardening metals like soft aluminum alloys, tantalum and niobium. This chip morphology does not appear in the usual catalogues of common chip types. The mechanics of formation of the “dual-scale folded chip” is studied in model material systems of commercially pure aluminum alloys (AA 1100 and AA 8040), that prominently exhibit this chip morphology. The flow, folding and associated plastic instabilities are investigated using micro/macro structure observations of the chip in a plane-strain cutting framework, with high-speed in situ imaging and image analysis of material flow; and force measurements. The smaller-scale folding is shown to develop in the primary deformation zone while the larger-scale folding occurs as the chip traverses the rake face of the tool. The resulting chip is composed of irregularly-spaced large folds, superimposed onto which are the quasi periodic small folds. The representative wavelengths of the two folds differ on average by an order of magnitude, 0.1 mm vs. 2 mm. The observations reveal a direct coupling between the material flow and chip morphology, and how specific attributes of the dual-scale folded chip arise from the flow mechanism. Plastic buckling is found to play a key role in the folding at both length scales. The small-scale folds are characteristic of a sinuous plastic flow mode, while the large-scale folding is characterized by buckling and stick-slip along the tool rake face, triggered by adhesive pinning of the chip to the tool. Important consequences of the dualscale folding are very large cutting forces, and force oscillations of large amplitude, despite the alloys being very soft, only ~ 25 HV. Here, the dual-scale folding is why many of these alloys are classified as “gummy” to machine. Since the dual-scale folded chip is associated with large cutting forces and poor surface quality, there is much to be gained by disrupting this flow type in practical machining applications. Methods for controlling the folding to improve machining performance with the gummy alloys are briefly discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Unpacking Modeling Analysis for the Circular Economy

This session will cover: (1) How models simulate material recovery, recycling, product life cycles and waste management. (2) Using life cycle analysis (LCA) to measure environmental impacts across product life cycles and guide decision-making. (3) Optimizing resource use, reducing energy consumption and minimizing waste in recycling systems. (4) Evaluating EPR and other interventions through scenario analysis to make informed decisions.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Optimising the geospatial configuration of a future lithium ion battery recycling industry in the transition to electric vehicles and a circular economy

Rapid electrification of the transport system will generate substantial volumes of Lithium-ion-battery (LiB) waste as batteries reach their end-of-life. Much attention focuses on the recycling processes, neglecting a broader systemic view that considers the concentration of the costs and impacts associated with logistics and transportation. This paper provides an economic, environmental and geospatial analysis of a future LiB recycling industry in the UK. Hitherto, state-of-the-art assessment methods have evaluated life cycle impacts and costs but have not considered the geographical layer of the problem. This paper develops a GSC derived supply chain model for the UK electric vehicle and end-of-life vehicle battery industry. Considering both pyrometallurgical and hydrometallurgical recycling technologies, the optimisation process takes into account anticipated EV volumes, and, based on anticipated near-term technological evolution of LiBs, the evolution of the mix of battery cathodes in production, and presents a number of scenarios to show where LiB recycling facilities should ideally be geographically located. An economic and environmental assessment based on a customised EverBatt model is provided.

25 ENERGY STORAGE↗
DOE OSTI2021

United States plastics: Large flows, short lifetimes, and negligible recycling

Given increasing concerns for the marine environment and human health, as well as trade restrictions from Asian countries, plastics have become a great challenge for the United States. This study addresses the seven commonly used plastics: low-density polyethylene/linear low-density polyethylene, high-density polyethylene, polyethylene terephthalate (PET), polypropylene, polystyrene, polyvinyl chloride, and other plastics. Material flows of the seven polymers were tracked from production into fabrication, manufacturing, flow into use, waste management, and recycling in the United States in 2015. Low- and high-density polyethylene and polypropylene were found to be the largest in both production and product manufacture. More than 88% of the plastics went into three end-use sectors: Packaging, Consumer and Institutional Products, and Building and Construction. In-use lifetimes across the plastics are generally short. Virgin plastics were mainly exported, while intermediate plastic products were largely imported. The actual end-of-life recycling rate of the plastics as a group was no more than 6.2%, with PET and the polyethylene family the most recycled. Here, the high yearly plastic throughput and low recycling rate pose a serious challenge to the sustainability goals of the United States and is in stark contrast to the vision of a circular economy of plastics.

02 PETROLEUM↗
DOE OSTI2022

U.S. Cobalt: A Cycle of Diverse and Important Uses

We present a material flow and stock analysis for cobalt use and waste in the United States from 1996 to 2020, including the separation of cobalt flows into six product groups and five end-use sectors. The results demonstrate the importance of U.S. manufacturing for air travel, energy storage, cemented carbides, and numerous other applications. Battery use in the United States has become the primary factor in cobalt demand, but the batteries are manufactured mainly elsewhere. The correlation of cobalt products to principal end-use sectors provides an informed view of the location of cobalt in in-use stocks. Furthermore, two approaches could primarily address these stocks: enhanced recycling of batteries in consumer/business electronics and implementing cobalt-free substitutes for chemical uses and future battery technologies. Overall, cobalt's uses are as diverse and societally crucial as any element in the periodic table but have heretofore not received the levels of attention they deserve.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Material flows and GHG emissions from housing stock evolution in US counties, 2020–60

The evolution of housing stocks determines demand for construction materials and energy, and associated emissions of greenhouse gasses (GHGs). The contribution of construction to building life-cycle emissions is growing as buildings become more energy efficient and the energy supply decarbonizes. A housing stock model is developed for counties in the United States using dynamic vacancy rates which endogenously influence stock out- and inflows. Stocks of three house types and 10 construction cohorts are projected for all contiguous US counties for the period 2020–60. Inflows and outflows of construction materials are then estimated along with GHG emissions associated with material production and construction activities in scenarios defined by stock turnover rates, population share by house type, and floor area characteristics of new houses. The results provide new insights into the drivers of construction-related emissions at local and national levels, and identify opportunities for their reduction. Demolition material flows grow in relation to construction material flows over the analysis period. Increasing the stock turnover rate increases future floor area per person, material requirements, and emissions from construction. Scenarios with reduced floor area and more multifamily homes in new construction have lower floor area growth, material requirements, and emissions from construction.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

National and regional waste stream in the United States: conformance and disparity

Accurate estimation of municipal solid waste (MSW) composition is critical for efficient waste management. In the United States, site-specific and material flow approaches determine the MSW composition at regional and national levels. The material flow-based national estimates are determined by the US EPA; the US EPA’s estimates are known to differ substantially from the aggregated tonnage of MSW managed by waste handling facilities in the United States. However, the material class-specific discrepancies of the US EPA’s material flow approach resulting in these differences are unknown. To find the basis of these discrepancies, we analyze the discarded MSW stream of 27 US states, which roughly accounts for 73 percent of the US population. Our analysis indicates that the material flow-based national estimates are accurate for the food, plastic, and glass material classes. In contrast, we find that the US EPA’s material flow-based predictions underestimate paper waste disposal by at least 15 million tons annually. These differences likely stem from incorrect assumptions of residence time. These results highlight the material class-specific strengths and drawbacks of the US EPA’s material flow-based MSW estimates.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Quantifying Energy Flows in PV Circularity Processes: Preprint

As sustainability and end-of-life management become a hot topic to timely address in the PV community, a proper evaluation of the benefits of circular pathways such as recycling, reuse, and remanufacturing has not been performed holistically beyond material flows or LCA analysis. Energy flows are critical for evaluating energy generation technologies. Previously they have been used to compare renewables to fossil generation and then between PV technologies. This paper brings energy flows to bear on reaching circular pathways for PV. The energy flows to track energy usage, generation, and losses complementary to the mass flows are presented for silicon through the leverage of the PV ICE framework.

circular economy↗
DOE OSTI2022

Quantifying Energy Flows in PV Circularity Processes

As sustainable deployment and end-of-life management become a hot topic to timely address in the PV community, a dynamic comparative evaluation of the benefits of circular pathways such as reuse, and remanufacturing, recycling has not been performed holistically beyond material flows or LCA analysis. Energy flows are critical for evaluating energy generation technologies. Previously they have been used to compare renewables to fossil generation and then between PV technologies. This paper quantifies energy flows to evaluate circular pathways for PV. The energy flows tracking manufacturing, generation, and losses complementary to the mass flows of silicon are quantified leveraging the PV ICE framework.

circular economy↗
DOE OSTI2022

Regional analysis of aluminum and steel flows into the American automotive industry

Aluminum and steel represent the two most dominant metals in light duty vehicles, yet the flows of these materials into the American automotive industry have not been well characterized. This study proposes and implements a method for analyzing the flow of these metals into the automotive industry. We create a framework for performing regionally linked, sector specific material flow analyses and use this framework to trace flows of aluminum and steel entering the American automotive industry, focusing on flows downstream from raw material production. We show that automotive aluminum sheet and extrusions are sourced primarily from the NPCC (23%), SERC (20%), MRO (18%), and RFC (13%) NERC regions and a spatially unresolved Local region within the U.S. and Canada (18%). We determine that primary aluminum is largely from Canada (70%), nearly all from Quebec (69%). Further upstream, alumina and bauxite originate mostly from Brazil, Australia, and Jamaica. We also show that finished automotive steel is sourced primarily from the RFC (63%) and SERC (20%) regions. The crude steel supply similarly originates mainly from the RFC (69%) and SERC (7%) regions. Upstream raw materials including coke, coking coal, iron ore, lime, and steel scrap are primarily sourced from the U.S. with only direct reduced iron and pig iron used in electric arc furnace steel production coming mostly from outside the U.S. The framework developed here allows for increased spatial resolution of material flows, which can be used to develop more specific life cycle impact factors for life cycle assessments.

aluminum↗
DOE OSTI2023

Numerical Analysis of Regular Material Point Method and its Application to Multiphase Flows

The material point method (MPM) is gaining wide popularity in engineering research to model and simulate complex multiphase flow dynamics. The method relies on solving the governing equations of motion and transport in a Lagrangian framework using particles also known as material points. The fluid and kinematic properties are stored on the material points while the spatial gradient calculation and temporal integration are performed on a background grid. This Lagrangian framework allows for large deformations, easy integration of constitutive models, and direct import of complex geometries as particles. However, despite their increasing popularity, very few studies have addressed the issues of numerical resolution and stability of MPM techniques. The presence of additional factors such as the number of material points-per-cell, the location of the material points, the CFL-like condition used in time update, and the grid shape functions also increase the complexity of the error analysis when compared to other finite element methods. In this presentation, we analyze the various forms of error incurred in the application of MPM to continuum mechanics and multiphase flows. The effect of the previously mentioned factors on the error dynamics is studied. The application of these principles to canonical and industrial problems is also presented.

high pressure reverse osmosis↗