SEARCH · Search NASA

Results for “Mechanical Systems Engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Geometric control of hyperbolic exciton-polariton condensate dimers

Coupled many-body quantum systems exhibit rich emergent physics with diverse stationary and dynamical behaviours. By engineering platforms with tunable and distinct coupling mechanisms, new insights emerge into the collective behaviour of coupled many body systems. Particles can be exchanged via evanescent or ballistic coupling: the former, based on proximity, yields large spectral splitting, while the latter requires strict phase-matching, analogous to phase-coupled harmonic oscillators and has a smaller impact on the energy landscape. We demonstrate an all-optically tunable quantum fluid dimer based on exciton-polariton condensates in a photonic crystal waveguide with hyperbolic (saddle-like) dispersion. Varying the dimer’s angle relative to the grating tunes the coupling from evanescent to ballistic. We directly observe spectral features and mass flow shaped by the saddle dispersion. This work highlights photonic crystals as powerful platforms to explore condensed matter phenomena lying at the interface between delay-coupled nonlinear oscillators and tight binding physics.

Georgakilas, Ioannis [IBM Research-Zurich, Rüschli↗

DOE OSTI2026

Second Order System Study

During my education in mathematics, engineering and physics, I learned transform pairs and their usage mechanics but I never remember seeing the derivations of the solutions to second order ordinary differential equations (ODE) and difference equations. A solution to a question posed in a potential funder meeting put me on a path to solving second order systems using the five principal Fourier based methods: Fourier transform (FT), Z-transform (ZT), discrete time Fourier transform (DTFT), discrete Fourier transform (DFT) and Laplace transform (LT).

42 ENGINEERING↗

DOE OSTI2025

REIMAGINING HEAT EXCHANGERS FOR NEXT GENERATION ENVIRONMENTAL SYSTEMS

Air-to-refrigerant heat exchangers (HXs) are essential components in space conditioning, refrigeration, and power systems, and recent efforts have focused on making these devices more compact, reducing refrigerant charge and lowering manufacturing costs. Historically, HX innovation has been limited by available computational resources, design tools, and manufacturing constraints. The best available technologies utilize tube-fin and micro- or macro-channel tubes with fins, which are not necessarily the optimal designs achievable with current technology. In this paper, we highlight the latest advancements in air-to-refrigerant HXs, specifically emphasizing innovations achieved through shape and topology optimization. A multi-scale design optimization approach is introduced, alongside similar methods in literature, which enable highly sophisticated shape-optimized tube designs with more than 50% reduction in size and 25% reduction in refrigerant charge, essential for A3 refrigerant charge limit compliance. The frameworks integrate traditional heat and mass transfer science with state-of-the-art machine learning, genetic algorithms, and adjoint algorithms to create novel designs. While many of these innovative designs may not be manufacturable using conventional methods, they allow us explore the boundaries of what is possible. These novel air-to-refrigerant HXs are key enablers for ultra-low-refrigerant charge heat pump and refrigeration systems.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2026

Convergence Criteria for Multiphysics Simulations

The behavior of engineered systems is often influenced by multiple physical phenomena, such as mechanical deformation, heat transfer, and chemical species transport and reactions. There are often strong interactions between these phenomena, and there is increasing interest in applying coupled-physics models to improve understanding of physical behavior under complex environmental conditions. Multiple simulation frameworks that facilitate coupled-physics simulations are in widespread use, and these employ a variety of techniques to account for interactions between those physics. Many frameworks solve the physics models independently and transfer results between them. Alternatively, a single monolithic system of equations for every physics model can be formed and solved. Each of these approaches has its benefits and drawbacks, and the optimal approach varies depending on the nature of the problem. The open-source MOOSE framework was developed targeting solution of large-scale multiphysics problems. Although it provides options for all these coupling approaches, its standard approach for multiphysics solutions is to form and solve a single monolithic system of equations containing the unknowns for all physics models. MOOSE provides a streamlined approach for users to define the solution variables, the terms in the partial differential equations pertaining to each variable, and interactions between solution variables. One aspect of the monolithic solution approach that can be problematic, however, is defining appropriate convergence criteria for the nonlinear system. A standard approach is to determine convergence is to simply take a norm of the residual vector corresponding to the full vector of unknowns. However, if the residual vector contains variables for multiple physics models, the magnitudes of those variables can differ significantly, and the variables can converge at significantly different rates from each other. It is important to ensure that the variables for each of the physics are converged, and also ensure that the convergence criteria are not excessively stringent in cases when there is little change in the solution. This talk presents representative multiphysics problems to highlight these issues, and shows strategies for convergence criteria in MOOSE that are robust for multiphysics models under a variety of conditions.

97 - MATHEMATICS AND COMPUTING↗

DOE OSTI2025

Secure biosystems design in Saccharomyces cerevisiae establishes effective biocontainment strategies and mechanisms of escape

The widespread application of recombinant DNA and synthetic biology approaches for microbial metabolic engineering pursuits has motivated the development of biocontainment strategies, targeting safe and secure deployment of genetically modified microorganisms (GMMs). However, the design rules and mechanistic drivers governing biocontainment efficacy, as well as impacts of biocontainment upon microbial fitness, remain to be comprehensively evaluated, hindering predictive design and application of these strategies. We have developed a platform for high-resolution analysis of a transactivated kill switch in laboratory and industrial strains of Saccharomyces cerevisiae to assess modes of biocontainment escape and establish design rules for development of kill switch systems in diverse microbes. A camphor-regulated, RelE toxin system was systematically deployed to assess the impacts of differential kill switch copy number and ploidy in laboratory vs industrial strains. CRISPR-mediated integration of the biocontainment system at various loci revealed rapid escape events driven, in part, by mutations to both the Cam-transactivator (cam-TA) and RelE toxin. Genetic engineering enabled recapitulation of escape phenotypes, confirming mechanisms of escape and establishing structure-function relationships in the cam-TA system. Interestingly, genomic resequencing of escape mutants also revealed a series of off-target mutations, implicating additional modes of kill switch escape. Multi-copy integration of the kill switch system mitigated these effects by orders of magnitude, without compromising the biosynthetic capacity of the microbes, but proved insufficient to establish sustained biocontainment. The resultant data define a series of key design rules for next-generation biocontainment strategies and add to a growing foundational knowledge base targeting establishment of secure biosystems designs.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2025

Nuclear Materials Packaging, Transportation, and Systems Analysis Group Software Quality Assurance Plan: ANSYS Mechanical Finite Element Analysis Software Version 2023R1

ANSYS Inc. develops and markets engineering simulation software and services used in the aerospace, automotive, manufacturing, electronics, biomedical, energy, defense, and many other industries. ANSYS is dedicated to engineering simulation and is the world’s leading software provider. ANSYS was founded in 1970 and is headquartered in Canonsburg, Pennsylvania. ANSYS provides an engineering analysis tool combining structural, thermal, computational fluid dynamics, acoustic, and electromagnetic simulation capabilities. ANSYS has two main programs, which use the same solvers: (1) Mechanical APDL (ANSYS Design Parametric Language), a Fortran-based coding platform, and (2) ANSYS Workbench, which uses a graphical user interface to aid in finite element analysis implementation. This plan covers both APDL and Workbench. The ANSYS computer program is a large-scale, multipurpose finite element program that can be used to solve several classes of engineering analyses. The analysis capabilities of ANSYS include the ability to solve static and dynamic structural analyses, steady-state and transient heat transfer problems, mode-frequency and buckling eigenvalue problems, static or time-varying magnetic analyses, and various types of field and coupled-field applications. The program contains many special features that allow nonlinearities or secondary effects such as plasticity, large strain, hyperelasticity, creep, swelling, large deflections, contact, stress stiffening, temperature dependency, material anisotropy, and radiation to be included in the solution. As ANSYS has been developed, other special capabilities such as substructuring, submodeling, random vibration, kinetostatics, kinetodynamics, free convection fluid analysis, acoustics, magnetics, piezoelectrics, coupled-field analysis, and design optimization have been added to the program. These capabilities contribute further to making ANSYS a multipurpose analysis tool for varied engineering disciplines. The ANSYS program has been in commercial use for over 50 years and has been used extensively in the aerospace, automotive, construction, electronic, energy services, manufacturing, nuclear, plastics, oil, and steel industries. Additionally, many consulting firms and hundreds of universities have used ANSYS for analysis, research, and educational purposes. ANSYS is recognized worldwide as one of the most widely used and capable programs of its type. Ansys design analysis software is the first created within a quality system with ISO 9001 certification, the internationally accepted quality standard. Product development, testing, maintenance and support processes also meet the United States Nuclear Regulatory Commission's quality requirements, as they have for nearly four decades. The Quality Assurance Service Agreement is suitable for the customers working in the nuclear industry who need to meet specific federal regulations including 10CRF50 Appendix B and provisions of 10CFR21. ANSYS has retained its original International Organization for Standardization (ISO) 9001 accreditation certificate since1995-05-04, It’s current certificate is valid until 2027-05-29.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2026

Complex Electrical Conductivity of a Single‐Fractured Rock: Fracture‐and‐Matrix Coupling Mechanism and Aperture Size Predictions

Fractured rocks play a crucial role in myriad natural and engineered systems, including Earth's critical zone, oil/gas/geothermal reservoirs, and geological CO 2 /H 2 /waste storage systems. While complex electrical conductivity is extensively used to estimate the pore and grain sizes of conventional porous rocks and soils, it is rarely used to predict the aperture size of fractured rocks and this remains poorly understood. Here, integrating theory, simulations, and experiments, we show that under external fields, fractured rocks follow the fracture-and-matrix coupling to make the bulk complex conductivity non-linear with respect to water conductivity. We find that the relaxation time and quadrature conductivity for porous media do not apply to fractured rocks, but, instead, reasonably accurate predictions of aperture size can be made based on the true formation factor. This study unravels the fundamental mechanism governing conduction and polarization of fractured rocks and paves the way for the non-invasive investigation of global fractured rocks.

58 GEOSCIENCES↗

DOE OSTI2025

Lessons learned from the design and operation of a small-scale cross-flow tidal turbine

In 2023, a first-generation prototype of a small-scale marine current turbine was operated in Sequim Bay, Washington (USA) for 141 days. The system, referred to as the Turbine Lander, was the product of a laboratory-to-field effort to develop a system that enables enhanced ocean sensing or vehicle recharge in remote, energetic settings. The turbine consists of a vertical-axis, cantilevered rotor (1.19 m x 0.85 m) with four foils installed on a gravity foundation. A broader range of constraints including the deployment strategy, site characteristics, and estimated loads, drove the system’s design. This work presents the design, characterization, operation, and post-recovery engineering assessment of the Turbine Lander. Pre-deployment characterization efforts yielded a peak power coefficient of approximately 0.3 for the rotor, although system losses resulted in much lower water-to-wire efficiencies under most operating conditions. The results demonstrate the importance of co-design among key components of the powertrain and control systems to achieve acceptable system efficiency across operating conditions.

Co-design↗

DOE OSTI2025

Engineering Design Report: High-Pressure Safety Squib

This project encompassed the mechanical portion of the squib system and included the design and analysis of the valve body, selection of tube and tube fittings, valve mounting, and initiator/detonator selection. The electrical portion of the squib has already been designed by another team and is outside of the scope of the project. Electrical information and requirements provided are only for use in selecting a compatible detonator/initiator.

42 ENGINEERING↗

DOE OSTI2025

Autonomous Aerosol and Plasma Co‐Jet Printing of Metallic Devices at Ambient Temperature

Abstract Additive manufacturing of metallic materials holds the potential to revolutionize the fabrication of functional devices unattainable via traditional methods. Despite recent advancements, printing metallic materials typically requires thermal processing at elevated temperatures to form dense structures with desired properties, which presents a major challenge for direct printing and integration with temperature‐sensitive materials. Herein, a unique co‐jet printing (CJP) method is reported integrating an aerosol jet and a non‐thermal, atmospheric pressure plasma jet to enable concurrent aerosol deposition of metal nanoparticle inks and in situ sintering at ambient temperature. A machine learning algorithm is integrated with the CJP to perform real‐time defect detection and autonomous correction, enhancing the yield of printed films with high electrical conductivity from 44% to 94%. Concurrent printing and sintering eliminate the need for post‐printing processing, reducing the overall manufacturing time by multiple folds depending on product size. CJP enables direct printing of functional devices on a variety of temperature‐sensitive materials including biological materials. Direct printing of hydration sensors on living plant leaves is demonstrated for long‐duration monitoring of hydration level in the plant. The versatile CJP method opens tremendous opportunities to harmoniously integrate abiotic and biotic materials for emerging applications in wearable/implantable devices and biohybrid systems.

Du, Yipu [Department of Aerospace and Mechanical E↗

DOE OSTI2025

Effect of pore fluid chemistry on the mechanical behavior of a divalent compacted bentonite, an experimental and constitutive study

Ongoing research in isolating high-level nuclear waste and spent fuel has highlighted compacted bentonite as a suitable material for engineered barrier systems in deep geological repositories due to its extraordinary swelling and retention properties. This research focuses on the chemo-mechanical behavior of compacted bentonite exposed to different pore fluids with different concentrations and loading conditions. The study involves swelling pressure and compressibility experiments along with mineralogy analysis employing X-ray diffraction (XRD) and Cation exchange. The tests were conducted on BCV (a Mg/Ca- bentonite) compacted at a dry density of 1.48 ± .02 Mg/m 3 . An advanced chemical-mechanical constitutive model for unsaturated highly expansive clays was adopted to simulate the material response and better understand its behavior. The model is able to account for the main phenomena at both macro and microstructural levels and the interactions between them. The model successfully replicated experimental observations. The XRD analyses support the macroscopic observation, indicating that salinity impacts crystalline swelling as demonstrated by the reduction of basal spacing from 19.27 Å to 15.68 Å when the osmotic suction increases from 0 MPa to 33 MPa. The results suggested that the osmotic pressure generated by the concentration in the pore fluids promotes a reduction in swelling pressures, swelling strains, and crystalline swelling of clay minerals. Also, it affects the pre-consolidation stress and the compressibility of the compacted samples. In conclusion, it was also observed that both solution type and solution concentration impact the clay swelling pressure.

Chemo-mechanical constitutive model↗

DOE OSTI2025

Investigation of heat pump technologies for high-temperature applications above 250 °C

This paper examines heat pump (HP) technologies to achieve heat supply temperatures above 250 °C, referred to as ultra-high-temperature heat pump (UHTHP). UHTHP, as a low-carbon heat delivery and heat augmentation technology, can offer an alternative to traditional combustion heating for decarbonizing high-temperature industrial processes. However, the heat supply temperature of over 250 °C surpasses the temperature range typically covered in the high-temperature HP literature and existing capabilities of commercial HP systems. This paper reviews HP technologies with the potential to evolve into UHTHP. Additionally, UHTHP studies in the literature are analyzed to compare the pros, cons, and technical potentials of various HPs using different thermodynamic cycles and fluids. Furthermore, we then pinpoint the technical gaps and challenges that have hindered widespread adoption of UHTHP in industry, explore potential improvements and solutions, and discuss the feasibility. Current efforts aim to lay the ground for future research, development, and commercial deployment for UHTHP.

32 - ENERGY CONSERVATION, CONSUMPTION, AND UTILIZA↗

DOE OSTI2025

Investigation of kinetic inductance and microwave loss in thin-film TaC x N 1−x superconducting resonators

The promise of tantalum for realizing superconducting quantum devices has generated interest in its compound films, particularly nitrides. Among these, cubic-phase tantalum carbonitride (TaC x N 1−x ) offers reduced susceptibility to oxidation and a high critical temperature, yet its microwave properties remain largely unexplored. Here, in this study, we investigate plasma-enhanced atomic layer deposition of cubic-phase TaC x N 1−x thin films for superconducting microwave circuits. Structural and transport measurements reveal nanocrystalline morphology with sub-10 nm grains and superconductivity in the dirty limit. Coplanar waveguide resonators exhibit moderately high kinetic inductance (16.8 pH/sq for 30 nm films) with potential for enhancement through dimensional scaling. The films also support high internal quality factors exceeding 10 5 at 50 mK in the single-photon regime, comparable to granular aluminum. Loss analysis identifies the two-level systems as the dominant limiting mechanism, with potential for further reduction through interface engineering. These results establish atomic layer deposited TaC x N 1−x as a promising material for scalable, low-loss, high-inductance superconducting circuits.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2026

Non-Contact Eddy Current Method for Assessing Proton Conductivity in Nafion Membranes

Accurate measurement of proton conductivity in Proton Exchange Membranes (PEMs) is vital for fuel cell performance and durability. This study explores eddy current testing as a non-destructive, non-contact and high-rate quality control (QC) method for measuring Nafion membrane proton conductivity, with potential for high-volume manufacturing applications.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2024

A Geometric Derivation of the Governing Equations of Motion of Nonholonomic Dynamic Systems

Here, in this paper, we present a Riemannian geometric derivation of the governing equations of motion of nonholonomic dynamic systems. A geometric form of the work-energy principle is first derived. The geometric form can be realized in appropriate generalized quantities, and the independent equations of motion can be obtained if the subspace of generalized speeds allowable by nonholonomic constraints can be determined. We provide a geometric perspective of the governing equations of motion and demonstrate its effectiveness in studying dynamic systems subjected to nonholonomic constraints.

42 ENGINEERING↗

DOE OSTI2025

Tunable shear thickening, aging, and rejuvenation in suspensions of shape-memory-endowed liquid crystalline particles

The morphological features of particles, notably shape anisotropy, critically influence the rheological properties of dense suspensions, spanning both natural and engineered systems. This work explores the potential of using shape memory particles to dynamically regulate suspension fluid flow through controllable shape transformations. First, we synthesize shape-memory particles with programmable anisotropy from liquid crystal elastomers, such that the stiffness and shapes of the particles can be tuned by manipulating temperature. Our findings reveal that suspensions from such particles exhibit significant tunability in shear thickening behavior, transitioning from discontinuous shear thickening to a Newtonian-like response within a narrow temperature range of 60 ° C. This capability to modulate rheological responses in situ presents an approach for addressing processing challenges in many applications where control over flow behavior is paramount. Furthermore, we also show that suspensions composed of these anisotropic particles can undergo physical aging, and evolve into a glassy state. This state can be escaped upon activation of the shape memory effect. This reversibility underscores the potential for using such materials to engineer systems that can enter or come out of kinetic arrest by leveraging internal mechanical responses to external stimuli. The insights gained here not only broaden our understanding of the interplay between particle geometry and suspension dynamics but also pave the way for leveraging ensembles of stimuli-responsive objects to precisely control collective behaviors in many-body systems.

Science & Technology - Other Topics↗

DOE OSTI2025

Corrosion and Mechanical Durability Testing in High Temperature Molten Sulfur (CRADA Final Report)

The overall goal of the project is to explore and identify suitable candidate materials for high-temperature molten sulfur thermal energy storage (TES) operating up to a maximum temperature of 400°C–420°C for industrial process heat applications. A detailed corrosion and strength analysis of coupons subjected to long-term thermal testing in molten sulfur will be conducted to characterize the fundamental corrosion mechanism, corrosion rates, and mechanical durability. The results from the project contribute to the engineering design of sulfur TES systems with desired longevity and lower construction and maintenance costs. The research outcome benefits the TES research and development community by providing detailed corrosion and degradation information for more effective engineering design of the molten sulfur TES containment. It improves the diversity and reliability of the renewable technologies available for the U.S. industries and U.S. power grid.

14 SOLAR ENERGY↗

DOE OSTI2026

Engineering mechanical and thermomechanical performance in additive manufacturing–Compression molded composites through multiplexed extrusion

Traditional extrusion-based additive manufacturing is limited to single material systems, restricting the multifunctional properties of composites. For this work to overcome this limitation, multiplexed additive manufacturing–compression molding (AM-CM) was employed to fabricate multi-material thermoplastic composites with spatially tailored architectures. Neat acrylonitrile butadiene styrene (ABS) and 20 wt% carbon-fiber reinforced ABS (CF-ABS) were co-extruded through a core–sheath nozzle to produce hybrid composites with neat ABS as sheath (30-50 wt%) and CF-ABS as core (50 – 70 wt%). The results show that the hybrid composites have balance of mechanical and thermomechanical performance. The tensile strength and modulus of hybrid composites exhibited a 61–95% and 173–473% increase compared to neat ABS with increases in CF-ABS content whereas the impact resistance improved by 41% compared to CF-ABS at 50 wt% ABS. Additionally, hybrid composites showed significant reduction (54 - 70%) in creep strain at 100 °C compared to neat ABS. These findings demonstrate that multiplexed AM-CM enables tunable structure–property relationships, reducing CF-ABS usage up to 50 wt% while maintaining balanced stiffness, toughness, and creep resistance.

Additive manufacturing↗