Search NASA⌕ Search

SEARCH · Search NASA

Results for “Memory cell”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Modeling of SONOS Memory Cell Erase Cycle

Utilization of Silicon-Oxide-Nitride-Oxide-Silicon (SONOS) nonvolatile semiconductor memories as a flash memory has many advantages. These electrically erasable programmable read-only memories (EEPROMs) utilize low programming voltages, have a high erase/write cycle lifetime, are radiation hardened, and are compatible with high-density scaled CMOS for low power, portable electronics. In this paper, the SONOS memory cell erase cycle was investigated using a nonquasi-static (NQS) MOSFET model. Comparisons were made between the model predictions and experimental data.

Phillips, Thomas A.↗

Growth and self-assembly of BaTiO{sub 3} nanocubes for resistive switching memory cells

In this work, the self-assembled BaTiO{sub 3} nanocubes based resistive switching memory capacitors are fabricated with hydrothermal and drop-coating approaches. The device exhibits excellent bipolar resistance switching characteristics with ON/OFF ratio of 58–70, better reliability and stability over various polycrystalline BaTiO{sub 3} nanostructures. It is believed that the inter cube junctions is responsible for such a switching behaviour and it can be described by the filament model. The effect of film thickness on switching ratio (ON/OFF) was also investigated in details. - Graphical abstract: This work describes a novel resistive switching memory cell based on self-assembled BaTiO{sub 3} nanocubes. - Highlights: • BaTiO{sub 3} nanocubes were prepared by one step facile hydrothermal method. • Self-assembled BaTiO{sub 3} nanocubes thin films were obtained by drop-coating approach. • The BaTiO{sub 3} nanocubes show excellent resistive switching properties for memory applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Circuit arrangement and technique for setting matrix values in three-terminal memory cells

A method for programming substantially simultaneously more than one of the three-terminal memory cells that represent the values of a matrix to be multiplied by a vector is disclosed. Programming may be achieved by controlling the gate-drain voltage for more than one cell simultaneously to change each such cell's physical state and hence its effective resistance. Illustratively, the gates of each row of the cells corresponding to the matrix are coupled together and each coupled row is coupled to a respective controllable voltage source while the drains of each column of the cells of the matrix are coupled together and each coupled column is coupled to a respective controllable voltage source. The controllable voltage sources are arranged so that at the intersection of a row and a column, a cell experiences one of three conditions: increase effective resistance, decrease effective resistance, or substantially no change.

97 MATHEMATICS AND COMPUTING↗

Influence of carbon content on the copper-telluride phase formation and on the resistive switching behavior of carbon alloyed Cu-Te conductive bridge random access memory cells

In this paper, we investigate the influence of the carbon content on the Cu-Te phase formation and on the resistive switching behavior in carbon alloyed Cu{sub 0.6}Te{sub 0.4} based conductive bridge random access memory (CBRAM) cells. Carbon alloying of copper-tellurium inhibits the crystallization, while attractive switching behavior is preserved when using the material as Cu-supply layer in CBRAM cells. The phase formation is first investigated in a combinatorial way. With increasing carbon content, an enlargement of the temperature window in which the material stays amorphous was observed. Moreover, if crystalline phases are formed, subsequent phase transformations are inhibited. The electrical switching behavior of memory cells with different carbon contents is then investigated by implementing them in 580 μm diameter dot TiN/Cu{sub 0.6}Te{sub 0.4}-C/Al{sub 2}O{sub 3}/Si memory cells. Reliable switching behavior is observed for carbon contents up to 40 at. %, with a resistive window of more than 2 orders of magnitude, whereas for 50 at. % carbon, a higher current in the off state and only a small resistive window are present after repeated cycling. This degradation can be ascribed to the higher thermal and lower drift contribution to the reset operation due to a lower Cu affinity towards the supply layer, leading cycle-after-cycle to an increasing amount of Cu in the switching layer, which contributes to the current. The thermal diffusion of Cu into Al{sub 2}O{sub 3} under annealing also gives an indication of the Cu affinity of the source layer. Time of flight secondary ion mass spectroscopy was used to investigate this migration depth in Al{sub 2}O{sub 3} before and after annealing, showing a higher Cu, Te, and C migration for high carbon contents.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ferroelectric symmetry-protected multibit memory cell

Here, the tunability of electrical polarization in ferroelectrics is instrumental to their applications in information-storage devices. The existing ferroelectric memory cells are based on the two-level storage capacity with the standard binary logics. However, the latter have reached its fundamental limitations. Here we propose ferroelectric multibit cells (FMBC) utilizing the ability of multiaxial ferroelectric materials to pin the polarization at a sequence of the multistable states. Employing the catastrophe theory principles we show that these states are symmetry-protected against the information loss and thus realize novel topologically-controlled access memory (TAM). Our findings enable developing a platform for the emergent many-valued non-Boolean information technology and target challenges posed by needs of quantum and neuromorphic computing.

36 MATERIALS SCIENCE↗

Electrical performance of phase change memory cells with Ge{sub 3}Sb{sub 2}Te{sub 6} deposited by molecular beam epitaxy

Here, we report on the electrical characterization of phase change memory cells containing a Ge{sub 3}Sb{sub 2}Te{sub 6} (GST) alloy grown in its crystalline form by Molecular Beam Epitaxy (MBE). It is found that the high temperature growth on the amorphous substrate results in a polycrystalline film exhibiting a rough surface with a grain size of approximately 80–150 nm. A detailed electrical characterization has been performed, including I-V characteristic curves, programming curves, set operation performance, crystallization activation at low temperature, and resistance drift, in order to determine the material related parameters. The results indicate very good alignment of the electrical parameters with the current state-of-the-art GST, deposited by physical vapor deposition. Such alignment enables a possible employment of the MBE deposition technique for chalcogenide materials in the phase change memory technology, thus leading to future studies of as-deposited crystalline chalcogenides as integrated in electrical vehicles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On the bipolar resistive-switching characteristics of Al₂O₃- and HfO₂-based memory cells operated in the soft-breakdown regime

In this article, we investigate extensively the bipolar-switching properties of Al₂O₃- and HfO₂-based resistive-switching memory cells operated at low current down to <1 μA. We show that the switching characteristics differ considerably from those typically reported for larger current range (>15 μA), which we relate as intrinsic to soft-breakdown (SBD) regime. We evidence a larger impact of the used switching-oxide in this current range, due to lower density of oxygen-vacancy (V{sub o}) defects in the SBD regime. In this respect, deep resetting and large memory window may be achieved using the stoichiometric Al₂O₃ material due to efficient V{sub o} annihilation, although no complete erasure of the conductive-filament (CF) is obtained. We finally emphasize that the conduction may be described by a quantum point-contact (QPC) model down to very low current level where only a few V{sub o} defects compose the QPC constriction. The large switching variability inherent to this latter aspect is mitigated by CF shape tuning through adequate engineering of an Al₂O₃\HfO₂ bilayer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characteristics of a Nonvolatile SRAM Memory Cell Utilizing a Ferroelectric Transistor

The SRAM cell circuit is a standard for volatile data storage. When utilizing one or more ferroelectric transistors, the hysteresis characteristics give unique properties to the SRAM circuit, providing for investigation into the development of a nonvolatile memory cell. This paper discusses various formations of the SRAM circuit, using ferroelectric transistors, n-channel and p-channel MOSFETs, and resistive loads. With varied source and supply voltages, the effects on the timing and retention characteristics are investigated, including retention times of up to 24 hours.

Mitchell, Cody↗

An analytical method for predicting CMOS SRAM upsets with application to asymmetrical memory cells

An analytical method was developed to predict the heavy-ion-induced upset rate of static random access memory (SRAM) cells. The method was applied to the design of a memory with asymmetrical cells where the goal was to increase the upset rate in order to increase the number of observed upsets in a space environment. The asymmetry is achieved by increasing the drain area of selected transistors in the cell. Results from the analytical model for a space environment indicate the upset rate for the experimental asymmetrical cell (17.2 upsets/1 kbit-year) will be 4.7 times larger than the upset rate for the minimum-geometry balanced cell (3.6 upsets/1 kbit-year). The asymmetrical SRAM was designed into a test chip intended for the Combined Release and Radiation Effects Satellite (CRRES).

Buehler, Martin G.↗

Strategic priming with multiple antigens can yield memory cell phenotypes optimized for infection with Mycobacterium tuberculosis : A computational study

Lack of an effective vaccine results in 9 million new cases of tuberculosis (TB) every year and 1.8 million deaths worldwide. While many infants are vaccinated at birth with BCG (an attenuated M. bovis ), this does not prevent infection or development of TB after childhood. Immune responses necessary for prevention of infection or disease are still unknown, making development of effective vaccines against TB challenging. Several new vaccines are ready for human clinical trials, but these trials are difficult and expensive; especially challenging is determining the appropriate cellular response necessary for protection. The magnitude of an immune response is likely key to generating a successful vaccine. Characteristics such as numbers of central memory (CM) and effector memory (EM) T cells responsive to a diverse set of epitopes are also correlated with protection. Promising vaccines against TB contain mycobacterial subunit antigens (Ag) present during both active and latent infection. We hypothesize that protection against different key immunodominant antigens could require a vaccine that produces different levels of EM and CM for each Ag-specific memory population. We created a computational model to explore EM and CM values, and their ratio, within what we term Memory Design Space. Our model captures events involved in T cell priming within lymph nodes and tracks their circulation through blood to peripheral tissues. We used the model to test whether multiple Ag-specific memory cell populations could be generated with distinct locations within Memory Design Space at a specific time point post vaccination. Boosting can further shift memory populations to memory cell ratios unreachable by initial priming events. By strategically varying antigen load, properties of cellular interactions within the LN, and delivery parameters (e.g., number of boosts) of multi-subunit vaccines, we can generate multiple Ag-specific memory populations that cover a wide range of Memory Design Space. As a result, given a set of desired characteristics for Ag-specific memory populations, we can use our model as a tool to predict vaccine formulations that will generate those populations.

59 BASIC BIOLOGICAL SCIENCES↗

SEU hardened memory cells for a CCSDS Reed-Solomon encoder

A design technique to harden CMOS memory circuits against single event upset (SEU) in the space environment is reported. The design technique provides a recovery mechanism which is independent of the shape of the upsetting event. A RAM cell and flip-flop design are presented to demonstrate the method. The flip-flop was used in the control circuitry for a Reed-Solomon encoder designed for the Space Station and Explorer platforms.

Whitaker, Sterling↗

Total dose effect on soft error rate for dynamic metal-oxide-semiconductor memory cells

A simple model for the soft error rate for dynamic metal-oxide-semiconductor random access memories due to normal galactic radiation was devised and then used to calculate the rate of decrease of the single-event-upset rate with total radiation dose. The computation shows that the decrease in the soft error rate is less than 10 percent per day if the shielding is 0.5 g/sq cm and the spacecraft is in a geosynchronous orbit. The decrease is considerably less in a polar orbiting device.

Benumof, Reuben↗

Thermal-gradient-driven elemental segregation in Ge 2 Sb 2 Te 5 phase change memory cells

Thermal gradients have been predicted to play a large role in compositional segregation leading to failure in phase change memories. We have developed a methodology for isolating thermal-gradient driven segregation effects without interference from the electric field. In Ge 2 Sb 2 Te 5 functional layers, Sb and Te move along the temperature gradient, while Ge segregates in the opposite direction. The direction of segregation is consistent for devices that were repeatedly melted, as well as for devices that were never melted and remained in the polycrystalline state. Here, the results have implications for the reliability of phase change memories.

36 MATERIALS SCIENCE↗

Computational and Experimental Simulation of Static Memory Cells of Submicron Microcircuits under the Effect of Neutron Fluxes

The simulation of reversible single events in test samples of static memory microcircuits with design norms of 0.5, 0.35, 0.25, and 0.1 μm under the effect of neutron fluxes with various energies is performed. It is shown theoretically and experimentally that reversible single events can occur in modern microelectronics and nanoelectronics products under the effect of a fission-spectrum neutron flux caused by the passage of primary recoil atoms and nuclear reaction products along the microcircuit surface perpendicularly to the electric current lines in the near-drain transistor area. A series of irradiation experiments of static memory circuits with design norms of 0.35 μm is interpreted based on the proposed model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Impact of time and space evolution of ion tracks in nonvolatile memory cells approaching nanoscale

Swift heavy ions impacting on matter lose energy through the creation of dense tracks of charges. The study of the space and time evolution of energy exchange allows understanding the single event effects behavior in advanced microelectronic devices. In particular, the shrinking of minimum feature size of most advanced memory devices makes them very interesting test vehicles to study these effects since the device and the track dimensions are comparable; hence, measured effects are directly correlated with the time and space evolution of the energy release. In this work we are studying the time and space evolution of ion tracks by using advanced non volatile memories and Monte Carlo simulations. Experimental results are very well explained by the theoretical calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evidence for thermally assisted threshold switching behavior in nanoscale phase-change memory cells

In spite of decades of research, the details of electrical transport in phase-change materials are still debated. In particular, the so-called threshold switching phenomenon that allows the current density to increase steeply when a sufficiently high voltage is applied is still not well understood, even though there is wide consensus that threshold switching is solely of electronic origin. However, the high thermal efficiency and fast thermal dynamics associated with nanoscale phase-change memory (PCM) devices motivate us to reassess a thermally assisted threshold switching mechanism, at least in these devices. The time/temperature dependence of the threshold switching voltage and current in doped Ge{sub 2}Sb{sub 2}Te{sub 5} nanoscale PCM cells was measured over 6 decades in time at temperatures ranging from 40 °C to 160 °C. We observe a nearly constant threshold switching power across this wide range of operating conditions. We also measured the transient dynamics associated with threshold switching as a function of the applied voltage. By using a field- and temperature-dependent description of the electrical transport combined with a thermal feedback, quantitative agreement with experimental data of the threshold switching dynamics was obtained using realistic physical parameters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Field-current phase diagrams of in-plane spin transfer torque memory cells with low effective magnetization storage layers

Field-current phase diagrams were measured on in-plane anisotropy Co{sub 60}Fe{sub 20}B{sub 20} magnetic tunnel junctions to obtain the spin transfer torque (STT) field-current switching window. These measurements were used to characterise junctions with varying free layer thicknesses from 2.5 down to 1.1 nm having a reduced effective demagnetizing field due to the perpendicular magnetic anisotropy at CoFeB/MgO interface. Diagrams were obtained with 100 ns current pulses, of either same or alternating polarity. When consecutive pulses have the same polarity, it is possible to realize the STT switching even for conditions having a low switching probability. This was evidenced in diagrams with consecutive pulses of alternating polarity, with 100% switching obtained at 4.7 MA/cm{sup 2}, compared to the lower 3.4 MA/cm{sup 2} value for same polarity pulses. Although the low level of the current density window is higher in alternating polarity diagrams, the field window in both diagrams is the same and therefore independent of the pulse polarity sequence.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗