Search NASA⌕ Search

SEARCH · Search NASA

Results for “Metal insulator transition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Nonlinear electrical transport near the metal–insulator transition in V 4 O 7 thin films

Nonlinear electrical transport associated with correlated electronic states has been widely investigated in transition-metal oxides near metal–insulator transitions. Here, in this study, we investigate nonlinear transport and threshold switching in sputter-deposited V 4 O 7 thin films grown on fused silica substrates. Temperature-dependent transport measurements show a metal–insulator transition near 240 K with negligible thermal hysteresis, defining the temperature scale that governs the nonlinear electrical response. Current–voltage measurements reveal reproducible bipolar threshold switching over a broad temperature range, with the threshold voltage decreasing systematically as the transition temperature is approached. Electrothermal finite-element simulations reproduce the measured switching characteristics and show that switching occurs when localized Joule heating drives a confined region of the device toward the transition temperature. The simulated peak local temperature at threshold lies close to the intrinsic metal–insulator transition temperature of V 4 O 7 , establishing that the nonlinear electrical response originates from electrothermal feedback acting on the strongly temperature-dependent conductivity near the transition. These results identify V 4 O 7 thin films as a model correlated-oxide system in which volatile threshold switching emerges from proximity to an extended metal–insulator transition.

25 ENERGY STORAGE↗
DOE OSTI2021

Low-Temperature 2D/2D Ohmic Contacts in WSe 2 Field-Effect Transistors as a Platform for the 2D Metal–Insulator Transition

in this work, we report the fabrication of hexagonal-boron-nitride (hBN) encapsulated multiterminal WSe 2 Hall bars with 2D/2D low-temperature Ohmic contacts as a platform for investigating the two-dimensional (2D) metal-insulator transition. We demonstrate that the WSe 2 devices exhibit Ohmic behavior down to 0.25 K and at low enough excitation voltages to avoid current-heating effects. Additionally, the high-quality hBN-encapsulated WSe 2 devices in ideal Hall-bar geometry enable us to accurately determine the carrier density. Measurements of the temperature (T) and density (n s ) dependence of the conductivity σ(T, n s ) demonstrate scaling behavior consistent with a metalinsulator quantum phase transition driven by electron-electron interactions, but where disorder-induced local magnetic moments are also present. Our findings pave the way for further studies of the fundamental quantum mechanical properties of 2D transition metal dichalcogenides using the same contact engineering.

2D materials↗
DOE OSTI2020

Variable spin-charge conversion across metal-insulator transition

The charge-to-spin conversion efficiency is a crucial parameter in determining the performance of many useful spintronic materials. Usually, this conversion efficiency is predetermined by the intrinsic nature of solid-state materials, which cannot be easily modified without invoking chemical or structural changes in the underlying system. Here we report on successful modulation of charge-spin conversion efficiency via the metal-insulator transition in a quintessential strongly correlated electron compound vanadium dioxide (VO2). By employing ferromagnetic resonance driven spin pumping and the inverse spin Hall effect measurement, we find a dramatic change in the spin pumping signal (decrease by > 80%) and charge-spin conversion efficiency (increase by five times) upon insulator to metal transition. The abrupt change in the structural and electrical properties of this material therefore provides useful insights on the spin related physics in a strongly correlated material undergoing a phase transition.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Zero-Strain Metal-Insulator Transition by the Local Fluctuation of Cation Dimerization

The coupled electronic and structural transitions in metal-insulator transition (MIT) hinder ultrafast switching and ultimate endurance. Decoupling these transitions and achieving a zero-strain electronic MIT can overcome the fundamental limitations of MIT in solid materials. Here, this study demonstrates that iso-valent Ti dopants in supercooled VO 2 epitaxial films cause MIT with minimal hysteresis without changing unit-cell volume and crystal symmetry. The Ti dopants in the VO 2 lattice locally alter the configuration of V-V pairs, where the long-range ordering in V-V pairs is disrupted, and the nano-domains of V-V dimers are formed. Strikingly, these local V-V dimers persist even above the electronic transition temperature (T MI ), facilitating the zero-strain electronic MIT with nanoscale structural heterogeneity. The geometrically compatible interface between insulating and metallic phases drastically enhances switching speed and endurance during electrically and optically driven zero-strain MIT. In conclusion, this discovery offers a fresh perspective on the scientific understanding of MIT and the improved functionality in terms of device speed and reliability by decoupling electronic and structural transitions.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Ligand Hole Driven Metal–Insulator Transition Exemplified in a Layered Transition Metal Oxide

The interplay of cooperative Jahn–Teller (JT) distortions and charge-disproportionation (CD) with a strong electronic correlation in transition metal oxides leads to structural symmetry breaking. Both JT and CD often manifest in the form of significant modifications in electronic and structural properties such as band splitting, metal–insulator transitions (MIT), and enhanced electron lattice interactions. Notably, the charge-disproportionation is a key electronic feature that drives the MIT. Here, we demonstrate and quantify it using first-principles calculations combining density-functional theory, dynamical mean-field theory, and spin–lattice Monte Carlo simulations. Taking Ca 2 FeMnO 6 as a prototypical example of a correlated oxide, our ab initio study shows that MIT in Ca 2 FeMnO 6 arises from the partial localization of oxygen ligand holes at alternate Fe sites that control both charge and magnetic ordering. Interestingly, the band gap was found to be fundamentally controlled by the strength of the charge-transfer energy and not by the Mott–Hubbard interactions. The novel physics and insights presented in this work reveal promising routes for tuning the electronic functionality in transition-metal oxides.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Percolation and nanosecond fluctuators in V 2 O 3 films within the metal–insulator transition

Vanadium sesquioxide (V 2 O 3 ) exhibits a metal–insulator transition (MIT) at 160 K between a low temperature, monoclinic, antiferromagnetic Mott insulator and a high temperature, rhombohedral, paramagnetic, metallic phase. In thin films, a percolative transition takes place over a finite temperature range of phase coexistence. We study the fluctuating dynamics of this percolative MIT by measuring voltage noise spectra at both low frequencies (up to 100 kHz) and radio frequencies (between 10 MHz and 1 GHz). Noise intensity quadratic in bias is observed in the MIT region, as expected for resistive fluctuations probed nonperturbatively by the current. The low frequency noise resembles flicker-type 1/f β noise, often taking on the form of Lorentzian noise dominated by a small number of fluctuators as the volume fraction of the insulating phase dominates. Radio frequency noise intensity also quadratic in the bias current allows the identification of resistance fluctuations with lifetimes below 1 ns, approaching timescales seen in non-equilibrium pump–probe studies of the transition. We find quantitative consistency with a model for fluctuations in the percolative fraction. The thermodynamics of the MIT suggests that dominant fluctuations are ones that alter small volumes affecting the connectivity of domain boundaries. This noise serves as a sensitive and nonperturbative probe for the dynamics of switching phenomena in this system.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Tunable magnons of an antiferromagnetic Mott insulator via interfacial metal-insulator transitions

Antiferromagnetic insulators present a promising alternative to ferromagnets due to their ultrafast spin dynamics essential for low-energy terahertz spintronic device applications. Magnons, i.e., quantized spin waves capable of transmitting information through excitations, serve as a key functional element in this paradigm. However, identifying external mechanisms to effectively tune magnon properties has remained a major challenge. Here we demonstrate that interfacial metal-insulator transitions offer an effective method for controlling the magnons of Sr 2 IrO 4 , a strongly spin-orbit coupled antiferromagnetic Mott insulator. Resonant inelastic x-ray scattering experiments reveal a significant softening of zone-boundary magnon energies in Sr 2 IrO 4 films epitaxially interfaced with metallic 4 d transition-metal oxides. Therefore, the magnon dispersion of Sr 2 IrO 4 can be tuned by metal-insulator transitions of the 4 d transition-metal oxides. We tentatively attribute this non-trivial behavior to a long-range phenomenon mediated by magnon-acoustic phonon interactions. Our experimental findings introduce a strategy for controlling magnons and underscore the need for further theoretical studies to better understand the underlying microscopic interactions between magnons and phonons.

magnetic properties and materials↗
DOE OSTI2024

Origin of metal-insulator transitions in the parent compounds of ruthenium-pnictide superconductors

Here we study the interplay of the structural phase transition, flat electronic band dispersion, and metal-to-insulator transition (MIT) in the parent compounds of the Ru-pnictide superconductors by using first-principles calculations. Our electron and phonon calculations reveal that Ru(P,As) undergo MIT accompanied by orthorhombic to monoclinic distortion at low temperature, but RuSb stays orthorhombic and metallic in agreement with the experimental findings. It is demonstrated that electronic correlation, as treated in DFT + U, DFT + Gutzwiller, and dynamical mean-field theory (DMFT), cannot induce MIT in the undistorted crystal structure. We find that, although small monoclinic distortion can remove the van Hove singularity at the Fermi level, it does not immediately gap out the Fermi surface and a large value of monoclinic distortion is necessary for a clear MIT, suggesting the possibility of an intermediate pseudogapped monoclinic metallic phase. Furthermore, we predict a light-induced two-step insulator-to-metal and structural transitions in the monoclinic phases of RuP and RuAs, which can be tested in future ultrafast pump-probe experiments as an alternative ideal playground to VO 2 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Local strain inhomogeneities during electrical triggering of a metal–insulator transition revealed by X-ray microscopy

Electrical triggering of a metal–insulator transition (MIT) often results in the formation of characteristic spatial patterns such as a metallic filament percolating through an insulating matrix or an insulating barrier splitting a conducting matrix. When MIT triggering is driven by electrothermal effects, the temperature of the filament or barrier can be substantially higher than the rest of the material. Using X-ray microdiffraction and dark-field X-ray microscopy, we show that electrothermal MIT triggering leads to the development of an inhomogeneous strain profile across the switching device, even when the material does not undergo a pronounced, discontinuous structural transition coinciding with the MIT. Diffraction measurements further reveal evidence of unique features associated with MIT triggering including lattice distortions, tilting, and twinning, which indicate structural nonuniformity of both low- and high-resistance regions inside the switching device. Such lattice deformations do not occur under equilibrium, zero-voltage conditions, highlighting the qualitative difference between states achieved through increasing temperature and applying voltage in nonlinear electrothermal materials. Electrically induced strain, lattice distortions, and twinning could have important contributions in the MIT triggering process and drive the material into nonequilibrium states, providing an unconventional pathway to explore the phase space in strongly correlated electronic systems.

42 ENGINEERING↗
DOE OSTI2020

Magnetic field frustration of the metal-insulator transition in V 2 O 3

Despite decades of efforts, the origin of metal-insulator transitions (MITs) in strongly correlated materials remains one of the main long-standing problems in condensed-matter physics. An archetypal example is V 2 O 3 , which undergoes simultaneous electronic, structural, and magnetic phase transitions. This remarkable feature highlights the many degrees of freedom at play in this material. In this work, acting solely on the magnetic degree of freedom, we reveal an anomalous feature in the electronic transport of V 2 O 3 : On cooling, the magnetoresistance changes from positive to negative values well above the MIT temperature, and shows divergent behavior at the transition. In this work, the effects are attributed to the magnetic field quenching antiferromagnetic fluctuations above the Néel temperature $T_N$, and preventing long-range antiferromagnetic ordering below $T_N$. In both cases, suppressing the antiferromagnetic ordering prevents the opening of the incipient electronic gap. This interpretation is supported by Hubbard model calculations which fully reproduce the experimental behavior. Our study sheds light on this classic problem providing a clear and physical interpretation of the nature of the metal-insulator transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Recent Advancements in Reconfigurable mmWave Devices Based on Phase-Change and Metal Insulator Transition Materials

Chalcogenide Phase Change Materials (PCM) and metal insulator transition (MIT) materials are a group of materials that are capable of switching between low resistance and high resistance states. These emerging materials have been widely used in optical storage media and memory devices. Over the past recent years, there have been interests in exploiting the PCM and MIT materials, especially germanium antimony telluride (GST) alloys and vanadium dioxide (VO 2 ), for radio frequency (RF) applications. The PCM and MIT-based RF devices are expected to bridge the gap between semiconductor switches and microelectromechanical system (MEMS) switches as they combine the low insertion loss performance of MEMS technology and the small size and reliability performance of semiconductor technology. This article presents an overview of the PCM and MIT materials for RF circuits and discusses the recent advancements in reconfigurable millimeter-wave (mmWave) devices based on PCM and MIT materials in depth.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Magnetically driven phonon instability enables the metal–insulator transition in h-FeS

Hexagonal iron sulfide exhibits a fascinating coexistence of metal–insulator, structural and magnetic transitions, reflecting an intimate interplay of its spin, phonon and charge degrees of freedom. Here, we show how a subtle competition of energetic and entropic free-energy components governs its thermodynamics and the sequence of phase transitions it undergoes upon cooling. By means of comprehensive neutron and X-ray scattering measurements, and supported by first-principles electronic structure simulations, we identify the critical role of the coupling between antiferromagnetic ordering and instabilities of anharmonic phonons in the metallic phase in driving the metal–insulator transition. The antiferromagnetic ordering enables the emergence of two zone-boundary soft phonons, whose coupling to a zone-centre mode drives the lattice distortion opening the electronic bandgap. Simultaneously, spin–lattice coupling opens a gap in the magnon spectrum that controls the entropy component of the metal–insulator transition free energy. Furthermore, these results reveal the importance of spin–phonon coupling to tune anharmonic effects, thus opening new avenues to design novel technologically important materials harbouring the metal–insulator transition and magnetoelectric behaviours.

36 MATERIALS SCIENCE↗
DOE OSTI2022

High-electric-field behavior of the metal-insulator transition in TiS3 nanowire transistors

We investigate the behavior of the metal-insulator transition (MIT) in TiS 3 nanowire field-effect transistors, in the strongly nonequilibrium limit that has, thus far, largely been neglected. Under high electric fields within the TiS 3 channel (≤115 kV/cm), we observe the emergence of a critical fixed point, separating insulating and metallic regions in the transfer curves of the device. The critical gate voltage that defines this fixed point evolves systematically with the drain bias (field), allowing us to map out a phase diagram that identifies the conditions for metallicity or for insulating behavior. Dependent upon the choice of the gate voltage used to tune the carrier concentration in the nanowire, the existence of the field-induced MIT allows the TiS 3 to be either insulating or metallic over an extensive range of temperature. The possible connection of this strongly nonequilibrium state to some form of charge density wave is discussed.

2D materials↗
DOE OSTI2020

Doping a bad metal: Origin of suppression of the metal-insulator transition in nonstoichiometric VO 2

Rutile ( R ) phase VO 2 is a quintessential example of a strongly correlated bad metal, which undergoes a metal-insulator transition (MIT) concomitant with a structural transition to a V-V dimerized monoclinic ( M 1 ) phase below T MIT ~ 340 K . It has been experimentally illustrated that one can control this transition by doping VO 2 . In particular, doping with oxygen vacancies ( V O ) has been shown to completely suppress this MIT without any structural transition. We explain this suppression by elucidating the influence of oxygen vacancies on the electronic structure of the metallic R phase VO 2 , explicitly treating strong electron-electron correlations using dynamical mean-field theory (DMFT) as well as diffusion Monte Carlo (DMC) flavor of quantum Monte Carlo (QMC) techniques. DMC calculations show a gap closure in the M 1 phase when vacancies are present, suggesting that when vacancies are introduced in the high-temperature rutile phase, the dimerized insulating phase cannot be reached when temperature is lowered. Both DMFT and DMC calculations of nonstoichiometric metallic rutile phase shows that this tendency not to dimerize in the presence of vacancies is because V O 's tend to change the V - 3 d filling away from its nominal half-filled value, with the e g π orbitals competing with the otherwise dominant a 1 g orbital. Loss of this near orbital polarization of the a 1 g orbital is associated with a weakening of electron correlations, especially along the V-V dimerization direction. This removes a charge-density wave (CDW) instability along this direction above a critical doping concentration, which further suppresses the metal-insulator transition. Our research further suggests that the MIT is predominantly driven by a correlation-induced CDW instability along the V-V dimerization direction.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Dynamic control of nonequilibrium metal-insulator transitions

Here, we demonstrate a first order metal-insulator phase transition in the repulsive, fully frustrated, single-band Hubbard model as a function of the coupling to a fermion bath. Time dependent manipulation of the bath coupling allows switching between metallic and insulating states both across the phase transition and within the coexistence region. We propose a simple nanoelectronic device for experimentally realizing dynamic control of the bath coupling. Analysis of the device characteristics shows that it can act as a two-terminal memristor.

36 MATERIALS SCIENCE↗