Search NASA⌕ Search

SEARCH · Search NASA

Results for “Methane partial oxidation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Partial Oxidation of Methane to Synthesis Gas Using Supported Ga-Containing Bimetallic Catalysts and a Ti-Promoter

A series of bimetallic Ga-containing materials using TiO 2 and TiO 2 -promoted SiO 2 supports have been prepared. Rhodium, palladium, and platinum have been used as additional metals in this system. The materials are characterized and used as catalysts for the partial oxidation of methane into synthesis gas (H 2 and CO). The presence of a low quantity of titanium in the form of anatase TiO 2 was shown to improve the overall activity of catalytic methane oxidation and to strongly increase the selectivity of partial oxidation products over the total oxidation of methane to carbon dioxide and water. Here, particular attention is paid to the formation of gallium-metal alloys on the surface of the catalyst supports. Rh-Ga-Ti-SiO 2 was found to be the most active and selective catalyst, giving 89 % conversion of methane and 99 % selectivity to synthesis gas at 750 °C, as well as exhibiting catalytic activity and preferential conversion to partial oxidation products at temperatures as low as 350 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temperature evolution on Rh/Al{sub 2}O{sub 3} catalyst during partial oxidation of methane in a reverse flow reactor

Catalytic partial oxidation of methane was investigated in a reverse flow reactor with commercial Rh/Al{sub 2}O{sub 3} catalyst in pellets. The process is carried out in a catalytic fixed bed reactor and switching of feed flow direction is obtained through four electrovalves synchronized in pairs. Temperature profile along the catalyst bed was measured by fast IR thermography and product composition was measured with a continuous gas analyzer. Feed direction switching time, water to methane ratio and inert section length were investigated as process parameters. Data of catalyst bed temperature evolution during the flow cycle are presented, discussed and related to reactor performance as a function of reverse flow switching period. The effect of water addition to the reacting mixture on the dynamics of catalyst bed temperature evolution is also presented. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Manganese Catalyzed Partial Oxidation of Light Alkanes

The catalytic partial oxidation of methane is achieved at low temperatures (<200 °C) using manganese oxides and manganese salts in mixtures of trifluoroacetic acid and trifluoroacetic anhydride. Dioxygen is used as the in situ terminal oxidant. For Mn oxides (e.g., MnO 2 , Mn 2 O 3 , and Mn 3 O 4 ), we studied stoichiometric methane partial oxidation in HTFA (TFA = trifluoroacetate). Using a Mn trifluoroacetate salt, at 180 °C and under 25 psig of methane, product selectivity for the mono-oxidized product methyl trifluoroacetate (MeTFA) is observed to be >90% at ~35% methane conversion at approximately 6 turnovers. Under our catalytic methane oxidation reaction conditions, MeTFA is stable against overoxidation, which explains the likely high selectivity at conversions >15%. Using combined experimental studies and DFT calculations, a mechanism involving soluble and molecular Mn species in the catalytic cycle is proposed. The proposed reaction pathway involves initial activation of Mn II by dioxygen, cleavage of a methane C–H bond by a Mn III hydroxo intermediate, rebound of the methyl radical to generate MeTFA, and finally regeneration of the starting Mn II complex. Also, this process is shown to be applicable to the oxidation of ethane, favoring the mono-oxidized product ethyl trifluoroacetate (EtTFA) and reaching ~46% conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metal ferrite oxygen carriers/catalyst for partial oxidation of methane for production of synthesis gas

Materials, methods to prepare, and methods of use for partial oxidation of methane. Embodiments include delivering a metal ferrite oxygen carrier to a fuel reactor, wherein the metal ferrite oxygen carrier comprises MFexOy where 1.ltoreq.x.ltoreq.3 and 3.ltoreq.y.ltoreq.5, and where M comprise a Group II alkali earth metals; and delivering a gaseous stream that contains methane to the metal ferrite oxygen carrier in the fuel reactor and maintaining the fuel reactor at a reducing temperature sufficient to reduce some portion of the metal ferrite oxygen carrier and oxidize some portion of the methane containing gas stream. Embodiments further include generating gaseous products containing H.sub.2 and CO gas in the fuel reactor; withdrawing a product stream from the fuel reactor, where the gaseous products comprise the product stream, and where at least >50 vol. % of the product stream includes CO and H.sub.2; oxidizing the reduced carrier in an oxidizing reactor by contacting the reduced carrier and an oxidizing gas at an oxidizing temperature, where the oxidizing gas is comprised of oxygen, and where the oxidizing temperature is sufficient to generate an oxidizing reaction, where the reactants of the oxidizing reaction comprise some portion of the oxygen, some portion of the M component, and some portion of the FecOd component, and further wherein the product of the oxidizing reaction is a re-oxidized carrier that comprises some portion of the MFexOy; and delivering heat generated in the oxidizing reactor to the fuel reactor for the reaction of metal ferrite with methane.

36 MATERIALS SCIENCE↗

Dynamic Multinuclear Active Sites Formed from Mobilized Single Atoms on Heterogeneous Supports for Selective Oxidation Catalysis

The overarching goal of this DOE project is to carry out fundamental kinetic and mechanistic studies of selective oxidation catalysis, focusing on partial methane oxidation to methanol, to provide scientific insight into the nature of the active sites, reaction mechanisms, and catalytic phenomena that enable inorganic solids to use dioxygen (or air) as an oxidant at mild temperatures, and to carry out selective oxidations in highly oxidizing environments. The scientific challenges this research will address are related to the requirements of (1) facilitating pathways to regenerate active forms of metal binding sites after one turnover, (2) designing inorganic supports capable of utilizing larger fractions of their binding sites that are capable of activating O 2 , and (3) finding mechanisms to recover binding sites from deactivated phases. Our main strategy in this project is to study metal-zeolite catalysts containing ionically-tethered mononuclear metal ion sites, which can react with O 2 to reversibly form binuclear and multinuclear Ox-bridged metal active sites for continuous partial methane oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrogen production over Ni/ceria-supported catalysts by partial oxidation of methane

The catalytic performance of Ni dispersed on ceria-doped supports, (Ce0.88La0.12) O2-x, (Ce0.91Gd0.09) O2-x, (Ce0.71Gd0.29) O2-x, (Ce0.56Zr0.44) O2-x and pure ceria, was tested for the catalytic partial oxidation of Methane (CPOX). The catalysts were characterized by Brunauer Emmett Teller (BET), X-ray diffraction (XRD), temperature programmed reduction (TPR) and temperature programmed oxidation (TPO). Ni/ (Ce0.56Zr0.44) O2-x showed higher Hydrogen production than the Ni/Gadolinium-doped catalysts, which may be due to its higher reducibility and surface area. By enhancing the support reducibility in Ni/dopedceria catalysts, their catalytic activity is promoted because the availability of surface lattice oxygen is increased, which can participate in the formation of CO and H2. It was also found that Ni/(Ce0.56Zr0.44) O2-x showed higher catalytic performance after redox pretreatments. Similarly, a higher amount of H2 or O2 was consumed during hydrogenation and oxidation pretreatments, respectively. This may be correlated to re-dispersion of metallic particles and changes on the metal-support interface. In addition, it was observed that the ionic conductivity of Ni/(Ce0.56Zr0.44) O2-x had an effect on the amount of carbon formed during the CPOX reaction at oxygen concentrations lower than the stoichiometric required, O/C ratios lower than 0.6. Its high oxygen mobility may have accelerated the surface oxidation reactions of carbon by reactive oxygen species, thus, inhibiting carbon growth on the catalyst surface

Partial oxidation of methane Redox treatment Nicke↗

Integrated in situ spectroscopic studies on syngas production from partial oxidation of methane catalyzed by atomically dispersed rhodium cations on ceria

Catalytic reforming of methane to produce syngas is an important strategy for producing value-added chemicals. The conventional reforming catalyst relies on supported nickel nanoparticles. Here, in this work, we investigated singly dispersed Rh cations anchored on a CeO 2 catalyst (Rh 1 /CeO 2 ) for high activity and selectivity towards the production of syngas via partial oxidation of methane (POM) in the temperature range of 600–700 °C. The yields of H 2 and CO at 700 °C are 83% and 91%, respectively. The anchored Rh 1 atoms on CeO 2 of Rh 1 /CeO 2 are in the cationic state, and on an average each Rh 1 atom coordinates with 4–5 surface lattice oxygen atoms of CeO 2 . Compared to inert CeO 2 for POM, via the incorporation of single-atom sites, Rh 1 modifies the electronic state of oxygen atoms proximal to the Rh 1 atoms and thus triggers the catalytic activity of CeO 2 . The high activity of single-atom catalyst Rh 1 /CeO 2 suggests that the incorporation of single atoms of transition metals to the surface of a reducible oxide can modulate the electronic state of proximal anions of the oxide support toward forming an electronic state favorable for the selective formation of ideal products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mixed conductive composites for ‘Low-Temperature’ thermo-chemical CO 2 splitting and syngas generation

An effective strategy to design platinum group metal (PGM) free redox catalysts for “low temperature” CO 2 splitting followed with methane partial oxidation was proposed and validated. Composites of mixed ionic-electronic conductive (MIEC) oxides were found to be highly effective at relatively low temperatures (600–750 °C). Specifically, perovskite structured LaNi 0.35 Fe 0.65 O 3 and rock salt structured Ce 0.85 Gd 0.1 Cu 0.05 O 2–δ , as two compatible yet structurally distinct MIEC oxides, were integrated into composite redox catalyst particles. Resulting from the synergistic effect of the two MIEC phases, 90% CO 2 to CO conversion was demonstrated at 750 °C. Up to 90% methane conversion with 96% CO selectivity was also achieved in the methane POx step. The redox catalysts were characterized in detail to illustrate the underlying mechanisms for the synergistic effects. Electrical conductivity relaxation (ECR) measurements indicated significantly lowered activation energy for lattice oxygen (O 2– ) migration (0.43 eV). The enhanced oxygen migration in turn led to reversible exsolution of active transition metal nanoparticles (Ni–Fe alloy) from the mixed oxide, serving as active sites for methane activation while further enhancing lattice oxygen exchange, as confirmed by in situ X-ray diffraction and transmission electron microscopy. In conclusion, the composite redox catalysts demonstrate superior redox activity, coke resistance, and long term redox stability, making them potentially suitable for CO 2 utilization and methane partial oxidation under a hybrid redox process scheme.

03 NATURAL GAS↗

Composite Mixed Ionic-electronic Conducting Materials for Low-Temperature Thermochemical CO 2 Splitting and Syngas Generation

An effective strategy to design platinum group metal (PGM) free redox catalysts for “low temperature” CO 2 splitting followed with methane partial oxidation was proposed and validated. Composites of mixed ionic-electronic conductive (MIEC) oxides were found to be highly effective at relatively low temperatures (600–750 °C). Specifically, perovskite structured LaNi 0.35 Fe 0.65 O 3 and rock salt structured Ce 0.85 Gd 0.1 Cu 0.05 O 2-δ , as two compatible yet structurally distinct MIEC oxides, were integrated into composite redox catalyst particles. Resulting from the synergistic effect of the two MIEC phases, 90% CO 2 to CO conversion was demonstrated at 750 °C. Up to 90% methane conversion with 96% CO selectivity was also achieved in the methane POx step. The redox catalysts were characterized in detail to illustrate the underlying mechanisms for the synergistic effects. Electrical conductivity relaxation (ECR) measurements indicated significantly lowered activation energy for lattice oxygen (O 2- ) migration (0.43 eV). The enhanced oxygen migration in turn led to reversible exsolution of active transition metal nanoparticles (Ni–Fe alloy) from the mixed oxide, serving as active sites for methane activation while further enhancing lattice oxygen exchange, as confirmed by in situ X-ray diffraction and transmission electron microscopy. As a result, the composite redox catalysts demonstrate superior redox activity, coke resistance, and long term redox stability, making them potentially suitable for CO 2 utilization and methane partial oxidation under a hybrid redox process scheme.

Jiang, Qiongqiong↗

Role of catalytic nitrile decomposition in tricopper complex mediated direct partial oxidation of methane to methanol

Synthetic homogeneous system known to date performing methane to methanol conversion using O 2 as terminal oxidant is unique and based on copper complex with piperazine-based ligand (Cu 3 L in Fig. 1) in a medium of acetonitrile. Prior work have shown that in order to achieve catalytic turnover, hydrogen peroxide is needed to regenerate the active site. We show in this paper that reaction solvent based on organic nitrile decompose concurrently with methane activation and that in the absence of either acetonitrile, Cu complex or hydrogen peroxide, the catalytic turnover does not happen. We show in this manuscript that the direct methane oxidation to methanol might have been mediated by catalytic Radziszewski oxidation between acetonitrile and H 2 O 2 . Additionally we have discovered that in the absence of methane, peroxide mediated acetonitrile decomposition also makes methanol via a background reaction which was hitherto unknown.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Partial oxidation of methane to methanol on boron nitride at near critical acetonitrile

Abstract Direct catalytic conversion of methane to methanol with O 2 has been a fundamental challenge in unlocking abundant natural gas supplies. Metal-free methane conversion with 17% methanol yield based on the limiting reagent O 2 at 275 °C was achieved with near supercritical acetonitrile in the presence of boron nitride. Reaction temperature, catalyst loading, dwell time, methane–oxygen molar ratio, and solvent-oxygen molar ratios were identified as critical factors controlling methane activation and the methanol yield. Extension of the study to ethane (C2) showed moderate yields of methanol (3.6%) and ethanol (4.5%).

03 NATURAL GAS↗