Search NASA⌕ Search

SEARCH · Search NASA

Results for “Microscopic order”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Precision-controlled ultrafast electron microscope platforms. A case study: Multiple-order coherent phonon dynamics in 1T-TaSe2 probed at 50 fs–10 fm scales

We report on the first detailed beam tests attesting the fundamental principle behind the development of high-current-efficiency ultrafast electron microscope systems where a radio frequency (RF) cavity is incorporated as a condenser lens in the beam delivery system. To allow for the experiment to be carried out with a sufficient resolution to probe the performance at the emittance floor, a new cascade loop RF controller system is developed to reduce the RF noise floor. Temporal resolution at 50 fs in full-width-at-half-maximum and detection sensitivity better than 1% are demonstrated on exfoliated 1T-TaSe2 system under a moderate repetition rate. To benchmark the performance, multi-terahertz edge-mode coherent phonon excitation is employed as the standard candle. The high temporal resolution and the significant visibility to very low dynamical contrast in diffraction signals via high-precision phase-space manipulation give strong support to the working principle for the new high-brightness femtosecond electron microscope systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Microscopic insights into long-range 1D ordering in a dense semi-disordered molecular overlayer

In this work, the formation of a two-phase surface molecular overlayer that transitions from isolated propene molecules to a highly ordered 1D chain structure on Cu(111) is elucidated through combined high-resolution STM imaging and DFT-based calculations. These models reveal how disordered molecules present in-between the 1D chains stabilizes the system as a whole.

09 BIOMASS FUELS↗
DOE OSTI2022

Phonon-assisted formation of an itinerant electronic density wave

Abstract Electronic instabilities drive ordering transitions in condensed matter. Despite many advances in the microscopic understanding of the ordered states, a more nuanced and profound question often remains unanswered: how do the collective excitations influence the electronic order formation? Here, we experimentally show that a phonon affects the spin density wave (SDW) formation after an SDW-quench by femtosecond laser pulses. In a thin film, the temperature-dependent SDW period is quantized, allowing us to track the out-of-equilibrium formation path of the SDW precisely. By exploiting its persistent coupling to the lattice, we probe the SDW through the transient lattice distortion, measured by femtosecond X-ray diffraction. We find that within 500 femtoseconds after a complete quench, the SDW forms with the low-temperature period, directly bypassing a thermal state with the high-temperature period. We argue that a wavevector-matched phonon launched by the quench changes the formation path of the SDW through the dynamic pinning of the order parameter.

42 ENGINEERING↗
DOE OSTI2020

The Physics of Pair-Density Waves: Cuprate Superconductors and Beyond

Herein we review the physics of pair-density wave (PDW) superconductors. We begin with a macroscopic description that emphasizes order induced by PDW states, such as charge-density wave, and discuss related vestigial states that emerge as a consequence of partial melting of the PDW order. We review and critically discuss the mounting experimental evidence for such PDW order in the cuprate superconductors, the status of the theoretical microscopic description of such order, and the current debate on whether the PDW is a mother order or another competing order in the cuprates. In addition, we give an overview of the weak coupling version of PDW order, Fulde–Ferrell–Larkin–Ovchinnikov states, in the context of cold atom systems, unconventional superconductors, and noncentrosymmetric and Weyl materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Dynamical Correlations and Order in Magic-Angle Twisted Bilayer Graphene

The interplay of dynamical correlations and electronic ordering is pivotal in shaping phase diagrams of correlated quantum materials. In magic-angle twisted bilayer graphene, transport, thermodynamic, and spectroscopic experiments pinpoint a competition between distinct low-energy states with and without electronic order, as well as between localized and delocalized charge carriers. In this study, we utilize dynamical mean-field theory on the topological heavy fermion model of twisted bilayer graphene to investigate the emergence of electronic correlations and long-range order in the absence of strain. We contrast moment formation, Kondo screening, and ordering on a temperature basis and explain the nature of emergent correlated states based on three central phenomena: (i) the formation of local spin and valley isospin moments around 100 K, (ii) the ordering of the local isospin moments around 10 K preempting Kondo screening, and (iii) a cascadic redistribution of charge between localized and delocalized electronic states upon doping. At integer fillings, we find that low-energy spectral weight is depleted in the symmetric phase, while we find insulating states with gaps enhanced by exchange coupling in the zero-strain ordered phases. Doping away from integer filling results in distinct metallic states: a “bad metal” above the ordering temperature, where scattering off the disordered local moments suppresses electronic coherence, and a “good metal” in the ordered states with coherence of quasiparticles facilitated by isospin order. This finding reveals coherence from order as the microscopic mechanism behind the Pomeranchuk effect observed experimentally by Rozen [] and by Saito []. Upon doping, there is a periodic charge reshuffling between localized and delocalized electronic orbitals leading to cascades of doping-induced Lifshitz transitions, local spectral weight redistributions, and periodic variations of the electronic compressibility ranging from nearly incompressible to negative. Our findings highlight the essential role of charge transfer, hybridization, and ordering in shaping the electronic excitations and thermodynamic properties in twisted bilayer graphene and provide a unified understanding of the most puzzling aspects of scanning tunneling spectroscopy, transport, and compressibility experiments. Published by the American Physical Society 2024

Physics↗
DOE OSTI2021

Kinetically Controlled Formation of Semi-crystalline Conjugated Polymer Nanostructures

Conjugated polymer (CP) materials that are considered as an attractive choice for various electronic and optoelectronic applications possess highly heterogeneous complex structures that can span several orders of magnitude in length scale. This is due to the intricate coupling effects of weak secondary interactions and entropic forces that determine molecular organization in bulk polymer materials. Understanding the influence of molecular interactions on the emergence and evolution of nano- and microscale structures is of paramount importance to the guided design and development of condensed CP materials. Such understanding is even more critical for the rational design of hierarchical systems away from equilibrium, where weak molecular interactions can guide the system along competing kinetic pathways toward local energy minima and metastable architectures. In this work, we studied a promising concept for accessing various kinetically stabilized semi-crystalline CP nanostructures that are formed in the process of controlled chain-growth Kumada catalyst-transfer polymerization initiated by a small-molecule catalytic species which can exist in equilibrium between free and aggregated states. Specifically, we chose a small-molecule perylenedicarboximide (PDCI) polymerization catalytic initiator which has a strong tendency toward reversible supramolecular assembly–disassembly that can be controlled by temperature. Addition of a thiophene monomer to a solution of the PDCI initiator starts the chain-growth polymerization process, which produces distinct nanoscale semi-crystalline polythiophene structures formed under predominant kinetic control. Furthermore, we demonstrated that, depending on the reaction temperature (which affects the fine balance between the position of PDCI assembly–disassembly equilibrium, rate of polymerization, and solvent–solute interactions for the growing polythiophene chains), a range of kinetically trapped hierarchically organized semi-crystalline CP systems with substantially varying optoelectronic properties could be obtained. In addition to spectroscopic and electron microscopic studies, in order to better reveal the structural aspects of the generated polymer nanoscale systems, we carried out a series of X-ray diffraction and neutron scattering experiments which indicated complex hierarchical organization in these kinetically stabilized CP assembled materials. We expect that this in situ polymerization-based approach can lead to a general way to expand access to various semi-crystalline CP nanostructured materials with broadly tunable electronic and optical properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Elucidating Arsenic and Selenium Speciation in Coal Fly Ashes

Coal fly ash (CFA) is produced during the coal combustion process and contains trace elements (<100 ppm) including selenium (Se) and arsenic (As), both detrimental for environmental and human health. Existing management strategies for CFAs involve disposal in landfills and ash ponds, as well as beneficial usage in other applications such as in concrete. Both the direct disposal and beneficial usage of CFA raise concerns for environmental hazards due to the potential leaching of Se and As. CFAs were classified as reusable material by the U.S. Environmental Protection Agency (EPA) with the first federal regulation (Disposal of Coal Combustion Residuals from Electric Utilities, CCR) for its disposal established six years ago. During coal combustion process, parameters such as furnace firing type, emissions controls, coal rank, use of additives, and particulate matter controls, could contribute to significant variability in As/Se concentrations and their speciation. Although there have been a handful of studies on As/Se speciation on small sets of samples, they do not fully represent the current state of coal-fired electrical generating units. Little information exists on the detailed speciation (e.g. oxidation state, complexation state) of As/Se in large set of fly ash samples. To better investigate the role of the potential contributing parameters, a large-scale survey study with representative samples of typical coal source and combustion conditions is highly desired. The overall goal of this research is to systematically characterize As and Se speciation of representative coal fly ash samples using state-of-the-art synchrotron based spectroscopic and microscopic techniques, in order to develop a correlation between coal source/type, operation condition, As/Se speciation, and As/Se mobility. A detailed survey study was conducted documenting the current state-of-knowledge on fossil power generating units as a function of coal type/source, operating conditions, environmental control systems, additive use, and fly ash handling methods. Based on this survey, a matrix of fly ash samples representing a range of conditions were chosen and collected. The collected ash samples were analyzed for bulk characteristics such as elemental composition, microstructure, chemical and mineralogical composition, surface area, and particle size distribution. State-of-the-art synchrotron X-ray microscopy and spectroscopy techniques were applied to reveal the molecular scale speciation information of As and Se, such as oxidation state, association with other elements/minerals, and complexation states.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2024

Cation Migration and LSCF/SDC Decomposition Related to Long-Term Operation Mode as Revealed by Electron Microscopy

This study utilized energy dispersive spectroscopy (EDS) in a scanning electron microscope (SEM) and a scanning transmission electron microscope (STEM) in order to track cation migration and related particle decomposition for air electrode components of solid oxide cells. The influence of a Sm-doped ceria (SDC) barrier layers was assessed for three operation modes (fuel cell, electrolysis, reversible) over long time periods (1000-1500 hours). Composition profiles across air electrode/electrolyte interfaces indicated negligible accumulation of La/Sr cations to the yttria-stabilized zirconia (YSZ) electrolyte during operation. Instead, air electrode particles composed of SDC and/or La-Sr-Co-Fe-oxides (LSCF) exhibited decomposition by Sr evaporation and Sm migration to LSCF particle edges.

Picard, Yoosuf↗
DOE OSTI2022

Presence of Induced Weak Ferromagnetism in Fe-Substituted YFe x Cr 1–x O 3 Crystalline Compounds

Fe-substituted YFe x Cr 1–x O 3 crystalline compounds show promising magnetic and multiferroic properties. Here we report the synthesis and characterization of several compositions from this series. Using the autocombustion route, various compositions (x = 0.25, 0.50, 0.6, 0.75, 0.9, and 1) were synthesized as high-quality crystalline powders. In order to obtain microscopic and atomic information about their structure and magnetism, characterization was performed using room temperature X-ray diffraction and energy dispersion analysis as well as temperature-dependent neutron diffraction, magnetometry, and 57 Fe Mössbauer spectrometry. Rietveld analysis of the diffraction data revealed a crystallite size of 84 (8) nm for YFeO 3 , while energy dispersion analysis indicated compositions close to the nominal compositions. The magnetic results suggested an enhancement of the weak ferromagnetism for the YFeO 3 phase due to two contributions. First, a high magnetocrystalline anisotropy was associated with the crystalline character that favored a unique high canting angle of the antiferromagnetic phase (13°), as indicated by the neutron diffraction analysis. This was also evidenced by the high magnetic hysteresis curves up to 90 kOe by a remarkable high critical coercivity value of 46.7 kOe at room temperature. Second, the Dzyaloshinskii–Moriya interactions between homogenous and heterogeneous magnetic pairs resulted from the inhomogeneous distribution of Fe 3+ and Cr 3+ ions, as indicated by 57 Fe Mössbauer studies. Together, these results point to new methods of controlling the magnetic properties of these materials.

36 MATERIALS SCIENCE↗
NASA NTRS1971

Basic failure mechanisms in advanced composites

Fundamental failure mechanisms in carbon-epoxy composites were studied for more reliable prediction of the performance of these materials. Single and multiple fiber specimens were tested under tensile loads, and the sequence of failure events was observed. Parameters such as resin crack sensitivity, fiber surface treatment and variations in fibers from batch to batch are being evaluated. The analysis of bulk composite fracture processes using acoustic emission techniques is being studied in order to correlate microscopic observations with bulk composite behavior. Control of the fracture process through matrix and interface modification is being attempted, and study of failure processes in composite/metal specimens is being conducted. Most of the studies involved DEN 438 epoxy novolac as the matrix, but some experiments are now underway using the higher temperature resin ERLA 4617.

Mullin, J. V.↗
NASA NTRS1996

Microscopic optical model calculations of 4He, 12C-nucleus absorption cross sections

Calculations of absorption cross sections using a microscopic first-order optical potential for heavy-ion scattering are compared with experiments. In-medium nucleon-nucleon (NN) cross sections were used to calculate the two-body scattering amplitude. A medium-modified first-order optical potential was obtained for heavy-ion scattering using the in-medium two-body scattering amplitude. A partial wave expansion of the Lippmann-Schwinger equation in momentum space was used to calculate the absorption cross sections for various systems. The results are presented for the absorption cross sections for 4He-nucleus and 12C-nucleus scattering systems and are compared with the experimental values in the energy range 18-83A MeV. The use of the in-medium NN cross sections is found to result in significant reduction of the free space absorption cross sections in agreement with experiment.

NASA Discipline Radiation Health↗
NASA NTRS2016

Experimentally Observed Electrical Durability of 4H-SiC JFET ICs Operating from 500 C to 700 C

Prolonged 500 degrees Celsius to 700 degrees Celsius electrical testing data from 4H-SiC junction field effect transistor (JFET) integrated circuits (ICs) are combined with post-testing microscopic studies in order to gain more comprehensive understanding of the durability limits of the present version of NASA Glenn's extreme temperature microelectronics technology. The results of this study support the hypothesis that T ≥ 500 degrees Celsius durability-limiting IC failure initiates with thermal-stress-related crack formation where dielectric passivation layers overcoat micron-scale vertical features including patterned metal traces.

high temperature↗
NASA NTRS2008

Effect of Microscopic Damage Events on Static and Ballistic Impact Strength of Triaxial Braid Composites

In previous work, the ballistic impact resistance of triaxial braided carbon/epoxy composites made with large flat tows (12k and 24k) was examined by impacting 2 X2 X0.125" composite panels with gelatin projectiles. Several high strength, intermediate modulus carbon fibers were used in combination with both untoughened and toughened matrix materials. A wide range of penetration thresholds were measured for the various fiber/matrix combinations. However, there was no clear relationship between the penetration threshold and the properties of the constituents. During some of these experiments high speed cameras were used to view the failure process, and full-field strain measurements were made to determine the strain at the onset of failure. However, these experiments provided only limited insight into the microscopic failure processes responsible for the wide range of impact resistance observed. In order to investigate potential microscopic failure processes in more detail, quasi-static tests were performed in tension, compression, and shear. Full-field strain measurement techniques were used to identify local regions of high strain resulting from microscopic failures. Microscopic failure events near the specimen surface, such as splitting of fiber bundles in surface plies, were easily identified. Subsurface damage, such as fiber fracture or fiber bundle splitting, could be identified by its effect on in-plane surface strains. Subsurface delamination could be detected as an out-of-plane deflection at the surface. Using this data, failure criteria could be established at the fiber tow level for use in analysis. An analytical formulation was developed to allow the microscopic failure criteria to be used in place of macroscopic properties as input to simulations performed using the commercial explicit finite element code, LS-DYNA. The test methods developed to investigate microscopic failure will be presented along with methods for determining local failure criteria that can be used in analysis. Results of simulations performed using LS-DYNA will be presented to illustrate the capabilities and limitations for simulating failure during quasi-static deformation and during ballistic impact of large unit cell size triaxial braid composites.

Littell, Justin D.↗
DOE OSTI2025

Synthetic active liquid crystals powered by acoustic waves.

Active nematic materials combine orientational order with activity at the microscopic level. Current experimental realizations of active nematics include vibrating elongated particles, cell layers, suspensions of elongated bacteria, and a mixture of bio-filaments with molecular motors. The majority of active nematics are of biological origin. The realization of a fully synthetic active liquid crystal comprised of a lyotropic chromonic liquid crystal energized by ultrasonic waves, is reported. This synthetic active liquid crystal is free from biological degradation and variability, exhibits phenomenology associated with active nematics, and enables precise and rapid activity control over a significantly extended range. It is demonstrated that the energy of the acoustic field is converted into microscopic extensile stresses disrupting long-range nematic order and giving rise to an undulation instability and proliferation of topological defects. The emergence of unconventional free-standing persistent vortices in the nematic director field at high activity levels is revealed. The results provide a foundation for the design of externally energized active liquid crystals with stable material properties and tunable topological defect dynamics crucial for the realization of reconfigurable microfluidic systems.

active matter↗
NASA NTRS1991

X ray microscope assembly and alignment support and advanced x ray microscope design and analysis

Considerable efforts have been devoted recently to the design, analysis, fabrication, and testing of spherical Schwarzschild microscopes for soft x ray application in microscopy and projection lithography. The spherical Schwarzschild microscope consists of two concentric spherical mirrors configured such that the third order spherical aberration and coma are zero. Since multilayers are used on the mirror substrates for x ray applications, it is desirable to have only two reflecting surfaces in a microscope. In order to reduce microscope aberrations and increase the field of view, generalized mirror surface profiles have been considered in this investigation. Based on incoherent and sine wave modulation transfer function (MTF) calculations, the object plane resolution of a microscope has been analyzed as a function of the object height and numerical aperture (NA) of the primary for several spherical Schwarzschild, conic, and aspherical head reflecting two mirror microscope configurations.

Shealy, David L.↗
DOE OSTI2023

Current-induced switching of thin film α - Fe 2 O 3 devices imaged using a scanning single-spin microscope

Electrical switching of Néel order in an antiferromagnetic insulator is desirable as a basis for memory applications. Unlike electrically driven switching of ferromagnetic order via spin-orbit torques, electrical switching of antiferromagnetic order remains poorly understood. Here we investigate the low-field magnetic properties of 30-nm-thick, c-axis-oriented α-Fe 2 ⁢O 3 Hall devices using a diamond nitrogen-vacancy center scanning microscope. Using the canted moment of α-Fe 2⁢ O 3 as a magnetic handle on its Néel vector, we apply a saturating in-plane magnetic field to create a known initial state before letting the state relax in low field for magnetic imaging. Here, we repeat this procedure for different in-plane orientations of the initialization field. We find that the magnetic field images are characterized by stronger magnetic textures for fields along [$\overline{11}$20] and 11$\overline{2}$0, suggesting that despite the expected 3-fold magnetocrystalline anisotropy, our α-Fe 2 ⁢O 3 thin films have an overall in-plane uniaxial anisotropy. We also study current-induced switching of the magnetic order in α-Fe 2 ⁢O 3 . We find that the fraction of the device that switches depends on the current pulse duration, amplitude, and direction relative to the initialization field.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Charge Correlations in Cuprate Superconductors

High-temperature superconductivity, with transition temperatures up to ≈134 K at ambient pressure, occurs in layered cuprate compounds. The conducting CuO 2 planes, which are universally present, are responsible for the superconductivity but also show a disposition to other competing states including spin and charge order. Charge-density-wave (CDW) order appears to be a universal property of cuprate superconductors. It has been studied via a multitude of probes including X-ray and neutron scattering, nuclear magnetic resonance, scanning probe techniques, electronic transport, and quantum oscillations. Here, we review the microscopic properties of the CDW order. We discuss the nature of the ordered state, that is, its symmetry and microscopic structure. Furthermore, we show how the CDW order is related to quenched disorder, host structure, symmetry breaking perturbations, and magnetic fields. Here, we also describe measurements of dynamic collective charge excitations that are closely related to the quasi-static CDW order. Finally, we highlight some of the debated issues in the field, including the origin of the CDW order, the relationship to spin order, and the nature of the spatial CDW correlations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗