SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This report describes critical mineral/rare earth element resources, including Gulf Coast coal resources, and waste streams including coal ash from power plants, red mud from alumina processing, heavy mineral concentrates from sand mining industry, zeolite, graphite, and produced water with oil and gas.
Brine heated in solar pond dissolves minerals from deposits. In proposed solution-mining process, hot brine is pumped down one well and recovered at one or more other wells. Emerging brine is rich in desired mineral. Brine is evaporated in solar ponds to recover mineral.
This study presents a high-efficiency electrochemical process for the mineralization of calcium carbonate (CaCO 3 ) from mildly acidic mine tailing supernatant water. Electrochemical pH control was used to promote carbonate speciation and precipitation from CO 2 -saturated solutions, achieving >1 mol CaCO 3 precipitated per mol e - at applied potentials between -1.4 and -1.6 V vs Ag/AgCl. Product morphology and polymorph selectivity were tunable via applied potential, yielding calcite and vaterite phases. Experiments using real mine tailings water confirmed selective calcite precipitation, despite the presence of sulfate and other trace elements. These results highlight a viable route for coupling CO 2 utilization with mine tailings valorization.
A critical discussion of whether lunar basalt or regolith should be used as a resource for mineral processing schemes on the lunar surface, with pros and cons for each argument is presented. A literature review has shown that the majority of authors feel that mining the lunar basalt, crushing it, and then processing to remove the desired minerals, would be the route to take. The argument that this method would not be a sound mineral processing practice is presented. Mining and crushing are difficult propositions even on Earth; to attempt such processes in the hostile lunar environment would be a phenomenal task. It would be better to start with a simpler scheme, such as processing the regolith, which can be adapted to the multitude of unknowns facing the first lunar production plant. If, however, the lunar mining trend is followed, it must be kept in mind that mining and processing technology which is radically different from what is currently available and used on Earth will have to be developed. Podnieks and Roepke (1987) and Lindroth and Podnieks (1987) have summarized the new technology that may be applicable, but this technology is very similar to the current, 99 percent inefficient technology used on Earth. One such possible technique is sodium vapor fragmentation of basalt. Initial testwork was conducted at Michigan Technological University on terrestrial basalt with extremely promising results, though much time and effort will be needed to fully develop this process.
In this paper, several techniques considered for mining and processing the regolith on the lunar surface are presented. These techniques have been proposed and evaluated based primarily on the following criteria: (1) mining operations should be relatively simple; (2) procedures of mineral processing should be few and relatively easy; (3) transferring tonnages of regolith on the Moon should be minimized; (4) operations outside the lunar base should be readily automated; (5) all equipment should be maintainable; and (6) economic benefit should be sufficient for commercial exploitation. The economic benefits are not addressed in this paper; however, the energy benefits have been estimated to be between 250 and 350 times the mining energy. A mobile mining scheme is proposed that meets most of the mining objectives. This concept uses a bucket-wheel excavator for excavating the regolith, several mechanical electrostatic separators for beneficiation of the regolith, a fast-moving fluidized bed reactor to heat the particles, and a palladium diffuser to separate H2 from the other solar wind gases. At the final stage of the miner, the regolith 'tailings' are deposited directly into the ditch behind the miner and cylinders of the valuable solar wind gases are transported to a central gas processing facility. During the production of He-3, large quantities of valuable H2, H2O, CO, CO2, and N2 are produced for utilization at the lunar base. For larger production of He-3 the utilization of multiple-miners is recommended rather than increasing their size. Multiple miners permit operations at more sites and provide redundancy in case of equipment failure.
Dewatering of slurries has been successfully accomplished by the proper use of polymers in flocculating the fine particulate matter suspended in mineral processing streams. The U.S. Bureau of Mines (USBM) entered into a cooperative research effort with the U.S. Army Corps of Engineers (Corps) for the purpose of testing and demonstrating the applicability of mining flocculation technology to dredging activities associated with the removal of sediments from navigable waterways. The Corps has the responsibility for maintaining the navigable waterways in the United States. Current technology relies primarily on dredging operations which excavate the material from the bottom of waterways. The Corps is testing new dredging technology which may reduce resuspension of sediments by the dredging operation. Pilot plant dredging equipment was tested by the Corps which generated larger quantities of water when compared to conventional equipment, such as the clam shell. The transportation of this 'excess' water adds to the cost of sediment removal. The process developed by the USBM consists of feed material from the barge being pumped through a 4-in line by a centrifugal pump and exiting through a 4-in PVC delivery system. A 1,000-gal fiberglass tank was used to mix the polymer concentrate. The polymer was pumped through a 1-in line using a variable speed progressive cavity pump and introduced to the 4-in feed line prior to passing through a 6-in by 2-ft static mixer. The polymer/feed slurry travels to the clarifying tank where the flocculated material settled to the bottom and allowed 'clean' water to exit the overflow. A pilot scale flocculation unit was operated on-site at the Corps' 'Confined Disposal Facility' in Buffalo, NY.
A recent study by Penn State researchers revealed that Pennsylvania AMD streams originate from abandoned mines, with coal refuse piles of the lower Kittanning coal seam containing the most valuable heavy rare earth elements. Penn State has developed a three-stage process to recover these critical minerals, tested it for proof of concept, and secured a patent. Funded by the US DOE, a modular pilot-scale research and development unit has been designed and built to process 1,000 gallons per day of AMD from a site managed by the Pennsylvania Department of Environmental Protection (PA DEP). The system will selectively recover iron, aluminum, rare earth elements, and cobalt-nickel-manganese concentrates from AMD, followed by a proprietary downstream purification process. These operations aim to produce concentrates of critical minerals while treating acid mine drainage to meet environmental standards and evaluate different feedstocks. This presentation will describe the design, operation, and innovations of the proposed process and pilot facility, emphasizing its role in promoting sustainable recovery of critical minerals from legacy waste streams.
Ammonium coordinated exchanger (ACE) sorbents recovery/remove anionic contaminant/critical metals from water. Heavy reliance of the U.S. on foreign critical mineral (CM) supplies presents national security and economics risks. This prompted government action. Domestically recovering CM from unconventional water sources, largely through adsorption processes, could alleviate this problem. Acid mine drainage and mineral leachates are viable sources
A manufacturing plant and process for production of oxygen on the moon uses lunar minerals as feed and a minimum of earth-imported, process materials. Lunar feed stocks are hydrogen-reducible minerals, ilmenite and lunar agglutinates occurring in numerous, explored locations mixed with other minerals in the pulverized surface layer of lunar soil known as regolith. Ilmenite (FeTiO.sub.3) and agglutinates contain ferrous (Fe.sup.+2) iron reducible by hydrogen to yield H.sub.2 O and metallic Fe at about 700.degree.-1,200.degree. C. The H.sub.2 O is electrolyzed in gas phase to yield H.sub.2 for recycle and O.sub.2 for storage and use. Hydrogen losses to lunar vacuum are minimized, with no net hydrogen (or any other earth-derived reagent) consumption except for small leaks. Feed minerals are surface-mined by front shovels and transported in trucks to the processing area. The machines are manned or robotic. Ilmenite and agglutinates occur mixed with silicate minerals which are not hydrogen-reducible at 700.degree.-1,200.degree. C. and consequently are separated and concentrated before feeding to the oxygen generation process. Solids rejected from the separation step and reduced solids from the oxygen process are returned to the mine area. The plant is powered by nuclear or solar power generators. Vapor-phase water electrolysis, a staged, countercurrent, fluidized bed reduction reactor and a radio-frequency-driven ceramic gas heater are used to improve thermal efficiency.
In September 2020, the U.S. government issued an executive order to address the threat to the domestic supply chain from its reliance on critical minerals (CMs) from foreign competitors and to support the domestic mining and processing industry. A national strategy on CMs with impact on the U.S. Department of Energy’s (DOE’s) vision for 2021–2031 was developed. This vision embraces science and technology to re-establish U.S. competitiveness in the CM and material supply chains by (a) scientific innovation and technologies to ensure resilient and secure CMs and maintain a domestic material supply chain, (b) building a long-term minerals and materials innovation ecosystem to foster new capabilities to mitigate CM supply chain challenges, (c) increasing private sector adoption for sustaining the domestic CM supply chain, and (d) coordinating with international partners and federal agencies to diversify global supply chains and ensure the adoption of best practices for sustainable mining and processing (DOE 2021).
The Space Exploration Initiative (SEI) includes space resource utilization as one of the four architectures to achieve U.S. goals in space. Space resource utilization will make use of lunar resources to support long term activities on the lunar surface. Lunar ilmenite and regolith are two of the materials that can be mined and processed for lunar oxygen production. During this investigation, several sources were reviewed to assess terrestrial exploration methods used for locating ilmenite resources. These sources included published reports on terrestrial ilmenite exploration methods, analytical methods, case histories, chemical and physical properties, and associations with other minerals. Using a terrestrial analog and considering the differences between terrestrial and lunar environmental conditions, rocks, and minerals, exploration methods and analytical instruments can be recommended for a lunar orbiter and lander for assessing lunar resources. Twelve terrestrial case histories were reviewed to gain insight into ilmenite exploration on the Moon. All exploration case histories follow the same pattern. They begin with a model, use remote geophysical techniques, define regional sampling sites from the model and geophysics, narrow down the area of exploration based on the preceding work, collect more samples and cores, and perform laboratory analyses of samples. An important part of this process is the collection of samples to determine the correctness of the model. Surface and core samples are collected in areas expected to contain both high and low concentration of the commodity to test the model. After samples are analyzed and the area of mineralization is defined, reserves are calculated to determine the cost/benefit ratio, the necessary capacity of the processing plant, and the life of the mine. The exploration methods used for locating terrestrial ilmenite resources are reviewed with respect to the petrology, chemistry, and mineral associations of the terrestrial and lunar environments.
In September 2020, the U.S. government issued an executive order to address the threat to the domestic supply chain from its reliance on critical minerals (CMs) from foreign competitors and to support the domestic mining and processing industry. The Advanced Materials and Manufacturing Technology (AMMT) program is addressing this executive order by evaluating advanced manufacturing (AM) and its impact on the demands of CMs for energy production in general and how the deployment of AM in nuclear energy will support the projected goals of the Paris Accord and further a net-zero carbon economy (NZE) by 2050. Three strategic reports were previously prepared by the AMMT program to date and identified two areas for more detailed exploration: (1) the replacement of high-risk CMs such as cobalt and niobium by more abundant minerals and (2) the minimization and utilization of CM waste streams. The design of nuclear materials without critical elements as alloying elements, is a part of the nuclear materials strategy to overcome the critical minerals scarcity. In this report, two approaches are evaluated namely (1) replacement of critical elements as alloying elements in nuclear materials, and (2) the design of a new alloys that does not contain critical minerals as an alloying element.
The efficient recovery of critical minerals, such as nickel (Ni) and manganese (Mn) from the subsurface is of vital importance, given their role in modern technologies ranging from batteries to advanced alloys. This study explores an approach that employs chelation to enhance critical mineral recovery from ultramafic rocks using chelating ligands under ambient pressures and systematically evaluates the extraction process for the first time. Experimental results demonstrate the superior performance of EDTA and PrDTA in achieving high extraction efficiencies for both Ni and Mn. To further highlight the ability for optimization, the fluid exchange and variation of fluid-to-rock ratio experiments were conducted, revealing tunable controls for engineering recovery. We show that under optimized conditions, a Ni extraction efficiency of ?82% and a Mn extraction efficiency of ~60% is achieved at ambient pressures, which is equivalent to over 23 times the current global Ni production, and 2 million metric tonnes (MMT) greater than the current global Mn production. From both in-situ and ex-situ mining perspectives, the results highlight the potential of chelation to advance sustainable mineral processing. Overall, this work highlights the environmental benefits of innovative ligand-assisted recovery methods, addressing the critical need for the efficient utilization of olivine resources.
The beneficiation of lunar plagioclase and ilmenite ores to feedstock grade permits a rapid growth of the space manufacturing economy by maximizing the production rate of metals and oxygen. A beneficiation scheme based on electrostatic and magnetic separation is preferred over conventional schemes, but such a scheme cannot be completely modeled because beneficiation processes are empirical and because some properties of lunar minerals have not been measured. To meet anticipated shipping and processing needs, the peak lunar mining rate will exceed 1000 tons/hr by the fifth year of operation. Such capabilities will be best obtained by automated mining vehicles and conveyor systems rather than trucks. It may be possible to extract about 40 kg of volatiles (60 percent H2O) by thermally processing the less than 20 micron ilmenite concentrate extracted from 130 tons of ilmenite ore. A thermodynamic analysis of an extraction process is presented.
Extraction, processing, and utilization of extraterrestrial mineral resources
The analysis of returned lunar samples and a comparison of the physical and chemical processes operating on the Moon and on the Earth provide a basis for predicting both the possible types of material resources (especially minerals and rocks) and the physical characteristics of ore deposits potentially available on the Moon. The lack of free water on the Moon eliminates the classes of ore deposits that are most exploitable on Earth; namely, (1) hydrothermal, (2) secondary mobilization and enrichment, (3) precipitation from a body of water, and (4) placer. The types of lunar materials available for exploitation are whole rocks and their contained minerals, regolith, fumarolic and vapor deposits, and nonlunar materials, including solar wind implantations. Early exploitation of lunar material resources will be primarily the use of regolith materials for bulk shielding; the extraction from regolith fines of igneous minerals such as plagioclase feldspars and ilmenite for the production of oxygen, structural metals, and water; and possibly the separation from regolith fines of solar-wind-implanted volatiles. The only element, compound, or mineral, that by itself has been identified as having the economic potential for mining, processing, and return to Earth is helium-3.
This review article presents a concise review of estimated resources, processing methods and challenges involved in domestic rare earth mining projects in the United States (US). It also highlights the current status of major mining projects, anticipated rare earth production in the near future, and commercial projects utilizing non-traditional feedstocks for rare earth production and recycling. Based on the current industry outlook, opportunities for R&D have also been highlighted. Perspective on domestic rare earth production capability is essential because global rare earth production is currently dominated by China. Given potential export controls by China, this imbalance has created supply chain risk. The US and other countries have limited rare earth production capacity and relatively little expertise in rare earth processing. However, in the last decade, efforts have been made by several nations, including the US, to reduce their reliance on China for rare earth and other critical minerals. The US is currently investing in projects to develop domestic rare earth separation and refining capacity. These projects are discussed here. When backed by R&D and government support, these projects have potential to make significant progress towards establishment of domestic rare earth separation capabilities.
A systematic survey of 57 different paragenetic modes distributed among 5659 mineral species reveals patterns in the diversity and distribution of minerals related to their evolving formational environments. The earliest minerals in stellar, nebular, asteroid, and primitive Earth contexts were dominated by relatively abundant chemical elements, notably H, C, O, Mg, Al, Si, S, Ca, Ti, Cr, and Fe. Significant mineral diversification subsequently occurred via two main processes, first through gradual selection and concentration of rarer elements by fluid-rock interactions (for example, in hydrothermal metal deposits, complex granite pegmatites, and agpaitic rocks), and then through near-surface biologically mediated oxidation and weathering. We find that 3349 mineral species (59.2%) are known from only one paragenetic context, whereas another 1372 species (24.2%) are associated with two paragenetic modes. Among the most genetically varied minerals are pyrite, albite, hornblende, corundum, magnetite, calcite, hematite, rutile, and baryte, each with 15 or more known modes of formation. Among the most common paragenetic modes of minerals are near-surface weathering/oxidation (1998 species), subsurface hydrothermal deposition (859 species), and condensation at volcanic fumaroles (459 species). In addition, many species are associated with compositionally extreme environments of highly differentiated igneous lithologies, including agpaitic rocks (726 species), complex granite pegmatites (564 species), and carbonatites and related carbonate-bearing magmas (291 species). Biological processes lead to at least 2707 mineral species, primarily as a consequence of oxidative weathering but also through coal-related and other taphonomic minerals (597 species), as well as anthropogenic minerals, for example as byproducts of mining (603 minerals). However, contrary to previous estimates, we find that only ~34% of mineral species form exclusively as a consequence of biological processes. By far the most significant factor in enhancing Earth’s mineral diversity has been its dynamic hydrological cycle. At least 4583 minerals—81% of all species—arise through water-rock interactions. A timeline for mineral-forming events suggests that much of Earth’s mineral diversity was established within the first 250 million years. If life is rare in the universe, then this view of a mineralogically diverse early Earth provides many more plausible reactive pathways over a longer timespan than previous models. If, however, life is a cosmic imperative that emerges on any mineral- and water-rich world, then these findings support the hypothesis that life on Earth developed rapidly in the early stages of planetary evolution