SEARCH · Search NASA
Results for “Modulus”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Elastic Modulus Measurements on Large Diameter Nanowires Using a Nano-assembled Platform
Explore the source record for details and available documents.
Effects of enzymes on elastic modulus of low-density lipoproteins were investigated using atomic force microscopy
Highlights: • The elastic modulus of the enzymatically digested LDL was evaluated using AFM. • The LDL elastic modulus was decreased not by proteases but by phospholipase A{sub 2}. • The LDL size was unaffected by proteases or PLA{sub 2}. Oxidation of low-density lipoproteins (LDLs) induces development of cardiovascular disease. Recently, reports of studies using atomic force microscopy (AFM) have described that the elastic modulus of metal-induced oxidized LDLs is lower than the modulus before oxidation. However, the mechanisms of change of the elastic modulus have not been well investigated. We postulated that disorder of the LDL structure might decrease the elastic modulus. This study measured the elastic modulus of LDLs before and after enzyme treatment with V8 protease, α-chymotrypsin, and phospholipase A{sub 2}. After LDLs were obtained from serum by ultracentrifugation, LDLs or enzyme-treated LDLs were physically absorbed. They were crowded on a mica surface. Although V8 protease and α-chymotrypsin did not induce the elastic modulus change, treatment with PLA{sub 2} decreased the elastic modulus. The LDL particle size did not change during the enzyme treatment. Results suggest that disordering of the lipid structure of the LDL might contribute to the elastic modulus change. Results show that AFM might be a useful tool to evaluate disorders of complex nanoscale particle structures from lipids and proteins such as lipoproteins.
Effect of interfacial transition zone on the Young's modulus of carbon nanofiber reinforced cement concrete
Identifying the properties of the region where the cement paste meets the aggregate surface (interfacial transition zone, ITZ) is critical to understanding the strength and fracture behavior of carbon nanofiber (CNF) reinforced cement concrete. In this study, the finite element method is employed to investigate the effect of the ITZ on the Young's modulus of cement concrete made with CNF. The numerical models for cement concrete with and without CNF are constructed based on the digital image processing technique. To consider the interface effect, the concept of ''effective aggregate'' is put forward, namely, the Young's modulus and Poisson's ratio for each aggregate particle are replaced by an effective Young's modulus and effective Poisson's ratio, in which the effect of thickness and the Young's modulus of ITZ is taken into account in an averaged manner. Then, the quantitative nanomechanical mapping (based on atomic force microscopy) technique is adopted to measure the Young's modulus and thickness of ITZ with and without CNFs, which are further used as the input parameters in the numerical model. The numerical simulation results are verified by experimental testing, which indicates that the ITZ effect should be considered when implementing the numerical simulation. In addition, this analysis shows that compared with the plain cement concrete, CNFs can greatly enhance the mechanical properties of ITZ, which will in turn improve the Young's modulus of cement concrete significantly. Finally, the effect of thickness and Young's modulus of ITZ on the Young's modulus of CNF reinforced cement concrete is also discussed.
Full-Field Strain Measurement Integrated with Two Dimension Regression Analysis to Evaluate the Bi-Modulus Elastic Properties of Isotropic and Transversely Isotropic Materials
Background: Measuring the physical properties of shale is critical for optimizing engineering activities such as geothermal energy generation and hydraulic fracturing. Shale is a transversely isotropic material. Furthermore, this material can also include micro and macro cracks at different locations and orientations that cause it to behave differently under tensile or compressive loading. Objective: In this work, a combined experimental–numerical approach is proposed to evaluate the bi-modulus elastic properties of isotropic and transversely isotropic materials. Methods: Full-field strain measurements for a circular disk under diametral compression are integrated with a regression analysis technique to evaluate the elastic properties of bi-modulus materials subjected to tensile and compressive loads using two loading configurations on the same specimen. Digital Image Correlation (DIC) is used to measure the full-field strains. Subsequently, in the case of an isotropic material, a linear least-squares approach is utilized to process the experimentally determined strains in conjunction with analytical expressions of the stress fields (in terms of far-field loading) to determine the elastic modulus E, the shear modulus G, and the Poisson’s ratio $v$. In the case of a transversely isotopic material, such as shale, a finite element model is implemented to determine the stress fields (again in terms of far-field loading), which is followed by repeating the previous regression analysis in an iterative process to estimate the elastic parameters. Results: The results show that the proposed technique successfully provides a complete set of elastic properties as a function of both the loading condition and the principal material directions. The technique is validated by measurements on a known isotropic material and then applied to determine the properties of shale. Conclusion: In this work, the proposed approach is successfully used to calculate the bi-modulus elastic response of poly(methyl meth- acrylate) (PMMA) and shale. As expected, PMMA exhibits an isotropic response with no bi-modulus effect, however, shale exhibits both transverse isotropy and a bi-modulus effect. Therefore, this approach holds promise for investigating the elastic properties of materials like rocks and fiber-reinforced composite laminates as functions of the principal material directions and the loading conditions.
Elastic modulus of phases in Ti–Mo alloys
In this work, a series of binary Ti–Mo alloys with the Mo contents ranging from 3.2 to 12 at.% were prepared using non-consumable arc melting. The microstructures were investigated by X-ray diffraction and transmission electron microscope, and the elastic modulus was evaluated by nanoindentation testing technique. The evolution of the volume fractions of ω phase was investigated using X-ray photoelectron spectroscopy. The results indicated that the phase constitution and elastic modulus of the Ti–Mo alloys are sensitive to the Mo content. Ti–3.2Mo and Ti–8Mo alloys containing only α and β phases, respectively, have a low elastic modulus. In contrast, Ti–4.5Mo, Ti–6Mo, Ti–7Mo alloys, with different contents of ω phase, have a high elastic modulus. A simple micromechanical model was used to calculate the elastic modulus of ω phase (E{sub ω}), which was determined to be 174.354 GPa. - Highlights: • Ti–Mo alloys with the Mo contents ranging from 3.2 to 12 at.% were investigated. • XPS was used to investigate the volume fractions of ω phase. • The elastic modulus of Ti–Mo alloys is sensitive to the Mo content. • The elastic modulus of ω phase was determined to be 174.354 GPa.
Effect of interfacial reaction on Young's modulus in CNT/Al nanocomposite: A quantitative analysis
Highlights: • Effect of interfacial reaction on Young’s modulus of CNT/Al composite was quantitatively revealed. • Both qualitative and quantitative characterizations of CNT/Al interfacial reaction were conducted. • Volume expansion induced by CNTs-Al{sub 4}C{sub 3} transformation was the key to modulus increase with greater reaction degree. • The significant role of raw CNTs quality in “Young’s modulus-interfacial reaction” relationship was uncovered. - Abstract: 1.5 wt% CNT/Al nanocomposite with limited, moderate and severe interfacial reaction were prepared by flake PM and annealing to study the effect of interfacial reaction on Young's modulus. Both qualitative and quantitative characterizations of CNT/Al interfacial reaction were conducted through TEM observation and electrochemical dissolution. The results showed that the strong reinforcing effect of reaction-formed Al{sub 4}C{sub 3} and the significant volume expansion effect during CNTs-Al{sub 4}C{sub 3} transformation resulted in Young's modulus increase with greater CNT/Al interfacial reaction degree. The significant role of raw CNTs quality in “Young's modulus-interfacial reaction degree” relationship was discussed. Both raw CNT quality and CNT/Al interfacial reaction need to be well controlled and optimized for fabricating CNT/Al nanocomposite with higher Young's modulus.
A computer simulation approach to quantify the true area and true area compressibility modulus of biological membranes
We present a new computational approach to quantify the area per lipid and the area compressibility modulus of biological membranes. Our method relies on the analysis of the membrane fluctuations using our recently introduced coupled undulatory (CU) mode [Tarazona et al., J. Chem. Phys. 139, 094902 (2013)], which provides excellent estimates of the bending modulus of model membranes. Unlike the projected area, widely used in computer simulations of membranes, the CU area is thermodynamically consistent. This new area definition makes it possible to accurately estimate the area of the undulating bilayer, and the area per lipid, by excluding any contributions related to the phospholipid protrusions. We find that the area per phospholipid and the area compressibility modulus features a negligible dependence with system size, making possible their computation using truly small bilayers, involving a few hundred lipids. The area compressibility modulus obtained from the analysis of the CU area fluctuations is fully consistent with the Hooke’s law route. Unlike existing methods, our approach relies on a single simulation, and no a priori knowledge of the bending modulus is required. We illustrate our method by analyzing 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine bilayers using the coarse grained MARTINI force-field. The area per lipid and area compressibility modulus obtained with our method and the MARTINI forcefield are consistent with previous studies of these bilayers.
Measurement of Young's modulus of GaAs nanowires growing obliquely on a substrate
A convenient and fast method for measuring Young's modulus of semiconductor nanowires obliquely standing on the growth substrate is presented. In this method, the nanowire is elastically bent under the force exerted by the probe of an atomic-force microscope, and the load-unload dependences for the bending of the probe cantilever are recorded. Next, these curves are used to find the bending stiffness of the tilted nanowires, after which, taking into account the nanowire dimensions, Young's modulus is obtained. The implementation of this method is demonstrated for tilted GaAs nanowires growing on a GaAs (111) substrate. Young's modulus is determined by applying finite-element analysis to the problem of the stationary elastic bending of a nanowire taking into account the actual nanowire shape and faceting. It proves that a fairly accurate estimate of Young's modulus can be obtained even if the nanowire shape is approximated by a circular cylinder with a single cross-sectional area. The values of Young's modulus obtained for GaAs nanowires of cubic lattice symmetry are 2 to 3 times smaller than its value for bulk GaAs. This difference is attributed to the presence of stacking faults in the central part of the nanowires.
Non-free gas of dipoles of non-singular screw dislocations and the shear modulus near the melting
The behavior of the shear modulus caused by proliferation of dipoles of non-singular screw dislocations with finite-sized core is considered. The representation of two-dimensional Coulomb gas with smoothed-out coupling is used, and the stress–stress correlation function is calculated. A convolution integral expressed in terms of the modified Bessel function K{sub 0} is derived in order to obtain the shear modulus in approximation of interacting dipoles. Implications are demonstrated for the shear modulus near the melting transition which are due to the singularityless character of the dislocations. - Highlights: • Thermodynamics of dipoles of non-singular screw dislocations is studied below the melting. • The renormalization of the shear modulus is obtained for interacting dipoles. • Dependence of the shear modulus on the system scales is presented near the melting.
E-modulus evolution and its relation to solids formation of pastes from commercial cements
Models for early age E-modulus evolution of cement pastes are available in the literature, but their validation is limited. This paper provides correlated measurements of early age evolution of E-modulus and hydration of pastes from five commercial cements differing in limestone content. A recently developed methodology allowed continuous monitoring of E-modulus from the time of casting. The methodology is a variant of classic resonant frequency methods, which are based on determination of the first resonant frequency of a composite beam containing the material. The hydration kinetics - and thus the rate of formation of solids - was determined using chemical shrinkage measurements. For the cements studied similar relationships between E-modulus and chemical shrinkage were observed for comparable water-to-binder ratio. For commercial cements it is suggested to model the E-modulus evolution based on the amount of binder reacted, instead of the degree of hydration.
Characterization of multilayer nitride coatings by electron microscopy and modulus mapping
This paper discusses multi-scale characterization of physical vapour deposited multilayer nitride coatings using a combination of electron microscopy and modulus mapping. Multilayer coatings with a triple layer structure based on TiAlN and nanocomposite nitrides with a nano-multilayered architecture were deposited by Cathodic arc deposition and detailed microstructural studies were carried out employing Energy Dispersive Spectroscopy, Electron Backscattered Diffraction, Focused Ion Beam and Cross sectional Transmission Electron Microscopy in order to identify the different phases and to study microstructural features of the various layers formed as a result of the deposition process. Modulus mapping was also performed to study the effect of varying composition on the moduli of the nano-multilayers within the triple layer coating by using a Scanning Probe Microscopy based technique. To the best of our knowledge, this is the first attempt on modulus mapping of cathodic arc deposited nitride multilayer coatings. This work demonstrates the application of Scanning Probe Microscopy based modulus mapping and electron microscopy for the study of coating properties and their relation to composition and microstructure. - Highlights: • Microstructure of a triple layer nitride coating studied at multiple length scales. • Phases identified by EDS, EBSD and SAED (TEM). • Nanolayered, nanocomposite structure of the coating studied using FIB and TEM. • Modulus mapping identified moduli variation even in a nani-multilayer architecture.
The correlation between shear elastic modulus and glass transition temperature of bulk metallic glasses
Based on Varshni equation, the shear elastic modulus at the glass transition temperature [G(T{sub g})] and the shear elastic modulus at 0 K [G(0)] were calculated from the elastic modulus measured at room temperature for various bulk metallic glasses (BMGs). The G(T{sub g})/G(0) ratios for various BMGs are almost the same and have a value around 0.85. This unique correlation implies that the glass transition occurs when the shear modulus of a BMG decreases to about 85% of G(0). This correlation between shear modulus and glass transition is of significance in understanding the glass transition of BMGs.
Linear Correlation Between Binding Energy and Young’s Modulus in Graphene Nanoribbons
Graphene nanoribbons (GNRs) have been suggested as a promising material for its use as nanoelectromechanical reasonators for highly sensitive force, mass, and charge detection. Therefore the accurate determination of the size-dependent elastic properties of GNRs is desirable for the design of graphene-based nanoelectromechanical devices. In this study we determine the size-dependent Young’s modulus and carbon-carbon binding energy in a homologous series of GNRs, C4n2+6n+2H6n+4 (n=2–12), with the use of all electron first principles computations. An unexpected linearity between the binding energy and Young’s modulus is observed, making possible the prediction of the size-dependent Young’s modulus of GNRs through a single point energy calculation of the GNR ground state. A quantitative-structure-property relationship is derived, which correlates Young’s modulus to the total energy and the number of carbon atoms within the ribbon. In the limit of extended graphene sheets we determine the value of Young’s modulus to be 1.09 TPa, in excellent agreement with experimental estimates derived for graphite and suspended grapheme sheets.
Transverse Young's modulus of carbon/glass hybrid fiber composites
Hybrid fiber composites offer designers a means of tailoring the stress–strain behavior of lightweight materials used in high-performance structures. While the longitudinal stress–strain behavior of unidirectional hybrid fiber composites has been thoroughly evaluated experimentally and analytically, relatively little information is available on the transverse behavior. The objective of the current investigation is to present data on the transverse modulus of elasticity of unidirectional composites with five different ratios of carbon and glass fiber and to compare the data with predictive and fitted models. The transverse modulus increases monotonically with the proportion of glass fiber in the composite. Finite element analysis was used to evaluate different ways to model voids in the matrix and allowed the unknown transverse properties of the carbon fibers to be backed out using experimental data from the all-carbon composite. The finite element results show that the transverse modulus can be accurately modeled if voids are modeled explicitly in the matrix region and if modulus is calculated based on stress applied along the minimum interfiber distance path between adjacent fibers arranged in a rectangular array. The transverse modulus was under-predicted by the iso-stress model and was well predicted by a modified iso-stress model and a modified Halpin–Tsai model.
Improved Calculation of the Young’s Modulus of Rectangular Prisms from Their Resonant Frequency Overtones by Identifying Appropriate Shear Constants
Young’s modulus is an important parameter for characterizing the strength of, and wave propagation through, a given material. This study improves the estimation of Young’s modulus using the impulse excitation technique based on an experimental analysis of 19 borosilicate glass bars. Analysis of the frequency equations relating Young’s modulus to the out-of-plane and in-plane flexural resonant frequencies of rectangular prisms has been conducted for both the fundamental frequency and its overtones at higher orders of vibration. Furthermore, the Young’s moduli of three novaculite rocks with various porosities were then measured up to the seventh order of vibration to validate the optimum shear constant equation for estimating Young’s modulus. Young’s modulus was found to be nearly frequency independent for these rock samples.
Indentation-derived elastic modulus of multilayer thin films: Effect of unloading induced plasticity
Nanoindentation is useful for evaluating the mechanical properties, such as elastic modulus, of multilayer thin film materials. A fundamental assumption in the derivation of the elastic modulus from nanoindentation is that the unloading process is purely elastic. In this work, the validity of elastic assumption as it applies to multilayer thin films is studied using the finite element method. The elastic modulus and hardness from the model system are compared to experimental results to show validity of the model. Plastic strain is shown to increase in the multilayer system during the unloading process. Additionally, the indentation-derived modulus of a monolayer material shows no dependence on unloading plasticity while the modulus of the multilayer system is dependent on unloading-induced plasticity. Lastly, the cyclic behavior of the multilayer thin film is studied in relation to the influence of unloading-induced plasticity. Furthermore, it is found that several cycles are required to minimize unloading-induced plasticity.
Failure Stress and Apparent Elastic Modulus of Diesel Particulate Filter Ceramics
Three established mechanical test specimen geometries and test methods used to evaluate mechanical properties of brittle materials are adapted to the diesel particulate filter (DPF) architecture to evaluate failure initiation stress and apparent elastic modulus of the ceramics comprising DPFs. The three custom-designed test coupons are harvested out of DPFs to promote a particular combination of orientation of crack initiation and crack plane. The testing of the DPF biaxial flexure disk produces a radial tensile stress and a crack plane parallel with the DPF's longitudinal axis. The testing of the DPF sectored flexural specimen produces axial tension at the DPF's OD and a crack plane perpendicular to the DPF's longitudinal axis. The testing of the DPF o-ring specimen produces hoop tension at the DPF's original outer diameter (OD) and at the inner diameter of the test coupon, and a crack plane parallel to the DPF's longitudinal axis. The testing of these mechanical test coupons also enables the determination of an apparent elastic modulus of the DPF ceramic material. Results consistently show that the apparent elastic modulus of the DPF ceramics is much less (e.g., up to an order of magnitude less) than apparent elastic modulus estimated using sonic- or resonance-based test methods. These specimen geometries, produced stress states, and modes of consequential crack initiation are discussed in context to the DPF's symmetry along with the assessments of each specimen's ease of fabrication, testing, failure stress determination, ultimate viability, and prospects for test standardization. Lastly, an explanation is offered for why the apparent elastic modulus measured with these three mechanical test coupons is relatively low and why their low values are more accurate for predicting thermomechanical stresses in DPFs.