SEARCH · Search NASA

Results for “Molten Salt Reactor Experiment (MSRE)”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

DOE OSTI2019

Status Report on the MSRE Transform Model for Thermal-Hydraulic Benchmarking

Over the last several years, there has been renewed interest in the development of molten salt reactor concepts for the next generation of nuclear power plants. The modeling tools used to design these reactors must be validated in order to accurately predict the thermal hydraulic behavior expected during operation. The majority of the practical experience with molten salt reactors comes from the Molten Salt Reactor Experiment (MSRE) that operated at Oak Ridge National Laboratory (ORNL) from 1964 until 1969. The work discussed in this paper uses the design information and experimental data from that period to create and validate a detailed model of the MSRE. Once completed, this model’s performance will be compared to other system analysis codes for thermal hydraulic benchmarking, and their ability to predict the thermal hydraulic performance of molten salt reactor systems will also be compared.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2019

MSRE TRANSFORM Model for Thermal-Hydraulic Benchmarking (Status Report)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2024

Investigation of the Impact of TSL Data Libraries and Geometry Variations on the MSRE Benchmark

The increasing demand for green, low-carbon energy solutions has amplified the focus on advanced nuclear reactor technologies. Among these, Molten Salt Reactors (MSRs) have been spotlighted because of their special features. Historically, Oak Ridge National Laboratory (ORNL) started the Molten Salt Reactor Experiment (MSRE) in 1956. Later, ORNL and the University of California, Berkeley (UCB) jointly developed the MSRE benchmark. This was then reviewed by the International Reactor Physics Experiment Evaluation Project (IRPhEP) committee and added to their 2019 handbook. In the current study, the benchmark model was recreated via the Serpent code. The calculated effective multiplication factor was 1.02087 ± 0.00019, which gives a deviation of about 2000 pcm compared to the benchmark/experimental result. At North Carolina State University (NCSU), recent evaluations were conducted on thermal scattering cross sections for molten salt FLiBe and 20% porous nuclear graphite, anticipated for incorporation in the ENDF/B-VIII.1 library. The influences of these thermal scattering law (TSL) data and geometry changes on the multiplication factor were examined using the ENDF/B-VII.1 and ENDF/B-VIII.0 libraries. Introducing the TSL data for FLiBe and 20% porous graphite resulted in an effective multiplication factor of +270 pcm compared to the reference value obtained with ENDF/B-VII.1 in this study. The adjustment of the reactor vessel dimensions resulted in decrease of -448 pcm in the calculated effective multiplication factor.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2020

Modeling Molten Salt Reactor Fission Product Removal with SCALE

Liquid-fuel Molten Salt Reactors (MSRs) allow for continuous online fuel treatment and processing using a variety of subsystems. Among these subsystems, the off-gas system (OGS) continuously removes fission products from the primary fuel salt through a helium sparging process. Accurately modeling fission product behavior is paramount for the development of MSRs; while there are a variety of depletion modeling and simulation tools that allow for removal of material from a defined system, most of them work in a semicontinuous, batch-wise manner. The new tools implemented into TRITON, in the SCALE suite for reactor analysis and design, aim to address this issue by implementing truly continuous material feeds and removals. In addition, material accountancy is enhanced in these tools, which enable tracking of removed material in user-specified mixtures. These continuous depletion tools provide a way to model material transport throughout systems more efficiently and accurately. This report validates the new SCALE MSR modeling capabilities using data from the Molten Salt Reactor Experiment (MSRE). After a framework was established for deriving realistic removal rates based on design specifications, these rates were used by TRITON to continuously remove specific elements while performing burnup calculations. Results were compared to those obtained in MSRE, with a focus on the 135 Xe poison fraction. After these capabilities were validated, the learned concepts and best practices were applied to model the Molten Salt Breeder Reactor (MSBR) and the Molten Salt Demonstration Reactor (MSDR) to study the effects of continuous fission product removal in fuel salt reactivity, as well as the lifetime effects.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2026

Influence of Surfactants on Noble Metal Liquid-Gas Interface Mass Transfer in Molten Salt Reactors

Noble metals, a group of insoluble fission products (FPs), can accumulate in molten salt reactors (MSRs) and influence system performance and safety through deposition. Upon generation in fission, noble metals are transported by circulating salt and may either deposit on structural surfaces or enter the circulating gas bubble interfaces. While sparging was primarily designed for xenon and krypton removal, the mass transfer of noble metals into bubble interfaces highlights a potential pathway for their transport and partial extraction. The properties of the liquid-gas interface therefore play an important role in noble metal deposition and removal behaviors. Observations from earlier studies suggest that noble metals accumulated at the bubble interface can act as surfactants, making the bubble interface partially immobile. This behavior reduces the mass transfer capacity of circulating bubbles and affects both the overall distribution of noble metals in the loop and their removal efficiency. To investigate the influence of surfactants on noble metal transport, deposition, and extraction behaviors in MSRs, a previously developed and validated species transport model incorporating noble metal interphase mass transfer was used to simulate these behaviors. Two designed cases were studied to predict the distribution of 132Te along the Molten Salt Reactor Experiment (MSRE) loop under different bubble interface conditions. The results show that the mass transfer coefficients at the liquid-gas interface, determined by bubble interface characteristics, significantly influence noble metal distribution within the reactor loop. These findings emphasize the importance of continuously introducing fresh circulating bubbles into the molten salt to improve the removal efficiency of insoluble FPs from the MSR primary loop.

MSR↗

DOE OSTI2021

Scalable modular dynamic molten salt reactor system model with decay heat

Nodal dynamic models allow rapid reduced-order simulations of complex systems. This paper presents a publicly available system dynamic model of a molten salt reactor system with a topology of the Molten Salt Reactor Experiment (MSRE), in MATLAB/Simulink, building upon a model previously published and validated with MSRE data. It adds scaling of nominal power, dynamic representation of decay heat generation, a generic decay heat removal system, improved documentation, modularity, and test cases. One hour of system transient runs in less than 10 min on a laptop. This model is intended for first order engineering calculations, developing insights into system transient behavior, equipment sizing, parameter sensitivity studies. The model contains an easy to use toolkit which can be customized and expanded to describe any molten salt reactor system. Finally, scenarios involving off-normal transients are presented. Relation between shutdown reactivity insertions, decay heat removal, core recriticality, and safe shutdown conditions are discussed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2021

Molten Salt Reactor Signatures and Modeling Study

Molten salt reactor (MSR) technologies, either liquid fueled and cooled or only liquid cooled, pose specific, unique challenges for safeguards of the special nuclear material during the operation, fueling, and maintenance of the reactor. MSRs are one type of Generation IV technologies being invested in and considered for U.S. domestic fabrication primarily for electricity and process heat production. These designs have generated growing commercial interest for several reasons, including high (≈40%) thermal efficiency, ease of fueling, improved use of uranium fuel, potential utilization of thorium fuel, and proposed inherent safety features. U.S. companies have several planned designs that differ in fuel, cooling, and neutron energy spectrum. Driven by commercial interest and the intent of licensing MSRs, the U.S. Nuclear Regulatory Commission (NRC) has developed a vision and strategy to accommodate non-light water reactors (LWR), which include MSRs (U.S. Nuclear Regulatory Commission 2019). In addition, the Department of Energy (DOE) through the Office of Nuclear Energy (NE) Office of Advanced Reactor Technologies (ART), …sponsors research, development and deployment (RD&D) activities through its Next Generation Nuclear Plant (NGNP), Advanced Reactor Concepts (ARC), and Advanced Small Modular Reactor (aSMR) programs to promote safety, technical, economical, and environmental advancements of innovative Generation IV nuclear energy technologies. Reactor types considering the use of salts, liquid metals, or gases for coolant fall under both ARC and aSMR. Therefore, Research Design & Development is being pursued by DOE-NE through national laboratories, universities, and international and industrial collaborations. Additionally, the U.S. is a member of the Gen IV International Forum (GIF). The GIF is a cooperative, multinational organization to guide and carry out research and development needed for the GEN IV reactor systems (Forum 2018). GIF evaluated numerous reactor concepts and down-selected to the six most feasible advanced reactor technologies: gas-cooled fast reactor (GFR), lead-cooled fast reactor (LFR), MSR, supercritical watercooled reactor (SCWR), sodium-cooled fast reactor (SFR), and very high temperature reactor (VHTR). In support of the growing interest domestically and internationally, the Materials Protection, Accounting, and Control Technologies (MPACT) campaign, under the DOE-NE Fuel Cycle Technologies (FCT) program, engages in R&D activities by developing advanced instrumentation and analysis for safeguards and security of modern, advanced nuclear fuel cycle (non-LWR) facilities. Because of the historic experience in the operation of the Aircraft Reactor Experiment (ARE) and the Molten Salt Reactor Experiment (MSRE) (Robertson, MSRE Design and Operations Report Part I 1965), Oak Ridge National Laboratory (ORNL) is heavily engaged in the various R&D activities through the DOE complex related to MSRs including national technical leadership of the DOE-NE MSR campaign. This report discusses and presents the outcomes of the FY19 MPACT MSR Safeguards task. The challenges presented by MSRs for nuclear material accountancy and control (NMAC) and associated safeguards will be investigated. The objective of this research is to explore and compile the safeguards requirements and identify measurement signatures through an initial high-level MSR design and develop complementary advanced simulation and modeling capabilities. A high-level ORNL-developed MSR design called the Molten Salt Demonstration Reactor (MSDR) (Bettis, Alexander and Watts 1972) was used as the target reactor design for this research. The MSDR model incorporates technology from the MSRE and the Molten Salt Breeder Reactor (Robertson, Conceptual Design of a Single-Fluid Molten-Salt Breeder Reactor 1971). But the MSDR is a 750 MWth graphite moderated liquid fueled (low-enriched uranium) MSR compared to the MSRE’s of 7.5 MWth. The focus of this report is to discuss the evaluation of novel signatures, correlations, and indicators to understand the applicability of current safeguards instrumentation to MSRs using the modeling results from the MSDR.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2025

Application of Electrochemical Methods to Molten Salt Reactors: Draft TLR Documenting Assessment of Electrochemical Monitoring

Nuclear Regulatory Commission (NRC) is developing the regulatory framework and technical expertise to support regulatory review of advanced non-water reactors, including molten salt reactors (MSRs). In an MSR, it is essential that the salt chemistry be maintained in a desired range in terms of redox potential for reliable operation and mitigation of corrosion to structural materials in the reactor, particularly the reactor vessel and heater exchanger. Measuring the redox potential of the salt in the reactor would also allow for the material lifetimes to be predicted more accurately, and chemical issues to be diagnosed more quickly. In addition to the chemical composition analysis by ICP-MS, electrochemical methods including potentiometry and linear wave scanning (LSC) were also used in molten salt reactor experiment (MSRE) for redox potential monitoring purposes. Electrochemcial methods offers unique advantages such as quick turnaround in results and unique capability of in-line monitoring of redox potential, and are considered popular electroanalytical techniques that can be used to monitor redox potentials and salt chemistry including impurities. The last two decades have seen significant advances in science and engineering of electrochemical methods for potential application to molten salts. The primary goal of this report is to assist NRC in understanding the monitoring of the salt chemistry by electrochemical methods and provide NRC reviewers with necessary information and tools to support regulatory review of MSR designs. This reports consists of two majors parts—Part 1, chemical potential of molten salts and effects by fission process in MSR; Part 2, assessment of electrochemical methods for application to MSRs. The TRLs of the typical relevant electrochemical methods for molten salts were evaluated based on the DOE TRL guidelines and upon a review of the current status of the electrochemical methods for two typical salt systems, fluoride and chloride, for MSRs.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2024

Implementation of a Drift Flux Model into SAM with Development of a Verification and Validation Test Suite for Modeling of Noncondensable Gas Mixtures

The advanced thermal-hydraulic system code, System Analysis Module (SAM), was originally developed for the modeling of single-phase flow in advanced reactors. It has since been expanded to include a four-equation drift flux model for the modeling of two-phase flows containing a noncondensable gas. The model was expanded to support the modeling of molten salt reactor (MSR) designs in which the fuel is directly dissolved in the circulating coolant. These designs have shown that circulating gas bubbles can play an important role in the management of fission products and the operational behavior of the reactor. A drift flux model was implemented to more accurately capture the localized behavior of the void in the core and its impact on the mass transfer of fission products. A thorough assessment of the new model was performed by developing a verification and validation test suite. Verification problems were designed to test all major terms in the new governing equations. The new model converged to the correct solution at the expected order of accuracy for all verification cases. The validation cases included a wide range of flow and void conditions in different pipe geometries. Although higher void experiments show a slight underprediction of void by the drift flux model, experiments that aim to reproduce Molten Salt Reactor Experiment (MSRE) experimental conditions show good agreement with the model. The gas transport model was activated for a SAM model of the MSRE to demonstrate that it can be used in a more complex model. Finally, this gas transport model will be used along with an interfacial area transport equation being implemented in SAM for the prediction of mass transport behavior in MSR conditions.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2024

Molten Salt Reactors: What about Materials? An Overview and Future Needs

ORNL Molten Salt Reactor Experiment (MSRE) – 60’s- early 70’s Developed INOR-8 (aka Hastelloy N); MSRE operated over the period Dec 1965 to 1969. (not continuous); Operated for >13,000 hr at T from ~550 to ~650°C using U, Li-7, Be and Zr fluoride salt fuel; Post-Irradiation Material Evaluation (corrosion + neutron irradiation) of surveillance specimens; Noted ”beneficial effect of Nb” in alloy (on intergranular Te embrittlement) More recent (post-1980) Materials R&D for Gen IV …. Alloys 316L, 316H, 304, Alloy 800H, Alloy 617 (!!), Hastelloy N (mod), plus numerous experimental alloys developed

36 - MATERIALS SCIENCE↗

DOE OSTI2025

Multiphase Species Transport Modeling for Molten Salt Reactors in the System Analysis Module: Generation, Decay, Deposition, and Extraction of Insoluble Fission Products

With the increase of interests in the design and deployment of advanced reactor systems, a desire for simulation tools supporting system analysis of reactor operation and safety is rising. Molten salt reactors (MSRs), one of the advanced reactor systems, utilize liquid fused salt fuel as both coolant and fuel. During operation, MSR generates insoluble fission products, including noble metals and gases. The buildup of these species in fuel salt presents safety concerns as they may deposit on surfaces of critical components and produce excessive decay heat, causing the failure of system components. Timely removal of these noble metals and gases would ensure the safe operation of the reactor system. The dynamic nature of salt fuel system, involving the generation, decay, deposition, and extraction of noble metals and gases, calls for robust species transport models to facilitate system analysis and monitoring, and design of efficient species removal components. This paper concentrates on the development of a computational framework for species transport, consisting of multiphase transport model formulation, mass transfer between phases, numerical implementation in MOOSE environment, verification through Method of Manufacture Solutions (MMS) and validation against experimental data from the Molten Salt Reactor Experiment (MSRE). Integrating this framework into the System Analysis Module (SAM) code further enhances SAM’s capabilities for advanced reactor analysis in the future.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2021

Multiphysics Coupling Methods for Molten Salt Reactor Modeling and Simulation in VERA

New multiphysics coupling capabilities for molten salt reactor (MSR) analysis have been developed in the Virtual Environment for Reactor Applications (VERA). This development consisted of two main efforts. First, a generic species transport module was added in the CTF code, which is the thermal-hydraulics (TH) code for VERA. This module uses the velocity fields for which CTF solves during the TH calculation to transport species through the core and around the primary loop. Additionally, a gas sparging model has been added to CTF to model the movement of certain species, namely, fission products such as xenon gas, to transport between the molten salt and gas bubbles present in the salt. The second effort in this development was coupling this capability to VERA’s neutron transport code MPACT. This effort focused on coupling the detailed TH transport models in CTF to MPACT to account for feedback effects in the neutron transport calculations. Finally, the thermochemistry code Thermochimica has also been coupled to VERA. Thermochimica performs pointwise calculations for chemical potential and Gibbs free energy and determines what phases are produced by the temperature, pressure, and elemental concentrations at different locations in the primary loop. These capabilities are demonstrated using a model of the Molten Salt Reactor Experiment (MSRE). Furthermore, this reactor operated at Oak Ridge National Laboratory in the 1960s, providing sources of experimental data that were used to develop the model. Various combinations of species were modeled using VERA’s new multiphysics coupling capabilities. Species distributions and reactivity effects behaved as expected for the MSRE model, demonstrating that the coupling is behaving correctly and causing appropriate feedback. The results of these calculations show the potential for VERA to be used for a wide variety of MSR analyses.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2022

Steady-state radiochemical transport model of the molten salt reactor experiment

A radiochemical transport model of the Molten Salt Reactor Experiment (MSRE) was formulated based on the material derivative featuring system level 1-D flow providing spatial dependence accounting for multiple phenomena including radioactive decay, chemical removal, and fuel depletion across custom volume regions. Further, the steady-state version, which is based on a system of ODE's, can be solved efficiently and is useful for sensitivity studies utilizing Monte Carlo sampling. Accounting for multiple phenomena in a fully coupled model is necessary to understand the complexities of transport and distribution of radionuclides throughout the primary loop of a flowing fuel reactor.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

DOE OSTI2022

Transient convective delayed neutron precursor of {sup 235}U for the molten salt reactor experiment

This work investigates the delayed neutron precursors from the fission of {sup 235}U in molten salt reactors. The six delayed neutron groups predict the spatial distribution of the advective transport for radioactive mass transfer in the molten-salt reactor experiment (MSRE). The Mole code, using the framework of the Multiphysics Object-Oriented Simulation Environment (MOOSE), was used to compute the delayed neutron concentration of the whole system. This approach can be used for analysis of reactivity in circulating conditions. The effect of delayed neutron concentrations on the static or dynamic behavior of the system in MSRE was analyzed. Using this approach, the pattern and validation of delayed neutron for a range of parameters of interest are reported and discussed herein. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2023

CNRS Molten Salt Reactor Benchmark Analysis Using Griffin-Pronghorn Coupled Multi-physics Code System

Molten salt reactors (MSRs) with flowing fuel have the unique feature of utilizing the fuel salt for heat generation and extraction at the same time, since the fuel salt is circulating through the whole primary loop. This movement of fuel salt results in a partial decay of the delayed neutron precursors (DNPs) outside the core and the corresponding redistribution of the DNPs in the active region of the core. To capture this effect, neutronics and thermal-hydraulics (T/H) codes need to be able to handle the movement of DNPs and their decay [1, 2]. Idaho National Laboratory (INL) is actively working on developing the neutronics and T/H codes to model the MSRs with flowing fuel. As one of the efforts, the neutronics code Griffin [3] and the T/H code Pronghorn [4] that are built upon the MOOSE framework [5] have been extended to handle the flowing fuel involving the drift of DNPs, and this capability is being tested and verified with MSR benchmark problems including the CNRS benchmark problem [6]. Additionally, a multi-physics analysis of the molten salt reactor experiment (MSRE) is being conducted to verify and validate the codes against available experimental data [7]. This work presents the analysis of the CNRS benchmark problem using the Griffin-Pronghorn coupled multi-physics code system of INL. Both steady-state and transient problems are analyzed, and the results are compared with those of other participants presented in [6]. The following section provides a description of the benchmark, along with input parameters and observables for each step. Then, the results for each step are presented in comparison with other participants’ results, followed by summary and conclusion.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2024

Bubble Mass Transport Measurement in the Large-Scale Test Loops at Oak Ridge National Laboratory

Molten salts are complex fluids that incorporate multi-phase behavior depending on the chemistry and the physical properties of the entrained components. These components include the carrier salt, the actinide fuel, and fission, activation, and corrosion products, the concentrations of which depends on the burnup history of the salt. Radionuclide transport from the salt into the cover gas / off-gas system depends on volatility as predicted by thermochemistry, but data from the Molten Salt Reactor Experiment (MSRE) conducted in the late 1960s suggest that bubble formation and transport are also important. Anomalously high fractions of noble metals were found in the off-gas system and were attributed to transportation with parent salt aerosols and their association with rising noble gas bubbles. The prediction of such phenomena requires coupled neutronic, thermal hydraulic, and chemical equilibrium calculations, the framework of which is being developed within the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program supported by the US Department of Energy (DOE) Office of Nuclear Energy (NE). However, separate effects tests and models of experiments using tools such as SAM and Thermochimica can guide model developers through important processes. Conversely, model development guides the choice of experiments and systems to provide data that are relevant for validation. This report describes several experiments that tracked gas transport in molten salts, ranging from small-scale systems to large-scale loops. Gas transportation in a molten salt, LiCl-KCl, has been studied using the shadowgraph technique. Sensors such as residual gas analysis, Raman spectroscopy, and laser-induced breakdown spectroscopy have been tested for off-gas measurements. These data were used to interpret how the gases move through the upstream salt / cover gas and the interface between them. Differential pressure measurements were able to detect individual gas bubbles as they popped at the liquid–gas interface. Salt aerosols were collected on a cascade impactor. Their formation was also observed directly via the shadowgraph method, and most of these aerosols were launched ballistically into the cover gas. Fine mists could also be observed. Convection currents through the salt were visualized and can be used to calculate the thermophysical properties of the salt itself. The apparatuses described in this report and in a previous work (McFarlane et al. 2023) have been commissioned and are available for use in making further measurements of salt/surrogate fission product behavior. Novel approaches using neutron imaging are planned for the study of fluoride salts, which cannot be contained in quartz, so shadowgraph visualization is not available. Bubble transport in convective flow and in a slow-moving salt column are planned. The mobile laser-induced breakdown spectroscopy (LIBS) system is available for several applications, including iodine capture in a molten hydroxide scrubber, H2 transport though molten salts to complement Raman analysis, and online tracking of salt aerosol generation, transport, and deposition. This report summarizes the findings from FY24 and the plans for FY25. The work completes milestone M2AT-24OR0702013 of the DOE-NE Advanced Reactor Technology, Molten Salt Reactor Campaign, DOE-NE-5.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2019

Assessment on the Practicality of Off-the-Shelf Valves for Use in Molten Salt

From the mid to late 1960s, the Molten Salt Reactor Experiment (MSRE) was operated at Oak Ridge National Laboratory (ORNL). The MSRE design is unique: instead of standard valves, freeze valves were used to isolate the fluid salt as needed. While standard valves were considered for use in the MSRE, key design challenges (leaking, corrosion, valve alignment, and cold-welding, etc.) were all avoided by choosing a freeze type valve. While the freeze valves were integral to the MSRE’s success, they do not respond quickly, and they are not capable of throttling flow: two key features important to commercial operation and test facilities. More than half a century after the MSRE’s inception, design and manufacturing capabilities have changed. There is a renewed interest in molten salts for energy storage in nuclear and concentrated solar power. Therefore, there is a strong desire to have a functioning valve that can be obtained off the shelf or with minimal modification to a custom valve. This research addresses the known challenges associated with valve selection in fluoride salts, provides guidelines as to potential options for selection of a valve, and uses these guidelines to select a valve for testing in ORNL’s Liquid Salt Test Loop (LSTL).

Howard, Trevor↗

DOE OSTI2023

Noble Gas Transport in the MSRE

This study explores the relationship between the physicochemical parameter known as Henry’s gas constant and gas transport across a two-layer film interface. The investigation utilized the Gibbs free energy, incorporating surface and volume terms to elucidate trends in enthalpy and entropy. Notably, our findings align with experimental data and offer predictive insights into the Henry’s gas constants for helium and krypton, which hold significance for future experiments and theoretical developments. Furthermore, this study enhances the Gibbs free energy theory pertaining to the liquid–gas interface. It underscores the substantial contribution of noble gases in this region to volumetric energy as temperature increases. Additionally, we employed Monte Carlo simulations to analyze the effective thermal neutron multiplication factor, denoted as k eff . Our analysis reveals a linear correlation between graphite density and uniform density as a function of temperature. For the 1D Molten Salt Reactor Experiment (MSRE) system, we employed the Mole code to conduct heat and mass transfer calculations. These computations enable us to ascertain the distribution of fuel temperature based on coefficients and thermal properties. We also studied delayed neutron precursors during fuel cycling, taking into account the drift of cycling fuel through Mole–Griffin coupling. Our model represents k eff and β eff across various volume flow rates and salinity compositions. Finally, this study leveraged xenon-135 for continuous on-line monitoring of fuel salts to investigate the impact of steady-state xenon-135 on the MSRE and to better understand its distribution. These efforts build upon previous research related to removal processes.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗