Search NASA⌕ Search

SEARCH · Search NASA

Results for “Multiple impurities”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Characterization of Impure Plutonium Oxide Neutron Calibration Standards through Evaluation by Neutron Multiplicity Equations

Plutonium oxide calibration standards STD4C, STD6C and STD8C have been historically used, and are currently the only MT52 standards in use, for calibration and measurement control program of Passive/Active Neutron Coincidence Counter known as PAN1 at PF-4. In this paper, previously measured high-statistics data are used in conjunction with neutron multiplicity equations to determine multiplication M and α parameter of these standards as the explicit knowledge of these parameters may allow quantification of precision and bias of accountability measurements of different material types and matrices of items.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Multiple Carrier Generation at an Exceptionally Low Energy Threshold

Multiple carrier generation (MCG), a process wherein two or more carriers are generated from a single high-energy absorbed photon, holds immense promise for quantum sensing, metrology, low-threshold lasers, and photovoltaics. Despite its potential, MCG has faced obstacles such as low efficiency and a high threshold photon energy at least twice the band gap (2?Eg) of the semiconductor, limiting its application only to a class of materials with low Eg. Here, we present a new approach that overcomes this limitation by leveraging carrier-donor scattering to excite secondary electrons from donor states strategically positioned below the conduction band. Our method relies on strong Coulomb interaction, reduced dielectric screening, slow hot carrier cooling, and strictly follows the energy conservation rules. We experimentally demonstrated this idea in a model system of monolayer (1L) MoS2 by exploiting electron-donating chalcogen vacancy states. We observed an exceptionally low MCG threshold of ~1.12?Eg for the first time in 1L MoS2. Remarkably, the quantum yield can be further increased to >3 by increasing the photon energy to 1.65?Eg, representing a substantial advancement over existing methods. Our findings extend the horizon of MCG into next-generation high-performance optoelectronic devices with an on-demand operating spectral range spanning from infrared to ultraviolet.

CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS↗
DOE OSTI2025

Conversion of Compositionally Diverse Plastic Waste over Earth-Abundant Sulfides

Chemical deconstruction of polyolefin plastic wastes via hydroconversion is promising for mitigating plastic accumulation in landfills and the environment. However, hydroconversion catalysts cannot handle complex feedstocks containing multiple polymers, additives, and heteroatom impurities. Here, we report a single-step strategy using earth-abundant metal sulfide catalysts to deconstruct these wastes. We show that NiMoS x /HY catalysts deconstruct polyolefin feedstocks, achieving ~81–94% selectivity to liquid products. Postsynthetic zeolite modification enhances the catalyst’s activity by >2.5 times, achieving over 95% selectivity to liquid fuels with controllable product distribution in the naphtha, jet fuel, and diesel range. The catalyst is resilient to increasingly complex feedstocks, such as additive-containing polymers and mixed plastics composed of polyolefins and heteroatom-containing polymers, including poly(vinyl chloride). As a result, we extend the strategy to single-use polyolefin wastes that can generate toxic byproducts, such as HCl and NH 3 , and eliminate their emissions by integrating reaction and sorption in a one-step process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Effect of rotation on negative triangularity plasmas in DIII-D

At the DIII-D tokamak, plasmas with negative triangularity (NT) have been found to have similar energy confinement times as H-mode plasmas with positive triangularity. These NT plasmas also have a stable edge that inhibits H-mode, lacks dangerous edge transients, and has naturally low impurity confinement. For these reasons, NT plasmas have the potential to be a transformative reactor scenario. To determine the importance of strong co-current neutral beam torque for NT performance at DIII-D, scans of neutral beam torque at constant neutral beam power have been performed. These scans have shown that the energy confinement time for a basic, inductive NT scenario (q 95 ≈ 2.8) decreases by 16% when torque is reduced to reactor levels. This reduction in confinement can be replicated with gyrofluid modeling that isolates the role of E x B shear in the change in transport. In a separate set of discharges with lower plasma current (q 95 ≈ 2.5), no significant correlation between confinement time and rotation was found. Throughout this investigation, excellent MHD stability was observed, even with very low toroidal rotation. Further, low impurity confinement was found at multiple rotation levels. Throughout the campaign, rotation near the edge was counter-current, consistent with the measurement of counter-current intrinsic edge rotation, and these observations agree with NT results from the TCV tokamak.

confinement↗
DOE OSTI2021

Yu-Shiba-Rusinov states and ordering of magnetic impurities near the boundary of a superconducting nanowire

We theoretically study the spectrum induced by one and two magnetic impurities near the boundary of a one-dimensional nanowire in proximity to a conventional s-wave superconductor and extract the ground-state magnetic configuration. We show that the energies of the subgap states, supported by the magnetic impurities, are strongly affected by the boundary for distances less than the superconducting coherence length. In particular, when the impurity is moved towards the boundary, multiple quantum phase transitions periodically occur in which the parity of the superconducting condensate oscillates between even and odd. We find that the magnetic ground-state configuration of two magnetic impurities depends not only on the distance between them, but also explicitly on their distance away from the boundary of the nanowire. As a consequence, the magnetic ground state can switch from ferromagnetic to antiferromagnetic while keeping the interimpurity distance unaltered by simultaneously moving both impurities away from the boundary. The ground-state magnetic configuration of two impurities is found analytically in the weak coupling regime and exactly for an arbitrary impurity coupling strength using numerical tight-binding simulations.

1-dimensional systems↗
DOE OSTI2024

Effect of Si impurities on microstructure and tensile properties of a cast Al-Mg-Fe alloy

Al-Mg alloys are attractive for structural castings owing to their superior strength and ductility in the as-cast state. However, given the tight tolerance for impurities, Al-Mg alloys produced from secondary sources still face multiple challenges. Here, we report the effect of increased Si impurity (0.05–1.6 wt%), which is commonly found in secondary Al sources, on microstructure and tensile properties of a cast Al-4.3Mg-1.6Fe (wt%) alloy, commercially referred to as Castaduct-42 alloy. Microstructural characterization revealed that Si addition increased the volume fraction, size, and aspect ratio of primary Al13Fe4 intermetallic particles as well as the volume fraction of other binary and ternary eutectic phases. Tensile testing results demonstrated that increasing Si impurities from 0.05 to 1.6 wt% reduced ductility from 14.3 ± 1.4 % to 2.2 ± 1.0 %. A particle cracking damage accumulation model coupled with failure analysis indicated primary Al13Fe4 intermetallic particles to be the major contributing factor to the deterioration in ductility with increasing Si content. Additionally, the stabilizing effect of Si on primary Al 13 Fe 4 was inconsistent with the CALPHAD calculation results based on existing CALPHAD databases which predict a slightly decreasing primary Al13Fe4 phase fraction with increasing Si concentration. This work provides new insights into the phase stability and mechanical behavior of the lesser studied Al-Mg-Fe-Si alloy system that will contribute to the development of sustainable cast Al-Mg based alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Current-enabled optical conductivity of superconductors

In most superconductors, optical excitations require impurity scattering or the presence of multiple bands. This is because in clean single-band superconductors, the combination of particle-hole and inversion symmetries prevents momentum-conserving transitions. In this Letter we show how the flow of supercurrent can lead to new contributions to optical conductivity. As the supercurrent breaks inversion symmetry, transitions across the superconducting gap become allowed even in clean superconductors and dominate over impurity-induced contributions for energies comparable to the gap width. Further, the response is dependent on the nature of the underlying normal state as well as on the type of superconducting order. Use of an external magnetic field to produce a screening supercurrent with controllable magnitude and direction, enables a detailed investigation of the superconducting state, allowing determination of the gap symmetry in unconventional superconductors for which other techniques have not been practicable.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Defects of perovskite semiconductor CsPbBr3 investigated via photoluminescence and thermally stimulated current spectroscopies

Halide perovskites are essential materials for hard radiation detectors at ambient temperature. To improve detector performance, charge transport must be investigated and optimized. Using photoluminescence (PL) and thermally stimulated current (TSC) spectroscopies, we investigate photogenerated charge carriers in Bridgman-grown CsPbBr3 single crystals to understand the nature of charge transport. PL spectroscopy of these halide perovskites revealed the presence of strong emission bands at the band edge, which were attributed to free or bound excitons. It is shown that a wide broadening of the excitonic linewidth in these halide perovskites arises from strong exciton–phonon coupling, which is substantially dominated by longitudinal optical phonons via Fröhlich interaction. An additional contribution due to the presence of ionized impurities was also observed. Crystals with a detectable sensitivity to high-energy gamma radiation are characterized by a higher intensity and a narrower linewidth of the principal PL peak at 2.326 eV. Defect states beyond 2.214 eV have a negative impact on detector sensitivity to high-energy gamma radiation. TSC spectroscopy reveals an array of trap levels spanning 0.15–0.70 eV, attributed to intrinsic point defects and multiple extrinsic defects involving dopants or impurities. Defects identified included Cs and Br vacancies, as well as Pb interstitials with concentrations in the 1011–1016 cm−3 range. Understanding how the synthesis process impacts the types and concentrations of the defects present is currently under investigation. Elimination or suppression of the defect/trap states should result in halide perovskite materials with longer carrier diffusion lengths and improved detector characteristics.

Physics↗
DOE OSTI2020

Robust impurity detection and tracking for tokamaks

A robust impurity detection and tracking code, able to generate large sets of dust tracks from tokamak camera footage, is presented. This machine learning–based code is tested with cameras from the Joint European Torus, Doublet-III-D, and Magnum-PSI and is able to generate dust tracks with a 65 – 100 % classification accuracy. Moreover, the number dust particles detected from a single camera shot can be up to the order of 1000. Several areas of improvement for the code are highlighted, such as generating more significant training data sets and accounting for selection biases. Finally, although the code is tested with dust in single two-dimensional camera views, it could easily be applied to multiple-camera stereoscopic reconstruction or nondust impurities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

First use of an InSb crystal for x-ray imaging spectroscopy of highly ionized tungsten in the Wendelstein 7-X stellarator

Advances in time and space resolved measurements of highly charged states of tungsten (W) through x-ray imaging spectroscopy have enabled investigation of impurity transport in the Wendelstein 7-X (W7-X) stellarator. The high-resolution x-ray imaging spectrometer (HR-XIS) system on W7-X utilizes the Bragg diffraction properties of a set of multiple crystals to measure a range of impurity emission lines within sections of the 1–7 Å wavelength range, including transitions of W. A new indium–antimonide crystal has been installed on the HR-XIS system to allow viewing of the 5.5–6.2 Å region focusing on emissions of W. Consequently, many bright W emission lines from W 40+ to W 47+ were observed in this wavelength range, both in plasmas with injected W and in those with only intrinsic W impurity sources, showing the high sensitivity of the diagnostic. Three W 46+ emissions correspond in wavelength and intensity with calculated photon emissivity coefficients and can be exploited for W transport and concentration applications in plasmas with T e ≳ 2.1 keV. Here, an estimate of the core W density behavior in two separate turbulence-reduced ‘high-performance’ (HP) discharges on W7-X is done using the 5.6893 Å W 46+ line. The n W behavior in HP scenarios can be explained by previous experimental results and neoclassical predictions.

XICS↗
DOE OSTI2022

Visualizing discrete Fermi surfaces and possible nodal-line to Weyl state evolution in ZrSiTe

Topological nodal line semimetals (TNLSMs) represent a quantum state of topological matter. When the crystal/time-reversal symmetry is broken, a nodal line state is expected to evolve into a Dirac semimetal, a Weyl semimetal, or other topological phases according to theoretical studies. Here, we report scanning tunneling microscopy (STM) based quasiparticle interference (QPI) measurements performed on the surface of TNLSM ZrSiTe single crystal. A discrete Fermi surface with multiple electron/hole pockets and the impurity-induced inter-/intra- pockets scatterings are directly visualized from QPI patterns. Moreover, the degenerated Dirac points at X point evolve into the pairs of Weyl nodes when Fe atoms are deposited, suggesting a possible phase transition from the nodal line to the Weyl state. The calculated band structures and the Weyl points by applying Zeeman splitting energies along x-direction, further confirm the existence of Weyl points in the Fe-doped ZrSiTe induced by the broken of time-reversal symmetry.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Trace Impurities Identified as Forensic Signatures in CMX-5 Fuel Pellets Using X-ray Spectroscopic Techniques

We report that small-particle analysis is a highly promising emerging forensic tool for analysis of interdicted special nuclear materials. Integration of microstructural, morphological, compositional, and molecular impurity signatures could provide significant advancements in forensic capabilities. We have applied rapid, high-sensitivity, hard X-ray synchrotron chemical imaging to analyze impurity signatures in two differently fabricated fuel pellets from the 5th Collaborative Materials Exercise (CMX5) of the IAEA Nuclear Forensics International Working Group. The spatial distributions, chemical compositions, and morphological and molecular characteristics of impurities were evaluated using X-ray absorption near-edge structure (XANES) and X-ray fluorescence chemical imaging to discover principal impurities, their granularity, particle sizes, modes of occurrence (distinct grains vs incorporation in the UO 2 lattice), and sources and mechanisms of incorporation. Differences in UO 2+x stoichiometry were detected at the microscale in nominally identical UO 2 ceramics (CMX5-A and CMX5-B), implying the presence of multiple UO 2 host phases with characteristic microstructures and feedstock compositions. Al, Fe, Ni, W, and Zr impurities and integrated impurity signature analysis identified distinctly different pellet synthesis and processing methods. For example, two different Al, W, and Zr populations in the CMX5-B sample indicated a more complex processing history than the CMX5-A sample. K-edge XANES measurements reveal both metallic and oxide forms of Fe and Ni but with different proportions between each sample. Altogether, these observations suggest multiple sources of impurities, including fabrication (e.g., force-sieving) and feedstock (mineral oxides). This study demonstrates the potential of synchrotron techniques to integrate different signatures across length scales (angstrom to micrometer) to detect and differentiate between contrasting UO 2 fuel fabrication techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Performance Characterization of FB-Line Neutron Multiplicity Counter and Large Neutron Multiplicity Counter

Savanah River National Laboratory’s (SRNL) Nuclear Measurements group was tasked with characterizing the performance of two neutron multiplicity counters located at SRNL. Characterization measurements were made to determine the gate width, pre-delay, deadtime parameters, triples and doubles gate fractions, detector efficiency, and operating high voltage for the Large Neutron Multiplicity Counter (LNMC) and the FB Line Neutron Multiplicity Counter (FBLNMC). The parameters were determined, shown below, and were, as to be expected, slightly different than the previous calibrations, which were performed over 20 years ago. Several Pu samples were measured to validate the characterizations of the FBLNMC and LNMC. The measurements determined the sample Pu-240 mass within <2% deviation for the pure plutonium samples and ~8% for the mixed oxide sample. The pure Pu samples had significantly better accuracy compared with the impure mixed oxide sample due to the lack of induced fission or alpha,n neutrons from impurities. Overall, the characterization of the neutron multiplicity counters, and the determination of their operability has been completed successfully.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

Effect of outer divertor leg detachment on the high field side scrape-off layer in DIII-D and ASDEX Upgrade

In this work, evidence is presented that detachment of the outer divertor leg leads to a reduction of electron density and neutral pressure in the high-field side (HFS) scrape-off layer (SOL) of the ASDEX Upgrade (AUG) and DIII-D tokamaks with ion $B$ x $∇B$ drift directed toward the X-point (favorable configuration). These results are observed across multiple diagnostics and without the use of impurity seeding to reach detachment. In AUG, outer divertor leg detachment correlates with a decrease in electron density near the separatrix at the inner midplane, measured with HFS reflectometry. A concurrent reduction in inner divertor density and neutral pressure at the inner target is observed using divertor Thomson scattering and neutral pressure gauges. These effects are present in both L- and H-mode plasmas. In DIII-D, a similar reduction is detected through analysis of line-integrated hydrogenic emission measured by multiple diagnostics in the HFS SOL close to the separatrix. The consistent trends in both devices indicate that high electron density and strong hydrogenic emissivity in the HFS SOL are common features of H-mode plasmas in the favorable configuration, independent of wall material and divertor geometry. In L-mode plasmas, the reduction in electron density and neutral pressure is not observed in DIII-D, possibly due to differences in wall material. These results emphasize the importance of the divertor state in determining the two-dimensional neutral distribution and edge fueling.

detachment↗
DOE OSTI2023

Topological symplectic Kondo effect

Multiple conduction channels interacting with a quantum impurity—a spin in the conventional “multichannel Kondo effect” or a topological mesoscopic device (“topological Kondo effect”)—has been proposed as a platform to realize anyonic quasiparticles. However, the above implementations require either perfect channel symmetry or the use of Majorana fermions. Here, in this work, we propose a Majorana-free mesoscopic setup which implements the Kondo effect of the symplectic Lie group and can harbor emergent anyons (including Majorana fermions, Fibonacci anyons, and parafermions) even in the absence of perfect channel symmetry. In addition to the detailed prescription of the implementation, we present the strong coupling solution by mapping the model to the multichannel Kondo effect associated to an internal symmetry and exploit conformal field theory to predict the nontrivial scaling of a variety of observables, including conductance, as a function of temperature. This work does not only open the door for robust Kondo-based anyon platforms, but also sheds light on the physics of strongly correlated materials with competing order parameters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Trace impurity transport in multi-species plasmas with large particle fluxes

A burning fusion plasma has a large inwards flux of fuel and outwards flux of ash. Existing impurity transport theories do not account for a steady-state environment of such large fluxes. In this paper, we extend classical transport theory to account for a background of such fluxes. In a mainly two-ion species magnetized plasma, with oppositely directed density gradients maintained by oppositely directed sources of the two species, trace impurity ions are shown to align with the larger mass ions. This unexpected behavior is derived analytically and simulated numerically using the MITNS (Multiple-Ion Transport Numerical Solver) code. Overall, the result suggests a potential advantage of edge-fueled p-B11 fusion in extracting high-Z impurities, and possible applications in plasma-based separation methods.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Carbon-related donor–acceptor pair transition in the infrared in h-BN

Experimental studies of intentionally doped impurities for the understanding of conductivity control in hexagonal boron nitride (h-BN) ultrawide bandgap (UWBG) semiconductor are limited but are highly desired for emerging applications of h-BN. We report synthesis by hydride vapor phase epitaxy and comparison photoluminescence (PL) emission spectroscopy studies of intentionally carbon (C)-doped and undoped h-BN semi-bulk crystals. In addition to the well-known C-related emission lines observed previously, a C-impurity-related transition near 1.31 eV consisting of multiple phonon replicas has been observed in C-doped h-BN at room temperature. Phonon replicas involved in the 1.31 eV emission have been identified using polarization resolve PL spectroscopy as the transverse acoustic (TA)/longitudinal acoustic (LA) and out-of-plane optical phonon (ZO) modes at the middle point, T, between the Γ- and K-points in the first Brillouin zone. Based on the agreement between the spectral peak position of the observed dominant emission line at 1.31 eV and the calculated energy-level separation between CB donor (carbon replacing boron) and Ci acceptor (carbon interstitial), the observed IR emission line can be decisively assigned to the donor–acceptor pair (DAP) transition involving the CB donor and Ci acceptor assisted by the intervalley (Κ → Μ) scattering processes. The results reinforce the perception that C impurities form deep-level centers and provided an improved understanding of C impurities in h-BN.

Physics↗