Search NASA⌕ Search

SEARCH · Search NASA

Results for “NCS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Status of Shift for NCS Applications in SCALE 6.3 [Slides]

Shift can run most KENO V.a and KENO-VI inputs, but beware of small geometry fudge factors. Shift is faster than KENO for fast spectrum systems, but has a higher uncertainty per particle. KENO FoM is higher for thermal systems. KENO V.a in MG is significantly faster than KENO V.a in CE, so this may exacerbate Shift difference. Shift generally has greater speedup for parallel calculations. Shift has only IFP available for TSUNAMI-3D, but parallel calculations are enabled.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

TEX 2.0: DOE-EM NCS Experimental Needs [Slides]

This presentation touches on the needs presented from recent work with Hanford Tank Farms (HTF) and Savannah River Site (SRS) Liquid Waste Process (LWP). The Meetings were held with other sites by presenting information about TEX 2.0 and having discussions on what the current challenges were for criticality safety validation.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2023

Status of ANS-8 and TC85/SC5/WG8 NCS Consensus Standards [Slides]

This presentation covers ANS-8 and its status. The presentation starts with an introduction into ongoing projects. Including touching upon on ANS standard development steps and a status report. Finally, the lecture covers ISO WG8 Standards. with a special focus on recent ISO TC85/SC5 Plenary in Tsukuba, Japan and ISO development process + road map and a final status report.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
DOE OSTI2026

Variable Surface Termination and Ligand Passivation of Lead Sulfide Nanocrystals Synthesized with Excess Lead Chloride

The surface termination and ligand passivation of semiconducting nanocrystals (NCs) impact the stability, optical properties, and self-assembly of NCs. In this work, we definitively characterize the surface of lead sulfide (PbS) NCs synthesized from excess PbCl 2 . With a combination of small-angle neutron scattering (SANS), photoluminescence, and 1D and 2D NMR experiments, we show that the surface termination of PbS NCs depends on the presence of PbCl 2 during ligand exchange. When excess PbCl 2 is removed prior to ligand exchange, PbS[RNH 3 + Cl – ] NCs are obtained, which are terminated by a monolayer of PbCl x on the {100} PbS facet and passivated by oleylammonium chloride ligands. On the other hand, when excess PbCl 2 remains in solution during ligand exchange, lead oleate forms and attaches to the {111} PbS facets of PbS[RNH 3 + Cl – ] NCs, creating PbS@PbCl x NCs. PbS@PbCl x NCs are coated in an epitaxial layer of PbCl x on both the {100} PbS and {111} PbS facets, making them 0.3–0.4 nm larger on average than PbS[RNH 3 + Cl – ] NCs with identical absorption wavelengths. Additionally, PbS@PbCl x NCs have a consistently higher photoluminescence quantum yield and longer photoluminescence lifetimes than PbS[RNH 3 + Cl – ] NCs. This study clarifies the surface structure of PbS NCs synthesized from excess PbCl 2 , highlighting ligand exchange strategies and reconciling observations from across the literature.

Anions↗
DOE OSTI2024

Machine Learning of Performance Space Mapping for the DPD Simulation of Drug Delivery to Endothelial Cells

Despite huge effort over the years, the design of functionalised nanocarriers (NCs) for targeted drug delivery to endothelial cells is still to be completely unveiled. Dissipative particle dynamics (DPD) simulation is used to study the adhesion of NCs to endothelial cells under the influence of series of parameters such as shape, size, and ligand density of the NCs. However, preparing a performance space mapping that illustrates the penetration depths of NCs as a function of variations in their properties requires simulations of all possible NCs with the above-mentioned properties, which is not feasible. This challenge was addressed by leveraging a Gaussian process regression (GPR)-informed active learning strategy and an extensive exploration of numerous samples, each representing different properties of NCs. The performance space mapping reveals that NCs with rod and disc shapes exhibit superior penetration capabilities compared to those with a spherical shape. Furthermore, it demonstrates that smaller-sized rod-shaped NCs and larger-sized disc-shaped NCs tend to achieve better penetration. When considering smaller NCs, the influence of ligand density appears to be limited. On the contrary, for larger NCs, an increase in ligand density correlates with greater penetration depth, underscoring its substantial role in shaping their penetration capabilities.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Dynamic Nuclear Polarization Enhanced 113 Cd Solid-State Nuclear Magnetic Resonance Spectroscopy Reveals CdSe Nanocrystals with Triangular Two-Dimensional Projections are Terminated by {100} Facets

Surface structure plays an important role in particle growth and determining the chemical and photophysical properties of semiconductor nanocrystals (NCs). Therefore, there is a need for structural tools that can characterize and detect different surface facets. Here, we sought to investigate the structure of {111} CdSe facets by applying dynamic nuclear polarization (DNP) enhanced 113 Cd and 77 Se solid-state nuclear magnetic resonance (SSNMR) spectroscopy to zinc-blende CdSe NCs that exhibit triangular two-dimensional (2D) projections within transmission electron microscope (TEM) images. It was originally hypothesized in the literature that these CdSe NCs were tetrahedral in shape and terminated by facets from the {111} family of lattice planes of the zinc-blende structure. Surprisingly, we observe 113 Cd NMR spectra indicating that the primary facets are from the {100} family of lattice planes. We also obtained DNP-enhanced 113 Cd and 77 Se SSNMR spectra of recently reported right trigonal bipyramidal (rTriBP) CdSe NCs grown by seeded growth. The 113 Cd NMR spectra rTriBP CdSe NCs are consistent with {100} surface facets. TEM images show that rTriBP NCs may also exhibit triangular 2D projections that are similar to the so-called tetrahedral NCs. Based upon these results, we conclude that the so-called tetrahedral NCs are predominantly terminated by {100} surface facets and most likely have the same shape as rTriBP NCs. These results highlight the need for multiple complementary techniques when assigning the shape and surface termination of NCs.

Santhiran, Anuluxan [Ames Laboratory (AMES), Ames,↗
DOE OSTI2022

Y-12 Nuclear Criticality Safety Program Health Model: Development, Use and Benefits

The Y-12 National Security Complex (Y-12) operates seven diverse enriched uranium processing facilities and maintains a comprehensive nuclear criticality safety (NCS) program. Given the magnitude of the hazard, the NCS program receives significant oversight. Describing the scope and health of the Y-12 NCS program to sometimes non-expert stakeholders with limited time had historically focused on recent events and “hot topics” which did not always convey sufficient context (i.e., how to differentiate between an individual performance issue and a systemic concern). Y-12 created the NCS Program Health (NCSPH) Model to provide a complete and holistic framework to quantify and communicate NCS program health. The model is constructed in a tiered fashion with the top tier broken into three (3) Tier 2 elements, fourteen (14) Tier 3 elements, and 104 Tier 4 and 5 elements. This granularity ensures every feature of the NCS Program is accounted for and stakeholders can see how these features support the collective whole. The model is used as the framework for NCS communications including program plans, reports, health surveys, and meeting agendas. The model has substantially improved stakeholder appreciation for the entirety of the NCS program and how events and assessment results factor into an overarching conclusion on NCS program health. While some details are Y-12 specific, the NCSPH model can easily be tailored for any other site with an NCS program.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Sensitized Near-Infrared Emission of SiGe Nanocrystals via Heterostructuring with Quasi Two-Dimensional Perovskite

The near-infrared (NIR) emission of silicon–germanium alloy nanocrystals (SiGe NCs) was sensitized by heterostructuring with a quasi two-dimensional (Q-2D) perovskite (CsPbBr 3 blended with butylammonium bromide (BABr)). Colloidal SiGe NCs were synthesized by using a nonthermal plasma method with chloride precursors. As-synthesized SiGe NCs showed no detectable photoluminescence (PL). Embedding the SiGe NCs within the perovskite matrix via spin coating led to a heterostructure exhibiting dual emissions: green emission at 520 nm from the perovskite and NIR emission at 1035 nm from the SiGe NCs. Time-integrated and resolved PL measurements and transient absorption spectroscopy revealed energy transfer from the perovskite to the SiGe NCs, which sensitized the NIR emission from the SiGe NCs and quenched the green PL for the perovskite. These results demonstrate that Ge alloying can effectively tune the bandgap of Si NCs and highlight the feasibility of heterostructuring perovskites and photoluminescent NCs to enhance or activate their PL. In conclusion, this approach broadens their potential applications in the NIR region.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Dynamically tunable multicolor emissions from zero-dimensional Cs 3 LnCl 6 (Ln: europium and terbium) nanocrystals with wide color gamut

This study demonstrates dynamically tunable multicolor emissions from a single component, zero-dimensional (0-D) cesium europium chloride (Cs 3 EuCl 6 ) and cesium terbium chloride (Cs 3 TbCl 6 ) nanocrystals (NCs). Highly uniform colloidal Cs 3 EuCl 6 and Cs 3 TbCl 6 NCs are synthesized via the heating-up method. Excitation-wavelength-dependent multicolor emissions from Cs 3 EuCl 6 and Cs 3 TbCl 6 NCs are observed. Under excitation of 330–400 nm, both NCs exhibit blue photoluminescence (PL). Under wavelengths shorter than 330 nm, characteristic red and green emissions are observed from Cs 3 EuCl 6 and Cs 3 TbCl 6 , respectively, owing to the atomic emissions from the f-orbitals in trivalent europium (Eu 3+ ) and terbium (Tb 3+ ) ions. Cs 3 EuCl 6 and Cs 3 TbCl 6 NCs exhibit broadband excitation spectra and enhanced absorption properties. Particularly, Cs 3 EuCl 6 NCs exhibit a very narrow full-width at half-maximum in both blue and red PL and no overlap between the two spectra. Further, the photophysical properties of these NCs are further investigated to understand the multicolor PL origins by time-resolved and temperature-dependent PL measurements. Finally, the potential applications of Cs 3 EuCl 6 and Cs 3 TbCl 6 NCs as anti-counterfeiting inks for high-level security are demonstrated. Given their broadband excitation with enhanced absorption properties and dynamically tunable colors with a wide color gamut, Cs 3 EuCl 6 and Cs 3 TbCl 6 NCs have great potential as novel multicolor NC emitters for many emerging applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Analysis of the thermodynamic stability of ThO 2 and UO 2 surfaces in the presence of surfactant ligands

Nanocrystals (NCs) with size and shape dependent properties are a thriving research field. Remarkable progress has been made in the controlled synthesis of NCs of stable elements in the past two decades; however, the knowledge of the NCs of actinide compounds has been considerably limited due the difficulties in handling them both experimentally and theoretically. Actinide compounds, especially actinide oxides, play a critical role in many stages of the nuclear fuel cycle. Recently, a non-aqueous surfactant assisted approach has been developed for the synthesis of actinide oxide NCs with different morphologies, but an understanding of its control factors is still missing to date. Herein we present a comprehensive study on the low index surfaces of thorium dioxide (ThO 2 ) and their interactions with relevant surfactant ligands using density functional calculations. A systematic picture on the thermodynamic stability of ThO 2 NCs of different sizes and shapes is obtained employing empirical models based on the calculated surface energies. It is found that bare ThO 2 NCs prefer the octahedral shape terminated by (111) surfaces. Oleic acid displays selective adsorption on the (110) surface, leading to the shape transformation from octahedrons to nanorods. Other ligands such as acetylacetone, oleylamine, and trioctylphosphine oxide do not modify the equilibrium shape of ThO 2 NCs. This work provides atomic level insights into the anisotropic growth of ThO 2 NCs that was recently observed in experiments, and thus may contribute to the controlled synthesis of actinide oxide NCs with well-defined size and shape for future applications.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Porous potassium tantalate-reduced graphene oxide nano cube architecture for high performance hybrid supercapacitors

Energy storage has always been a major concern in the present-day situation. Advanced energy storage devices are batteries, supercapacitor and solar cells. However, advancements have been noteworthy in the field of high-performance hybrid supercapacitors. On this note, we have fabricated a hybrid supercapacitor electrode material Potassium tantalate nano cube (KT NCs) and its reduced graphene oxide composite (KT-rGO NCs) and tested its electrochemical performance. The materials showed high performances with specific capacitance of 565 F/g for KT NCs and 850 F/g for KT-rGO NCs respectively. Energy densities of both KT NCs & KT-rGO NCs are 28.24 Wh/Kg and 29.50 Wh/kg with good retention capacities. Further detailed study of both KT NCs and KT-rGO NCs are carried out with characterization techniques like XRD, FTIR, BET, Raman and HRTEM for structural analysis and electrochemical measurements to analyse various parameters pertaining to its charge storage capacity.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Formation and coarsening of epitaxially-supported metal nanoclusters

This mini-review describes developments over the last ~30 years in characterizing the nucleation & growth of epitaxially-supported metal nanoclusters (NCs) or islands during vapor deposition, as well as their post-deposition coarsening. A beyond-mean-field treatment for homogeneous nucleation & growth corrects the deficiencies of traditional treatments in describing, e.g., the island size distribution, but also necessitates consideration of the spatial distribution of islands and their capture zones. We discuss advances in modeling capabilities, including those based upon on an ab-initio level treatment of periphery diffusion kinetics, for description of the non-equilibrium growth shapes of these NCs, focusing on 2D NCs. For post-deposition coarsening of arrays of NCs, there is generally a competition between Ostwald Ripening (OR) and Smoluchowski Ripening (SR). SR is also known as Particle Migration & Coalescence. For 2D NCs in homoepitaxial systems, conventional OR is observed on pristine fcc(111) surfaces, dramatically enhanced OR in the presence of even trace amounts of chalcogens for Cu(111) and Ag(111), and anomalous OR on anisotropic fcc(110) surfaces. The unexpected discovery of SR for fcc(100) homoepitaxial systems prompted extensive analysis of the underlying diffusivities of 2D NCs as a function of size, as well as of NC coalescence dynamics. A comprehensive understanding of these processes is now available. Self-assembly of 3D NCs during deposition, issues related to heterogeneous nucleation, directed assembly, NC growth structure selection, and coarsening are addressed. Finally, for SR of 3D epitaxial NCs, recent insights into the size-dependence of diffusivity are described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Bidentate Lewis Base Ligand-Mediated Surface Stabilization and Modulation of the Electronic Structure of CsPbBr 3 Perovskite Nanocrystals

The desorption of conventional ligands from the surface of halide perovskite nanocrystals (NCs) often causes their structural instability and the deterioration of the optoelectronic properties. To address this challenge, we present an approach of using a bidentate Lewis base ligand, namely, 1,4-bis(diphenylphosphino)butane (DBPP), for the synthesis of CsPbBr 3 NCs. The phosphine group of DBPP has a strong interaction with PbBr 2 precursor, forming a highly crystalline intermediate complex during the reaction. In the presence of oleic acid, the uncoordinated phosphine group of DBPP is converted into the phosphonium cation, which strongly binds with the surface bromide of the formed CsPbBr 3 NCs through hydrogen bonding. Density functional theory calculations suggest that DBPP can strongly bind to the undercoordinated lead and surface bromide ions of CsPbBr 3 NCs through its unprotonated and protonated phosphine groups, respectively. The robust binding of DBPP with the surface of perovskite NCs helps to preserve their structural integrity under various environmental stresses. Moreover, the electron density and energy levels are regulated in DBPP-capped CsPbBr 3 NCs via the efficient transfer of electrons from the ligands to the NCs, resulting in their improved photocatalytic CO 2 reduction performance. Furthermore, our study highlights the potential of using bidentate ligands to stabilize the surface of perovskite NCs and modulate their optical and electronic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗