Search NASA⌕ Search

SEARCH · Search NASA

Results for “NEUTRAL ELEMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Metal (Fe, Cu, and As) transformation and association within secondary minerals in neutralized acid mine drainage characterized using X-ray absorption spectroscopy

The formation and transformation of secondary minerals in areas affected by neutralized acid mine drainage (AMD) determine the behavior of toxic elements. To better understand the binding form of toxic elements in the secondary minerals, we focused on the distribution of secondary precipitates and heavy metals in neutralized AMD near a typical Cu-polymetallic deposit located in central Tibet. Compared to background values, the average heavy metal (As, Cu, Co, Cu, Mo, Pb, and Zn) content is higher in sediments close to the neutralized AMD drain. X-ray absorption spectroscopy (XAS) characterization shows the Fe in the suspended particulate matter (SPM) first aggregate as small Fe(III) octahedra clusters and then precipitate as ferrihydrite along the river. The XAS results also show the by-products of neutralization-ferrihydrite and sulfate-are the primary forms of Fe and S in the sediments, respectively. Gypsum retains Cu in the sediments via structural fixation, surface adsorption, and surface coprecipitation. The difference of Cu-O coordination number between the SPM and the sediments reveals the Cu sulfate coprecipitation on the surface of gypsum accompanied by SPM transporting along the river. XAS results confirm that ferrihydrite act as an essential sink for heavy metals, especially As. As (III) mineral in the sediment near the neutralized AMD outfall is dissolved and oxidized to arsenate downstream, which then adsorb to ferrihydrite and/or form As(V)-Fe minerals along the river. Gypsum and ferrihydrite have the potential to release heavy metals with changes in water chemistry, which may pose a threat to the safety of drinking water for downstream residents. These results deepen the understanding of the influence of secondary minerals (especially gypsum and ferrihydrite) on the migration and transformation process of heavy metal pollutants in mine drainage system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Measurement of spin-density matrix elements in ρ ( 770 ) production with a linearly polarized photon beam at E γ = 8.2 – 8.8 GeV

The GlueX experiment at Jefferson Lab studies photoproduction of mesons using linearly polarized 8.5GeV photons impinging on a hydrogen target which is contained within a detector with near-complete coverage for charged and neutral particles. We present measurements of spin-density matrix elements for the photoproduction of the vector meson rho(770). The statistical precision achieved exceeds that of previous experiments for polarized photoproduction in this energy range by orders of magnitude. Here we confirm a high degree of s-channel helicity conservation at small squared four-momentum transfer t and are able to extract the t-dependence of natural and unnatural-parity exchange contributions to the production process in detail. We confirm the dominance of natural-parity exchange over the full t range. We also find that helicity amplitudes in which the helicity of the incident photon and the photoproduced rho(770) differ by two units are negligible for -t<0.5GeV 2 /c 2 .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Dithionite Inhibits Iron(III) (Hydr)oxide Formation during Olivine Dissolution Advancing Simultaneous CO 2 Mineralization and Nickel Recovery

Increasing CO 2 concentration poses significant global challenges, impacting both environmental and human health. As we strive for a carbon-neutral energy technology transition, the demand for critical elements (e.g., nickel and cobalt) continues to increase, while high-grade ores are depleting. Combining CO 2 mineralization with the recovery of critical elements from low-grade ores offers an innovative solution. Olivine, a magnesium-rich ultramafic with trace amounts of critical elements, is a promising mineral; however, its impurities, such as iron (Fe(III)), hinder the dissolution of Ni and Mg from olivine, reducing its carbonation and critical element recovery. Here, to address this challenge, this study examined Ni dissolution from San Carlos olivine at high temperatures and high CO 2 pressure. We found that iron(III) (hydr)oxide layers impeded olivine dissolution; however, with sodium dithionite (Na 2 S 2 O 4 ), a reducing agent, olivine dissolution is significantly improved by preventing iron(III) (hydr)oxide formation. With Na 2 S 2 O 4 , within 24 h, Mg and Ni dissolution from olivine increased 2.85-fold and 2.66-fold, respectively, compared to samples without Na 2 S 2 O 4 . After seven cycles, with solutions replaced every 24 h, 98.9% of the total Mg and 84.6% of the total Ni were recovered. This approach enhances olivine’s CO 2 mineralization and improves the sustainability of critical element supply.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Spectrophotometric determination of the stability of La hydroxyl complexes at near neutral to alkaline pH from 25 to 75 °C

The hydrolysis of rare earth elements (REE) potentially controls their mobility during fluid-rock interaction in a broad range of pH and temperature conditions. However, there is still a lack of thermodynamic data for modeling accurately the stability of REE hydroxyl complexes in hydrothermal aqueous fluids. Here, in this study, UV–Vis spectrophotometric experiments were conducted from 25 to 75 °C in near-neutral to alkaline NaOH-bearing aqueous solutions with varying lanthanum (La) concentrations (0 to ∼0.23 mmol/kg). The color indicator m-cresol purple was used to determine in situ pH and derive the average OH− ligand number ($\overrightarrow{n}$) and formation constants for the La hydroxyl complexes (LaOH 2+ , La(OH) 2 + , and La(OH) 3 0 ). From 25 to 50 °C, $\overrightarrow{n}$ ranges between ∼1 and 2 at pH from 7.0 to 9.3. At 75 °C, $\overrightarrow{n}$ ranges between ∼1.5 and 3 at pH from 6.3 to 8.8. These results suggest the predominance of LaOH 2+ and La(OH) 2 + complexes from 25 to 50 °C, and an increased predominance of La(OH) 3 0 at 75 °C. The cumulative formation constants (β n °, n = 1 to 3) are derived for the reaction La 3+ + nOH − = La(OH) n 3-n , and fitted between 25 and 250 °C by combining the UV–Vis and literature solubility data. The resulting logβ n ° are expressed as function of temperature (T in Kelvin): logβ 1 ° = −1.786 + 0.0133 T + 1.049·10 3 /T; logβ 2 ° = −5.797 + 0.0267 T + 2.713·10 3 /T; logβ 3 ° = 6.435 + 0.0223 T + 512.7/T. A comparison between these new fits and existing extrapolations using the Helgeson-Kirkham-Flowers equation of state indicates significant differences in the predicted hydrolysis of La. The latter extrapolations should therefore be updated for the hydrolysis of REE.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Removal of High Specific Activity Fission Products from Uranyl Sulfate Waste Solutions

The Savannah River National Laboratory (SRNL) is currently providing support to SHINE Medical Technologies (SHINE) which plans to deploy a low energy, accelerator-based neutron source to fission low enriched U in a uranyl sulfate target solution for 99 Mo production. The 99 Mo is initially separated from the fission products and target solution by an extraction column. Subsequent washing of the column will generate waste solutions containing residual U and fission product activity. A small number of high specific activity fission products (e.g., 90 Sr, 137 Cs, and 144 Ce) in these streams will likely control the classification of the low level waste (LLW). If a sufficient amount of the high specific activity isotopes are separated from the SHINE waste streams and concentrated into a waste form, it would be possible to treat a majority of the wash solutions from the column operations as a lower class of LLW (Class A versus Class B or C or Class B versus Class C). The high specific activity fission product elements could then be dispositioned as a much smaller volume of waste rather than requiring the disposal of the entire waste stream at the higher waste classification. The Savannah River Site (SRS) has experience with using monosodium titanate (MST) and crystalline silicotitanate (CST) to remove Cs and Sr from high salt content waste solutions generated during the reprocessing of nuclear fuels and targets. Both of these materials have worked very well for their intended purposes at the SRS where the fission product elements are removed from highly alkaline waste. On the other hand, SHINE waste streams from the extraction column contain H 2 SO 4 which makes the solution acidic. Additionally, the SRS waste streams do not contain other fission product elements such as transition metals or lanthanides because they precipitate upon neutralization of the SRS waste and are not present in the supernate which is dispositioned as LLW following treatment. As such, there are inherent differences between SHINE and SRS waste treatment strategies. Savannah River National Laboratory was tasked with performing scoping studies to see if MST and CST would remove Sr, Cs, and Ce from an acidic mixed metal simulant solution. Batch contact experiments were performed using MST and two CST type materials. The MST material is a 15 wt % powder in 0.15 M NaOH slurry. The MST showed low adsorption for elements of interest from acidic solution. Furthermore, the powder size makes MST non-ideal for column operations. A CST IE-911 ion exchange material had high Cs adsorption, moderate Sr, and marginal Ce adsorption. Based on adsorption of all species, the ion exchange capacity was found to be 0.032 meq/mL. A bench-top column experiment to measure elemental breakthrough curves was performed using CST IE-911 where chromatographic separations of the mixed simulant were expected to occur. While most elements behaved as expected, the lanthanide series, containing Ce, broke though the column earlier than expected. The second CST material, CST R9120, displayed high adsorption for all elements in the acidic mixed simulant solutions in a batch contact study, and had a calculated loading capacity of 0.091 meq/mL. Future studies to develop a waste treatment flowsheet should focus on CST R9120 to treat SHINE waste solutions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Solid-phase isotope harvesting of 88 Zr from a radioactive ion beam facility

During routine operation of the Facility for Rare Isotope Beams (FRIB), radionuclides will accumulate in both the aqueous beam dump and along the beamline in the process of beam purification. These byproduct radionuclides, many of which are far from stability, can be collected and purified for use in other scientific applications in a process called isotope harvesting. In this work, the viability of 88 Zr harvesting from solid components was investigated at the National Superconducting Cyclotron Laboratory. A secondary 88 Zr beam was stopped in a series of collectors comprised of Al, Cu, W, and Au foils. Here, this work details irradiation of the collector foils and the subsequent radiochemical processing to isolate the deposited 88 Zr (and its daughter 88 Y) from them. Total average recovery from the Al, Cu, and Au collector foils was (91.3 ± 8.9) % for 88 Zr and (95.0 ± 5.8) % for 88 Y, respectively, which is over three times higher recovery than in a previous aqueous-phase harvesting experiment. The utility of solid-phase isotope harvesting to access elements such as Zr that readily hydrolyze in near-neutral pH aqueous conditions has been demonstrated for application to harvesting from solid components at FRIB.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Does inhomogeneous big bang nucleosynthesis produce an inhomogeneous element distribution today?

Inhomogeneous big bang nucleosynthesis (BBN) produces a spatially inhomogeneous distribution of element abundances at $T \sim 10^9$ K , but subsequent element diffusion will tend to erase these inhomogeneities. In this work, we calculate the cosmological comoving diffusion length for the BBN elements. This diffusion length is limited by atomic scattering and is therefore dominated by diffusion when the atoms are neutral, between the redshifts of recombination and reionization. We find that the comoving diffusion length today is $d_{\text{com}} ≈ 70$ pc for all of the elements of interest except 7 Li , for which $d_{\text{com}}$ is an order of magnitude smaller because 7 Li remains ionized throughout the relevant epoch. This comoving diffusion length corresponds to a substellar baryonic mass scale and is roughly equal to the horizon scale at BBN. These results lend support to the possibility that inhomogeneities on scales larger than the horizon at BBN could lead to a spatially inhomogeneous distribution of elements today, while purely subhorizon fluctuations at BBN can result only in a homogeneous element distribution at present.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Enhanced tuneable rotatory power in a rotating plasma

We report that the gyrotropic properties of a rotating magnetized plasma are derived analytically. Mechanical rotation leads to a new cutoff for wave propagation along the magnetic field, and polarization rotation above this cutoff is the sum of the classical magneto-optical Faraday effect and the mechanico-optical polarization drag. Exploiting the very large effective group index near the cutoff, we expose here that polarization drag can be 10 4 larger than Faraday rotation at GHz frequency. The rotation leads to weak absorption while allowing direct frequency control, demonstrating the unique potential of rotating plasmas for nonreciprocal elements. The very large rotation frequency of a dense non-neutral plasma could enable unprecedented gyrotropy in the THz regime.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Risk-Averse Control of Fractional Diffusion with Uncertain Exponent

In this paper, we introduce and analyze a new class of optimal control problems constrained by elliptic equations with uncertain fractional exponents. We utilize risk measures to formulate the resulting optimization problem. We develop a functional analytic framework, study the existence of solution and rigorously derive the first-order optimality conditions. Additionally, we employ a sample-based approximation for the uncertain exponent and the finite element method to discretize in space. Further, we prove the rate of convergence for the optimal risk neutral controls when using quadrature approximation for the uncertain exponent and conclude with illustrative examples.

finite element method↗
DOE OSTI2026

The Stability of Nd Hydroxyl Complexes at Near Neutral to Alkaline pH from 25 to 75 °C: Implications for Monazite Solubility in Hydrothermal Aqueous Fluids

Speciation of rare earth elements (REE) in aqueous fluids controls their mobilization during fluid-rock interaction. Thermodynamic modeling provides important insights into the factors controlling REE mobility and fractionation in aqueous fluids, in which aqueous REE hydroxyl complexes are particularly important across a broad pH range. However, the stability of these REE hydroxyl complexes remains poorly determined due to limited experimental data above ambient temperature. In this work, UV–vis spectrophotometry experiments were conducted to determine the cumulative hydrolysis constants for neodymium (Nd) from 25 to 75 °C in near-neutral to alkaline solutions. The color indicator m -cresol purple was used to determine in situ pH. Alkaline NaOH-bearing aqueous solutions were doped with varying initial Nd concentrations (0 to ∼0.155 mmol/kg), which resulted in the release of protons (H + ) and pH decrease during hydrolysis of Nd 3+ according to Nd 3+ + n H 2 O = Nd(OH) n 3– n + H + . The average OH – ligand number coordinated to Nd 3+ was found to increase from 1.0 to 1.6 at 25 °C and from 1.2 to 2.8 at 75 °C over a pH range from 6.3 to 9.0. The measured speciation shows an increased predominance of Nd(OH) 3 0 over the Nd(OH) 2 + and Nd(OH) 2+ species with increased temperature and pH. The increasing cumulative formation constants (log*β° n , n = 1 to 3) retrieved from 25 to 75 °C differ by 0.1 to 1.9 logarithmic units in comparison to existing thermodynamic databases. These updated thermodynamic data have important implications for geochemical modeling of the speciation of Nd hydroxyl complexes and the solubility of monazite as a function of pH.

58 GEOSCIENCES↗
DOE OSTI2022

Development of a Direct Neutral Density Diagnostic for Fusion Edge Plasmas

As magnetically confined plasmas progress towards ignition and long pulse experiments, measurement and control of the neutral density in the plasma edge has become a critical issue for stability, formation of transport barriers, and fueling. Recent experiments by our research group have demonstrated that is possible to use two-photon absorption laser induced fluorescence (TA-LIF) to directly measure the density of neutral hydrogen in helicon sources and in the HIT-SI3 spheromak. While those experiments validated key elements of a diagnostic system that would enable similar measurements in tokamak plasmas, they did not fully address the issue of performance optimization in the presence of intense background light at the fluorescence wavelength and they also identified a number of other issues that must be resolved before successful TALIF neutral density measurements in a tokamak are likely to be achieved. Additional specific concerns raised during design reviews with the leadership of the DIII-D tokamak facility included: the minimum detection threshold for this TALIF diagnostic (currently ~ 5 x 10 15 m -3 ) and the rate at which neutral density measurements could be obtained. Improving the system performance to reduce the minimum detection threshold and demonstrating a faster rate of density determination are required to advance this diagnostic to the level where it could be considered for implementation on a major tokamak facility in the USA. The key issues that will be addressed through additional technological development are: validation of a new, chromatic aberration-free, xenon calibration scheme; increasing the output power of the laser; and suppression of background emission at the fluorescence wavelength through optimization of the collection optics and gating of the photomultiplier detector with a goal of obtaining a minimum detection threshold of 5 x 10 14 m -3 . Another key technological development, so far only tested in helicon source experiments, is the validation of Doppler-free TALIF as a means of obtaining higher speed, calibrated, neutral density measurements in tokamak-like conditions at the full cadence of the pulsed TALIF laser. In this work, we propose to complete these technological advancements through installation and testing of our prototype TALIF system on the proto-MPEX experiment at Oak Ridge National Laboratory (ORNL). The proto-MPEX facility will provide plasma conditions similar to the edge plasma of a major tokamak experiment but with pulse lengths and pulse repetition rates ideally suited for extensive development of a TALIF neutral density diagnostic. Measurement of the absolute neutral density in the edge of a magnetically confined plasma is necessary for plasma density control; calculation of charge-exchange power losses; control of plasma-wall interactions; determination of the braking of plasma flow; determination of the fuel mixture in deuterium-tritium plasma; and understanding the dynamics of the divertor region in the plasma edge. In terms of potential impact on the worldwide fusion program, we note that in burning plasma experiments, such as ITER, a 100 mJ/pulse Doppler-free TALIF diagnostic should be capable of directly measuring the deuterium/tritium (D/T) isotope ratio in the outer 0.5 to 1.0 m of the plasma radius. The D/T ratio is a critically important parameter for the control and optimization of burning plasmas. Therefore, development of the diagnostic system proposed here is also relevant to long-term US participation in diagnostic development for large tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Process Scale-Up of an Energy-Efficient Membrane Solvent Extraction Process for Rare Earth Recycling from Electronic Wastes

This study reports the process scale-up and long-term performance of an energy-efficient and cost-effective membrane solvent extraction (MSX) process for separation and recovery of high purity rare earth oxides (REOs) from scrap permanent magnets (SPMs). Here, the rare earth elements (REEs), including dysprosium, neodymium, and praseodymium, are recovered from SPMs using a neutral extractant, tetraoctyl diglycolamide (TODGA) embedded in a microporous polypropylene hollow fiber membrane module. The MSX process performance is demonstrated with bench scale module with membrane surface area of 1.4 m 2 to industrial scale modules with membrane surface area of up to 20 m2 to enable the processing of up to 1 ton month –1 of SPMs. The purity and the yield of the recovered REOs are >99.5 wt% and >95%, respectively. The average extraction rate of REOs is >10 g m –2 hr –1 . A skid of MSX system is assembled with a membrane area of 40 m 2 . The MSX skid successfully recovers REOs with a capacity of 300 kg REOs/month. Finally, it is determined that the organic phase containing the extractant maintains its performance up to 250 h. The results suggest that the MSX process is an economically viable and environmentally friendly process for separation and recovery of REOs from electronic wastes.

36 MATERIALS SCIENCE↗
DOE OSTI2026

FLAG review 2024

We review lattice results related to pion, kaon, 𝐷-meson, 𝐵-meson, and nucleon physics with the aim of making them easily accessible to the nuclear and particle physics communities. More specifically, we report on the determination of the light-quark masses, the form factor 𝑓+⁡(0) arising in the semileptonic 𝐾 → 𝜋 transition at zero momentum transfer, as well as the decay-constant ratio 𝑓 𝐾 ⁡/𝑓 𝜋 and its consequences for the Cabibbo–Kobayashi–Maskawa (CKM) matrix elements 𝑉 𝑢⁢𝑠 and 𝑉 𝑢⁢𝑑 . We review the determination of the 𝐵 𝐾 parameter of neutral kaon mixing as well as the additional four 𝐵 parameters that arise in theories of physics beyond the Standard Model. For the heavy-quark sector, we provide results for 𝑚 𝑐 and 𝑚 𝑏 as well as those for the decay constants, form factors, and mixing parameters of charmed and bottom mesons and baryons. These are the heavy-quark quantities most relevant for the determination of CKM matrix elements and the global CKM unitarity-triangle fit. We review the status of lattice determinations of the strong coupling constant 𝛼 𝑠 . We review the determinations of nucleon charges from the matrix elements of both isovector and flavor-diagonal axial, scalar and tensor local quark bilinears, and momentum fraction, helicity moment and the transversity moment from one-link quark bilinears. We also review determinations of scale-setting quantities. Finally, in this review we have added a new section on the general definition of the low-energy limit of the Standard Model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

At-source Recovery of Rare Earth Elements from Coal Mine Drainage

Conventional acid mine drainage (AMD) treatment consists of pH adjustment, oxidation, and separation of solid precipitates from discharge quality water. Alkaline addition increases the pH to the range 7 to 9 to precipitate the regulated metals Al and Mn ions as hydroxides. Mechanical or chemical oxidation then converts the reduced iron species Fe 2+ to Fe 3+ which precipitates at a low pH value as ferric hydroxide (Fe(OH) 3 ). Co-precipitation of Rare Earth Elements (REEs) with hydroxides creates a gangue-rich matrix from which REEs must be separated. Fe(OH)3 is generally the most abundant gangue-forming metal. Current research by the project team has shown raw, untreated AMD has an average total rare earth element content (TREE) of about 287 μg/L (0.287 ppm). Operators of AMD-producing facilities are obliged to treat it to neutralize acidity and remove regulated metals (e.g., iron (Fe), aluminum (Al), and manganese (Mn)) prior to discharge. Ongoing research indicates conventional AMD treatment concentrates TREE in resulting precipitates (AMD sludge) by an average factor of 2,635x to an average dry weight, elemental concentration of 708 g/t (ppm). While the economics of recovering REEs from AMD sludge are appealing, much of the cost of REE recovery would be incurred during separation of REEs from the gangue metals: Fe, Al, and Mn. Significant gains can be made by precipitating REEs when most of these gangue metals are still in solution. Significant improvements in REE extraction efficiency can be obtained through separation of REEs from the aqueous phase AMD, upstream of conventional AMD treatment by: 1) creating an enriched REE feedstock, 2) producing a more consistent feedstock, 3) reducing transportation costs to an REE refinery, 4) reducing acid consumption in the acid leaching step, and 5) reducing the volume of waste produced at the ALSX plant. This project is exploring two novel approaches for extracting REEs upstream of the conventional AMD treatment plants to create a purified REE feedstock while leaving the bulk of the Fe, Al, and Mn in solution for subsequent treatment. While the average TREE concentration of raw AMD is low and individual sites range between 10 and 2,200 μg/L, successful at-source REE separation will generate a superior feedstock to a conventional ALSX process and significantly improve the economics and environmental performance of REE extraction from AMD. AMD can be classified into two types: type A is net acid and iron is partly oxidized while type B is net alkaline, and iron occurs in the reduced, ferrous state. In Case A, the pH is raised slightly, which will precipitate Fe 3+ and Al 3+ but not REEs. The other important type of AMD is net alkaline water found in flooded, anoxic deep mines. These generally have a pH > 6.0 and are net alkaline. REE concentrations are also much lower than those found in acidic AMD while the volumes and flux are much higher. Most of these are pumped discharges with almost no Al. Case B AMD is strongly reduced and, like Case A water, Fe and Mn ions are similarly reduced and therefore soluble at pH <9.0. REEs and an array of transition ions will be the only trivalent cations in this type of AMD. In Case B, both upward pH adjustment under reducing conditions and application of an electrochemically stimulated supported liquid membrane strategy to separate REEs from ferrous ion will be explored.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2022

The Third Dimension of Ferroelectric Domain Walls

Abstract Ferroelectric domain walls are quasi‐2D systems that show great promise for the development of nonvolatile memory, memristor technology, and electronic components with ultrasmall feature size. Electric fields, for example, can change the domain wall orientation relative to the spontaneous polarization and switch between resistive and conductive states, controlling the electrical current. Being embedded in a 3D material, however, the domain walls are not perfectly flat and can form networks, which leads to complex physical structures. In this work, the importance of the nanoscale structure for the emergent transport properties is demonstrated, studying electronic conduction in the 3D network of neutral and charged domain walls in ErMnO 3 . By combining tomographic microscopy techniques and finite element modeling, the contribution of domain walls within the bulk is clarified and the significance of curvature effects for the local conduction is shown down to the nanoscale. The findings provide insights into the propagation of electrical currents in domain wall networks, reveal additional degrees of freedom for their control, and provide quantitative guidelines for the design of domain‐wall‐based technology.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Transition Metals Separation with Commercial Neutral Extractants – A Review

The increasing use of extraction chromatography resins across fields such as hydrometallurgy, nuclear medicine, and environmental analysis has created a need for a deeper understanding of their interactions with transition metals. Despite extensive research on f-element separations, the behavior of transition metals in these systems remains relatively understudied. This review provides a comprehensive overview of the current state of knowledge on the extraction behavior of transition metals with neutral extractants, including TODGA, TEHDGA, TBP, and CMPO, and their corresponding resins, such as DGA, BDGA, UTEVA, TBP, and TRU. The review summarizes extraction data, extracted complex coordination environments, separation reaction stoichiometries, and associated thermodynamics, highlighting inconsistencies and knowledge gaps in the literature. The study emphasizes the need for further research using spectroscopy and computational methods to elucidate extraction mechanisms and to improve the efficiency and selectivity of transition metal separations. By identifying areas for future research and development, this review aims to stimulate advancements in the field and promote the development of innovative separation technologies. The implications of this research are far-reaching, with potential applications in nuclear waste management, nuclear forensics, metal recovery, and environmental remediation. Overall, this review provides a foundation for future studies on the extraction of transition metals using neutral extractants and resins.

Wall, Nathalie A.↗
DOE OSTI2026

Averages of 𝑏-hadron, 𝑐-hadron, and 𝜏-lepton properties as of 2023

This paper reports world averages of measurements of 𝑏-hadron, 𝑐-hadron, and 𝜏-lepton properties obtained by the Heavy Flavor Averaging Group using results available before October 2023. In rare cases, significant results obtained several months later are also used. For the averaging, common input parameters used in the various analyses are adjusted (rescaled) to common values, and known correlations are taken into account. The averages include branching fractions, lifetimes, neutral meson mixing parameters, 𝐶⁢𝑃 violation parameters, parameters of semileptonic decays, and Cabibbo-Kobayashi-Maskawa matrix elements.

Bottom quark production↗
DOE OSTI2024

Efficient electrosynthesis of hydrogen peroxide in neutral media using boron and nitrogen doped carbon catalysts

The two-electron electrocatalytic oxygen reduction reaction (2e - ORR) is a promising, sustainable, and efficient route for on-site and small-scale production of hydrogen peroxide (H 2 O 2 ) compared to the conventional anthraquinone oxidation process. Although heteroatom doped carbon materials are widely studied for the 2e - ORR, few studies have been conducted on the synergistic relationship between multiple doping elements on H 2 O 2 performance. Moreover, there is a lack of efficient and stable catalysts for H 2 O 2 electrosynthesis in neutral media. In this work, a series of boron and nitrogen co-doped carbon (BNC) catalysts are synthesized and assessed for the 2e - ORR in neutral pH electrolyte. Through X-ray photoelectron and absorption spectroscopy analyses, we characterize B–N–C moieties and correlate them with H 2 O 2 production performance. In rotating ring disk electrode measurements, BNC catalysts pyrolyzed at 900 °C exhibit H 2 O 2 Faradaic efficiency of ~70% and demonstrate excellent long-term stability over 10 hours of continuous operation. In a three-electrode flow cell, this catalyst achieves ~78% H 2 O 2 Faradaic efficiency and 0.9 mmol cm -2 h -1 productivity at 0.20 V vs. RHE, surpassing most previously reported carbon-based catalysts in neutral media. This work contributes fundamental insights into the role of boron and nitrogen heteroatom dopants toward 2e - ORR and highlights the practical viability of these catalysts for real world applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗