Search NASA⌕ Search

SEARCH · Search NASA

Results for “NTF”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

28 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Influence of solvents on electrochemical stability window of ionic liquid solutions

The electrochemical stability window (ESW) defines the voltage range within which an electrolyte remains stable against oxidation and reduction, serving as a key descriptor for ionic liquid (IL)-based systems. The ESWs of 15 ILs with diverse cation-anion combinations were systematically investigated, both in their neat forms and as binary mixtures with three representative solvents, i.e., propylene carbonate (PC), ethylene glycol (EG), and tetrahydrofuran (THF). Cyclic voltammetry on a glassy carbon electrode determined anodic and cathodic stability limits, revealing that ESW protection in IL-solvent mixtures strongly depends on solvent polarity, proticity, and IL compatibility. PC, with a high dielectric constant and aprotic character, broadened anodic limits and moderately stabilized cathodic limits. THF maintained compact interfacial structure, offering additional cathodic protection, whereas EG, being protic, reduced ESWs via proton-coupled electron transfer and hydrogen evolution. The solvent protection trend followed by PC > THF > EG, with bulky, hydrophobic cations ([HMIM] + , [BMPYRR] + ) and weakly coordinating anions ([NTF 2 ] - , [DCA] - , [DEP] - ) showing the highest ESW protection for 50 mol% IL in these solvents. Among the neat ILs, [EMIM][DEP], [HMIM][PF 6 ], and [BMPYRR][DCA] showed wide ESWs of ∼5.5 V. These results provide valuable insight into solvent-modulated electrochemical stability, enabling rational design of IL-based electrolytes for energy storage and electrosynthesis.

25 ENERGY STORAGE↗
DOE OSTI2025

Unraveling the solvation phenomena of Ln 3+ cations in room-temperature ionic liquids: A computational study

Rare-earth elements (REEs), classified as critical materials, are difficult to separate due to their similar chemical properties and slight differences in ionic radius. Room-temperature ionic liquids (RTILs) have gained significant attention for REE separation because of their unique physicochemical properties and environmental advantages. In this study, we have investigated the solvation mechanisms of two RE cations (Ln 3+ ), Nd 3+ (light REE) and Yb 3+ (heavy REE), in two 1-butyl-3-methylimidazolium ([BMIM] + )-based RTILs using bis(trifluoromethylsulfonyl)imide ([NTf 2 ] − ) and acetate ([OAc] − ) as the respective anions, employing classical molecular dynamics (MD) simulations and density functional theory (DFT) techniques. From MD simulations, it is evident that Ln 3+ cations are primarily solvated by RTIL anions in the first solvation shell, while [BMIM] + cations form the second solvation shell with their numbers depending on the size and composition of the first solvation shell. The neutralizing [NO 3 − ] counterions are mainly solvated by [BMIM] + cations in their first solvation shell. Relative free energy change of solvation calculations using thermodynamic integration (TI) method indicate that Yb 3+ is more strongly solvated than Nd 3+ in both RTILs, a trend further supported by DFT calculations. While both methods predict consistent qualitative behavior, differences in models and energy evaluations lead to variations in absolute values. Overall, this study provides a comprehensive understanding of the solvation behavior of Ln 3+ cations in RTILs, demonstrating a stronger solvation preference for the heavy Ln 3+ cation (Yb 3+ ). In conclusion, these findings have implications for the design of RTIL-based separation processes for REEs.

Ash, Tamalika [Ames Lab., and Iowa State Univ., Am↗
DOE OSTI2026

Ionic Liquid-Enhanced Interfaces to Boost Reactive C O2 Capture

The addition of ionic liquids (ILs) to a mixture containing a molecular solvent and other ionic species can induce the heterogeneous redistribution of cations and anions at the gas–liquid interface. This nonuniform redistribution of cations and anions driven by the differences in the solvophilicity of ions can improve the thermophysical and interfacial properties of such mixtures, creating a local chemical environment that is conducive to some reactions. In this work, ILs are added to a mixture of potassium hydroxide (KOH) and ethylene glycol (EG), used as a reactive absorbent and electrolyte in the migration-assisted moisture-gradient (MAMG) process for CO 2 capture. Molecular dynamics (MD) simulations are employed to probe into the effects of complex ion–ion and ion–solvent interactions and to examine the chemical composition at the gas–liquid interface. A total of 12 systems are investigated using molecular simulations to identify trends in the performance of IL additives based on the choice of cation, anion, and IL concentration. The cation effects are studied using IL additives based on 1-ethyl-3-methylimidazolium ([EMIM] + ) and 1-butyl-3-methylimidazolium ([BMIM] + ), while the impact of anions is examined using additives based on dicyanamide [DCA] − , triflate [TfO] − , bistriflimide [NTf 2 ] − , and hexafluorophosphate [PF 6 ] − anions, respectively. The influence of the IL concentration is also evaluated at molar concentrations between 1% and 4%. The simulation results indicate that the use of IL additives can affect the physical CO 2 solubility, surface tension, and the localization of CO 2 around the [OH] − ions at the gas–liquid interface. It is also evident that the choice of cations, anions, and IL concentration determines the extent to which the IL additives impact the local physicochemical properties. Physical dissolution, diffusive transport, and interaction with [OH] − are critical intermediate steps toward reactive CO 2 capture using a liquid absorbent. Hence, the improvement in one or more of these properties, aided by IL additives, is expected to improve the overall CO 2 capture performance. Experiments reaffirmed the impact of IL additives on CO 2 capture performance and the sensitivity to the choice of the cation, anion, and concentration of the IL additive.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Toward Lithium Recovery Using Modular (and Membraneless) Phase Separation and Extraction (MPSE) Technology with Ionic Liquid (IL) Solvents: Effect of Coatings

In this work, a single-channel slope-plate Modular and Membrane-less Phase Separation and Extraction (MPSE) device was fabricated using 3D printing. The slope-plate was designed with an insertable glass slide to enable surface modification with coatings. Self-assembled monolayers (SAMs) and perfluoropolyether (Zdol) coatings were applied to tailor surface wettability and enhance phase separation. Using a model biphasic system of water and hexadecane, both coatings significantly improved the separation efficiency compared to the uncoated device by promoting selective wetting. Building on these results, lithium extraction from a simulated saline solution was investigated using 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][NTf₂]) as the ionic liquid (IL) extractant. The IL effectively extracted Li⁺ from the aqueous phase in bulk extraction, demonstrating its potential for lithium recovery. However, the low interfacial tension between the IL and aqueous phases posed challenges for phase separation. The application of SAM and Zdol coatings effectively mitigated this issue. Overall, integrating tailored surface chemistry with the slope-plate MPSE design shows great promise as an efficient and scalable platform for studying liquid–liquid separation and optimizing ionic liquid–based extraction processes for lithium recovery from saline sources.

3D printing↗
DOE OSTI2021

A Dicopper Nitrenoid by Oxidation of a Cu'Cu' Core: Synthesis, Electronic Structure, and Reactivity

A dicopper nitrenoid complex was prepared by formal oxidative addition of the nitrenoid fragment to a dicopper(I) center by reaction with the iminoiodinane PhINTs (Ts = tosylate). This nitrenoid complex, (DPFN)Cu 2 (μ-NTs)[NTf 2 ] 2 (DPFN = 2,7-bis(fluorodi(2-pyridyl)methyl)-1,8-naphthyridine), is a powerful H atom abstractor that reacts with a range of strong C–H bonds to form a mixed-valence Cu(I)/Cu(II) μ-NHTs amido complex in the first example of a clean H atom transfer to a dicopper nitrenoid core. In line with this reactivity, DFT calculations reveal that the nitrenoid is best described as an iminyl (NR radical anion) complex. The nitrenoid was trapped by the addition of water to form a mixed-donor hydroxo/amido dicopper(II) complex, which was independently obtained by reaction of a Cu 2 (μ-OH) 2 complex with an amine through a protonolysis pathway. Furthermore, this mixed-donor complex is an analogue for the proposed intermediate in copper-catalyzed Chan–Evans–Lam coupling, which proceeds via C–X (X = N or O) bond formation. Treatment of the dicopper(II) mixed donor complex with MgPh 2 (THF) 2 resulted in generation of a mixture that includes both phenol and a previously reported dicopper(I) bridging phenyl complex, illustrating that both reduction of dicopper(II) to dicopper(I) and concomitant C–X bond formation are feasible.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Valence states of cyclotron-produced thallium

The unexpected behavior of thallium atoms, produced in a reaction of gold target with accelerated 3 He ions, in liquid–liquid extraction with [C n mim][NTf 2 ] ionic liquids ( n = 2, 4, 6–8, 10) was investigated. Contrary to the general expectations, a significant proportion of thallium produced in the nuclear reaction was found in a non-monovalent state upon dissolution of the KCl aerosol collector. This finding is critical for the design and evaluation of the forthcoming chemistry experiments with the superheavy element nihonium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Dynamics of fluorinated imide-based ionic liquids using nuclear magnetic resonance techniques

There is increasing interest in studying molecular motions in ionic liquids to gain better insights into their transport properties and to expand their applications. Here, in this study, we have employed the fast field cycling relaxometry and pulsed field gradient nuclear magnetic resonance techniques to investigate the rotational and translational dynamics of fluorinated imide-based ionic liquids (ILs) at different temperatures. We have studied a total of six ILs composed of the 1-butyl-3-methylimidazolium cation ([BMIM] + ) combined with chemically modified analogs of the bis((trifluoromethyl)sulfonyl)imide anion ([NTf 2 ] − or [TFSI] − ). The primary objective of this paper is to broaden the understanding of how the anion's conformational flexibility, fluorination, and mass affect the molecular dynamics of cations and anions. Our results indicate that flexibility has the most significant impact on the rotational and translational motions of ions. Meanwhile, the effect of fluorination and mass is only relevant when conformational flexibility does not change significantly between the ILs being compared.

25 ENERGY STORAGE↗
DOE OSTI2020

Mixtures of octanol and an ionic liquid: Structure and transport

Ionic liquids (ILs) with long alkyl substituents are amphiphilic, which leads to a bicontinuous liquid structure. The strongly interacting anionic and cationic head groups form a long range charge network, with the hydrocarbon tails forming a nonpolar domain. Such nonpolar domains have been shown to dissolve a variety of neutral organic solvents. In mixtures of ILs with solvents the neutral organic molecules residing in the nonpolar domains experience different environments and friction from the charged cations and anions. Thus, the neutral molecules diffuse much faster than predicted by hydrodynamic scaling using the average viscosity of the mixture. Here, we report studies on the structure and transport properties of mixtures of 1-octanol with the IL trihexyltetradecylphosphonium bis(trifluoromethylsulfonyl)imide (P 6,6,6,14 + /NTf 2 – ). The majority of the atom fraction in the P 6,6,6,14 + cation comprises four hydrocarbon substituents. The unique amphiphilic nature of ILs with the P 6,6,6,14 + cation makes 1-octanol fully miscible with the IL at ambient temperatures. X-ray scattering experiments show that the IL structure persists in the mixtures for 1-octanol mole fractions as large as x oct = 0.90. The self-diffusion coefficients of the three molecular species in the mixtures were measured by NMR experiments. The self-diffusion of the P 6,6,6,14 + cation is well described by the Stokes–Einstein equation, while the diffusivity of the NTf 2 – anion is slightly lower than the hydrodynamic prediction. The measured diffusivities of octanol in these mixtures are 1.3–4 times higher than the hydrodynamic predictions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗