Search NASA⌕ Search

SEARCH · Search NASA

Results for “Near Zero Scattering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Near-infrared observations of the proto-planetary nebula AFGL 618

Near-IR images and spectroscopy of the bipolar protoplanetary nebula AFGL 618 are presented. Emission from molecular hydrogen is detected in the 0.90-1.34-micron spectrum. A visual extinction of 3.4 +4.0/-2.0 mag to the H2-emitting region is derived from molecular hydrogen line ratios. Models of collisionally excited and fluorescent H2 emission are compared with the data: the near-IR H2 spectrum is found to be dominated by emission from collisionally excited molecules at Tex of about 2000 K, but a component of fluorescent emission is also present. It is shown that this type of near-IR spectrum is an excellent tool for discriminating relatively low levels of fluorescent H2 emission from a strong collisionally excited component. Images in the H- and K-bandpasses are analyzed using models which assume single scattering of photons from the central objects. The models indicate that the bipolar axis is inclined to the plane of the sky by about 45 deg. The emission in the H- and K-bands is found to be consistent with single scattering of photons by dust with a distribution such that the dust density increases with increasing stellar latitude and is nearly zero at the poles.

Latter, William B.↗

Sunlight absorption by aerosols in Jupiter's upper atmosphere

The amount of sunlight deposited in the Jovian upper atmosphere is estimated from reflectivity measurements at 2400 A by the Voyager 2 Photopolarimeter experiment and at visible and near-IR wavelengths observed by Pioneer 10 and ground-based instruments. Zero to about one percent of the incident energy is absorbed at altitudes above the 100 mbar level in models with mean values for haze optical depth and single scattering albedo. Several percent of the incident energy could be absorbed, if limiting values are used, and if an additional absorbing layer is incorporated below the high altitude haze in Pioneer models. Maximum absorption occurs at the edge of the polar regions near + or - 65 deg latitude. Most of the absorbed energy is derived from visible and near-IR radiation rather than UV radiation.

West, R. A.↗

Water-ice Clouds on Mars: Location and Seasonal Variation

Water-ice clouds were located on Mars using Viking infrared thermal mapper (IRTM) broadband spectral observations. The IRTM instrument had 5 thermal bands centered at 7, 9, 11, 15, and 20 microns. Clouds and hazes were consistently observed in four northern hemisphere regions centered over Tharsis, Arabia, Elysium, and along the boundary between the crater uplands and the northern plains. During the northern spring and summer when the atmosphere is relatively free of dust, there is a distinct difference between the cloud abundance in the Northern and Southern Hemispheres, with clouds and hazes being rare in the south. A second important class of water-ice clouds are those observed along the boundary of the retreating north polar cap. These clouds occur at all longitudes around the cap and are generally confined to within +/- 5 deg of the cap boundary. The cloud opacities can be estimated using a delta-Eddington radiative transfer model which incorporates Mie scattering and the electrical properties of water-ice. Assuming realistic, but non-unique, values for the ice particle size and cloud temperature, the derived opacities range from near-zero to 1.

Christensen, P. R.↗

Monitoring Delamination of Thermal Barrier Coatings by Near-Infrared and Upconversion Luminescence Imaging

Previous work has demonstrated that TBC delamination can be monitored by incorporating a thin luminescent sublayer that produces greatly increased luminescence intensity from delaminated regions of the TBC. Initial efforts utilized visible-wavelength luminescence from either europium or erbium doped sublayers. This approach exhibited good sensitivity to delamination of electron-beam physical-vapor-deposited (EB-PVD) TBCs, but limited sensitivity to delamination of the more highly scattering plasma-sprayed TBCs due to stronger optical scattering and to interference by luminescence from rare-earth impurities. These difficulties have now been overcome by new strategies employing near-infrared (NIR) and upconversion luminescence imaging. NIR luminescence at 1550 nm was produced in an erbium plus ytterbium co-doped yttria-stabilized zirconia (YSZ) luminescent sublayer using 980-nm excitation. Compared to visible-wavelength luminescence, these NIR emission and excitation wavelengths are much more weakly scattered by the TBC and therefore show much improved depth-probing capabilities. In addition, two-photon upconversion luminescence excitation at 980 nm wavelength produces luminescence emission at 562 nm with near-zero fluorescence background and exceptional contrast for delamination indication. The ability to detect TBC delamination produced by Rockwell indentation and by furnace cycling is demonstrated for both EB-PVD and plasma-sprayed TBCs. The relative strengths of the NIR and upconversion luminescence methods for monitoring TBC delamination are discussed.

Eldridge, J. I.↗

Determination of Stress Intensity Factor Distributions for "Interface" Cracks in Incompressible, Dissimilar Materials

The present study was undertaken in order to develop test methods and procedures for measuring the variation of the stress intensity factor through the thickness in bimaterial specimens containing cracks within and parallel to the bond line using the frozen stress photoelastic method. Since stress freezing materials are incompressible above critical temperature, and since thick plates are to be employed which tend to produce a state of plane strain near the crack tip, the interface near tip fracture equations reduce to the classic form for homogeneous materials. Moreover, zero thickness interfaces do not exist when materials are bonded together. It was decided early on that it would be important to insure a uniform straight and accurate crack tip region through the thickness of the body to reduce scatter in the SIF distribution through the thickness. It was also observed that rubberlike materials which were desired to be modeled exhibited significant tip blunting prior to crack extension and that some blunting of the tip would provide a more realistic model. It should be noted that, in normal stress freezing photoelastic work, it is considered good practice to avoid utilizing data near bond lines in photoelastic models due to the bond line stresses which inevitably develop when two parts are bonded together. Thus, the present study involves certain exploratory aspects in deviating from standard practice in stress freezing work. With the above ideas in mind, several different test methods were investigated and are described in the following sections and appendices. The geometry selected for the program was a thick, edge cracked specimen containing a bond line.

Smith, C. W.↗

A uniform geometrical optics and an extended uniform geometrical theory of diffraction for evaluating high frequency EM fields near smooth caustics and composite shadow boundaries

A uniform geometrical optics (UGO) and an extended uniform geometrical theory of diffraction (EUTD) are developed for evaluating high frequency electromagnetic (EM) fields within transition regions associated with a two and three dimensional smooth caustic of reflected rays and a composite shadow boundary formed by the caustic termination or the confluence of the caustic with the reflection shadow boundary (RSB). The UGO is a uniform version of the classic geometrical optics (GO). It retains the simple ray optical expressions of classic GO and employs a new set of uniform reflection coefficients. The UGO also includes a uniform version of the complex GO ray field that exists on the dark side of the smooth caustic. The EUTD is an extension of the classic uniform geometrical theory of diffraction (UTD) and accounts for the non-ray optical behavior of the UGO reflected field near caustics by using a two-variable transition function in the expressions for the edge diffraction coefficients. It also uniformly recovers the classic UTD behavior of the edge diffracted field outside the composite shadow boundary transition region. The approach employed for constructing the UGO/EUTD solution is based on a spatial domain physical optics (PO) radiation integral representation for the fields which is then reduced using uniform asymptotic procedures. The UGO/EUTD analysis is also employed to investigate the far-zone RCS problem of plane wave scattering from two and three dimensional polynomial defined surfaces, and uniform reflection, zero-curvature, and edge diffraction coefficients are derived. Numerical results for the scattering and diffraction from cubic and fourth order polynomial strips are also shown and the UGO/EUTD solution is validated by comparison to an independent moment method (MM) solution. The UGO/EUTD solution is also compared with the classic GO/UTD solution. The failure of the classic techniques near caustics and composite shadow boundaries is clearly demonstrated and it is shown that the UGO/EUTD results remain valid and uniformly reduce to the classic results away from the transition regions. Mathematical details on the asymptotic properties and efficient numerical evaluation of the canonical functions involved in the UGO/EUTD expressions are also provided.

Constantinides, E. D.↗

On obtaining the forward phase functions of Saturn ring features from radio occultation observations

It is noted that the near-forward scattering functions of particles in Saturn ring features are related to 3.6 cm radio occultation power spectra by a Fredholm integral equation of the first kind. The equation reduces to an algebraic system of equation whose solution by usual inversion techniques (that is, least mean squares) is ruled out by the near singularity of the forward transformation matrix. A combination of constrained linear inversion and a filtering algorithm based on eigenvector decomposition of the matrix reduces the instabilities; this yields derived phase functions valid over the range of zero to about 12 mrad. It is noted that these functions represent the collective forward diffraction lobe of particles greater than about 1 m in radius. Since multiple scattering of the signal is a significant effect, the measured phase functions must be adjusted to obtain the singly scattered component. This single-scattering correction is examined for two physical models, namely the monolayer and the classical discrete random slab; in addition, the fraction of opacity in submeter particles for each model for particular ring features is estimated.

Zebker, H. A.↗

L band radar backscatter dependence upon surface wind stress - A summary of new Seasat-1 and aircraft observations

The wind-scale relationships for L band radar wavelengths near 25 cm and 20 deg angle of incidence and HH polarization are reviewed using a number of aircraft and Seasat-1 SAR observations. The dependence of the L band backscatter coefficient from the ocean upon surface wind speed and direction is stated. The wind speed coefficient is 0.5 + or - 0.1 for a wide range of wind speeds. The wind direction coefficient is near zero for lower winds and stable marine boundary layers, but may be 0.20 + or - 0.05 for moderate wind speeds and an unstable marine boundary layer. These results are interpreted in terms of existing theoretical models for radar scattering from the ocean.

Thompson, T. W.↗

Ion streaming instabilities with application to collisionless shock wave structure

The electromagnetic dispersion relation for two counterstreaming ion beams of arbitrary relative strength flowing parallel to a dc magnetic field is derived. The beams flow through a stationary electron background and the dispersion relation in the fluid approximation is unaffected by the electron thermal pressure. The dispersion relation is solved with a zero net current condition applied and the regions of instability in the k-U space (U is the relative velocity between the two ion beams) are presented. The parameters are then chosen to be applicable for parallel shocks. It was found that unstable waves with zero group velocity in the shock frame can exist near the leading edge of the shock for upstream Alfven Mach numbers greater than 5.5. It is suggested that this mechanism could generate sufficient turbulence within the shock layer to scatter the incoming ions and create the required dissipation for intermediate strength shocks.

Golden, K. I.↗

Performance of the Zeeman analyzer system of the McDonald Observatory 2.7 meter telescope

The paper describes a multichannel photoelectric Zeeman analyzer at the coude spectrograph of the McDonald 2.7 m reflector. A comparison of Lick and McDonald observations of HD 153882 reveals no significant difference in slopes or zero points of the two magnetic fields indicating that the systematic scale difference of 30-40% is probably instrumental in origin. Observations of the magnetic variable beta Cor Bor revealed a more nearly sinusoidal magnetic curve with less internal scatter than the photographically determined field measures of the Lick and Mauna Kea Zeeman systems. Investigation of periodicity in the secularly varying magnetic minima of beta Cor Bor did not yield evidence of previously noted periodicities other than that expected from the time structure of the data sampling.

Vogt, S. S.↗

Cloud properties inferred from 8-12 micron data

A trispectral combination of observations at 8-, 11-, and 12-micron bands is suggested for detecting cloud and cloud properties in the infrared. Atmospheric ice and water vapor absorption peak in opposite halves of the window region so that positive 8-minus-11-micron brightness temperature differences indicate cloud, while near-zero or negative differences indicate clear regions. The absorption coefficient for water increases more between 11 and 12 microns than between 8 and 11 microns, while for ice, the reverse is true. Cloud phases is determined by a scatter diagram of 8-minus-11-micron versus 11-minus-12-micron brightness temperature differences; ice cloud shows a slope greater than 1 and water cloud less than 1. The trispectral brightness temperature method was tested upon high-resolution interferometer data resulting in clear-cloud and cloud-phase delineation. Simulations using differing 8-micron bandwidths revealed no significant degradation of cloud property detection. Thus, the 8-micron bandwidth for future satellites can be selected based on the requirements of other applications, such as surface characterization studies. Application of the technique to current polar-orbiting High-Resolution Infrared Sounder (HIRS)-Advanced Very High Resolution Radiometer (AVHRR) datasets is constrained by the nonuniformity of the cloud scenes sensed within the large HIRS field of view. Analysis of MAS (MODIS Airborne Simulator) high-spatial resolution (500 m) data with all three 8-, 11-, and 12-micron bands revealed sharp delineation of differing cloud and background scenes, from which a simple automated threshold technique was developed. Cloud phase, clear-sky, and qualitative differences in cloud emissivity and cloud height were identified on a case study segment from 24 November 1991, consistent with the scene. More rigorous techniques would allow further cloud parameter clarification. The opportunities for global cloud delineation with the Moderate-Resolution Imaging Spectrometer (MODIS) appear excellent. The spectral selection, the spatial resolution, and the global coverage are all well suited for significant advances.

Strabala, Kathleen I.↗

Properties of the Hermean Regolith: New Optical Reflectance Spectra, Comparison with Lunar Anorthosites and Mineralogical Modelling - 5

We present new optical (0.4-0.65 micron) spectra of Mercury and lunar pure anorthosite locations, obtained quasi-simultaneously with the Nordic Optical Telescope (NOT) in 2002. A comparative study is performed with the model of Lucey et al. between iron-poor, mature, pure anorthosite (less than 90% plagioclase feldspar) Clementine spectra from the lunar farside and a combined 0.4-1.0 micron mercurian spectrum, obtained with the NOT, calculated for standard photometric geometry. Mercury is located at more extreme locations in the Lucey ratio-reflectance diagrams than any known lunar soil, specifically with respect to the extremely iron-poor mature anorthosites. Though quantitative prediction of FeO and TiO2 abundances cannot be made without a more generally applicable model, we find qualitatively that the abundances of both these oxides must be near zero for Mercury. We utilize the theory of Hapke, with realistic photometric parameters, to model laboratory spectra of matured mineral powders and lunar soils, and remotely sensed spectra of lunar anorthosites and Mercury. An important difference between fabricated and natural powders is the high value for the internal scattering parameter necessary to interpret the spectra for the former, and the requirement of rough and non-isotropically scattering surfaces in the modelling of the latter. The mature lunar anorthosite spectra were well modelled with binary mixtures of calcic feldspars and olivines, grain sizes of 25-30 micron and a concentration of submicroscopic metallic iron (SMFe) of 0.12-0.15% in grain coatings. The mercurian spectrum is not possible to interpret from terrestrial mineral powder spectra without introducing an average particle scattering function for the bulk soil that increases in backscattering efficiency with wavelength. The observed spectrum is somewhat better predicted with binary mixture models of feldspars and pyroxenes, that single-component regoliths consisting of either albite or diopside. Correct spectral reflectance values were predicted with a concentration of 0.1 wt% SMFe in coatings of 15-30 micron sized grains. Since reasonable cosmogonical formation scenarios for Mercury, or meteoritic infall, predict iron concentrations at least this high, we draw the conclusion that the average grain size of Mercury is about a factor of two smaller than for average returned lunar soil samples. The 0.6-2.5 micron spectrum of McCord and Clark is used to further limit the possible range of mineralogical composition of Mercury. It is found that an intimately mixed and matured 3 : 1 labradorite-to-enstatite regolith composition best matches both the optical and near-infrared spectra, yielding an abundance of approx. 1.2 wt% FeO and -approx. 0 wt% TiO2.

Warell, J.↗

A UGO/EUTD Solution for the Scattering and Diffraction from Cubic Polynomial Strips

A uniform geometrical optics (UGO) and an extended uniform geometrical theory of diffraction (EUTD) solution is developed for the scattering and diffraction from perfectly conducting cubic polynomial strips. The new solution overcomes the difficulties of the classic GO/UTD solution near caustics and composite shadow boundaries. The approach for constructing the UGO/EUTD solution is based on a spatial domain physical optics (PO) radiation integral representation for the scattered field which is then reduced using a uniform asymptotic procedure. New uniform reflection, zero-curvature diffraction, and edge diffraction coefficients are derived and involve the ordinary and incomplete Airy integrals as canonical functions. Higher order effects such as double edge diffraction, edge-excited creeping waves, and whispering gallery modes are not examined in this work. The UGO/EUTD solution is very efficient and provides useful physical insight into the various scattering and diffraction processes. It is also universal in nature and can be used to effectively describe the scattered fields from flat, strictly concave or convex, and concave-convex boundaries containing edges. Its accuracy is confirmed via comparison with some reference moment method (MM) results.

Constantinides, Evagoras D.↗

Flight transition data for angles of attack at Mach 22 with correlations of the data

Boundary-layer transition data for angles of attack from 2.5 to 47 deg from a flight experiment with a cone that reentered at angles of attack up to 75 deg were analyzed and their local flow conditions are presented. The transition data were obtained from both acoustic and electrostatic sensors. The data from the acoustic and electrostatic sensors were correlated by use of three different sets of correlating parameters. For each set of correlating parameters, the transitional and turbulent data from the acoustic and electrostatic sensors were plotted separately. Each of the correlations was compared with a linear curve fit of previous cone-flight data at near zero angle of attack. Results indicate that the data from acoustic sensors falls below the linear curve fits to the flight data and indicates the sensitivity of the sensors. It is shown that the transition data from the electrostatic sensors tends to scatter much more than the data from the acoustic sensors. However, the data from the electrostatic sensors tends to scatter about the linear curve fits based on previous flight data.

Johnson, C. B.↗

Solar modulation of galactic cosmic rays. 3: Implications of the Compton-Getting coefficient

Spectra of modulated galactic cosmic rays are expressed in terms of the Compton-Getting coefficient C. This parameter can reveal the energy range over which the force field approximation is valid, and the range where convection effects dominate those of diffusion. A value of C near zero over an extended low energy range implies that the radial gradient at low energies can not be large. This small gradient may imply that the diffusion coefficient increases beyond 1 AU less rapidly than proportionally to heliocentric radial distance, and/or there is essentially no scattering for a sizeable distance from the Sun to earth. The behavior of C with rigidity (or energy) is discussed in terms of the omnidirectional distribution function f sub zero. Contours of constant f sub zero in the heliocentric distance vs rigidity plane are useful for illustrating the mean rigidity loss experienced by cosmic rays in the interplanetary medium.

Fisk, L. A.↗

Effective Albedo of Vegetated Terrain at L-Band

This paper derives an explicit expression for an effective albedo of vegetated terrain from the zero- and multiple- order radiative transfer (RT) model comparison. The formulation establishes a direct physical link between the effective vegetation parameterization and the theoretical description of absorption and scattering within the canopy. The paper will present an evaluation of the derived albedo for corn canopies with data taken during an experiment at Alabama A&M Winfield A. Thomas Agricultural Research Station near Huntsville, Alabama in June, 1998. The test site consisted of two 50-m x 60-m plots - one with a bare surface and the other with grass cover - and four 30-m x 50-m plots of corn at different planting densities. One corn field was planted at a full density of 9.5 plants/sq m while the others were planted at 1/3, 1/2 and 2/3 of the full density. The fields were observed with a truck-mounted L-band radiometer at incident angle of 15 degree for the period of two weeks. Soil moisture (SM) changed daily due to irrigation and natural rainfall. Variations in gravimetric SM from 18 % to 34 % were seen during this period. Ground truth data, including careful characterization of the corn size and orientation statistics, and its dielectric, was also collected and used to simulate the effective albedo for the vegetation. The single-scattering albedo is defined as the fractional power scattered from individual vegetation constituents with respect to canopy extinction. It represents single-scattering properties of vegetation elements only, and is independent of ground properties. The values of the albedo get higher when there is dense vegetation (i.e. forest, mature corn, etc.) with scatterers, such as branches and trunks (or stalks in the case of corn), which are large with respect to the wavelength. This large albedo leads to a reduction in brightness temperature in the zero-order RT solution (known as tau-omega model). Higher-order multiple-scattering RT solutions are required for proper representation of scattering within vegetation. In this paper, an expression for an effective albedo for the whole canopy including the ground is derived for use in the zero-order RT model-based SM retrieval. This effective albedo takes into account of all the processes taking place within the canopy, including multiple-scattering. This new formulation will be presented and its importance for microwave SM retrieval will be evaluated for corn canopies in conjunction with the detailed ground truth data obtained during the experiment at Alabama in 1998. Emphasis will be placed on examining how the radiometer response to SM is modified by the corn canopy scattering under different field conditions. A semi-empirical parameterization of the effective albedo will be investigated through analysis of SM and vegetation water content effects on the effective albedo.

Kurum, Mehmet↗

Urban land use classification using synthetic aperture radar

Several approaches to the use of radar imagery for land use classification of urban and near-urban areas are presented. The use of L band, horizontal transmit, and horizontal receive data is emphasized because of their general availability. For urban area studies using imaging radar, the effects of processing in an off-zero Doppler or squint mode, of the presence of large diffuse scatters, and of the possibility of height measurements are discussed. Data from the Los Angeles area are illustratively used.

Bryan, M. L.↗

Water-Leaving Contribution to Polarized Radiation Field Over Ocean

The top-of-atmosphere (TOA) radiation field from a coupled atmosphere-ocean system (CAOS) includes contributions from the atmosphere, surface, and water body. Atmo-spheric correction of ocean color imagery is to retrieve water-leaving radiance from the TOA measurement, from which ocean bio-optical properties can be obtained. Knowledge of the ab-solute and relative magnitudes of water-leaving signal in the TOA radiation field is important for designing new atmospheric correction algorithms and developing retrieval algorithms for new ocean biogeochemical parameters. In this paper we present a systematic sensitivity study of water-leaving contribution to the TOA radiation field, from 340 nm to 865 nm, with polarization included. Ocean water inherent optical properties are derived from bio-optical models for two kinds of waters, one dominated by phytoplankton (PDW) and the other by non-algae particles (NDW). In addition to elastic scattering, Raman scattering and fluorescence from dissolved organic matter in ocean waters are included. Our sensitivity study shows that the polarized reflectance is minimized for both CAOS and ocean signals in the backscattering half plane, which leads to numerical instability when calculating water leaving relative contribution, the ratio between polarized water leaving and CAOS signals. If the backscattering plane is excluded, the water-leaving polarized signal contributes less than 9% to the TOA polarized reflectance for PDW in the whole spectra. For NDW, the polarized water leaving contribution can be as much as 20% in the wavelength range from 470 to 670 nm. For wavelengths shorter than 452 nm or longer than 865 nm, the water leaving contribution to the TOA polarized reflectance is in general smaller than 5% for NDW. For the TOA total reflectance, the water-leaving contribution has maximum values ranging from 7% to 16% at variable wavelengths from 400 nm to 550 nm from PDW. The water leaving contribution to the TOA total reflectance can be as large as 35%for NDW, which is in general peaked at 550 nm. Both the total and polarized reflectances from water-leaving contributions approach zero in the ultraviolet and near infrared bands. These facts can be used as constraints or guidelines when estimating the water leaving contribution to the TOA reflectance for new atmospheric correction algorithms for ocean color imagery.

inelastic scatterin↗