Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nitrogen rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Cyclic variations in nitrogen uptake rate of soybean plants: effects of external nitrate concentration

Net uptake of NO3- by non-nodulated soybean plants [Glycine max (L.) Merr. cv. Ransom] growing in flowing hydroponic cultures containing 0.5, 1.0 and 10.0 mol m-3 NO3- was measured daily during a 24-d period of vegetative development to determine if amplitude of maximum and minimum rates of net NO3- uptake are responsive to external concentrations of NO3-. Removal of NO3- from the replenished solutions during each 24-h period was determined by ion chromatography. Neither dry matter accumulation nor the periodicity of oscillations in net uptake rate was altered by the external NO3- concentrations. The maxima of the oscillations in net uptake rate, however, increased nearly 3-fold in response to external NO3- concentrations. The maxima and minima, respectively, changed from 4.0 and 0.6 mmol NO3- per gram root dry weight per day at an external solution level of 0.5 mol m-3 NO3- to 15.2 and -2.7 mmol NO3- per gram root dry weight per day at an external solution level of 10.0 mol m-3 NO3-. The negative values for minimum net uptake rate from 10.0 mol m-3 NO3- solutions show that net efflux was occurring and indicate that the magnitude of the efflux component of net uptake was responsive to external concentration of NO3-.

Non-NASA Center↗
DOE OSTI2020

Irrigation, carbon amelioration, nitrogen, and stover removal effects on continuous corn

Corn (Zea mays L.) residue or stover is harvested as supplemental feed for livestock and is a potential feedstock for cellulosic biofuels. Limited information is available on corn stover removal effects on grain yield under different irrigation rates, nitrogen (N) fertilizer rates, and practices to maintain soil carbon (C) and minimize soil erosion. Here, we evaluated potential interactions between irrigation rate (full or limited), C amelioration practices (cover crop, surface-applied manure, or no amelioration practice), fertilizer N management (125 or 200 kg N ha –1 ), and stover removal (residue removal or no residue removal), on no-till continuous corn grain yield located on a silt loam soil in south-central Nebraska (2011–2018). Stover removal increased (P = .0017) grain yield by 1.02 Mg ha –1 and grain N uptake compared with no stover removal. Manure increased corn grain yield by 899 kg ha –1 compared to either the control or cover crop with stover removal while C amelioration practices did not affect grain yield under stover retention. Grain N concentration was higher (P < .0001) with stover removal (13.2 g kg –1 ) than residue retained (12.7 g kg –1 ). Partial factor productivity (grain yield/N rate) was highest for manure treatments with residue removal. The farmgate N balance (N applied – N removed) from stover removal was negative, yet grain yield was not affected after eight growing seasons. Grain yield increased with stover removal and manure application resulting in a cost-effective C amelioration practice whereas incorporating a winter cover crop resulted in similar grain yield as the control.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Engineering quantum-coherent defects: The role of substrate miscut in chemical vapor deposition diamond growth

The engineering of defects in diamond, particularly nitrogen-vacancy (NV) centers, is important for many applications in quantum science. A materials science approach based on chemical vapor deposition (CVD) growth of diamond and in situ nitrogen doping is a promising path toward tuning and optimizing the desired properties of the embedded defects. Herein, with the coherence of the embedded defects in mind, we explore the effects of substrate miscut on the diamond growth rate, nitrogen density, and hillock defect density, and we report an optimal angle range for the purposes of engineering coherent ensembles of NV centers in diamond according to our growth parameters. We provide a model that quantitatively describes hillock nucleation in the step-flow regime of CVD growth, shedding insight on the physics of hillock formation. We also report significantly enhanced incorporation of nitrogen at hillock defects, opening the possibility for templating hillock-defect-localized NV center ensembles for quantum applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS2012

Space Suit Portable Life Support System Test Bed (PLSS 1.0) Development and Testing

A multi-year effort has been carried out at NASA-JSC to develop an advanced extra-vehicular activity Portable Life Support System (PLSS) design intended to further the current state of the art by increasing operational flexibility, reducing consumables, and increasing robustness. Previous efforts have focused on modeling and analyzing the advanced PLSS architecture, as well as developing key enabling technologies. Like the current International Space Station Extra-vehicular Mobility Unit PLSS, the advanced PLSS comprises three subsystems required to sustain the crew during extra-vehicular activity including the Thermal, Ventilation, and Oxygen Subsystems. This multi-year effort has culminated in the construction and operation of PLSS 1.0, a test bed that simulates full functionality of the advanced PLSS design. PLSS 1.0 integrates commercial off the shelf hardware with prototype technology development components, including the primary and secondary oxygen regulators, Ventilation Subsystem fan, Rapid Cycle Amine swingbed carbon dioxide and water vapor removal device, and Spacesuit Water Membrane Evaporator heat rejection device. The overall PLSS 1.0 test objective was to demonstrate the capability of the Advanced PLSS to provide key life support functions including suit pressure regulation, carbon dioxide and water vapor removal, thermal control and contingency purge operations. Supplying oxygen was not one of the specific life support functions because the PLSS 1.0 test was not oxygen rated. Nitrogen was used for the working gas. Additional test objectives were to confirm PLSS technology development components performance within an integrated test bed, identify unexpected system level interactions, and map the PLSS 1.0 performance with respect to key variables such as crewmember metabolic rate and suit pressure. Successful PLSS 1.0 testing completed 168 test points over 44 days of testing and produced a large database of test results that characterize system level and component performance. With the exception of several minor anomalies, the PLSS 1.0 test rig performed as expected; furthermore, many system responses trended in accordance with pre-test predictions.

Watts, Carly↗
DOE OSTI2024

Optimizing bioenergy sorghum productivity and nutrient removal in Illinois: Impact of nitrogen fertilization under diverse marginal conditions

Bioenergy sorghum (Sorghum bicolor L. Moench) is a promising crop for contributing to the United States bioenergy supply. However, the varying limitations of the marginal lands targeted for its cultivation present a management challenge. This two-year study aimed to investigate how the limitations associated with marginal cropland impact the effects of nitrogen fertilization on the yield of bioenergy sorghum and the uptake of 11 macro- (N, P, K, Ca, Mg, and S) and micronutrients (Fe, Mn, Zn, Cu, and B). The study contrasted prime cropland in central Illinois (Urbana) with three marginal cropland sites in southern (Ewing) and central Illinois (Fairbury and Pesotum). These marginal cropland sites are characterized by varying limitations, including low soil fertility (P and K limitations), leaching and erosion, and flooding, respectively. Four nitrogen rates (0, 56, 112, and 168 kg N ha –1 ) were tested under eight environments. The average yields and ranges of sorghum biomass were 20.2 (17.0–23.2) Mg ha –1 in Urbana, 18.1 (13.1–19.8) Mg ha –1 in Ewing, 13.8 (9.0–17.3) Mg ha –1 in Fairbury, and 23.3 (14.6–33.0) Mg ha –1 in Pesotum. Optimal N rates were 56 N in Pesotum and 112 N in Urbana, Ewing, and Fairbury. Tissue macronutrient contents in Urbana were generally higher than in the marginal croplands, while micronutrient contents did not show discernible trends. Increasing N rate generally correlated with the macronutrient removal except in Ewing. Comparable sorghum biomass yields were observed between prime and marginal croplands (averaging 18.3 Mg ha –1 ), but optimal N rates varied between 56 N and 112 N. This suggests that yield gaps can be narrowed by applying the optimal N rates for the respective locations. However, increased removals of macronutrients, especially P and K, with increasing yields indicate the need to revise fertilizer recommendations, particularly for soils deficient in these nutrients.

09 BIOMASS FUELS↗
DOE OSTI2024

Data for Optimizing Bioenergy Sorghum Productivity and Nutrient Removal in Illinois: Impact of Nitrogen Fertilization Under Diverse Marginal Conditions

Bioenergy sorghum ( Sorghum bicolor L. Moench) is a promising crop for contributing to the United States bioenergy supply. However, the varying limitations of the marginal lands targeted for its cultivation present a management challenge. This two-year study aimed to investigate how the limitations associated with marginal cropland impact the effects of nitrogen fertilization on the yield of bioenergy sorghum and the uptake of 11 macro- (N, P, K, Ca, Mg, and S) and micronutrients (Fe, Mn, Zn, Cu, and B). The study contrasted prime cropland in central Illinois (Urbana) with three marginal cropland sites in southern (Ewing) and central Illinois (Fairbury and Pesotum). These marginal cropland sites are characterized by varying limitations, including low soil fertility (P and K limitations), leaching and erosion, and flooding, respectively. Four nitrogen rates (0, 56, 112, and 168 kg N ha−1) were tested under eight environments. The average yields and ranges of sorghum biomass were 20.2 (17.0–23.2) Mg ha−1 in Urbana, 18.1 (13.1–19.8) Mg ha−1 in Ewing, 13.8 (9.0–17.3) Mg ha−1 in Fairbury, and 23.3 (14.6–33.0) Mg ha−1 in Pesotum. Optimal N rates were 56 N in Pesotum and 112 N in Urbana, Ewing, and Fairbury. Tissue macronutrient contents in Urbana were generally higher than in the marginal croplands, while micronutrient contents did not show discernible trends. Increasing N rate generally correlated with the macronutrient removal except in Ewing. Comparable sorghum biomass yields were observed between prime and marginal croplands (averaging 18.3 Mg ha−1), but optimal N rates varied between 56 N and 112 N. This suggests that yield gaps can be narrowed by applying the optimal N rates for the respective locations. However, increased removals of macronutrients, especially P and K, with increasing yields indicate the need to revise fertilizer recommendations, particularly for soils deficient in these nutrients. Our study suggests that while sorghum production on marginal cropland is feasible, N management needs to be adapted to the unique limitations associated with various types of marginal cropland.

Biomass Analytics↗
NASA NTRS2002

The Effects of Low Sulfate Concentrations on Modern Microbial Mat Communities: A Long Term Manipulation

Microbial mats were widespread during the first ca. 2 Ga. of our biosphere's history. To better understand microbial ecosystems and their biomarkers under the low sulfate levels present in early oceans, we attempted a long-term (ca. 1 year) manipulation of sulfate in modem mats. Mats collected from salt ponds at Guerrero Negro, Baja Calif. Sur were incubated in a Greenhouse "Collaboratory" at Ames. Mats were maintained in artificial seawater brine containing either: 1) sulfate levels normal for these mats (70 mM), or 2) brine in which sulfate was replaced by chloride. Sulfate concentrations in the "low sulfate" brine gradually approached their lowest (to date) value of 0. 1 mM as sulfate was consumed and/or diffused out of the mat over a period of ca. 4 months. During that period of time, a number of differences between the treatments emerged. Relative to the "low sulfate" mats, "normal sulfate" mats had: 1) lower consumption of oxygen in the lower levels of the mat, 2) higher efficiencies of oxygenic photosynthesis, and 3) higher rates of nitrogen fixation. Rates of methane production by the mats increased greatly as sulfate concentrations fell below ca. 0.2 mM. In contrast, "low" and "normal" sulfate mats had similar net rates of exchange of O2 and dissolved inorganic C between the mats and overlying water. Reduced sulfate levels have diverse impacts upon these ecosystems.

Bebout, Brad↗
NASA NTRS2001

Nutrient Stress Detection in Corn Using Neural Networks and AVIRIS Hyperspectral Imagery

AVIRIS image cube data has been processed for the detection of nutrient stress in corn by both known, ratio-type algorithms and by trained neural networks. The USDA Shelton, NE, ARS Variable Rate Nitrogen Application (VRAT) experimental farm was the site used in the study. Upon application of ANOVA and Dunnett multiple comparsion tests on the outcome of both the neural network processing and the ratio-type algorithm results, it was found that the neural network methodology provides a better overall capability to separate nutrient stressed crops from in-field controls.

Estep, Lee↗
NASA NTRS1982

Direct measurements of ozone and nitrogen dioxide photolysis rates in the troposphere

The photolysis frequencies of ozone and nitrogen dioxide were measured under a variety of conditions commonly found in the troposphere. Ozone photolysis frequencies show a strong dependence on solar zenith angle, overhead ozone column, and temperature, but only a weak dependence on altitude (when only downward radiation is detected). Nitrogen dioxide photolysis frequencies also show strong dependence on solar zenith angle, but show little dependence on temperature, pressure, or altitude. Both j values are strongly affected by cloud cover, but aerosol loading has much less effect. The disagreement of measured j(O3) and j(NO2) with many modeled values, especially disagreement over altitude dependence, shows that atmospheric UV radioactive processes are complicated and poorly understood, although experimental conditions may not always be applicable to conditions modeled.

Dickerson, R. R.↗
NASA NTRS1975

Maximum two-phase flow rates of subcooled nitrogen through a sharp-edged orifice

Data are presented of an experiment in which subcooled liquid nitrogen was discharged through a sharp-edged orifice at flow rates near the maximum. The data covered a range of inlet stagnation pressures from slightly above saturation to twice the thermodynamic critical pressure. The data were taken along five separate inlet stagnation isotherms ranging from 0.75 to 1.035 times the thermodynamic critical temperature. The results indicate that subcooled liquids do not choke or approach maximum flow in an asymptotic manner even though the back pressure is well below saturation; and orifice flow coefficients are not constant as is frequently assumed. A metastable jet appears to exist which breaks down if the difference between back pressure and saturation pressure is large enough.

Simoneau, R. J.↗
NASA NTRS1975

Maximum two-phase flow rates of subcooled nitrogen through a sharp-edged orifice

An experiment was conducted and data are presented in which subcooled liquid nitrogen was discharged through a sharp-edged orifice at flow rates near the maximum. The data covered a range of inlet stagnation pressure from slightly above saturation to twice the thermodynamic critical pressure. The data were taken along five separate inlet stagnation isotherms ranging from 0.75 to 1.035 times the thermodynamic critical temperature. The results indicate that: (1) subcooled liquids do not choke or approach maximum flow in an asymptotic manner even though the back pressure is well below saturation; (2) orifice flow coefficients are not constant as is frequently assumed. A metastable jet appears to exist which breaks down if the difference between back pressure and saturation pressure is large enough.

Simoneau, R. J.↗
DOE OSTI2022

Modeling the effect of nitrogen recycling on the erosion and leakage of tungsten impurities from the SAS-VW divertor in DIII-D during nitrogen gas injection

The new SAS-VW divertor in DIII-D has tungsten-coated components to enable the study of tungsten erosion and leakage from a closed, slot-like divertor. A proposed method of actively managing the tungsten impurities is to inject low-Z impurities, such as nitrogen, into the Scrape-off-Layer (SOL) to modify the conditions in the plasma boundary and in turn manipulate both the erosion and subsequent transport of tungsten. Nitrogen injection from the SOL crown has been modeled using SOLPS-ITER to calculate the background plasma including the intrinsic carbon and the injected nitrogen impurities, and subsequently DIVIMP has been used to calculate the tungsten erosion and transport on top of the background plasma solution. This workflow has been used to model scenarios at a variety of nitrogen injection rates with different assumptions about the nitrogen recycling at the target. In the scenario modeled here, an optimal nitrogen injection rate around 3-4 x 10 20 N/s is found to reduce the amount of tungsten reaching the core by a factor of about 2.4. However, when the nitrogen recycling rate at the divertor targets is high, the nitrogen redistributes within the slot leading to increased tungsten sputtering, and the range of injection rates resulting in tungsten mitigation becomes narrower.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗