Search NASA⌕ Search

SEARCH · Search NASA

Results for “Non-destructive”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

A review of the state-of-the-art of the non-destructive testing of flight pressure vessels

The design of flight vessels is based on a nominal stress requirement and a fracture mechanics approach, and optimization of the weight of the vessel is based on the smallest size defect that can be detected with a high degree of confidence. The wide variety of metals used for fabrication, and the different defects that may be present in them at every stage, up to completion of the vessel, is described. Techniques currently being used for NDT are described along with their advantages, limitations and limits of detectability at high levels of confidence. Techniques considered for use in the future to improve the limits of the minimum flaw size that can currently be detected include the Delta Scan and Acoustic Emission techniques. The construction of space vessels for use in the future has been modified to reduce the presence of critical defects and so to improve the cost effectiveness of projected NDT requirements.

Noronha, P. J.↗
NASA NTRS1978

Non-destructive ultrasonic measurements of case depth

Two ultrasonic methods for nondestructive measurements of the depth of a case-hardened layer in steel are described. One method involves analysis of ultrasonic waves diffused back from the bulk of the workpiece. The other method involves finding the speed of propagation of ultrasonic waves launched on the surface of the work. Procedures followed in the two methods for measuring case depth are described.

Flambard, C.↗
NASA NTRS1979

Further development of ultrasonic techniques for non-destructive evaluation based on Fourier analysis of signals from irregular and inhomogeneous structures

To investigate the use of Fourier analysis techniques model systems had to be designed to test some of the general properties of the interaction of sound with an inhomogeneity. The first models investigated were suspensions of solid spheres in water. These systems allowed comparison between theoretical computation of the frequency dependence of the attenuation coefficient and measurement of the attenuation coefficient over a range of frequencies. Ultrasonic scattering processes in both suspensions of hard spheres in water, and suspensions of hard spheres in polyester resin were investigated. The second model system was constructed to test the applicability of partial wave analysis to the description of an inhomogeneity in a solid, and to test the range of material properties over which the measurement systems were valid.

Miller, J. G.↗
NASA NTRS1972

Metallic positive expulsion diaphragms

High-cycle life ring-reinforced hemispherical type positive expulsion diaphragm performance was demonstrated by room temperature fluid expulsion tests of 13" diameter, 8 mil thick stainless steel configurations. A maximum of eleven (11) leak-free, fluid expulsions were achieved by a 25 deg cone angle diaphragm hoop-reinforced with .110-inch cross-sectional diameter wires. This represents a 70% improvement in diaphragm reversal cycle life compared to results previously obtained. The reversal tests confirmed analytic predictions for diaphragm cycle life increases due to increasing values of diaphragm cone angle, radius to thickness ratio and material strain to necking capacity. Practical fabrication techniques were demonstrated for forming close-tolerance, thin corrugated shells and for obtaining closely controlled reinforcing ring stiffness required to maximize diaphragm cycle life. A non-destructive inspection technique for monitoring large local shell bending strains was developed.

Gleich, D.↗
NASA NTRS1974

Dissimilar metals joint evaluation

Dissimilar metals tubular joints between 2219-T851 aluminum alloy and 304L stainless steel were fabricated and tested to evaluate bonding processes. Joints were fabricated by four processes: (1) inertia (friction) weldings, where the metals are spun and forced together to create the weld; (2) explosive welding, where the metals are impacted together at high velocity; (3) co-extrusion, where the metals are extruded in contact at high temperature to promote diffusion; and (4) swaging, where residual stresses in the metals after a stretching operation maintain forced contact in mutual shear areas. Fifteen joints of each type were prepared and evaluated in a 6.35 cm (2.50 in.) O.D. size, with 0.32 cm (0.13 in.) wall thickness, and 7.6 cm (3.0 in) total length. The joints were tested to evaluate their ability to withstand pressure cycle, thermal cycle, galvanic corrosion and burst tests. Leakage tests and other non-destructive test techniques were used to evaluate the behavior of the joints, and the microstructure of the bond areas was analyzed.

Wakefield, M. E.↗
NASA NTRS1973

Reliability after inspection

Flaws are occasionally overlooked during non-destructive inspections, and consequently the products are not 100 percent reliable. The quantitative relationships among the probability of having manufacturing defects, the probability of detecting a flaw, and final reliability are established. Several specific situations are considered: where a flaw might be present; where a random number of flaws are randomly scattered throughout the piece; where some parts of the product are not accessible for inspection; and a general case where various portions are more easily inspected than others, more or less likely to contain flaws than others, or are not inspectable while other portions are.

Davidson, J. R.↗
NASA NTRS1975

Lightning effects on the NASA F-8 digital-fly-by-wire airplane

The effects of lightning on a Digital Fly-By-Wire (DFBW)aircraft control system were investigated. The aircraft was a NASA operated F-8 fitted with a modified Apollo guidance computer. Current pulses similar in waveshape to natural lightning, but lower in amplitude, were injected into the aircraft. Measurements were made of the voltages induced on the DFBW circuits, the total current induced on the bundles of wires, the magnetic field intensity inside the aircraft, and the current density on the skin of the aircraft. Voltage measurements were made in both the line-to-ground and line-to-line modes. Voltages measured at the non-destructive test level were then scaled upward to determine how much would be produced by actual lightning. A 200,000 ampere severe lightning flash would produce between 40 and 2000 volts in DFBW circuits. Some system components are expected to be vulnerable to these voltages.

Plumer, J. A.↗
NASA NTRS1975

Evaluation of dispersion strengthened nickel-base alloy heat shields for space shuttle application

The design, fabrication, and testing of a full-size, full-scale TD Ni-20Cr heat shield test array in simulated mission environments is described along with the design and fabrication of two additional full-size, full-scale test arrays to be tested in flowing gas test facilities at the NASA Langley Research Center. Cost and reusability evaluations of TD Ni-20Cr heat shield systems are presented, and weight estimates of a TD Ni-20Cr heat shield system for use on a shuttle orbiter vehicle are made. Safe-line expectancy of a TD Ni-20Cr heat shield system is assessed. Non-destructive test techniques are evaluated to determine their effectiveness in quality assurance checks of TD Ni-20Cr components such as heat shields, heat shield supports, close-out panels, formed cover strips, and edge seals. Results of tests on a braze reinforced full-scale, subsize panel are included. Results show only minor structural degradation in the main TD Ni-20Cr heat shields of the test array during simulated mission test cycles.

Johnson, R., Jr.↗
NASA NTRS1976

Contamination control in hybrid microelectronic modules

Thin and thick film test specimens were utilized to study the effects of silicone and epoxy hybrid microcircuit coatings on 0.025 mm diameter aluminum and gold ultrasonic bonds, and 0.051 diameter gold pulsed-thermocompression bonds. Chip-to-substrate and substrate-to-substrate geometries were included. Because sealed packages were utilized, a test pattern design was incorporated that allowed the determination of bond failures by making resistance measurements external to the package after the various environmental tests. All wire bonds were non-destructively pull tested prior to sealing. Tests included the PIN test, temperature cycling, and high temperature storage.

Himmel, R. P.↗
NASA NTRS1977

Probabilistic fracture mechanics and optimum fracture control of the solid rocket motor case of the shuttle

Development of a procedure for the reliability analysis of the solid rocket motor case of the space shuttle is described. The analysis is based on probabilistic fracture mechanics and consideration of a probability distribution for the initial flaw sizes. The reliability analysis can be used to select design variables, such as the thickness of the SRM case, projected design life and proof factor, on the basis of minimum expected cost and specified reliability bounds. Effects of fracture control plans such as the non-destructive inspections and the material erosion between missions can also be considered in the developed methodology for selection of design variables. The reliability-based procedure can be easily modified to consider other similar structures and different fracture control plans.

Hanagud, S.↗
NASA NTRS1977

Evaluating of NASA-Langley Research Center explosion seam welding

An explosion bonding technique to meet current fabrication requirements was demonstrated. A test program was conducted on explosion bonded joints, compared to fusion joints in 6061-T6 aluminum. The comparison was made in required fixtures, non-destructive testing, static strength and fatigue strength.

Otto, H. E.↗
NASA NTRS1979

Ion-beam analysis of meteoritic and lunar samples

Charged particle-induced nuclear reactions were used in the following problems: the determination of elemental abundances of boron and fluorine in carbonaceous chondritic meteorites; the identification of products of lunar vulcanism; and the study of solar wind-implanted atoms in lunar materials. The technique was seen as an important supplement to other methods of elemental and isotopic analysis. This was especially true for cases involving light elements at very low concentrations or where high resolution depth distribution information was needed in non-destructive analysis.

Tombrello, T. A.↗
NASA NTRS1980

Spectral assessment of soybean leaf area and leaf biomass

Red and photographic infrared spectral radiance have been correlated with soybean total leaf area index, green leaf area index, chlorotic area index, green leaf biomass, chlorotic leaf biomass, and total biomass. The most significant correlations were found to exist between the spectral data and green leaf area index and/or green leaf biomass. These findings demonstrate that ground based remote sensing data can supply information basic to soybean canopy growth, development, and status by non-destructive determination of the green leaf area or green leaf biomass.

Holben, B. N.↗
NASA NTRS1982

Moisture in Composites is Measured by Positron Lifetime

New technique is expected to measure the moisture content and moisture depth distribution in fiber-reinforced polymeric composites. Technique is based on dependence of positron lifetime on moisture content of composite specimen. None of the previous non-destructive testing techniques measured moisture content and depth distribution simultaneously.

Singh, J. J.↗
NASA NTRS1981

Analogue implementation of analytic signal processing for pulse-echo systems

An alternative to rectification is proposed for detection of an ultrasonic signal. This method is especially useful in medical and non-destructive evaluation (nde) applications. With this method, the magnitude of the complex analytic signal is used to define the envelope of the ultrasonic waveform. The square of this quantity has been shown elsewhere to be equal to the true rate-of-arrival of energy. An earlier study, using digital data processing, has already demonstrated the superior resolvability of closely spaced interfaces obtained with the analytic signal magnitude, as compared to conventional rectification. Here, an analogue implementation is presented which utilizes single-sideband techniques to obtain both quadrature components of the analytic signal and its magnitude. A conventional transducer, pulser, and receiver are used.

Gammell, P. M.↗