Search NASA⌕ Search

SEARCH · Search NASA

Results for “North Slope”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

History Matching and Prediction of a Polymer Flood Pilot in Heavy Oil Reservoir on Alaska North Slope

The first-ever polymer flood pilot to enhance heavy oil recovery on Alaska North Slope is ongoing. After more than 3 years of polymer injection, significant benefit has been observed from the decrease in water cut from 65% to less than 15% in the project producers. The primary objective of this study is to develop a robust history-matched reservoir simulation model capable of predicting future polymer flood performance. In this work, the reservoir simulation model has been developed based on the geological model and available reservoir and fluid data. In particular, four high transmissibility strips were introduced to connect the injector-producer well pairs, simulating short-circuiting flow behavior that can be explained by viscous fingering and reproducing the water cut history. The strip transmissibilities were manually tuned to improve the history matching results during the waterflooding and polymer flooding periods, respectively. It has been found that higher strip transmissibilities match the sharp water cut increase very well in the waterflooding period. Then the strip transmissibilities need to be reduced with time to match the significant water cut reduction. The viscous fingering effect in the reservoir during waterflooding and the restoration of injection conformance during polymer flooding have been effectively represented. Based on the validated simulation model, numerical simulation tests have been conducted to investigate the oil recovery performance under different development strategies, with consideration for sensitivity to polymer parameter uncertainties. The oil recovery factor with polymer flooding can reach about 39% in 30 years, twice as much as forecasted with continued waterflooding. Besides, the updated reservoir model has been successfully employed to forecast polymer utilization, a valuable parameter to evaluate the pilot test’s economic efficiency. All the investigated development strategies indicate polymer utilization lower than 3.5 lbs/bbl in 30 years, which is less than that of the same polymer used in a polymer pilot in Argentina.

Wang, Xindan↗
NASA NTRS1979

Wetland classification on the Alaskan North Slope

An interactive supervised wetland classification was performed on Landsat digital data for three sites on the North Slope of Alaska. Color-coded classification maps identifying 10 wetland subcategories were produced. Field observations, topographic maps, and aerial photographs were employed as collateral data in classifying and verifying the Landsat information.

Morrow, J. W.↗
DOE OSTI2020

Experimental Investigation of Polymer Induced Fouling of Heater Tubes in the First-ever Polymer Flood Pilot on Alaska North Slope

Polymer flooding has been validated in the lab and by successful applications in other countries, such as Canada and China, to be an effective EOR technique for heavy oil reservoirs. Currently, polymer flooding is being pilot tested for the first time in the Schrader Bluff viscous oil reservoir at Milne Point field on Alaska North Slope (ANS). One of the major concerns of the operator is the impact of polymer on the oil production system after polymer breakthrough, especially the polymer induced fouling issues in the heat exchanger. This study investigates the propensity of polymer fouling on the heater tubes as a function of different variables, with the ultimate goal of determining safe and efficient operating conditions. A unique experimental set-up was indigenously designed and developed to simulate the fouling process on the heating tube. The influence of heating tube skin temperature, tube material, and polymer concentration on fouling tendency was investigated. Under each test condition, the test was run five times with the same tube, and in each run, the freshly prepared synthetic brine and polymer solution were heated from 77°F to 122°F to mimic field operating conditions. The heating time and fouling amount were recorded for each run. The morphology and composition of the deposit samples were analyzed by environmental scanning electron microscopy (ESEM) and X-ray diffraction (XRD), respectively. It has been found that, in general, the presence of polymer in produced fluids would aggravate the fouling issues on both carbon steel and stainless steel surfaces at all tested skin temperatures (165°F, 250 °F and 350°F), but only higher skin temperatures of 250°F and 350°F could cause polymer induced fouling issues on the copper tube surface and the fouling tendency increased with polymer concentration. At the lower skin temperatures of 165°F, no polymer-induced fouling was identified on the copper tube. A critical temperature that is related to the cloud point of the polymer solution was believed to exist, below which polymer induced fouling would not occur and only mineral scale deposited, but above which the polymer would obviously aggravate the fouling issue. The heating efficiency of the tube would be reduced gradually as more fouling material accumulates on its surface. The ESEM results indicate that if polymer precipitated and deposited on the surface, it would bond to the mineral crystals to form a stronger three- dimensional network structure, and that is why the polymer induced fouling was tougher and more difficult to be removed from the tube surface. The XRD analysis results confirm that the presence of polymer in the fluids can enhance the mineral scale propensity. Overall, the study results have provided practical guidance to the field operator for the ongoing polymer flooding pilot test on ANS. This study may also prove to be valuable for other chemical EOR projects around the world.

Alaska North Slope↗
DOE OSTI2025

Examining the Ice-Nucleating Particles from the North Slope of Alaska (ExINP-NSA) (Final Campaign Report)

The Examining the Ice-Nucleating Particles from the North Slope of Alaska (ExINP-NSA) campaign was conducted at the National Oceanic and Atmospheric Administration’s (NOAA) Barrow Atmospheric Baseline Observatory (71.3230° N, 156.6114° W, “BRW” hereafter), next to the Atmospheric Radiation Measurement (ARM) user facility NSA site and ~ 6 km northeast of the town of Utqiaġvik. The location of the NSA site is shown in Figure 1. Our observing period began in October 2021 and continued until May 2024. This campaign was funded by the U.S. Department of Energy (DOE) Office of Science Early Career Research Program through grant number DE-SC001879. This grant contains funding for three ARM field campaigns. The previous field campaigns were performed at ARM’s Southern Great Plains atmospheric observatory in Oklahoma (SGP; 36.6073° N, 97.4876° W) and the ARM’s Eastern North Atlantic atmospheric observatory on Graciosa Island, Azores (ENA; 39.0916° N, 28.0257° W). The ExINP-NSA campaign aims included: • Determining the number concentration of ice-nucleating particles (n INPs ) active at temperatures spanning the range of heterogeneous freezing processes (from ≈−30 °C to 0 °C) using a combination of online and offline measurements, • Determining whether local meteorological conditions and/or synoptic scale air mass transport impact INP abundance and/or ice nucleation efficiency, • Examining if the physicochemical properties of INPs relate to aerosol chemistry, and • Assessing if there is a similarity in INP properties across three ARM sites Multi-seasonal datasets of INP abundance in the NSA region were delivered from this campaign. This campaign also allowed researchers to perform a comprehensive analysis of atmospheric INPs based on long- term ground-based measurements in the Alaskan Arctic. Our data and results from the ExINP-NSA campaign will help refine current earth system models. One of the stated goals of ARM is to advance aerosol-cloud ice interaction, which will be a direct result of this campaign. Current earth system models poorly represent INPs, and the 15-minute time resolution data over several seasons generated during this campaign will provide an invaluable resource, especially combined with the datasets generated during two previous ARM ExINP campaigns. These datasets will allow for a greater understanding of ice nucleation processes as they may (or may not) relate to local meteorological processes and aerosol chemistry and will eventually help further the understanding of the Earth’s atmospheric processes and energy balance.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1978

Differences in radar return from ice-covered North Slope Lakes

Comparisons are made between L and X band synthetic aperture radar images of frozen lakes on the North Slope of Alaska and ground truth observations of the nature of their ice covers. It is shown that the differences in radar backscatter observed on different areas of a lake can be correlated with whether or not the lake is frozen completely to the bottom at the site in question. This explanation is reasonable inasmuch as the reflection coefficient associated with the high-dielectric contrast ice/water interface is significantly higher than that associated with a low-contrast ice/soil interface. However, the presence of the ice/water interface cannot be the only condition required for the higher backscatter because the ice/water interface per se would be specular at X and L band frequencies, causing the energy returned from the interface to be reflected away from the radar receiver. The other principal factor contributing to the return of energy from the ice/water interface to the receiver is believed to be the presence in the ice of numerous vertically elongated air bubbles which would act as scatters.

Weeks, W. F.↗
DOE OSTI2026

Temperature Inversions below 1 km from a V-Band Scanning Radiometer at the North Slope of Alaska

A single-channel (56.7 GHz) scanning radiometer was deployed in August 2022 at the Atmospheric Radiation Measurement (ARM) North Slope of Alaska site near Utqiaġvik. The radiometer is designed to provide temperature profiles between 0 and 1 km every 5 min. Averaging kernels show that this single-channel radiometer, taking observations at 10 discrete elevation angles, yields approximately the same information as a seven-channel V-band radiometer scanning three elevation angles. The instrument is able to reproduce the occurrence of temperature inversions between the surface and 1 km and their strength showing a correlation of 0.85, bias of −0.6 K, and slope of 1.04 with respect to radiosondes. Uncertainty in the inversion base height varies from 50 m near the surface to ∼300 m above 0.4 km when compared with radiosondes. Conversely, the inversion top height is overestimated and has higher uncertainty due to the degrading effects of the averaging kernels on the vertical resolution of the retrievals. Thanks to the high temporal resolution of the retrievals, the diurnal cycle of boundary layer temperature was evaluated showing that the radiometer can capture some aspects of the boundary layer thermal structure. The present analysis provides an overview of the capabilities of this simple observing configuration for selected applications.

Atmospheric profilers↗
DOE OSTI2021

Comparison of X1 (OLD) and X3 (NEW) Aerosol Observing Systems at the North Slope of Alaska NOAA Observatory

This report describes a comparison of the overlapping X1 and X3 Aerosol Observing Systems (AOS) at the North Slope of Alaska (NSA) observatory. Due to structural issues with the original observatory building, the National Oceanic and Atmospheric Administration (NOAA) funded the design and construction of a new observatory building. Construction began in 2019 and was completed in 2020. The now decommissioned old NOAA Barrow Observatory (BRW) housed the AOS referred to as an NSA external site X1 from October 1997 through August 2021. A new observatory building next door housed the AOS referred to as an NSA external site X3 starting in October 2020. In this document we will refer to the original observatory system measurements as 'OLD' and the measurements in the new building as 'NEW'.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Oil Recovery Prediction for Polymer Flood Field Test of Heavy Oil on Alaska North Slope Via Machine Assisted Reservoir Simulation

The first ever polymer flood field pilot to enhance the recovery of heavy oils on the Alaska North Slope is ongoing. This study constructs and calibrates a reservoir simulation model to predict the oil recovery performance of the pilot through machine-assisted reservoir simulation techniques. To replicate the early water breakthrough observed during waterflooding, transmissibility contrasts are introduced into the simulation model, forcing viscous fingering effects. In the ensuing polymer flood, these transmissibility contrasts are reduced to replicate the restoration of injection conformance during polymer flooding, as indicated by a significant decrease in water cut. Later, transmissibility contrasts are reinstated to replicate a water surge event observed in one of the producing wells during polymer flooding. This event may represent decreased injection conformance from fracture overextension; its anticipated occurrence in the other production well is included in the final forecast. The definition of polymer retention in the simulator incorporates the tailing effect reported in laboratory studies; this tailing effect is useful to the simultaneous history match of producing water cut and produced polymer concentration. The top 24 best-matched simulation models produced at each stage of the history matching process are used to forecast oil recovery. The final forecast clearly demonstrates that polymer flooding significantly increases the heavy oil production for this field pilot compared to waterflooding alone. This exercise displays that a simulation model is only valid for prediction if flow behavior in the reservoir remains consistent with that observed during the history matched period. Critically, this means that a simulation model calibrated for waterflooding may not fully capture the benefits of an enhanced oil recovery process such as polymer flooding. Therefore, caution is recommended in using basic waterflood simulation models to scope potential enhanced oil recovery projects.

Keith, Cody Douglas↗
DOE OSTI2022

Experimental Investigation of Polymer-Induced Fouling of Heater Tubes in the First-Ever Polymer Flood on Alaska North Slope Part II

A polymer flood pilot has been ongoing in the Schrader Bluff viscous oil reservoir at Milne Point on the Alaska North Slope. The results from the pilot are encouraging. However, a major concern of the operator is the influence of polymer on the production system after breakthrough, especially the fouling in heat exchangers. This work applies a multiexperimental approach to study the severity of polymer-induced fouling in both dynamic and static states of produced fluids to determine safe operating conditions. Dynamic scale loop (DSL) tests were conducted to study fouling due to polymer at different skin temperatures (165–350°F) in a dynamic state of fluid flow where the fluids’ flow mimics the residence time of fluids in the heat exchanger of the field pilot. Static deposit tests were also conducted at similar skin temperatures of 165–250°F using a novel experimental apparatus designed and built in-house. It was found that at higher skin temperatures of 250–350°F, tube blocking was observed in the DSL tests, whereas the tests at 165–200°F did not show any tube blocking, even in a more extended test period. The deposit test showed that the deposit rate generally increases with skin temperature, and the presence of polymer aggravates the fouling. The copper tube performs best when the skin temperatures are 165–200°F, while the stainless steel tube performs best at a skin temperature of 250°F. These experiments also manifested the influence of the cloudpoint of the solution as the deposit rate increased significantly when the skin temperature was higher than the solution cloudpoint. The study provides a source of practical guidance to the field operations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Performance of Low Salinity Polymer Flood in Enhancing Heavy Oil Recovery on the Alaska North Slope

Combining low-salinity water (LSW) and polymer flooding was proposed to unlock the tremendous heavy oil resources (20–25 billion barrels) on the Alaska North Slope (ANS). The synergy effect of LSW and polymer flooding was demonstrated through coreflooding experiments carried out on representative rock and fluid systems. The results indicate that the high-salinity polymer solution (HSP, 2,300 ppm, salinity=27,500 ppm) requires nearly two thirds more polymer than the low-salinity polymer (LSP, 1,400 ppm, salinity=2,500 ppm) to achieve the same target viscosity of 45 cp measured from viscometer. Additional oil (5–9%) can be recovered from LSW flooding after extensive high-salinity water (HSW) flooding. LSW flooding performed in secondary mode can achieve higher recovery than in tertiary mode. Strikingly, LSP flooding can further improve the oil recovery by ~8% even after extensive HSP flooding with the same viscosity. LSP flooding performed directly after waterflooding can achieve ~10% more incremental oil recovery. The pH increase of the effluent during LSW/LSP flooding was significantly greater than that during HSW/HSP flooding, indicating the occurrence of ion exchange which might contribute to the improved oil recovery. Also, the water breakthrough was delayed in a low-salinity flood compared with a high-salinity flood. The idea of combining LSW and polymer flooding has been put into practice on a pattern-scale field pilot test in the target Milne Point field. Nearly two-year observation has shown impressive success: water cut reduction (70% to below 15%), increasing oil rate, and no polymer breakthrough so far. This work has demonstrated remarkable economical and technical benefits of combination of LSW and polymer flooding in enhancing heavy oil recovery.

Zhao, Yang↗
DOE OSTI2021

Liquid Containing Clouds at the North Slope of Alaska Demonstrate Sensitivity to Local Industrial Aerosol Emissions

Abstract Cloud condensation nucleus control alter cloud solar albedo through cloud droplet size. Here, we leverage anthropogenic emissions at the North Slope of Alaska as a natural laboratory to study relationships between aerosols and Arctic liquid‐containing clouds. Averaging 14 years of MODIS observations, we found a reduction in temporally averaged cloud effective radius ( ) of up to 1.0 μm related to localized pollution. Pronounced regional gradients in cloud frequency of occurrence and liquid water path prohibit the detection of potential changes of these variables. Observed changes of alter radiative fluxes and increase cloud‐reflected shortwave radiation by up to 0.8 W m − 2 in the Prudhoe Bay area for the period covered by observations (April–September). Due to the frequent occurrence of liquid‐containing clouds, this implies that enhanced local emissions in Arctic regions can impact climate processes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Application of machine learning to characterize gas hydrate reservoirs in Mackenzie Delta (Canada) and on the Alaska north slope (USA)

Here, artificial neural network-trained models were used to predict gas hydrate saturation distributions in permafrost-associated deposits in the Eileen Gas Hydrate Trend on the Alaska North Slope (ANS), USA and at the Mallik research site in the Beaufort-Mackenzie Basin, Northwest Territories, Canada. The database of Logging-While-Drilling (LWD) and wireline logs collected at five wells (Mount Elbert, Ignik Sikumi, and Kuparuk 7–11–12 wells at ANS, plus 2L-38 and 5L-38 wells at the Mallik research site) includes more than 10,000 depth points, which were used for training, validation, and testing the machine learning (ML) models. Data used in training the ML models include the well logs of density, porosity, electrical resistivity, gamma radiation, and acoustic wave velocity measurements. Combinations of two or three out of these five well logs were found to reliably predict the gas hydrate saturation with accuracy varying between 80 and 90% when compared to the gas hydrate saturations derived from Nuclear Magnetic Resonance (NMR)-based technique. The ML models trained on data from three ANS wells achieved high fidelity predictions of gas hydrate saturation at the Mallik site. The results obtained in this study indicate that ML models trained on data from one geological basin can successfully predict key reservoir parameters for permafrost-associated gas hydrate accumulations within another basin. A generalized approach for selecting a well log combination that can improve model accuracy is discussed. Overall, the study outcome supports earlier work demonstrating that ML models trained on non-NMR well logs are a viable alternative to physics-driven methods for predicting gas hydrate saturations.

58 GEOSCIENCES↗
NASA NTRS1993

Change detection on Alaska's North Slope using repeat-pass ERS-1 SAR images

Measurements of the C-band (wavelength = 5 cm) radar cross section of an area in the Brooks Range foothills on the North Slope of Alaska using images from the ERS-1 satellite show significant temporal changes. These changes are strongly correlated with elevation and hillslope orientation and are greatest on some of the elevated areas and weaker in river drainages. By constructing 'difference images' using various image pairs, and by analyzing climatological and hydrological data from the site, we conclude that the radar backscatter changes are largely due to changes in soil and vegetation liquid water content induced by freeze/thaw events. The correlation with topography in the difference images arises from the dependence of vegetation, organic layer thickness, and volumetric water content on hillslope position and orientation. These results demonstrate the viability of radar backscatter intensity comparisons using repeat-pass images as a means of change detection.

Villasenor, John D.↗
DOE OSTI2026

North Slope of Alaska XSAPR b1 Data Processing Report: May 2025-April 2026

The U.S. Department of Energy’s Atmospheric Radiation Measurement (ARM) User Facility operates an X-band Scanning ARM Precipitation Radar (XSAPR) at the North Slope of Alaska (NSA) atmospheric observatory in Utqiaġvik. This radar provides year-round dual-polarization measurements of snow and ice in an arctic environment. Over the past few years, there has been greater focus on the NSA XSAPR, and recent efforts by ARM staff have resulted in quality-controlled, b-level data (Rocque et al. 2026b). This report outlines the processing of the second set of b-level data released for this radar from May 2025 through April 2026 following similar methods from Rocque et al. (2026b).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Assessment of North Slope of Alaska (NSA) Snow Monitoring Arrays

Arrays of instruments for monitoring winter precipitation (snowfall) and snow cover on the ground installed in 2017 at the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility’s North Slope of Alaska (NSA) C1 and at Oliktok Point sites became operational in 2018. In 2022, the instruments from Oliktok Point were moved to NSA E12, about 5.4 km south of NSA C1, where two arrays now operate. The instrument arrays monitor wind speed and direction, snow depth at multiple locations, the horizontal flux of blowing snow, and the number and fall speed of hydrometeors. The arrays are monitored using digital cameras. Collectively, the instruments produce a wealth of data on falling and accumulated snow, but, as with any instrument array, some data are more reliable and accurate than others. In this document, we present our findings on the efficacy, accuracy, and reliability of each type of instrument. Overall, a key finding is that no single instrument provides sufficient information to determine the source of falling snow particles nor the cause of changes in snow depth. However, if used in concert, the instruments produce a reliable understanding of the processes affecting the snow cover depth distribution and the true winter precipitation.

47 OTHER INSTRUMENTATION↗
DOE OSTI2026

Consolidation and Permeability of the B1 and D1 Gas Hydrate Bearing Sands and Associated Seal Sediments of the Extended-Duration Gas Production Test Site on the Alaska North Slope

Gas hydrate, a solid combination of gas (mostly methane in nature) and water molecules stable at low temperatures and elevated pressures, occurs naturally in marine and permafrost-associated environments. Gas hydrate reservoirs, such as those in the Alaska North Slope, have been considered potential energy resources for gas production. To understand the petrophysical and geo-mechanical characteristics of the reservoir, core samples retrieved from the site of the JOGMEC-DOE-USGS collaborative gas hydrate R&D project have been analyzed in the laboratory for their hydraulic and mechanical properties. This paper focuses on both seal and reservoir samples associated with the B1 and D1 sands, which are evaluated for index properties (including porosity, grain size distribution, liquid and plastic limits, specific surface area, and specific gravity), consolidation, permeability, and water retention. Furthermore, the reservoir core samples were tested with pore-filling, laboratory-grown tetrahydrofuran hydrate, in order to assess reservoir behavior during gas production from hydrates. Under simulated in situ stress conditions, the seal and hydrate-free reservoir cores had a permeability anisotropy ratio of k h /k v = 3.0−5.0, and k h /k v = 2.4−3.0 for the reservoir tetrahydrofuran hydrate-bearing cores. The data suggest that depressurizing the reservoir to induce hydrate dissociation alters the reservoir effective permeability in three ways: permeabilities decrease due to porosity lost (e.g., the initial reservoir thickness can decrease by up to 5% upon 7 MPa depressurization), permeability increases due to the loss of solid hydrate in the pore space, and permeability anisotropy k h /k v decreases in response to the evolving pore-space geometry. We show that given the simulated in situ gas hydrate saturations (i.e., S h = 32% in core 7P-2E and S h = 21% in core 20P-4), gas production from the dissociation of tetrahydrofuran hydrate in the two tested cores results in a net increase in effective permeability and a decrease in k h /k v . This study highlights the importance of investigating seal and reservoir sediments and the impacts of depressurization on the porosity and permeability responses during production.

Geological materials↗