Search NASA⌕ Search

SEARCH · Search NASA

Results for “OPTICAL PROPERTY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Understanding the optical properties of ambient sub- and supermicron particulate matter: results from the CARES 2010 field study in northern California

Abstract. Measurements of the optical properties (absorption, scattering and extinction) of PM1, PM2.5 and PM10 made at two sites around Sacramento, CA, during the June 2010 Carbonaceous Aerosols and Radiative Effects Study (CARES) are reported. These observations are used to establish relationships between various intensive optical properties and to derive information about the dependence of the optical properties on photochemical aging and sources. Supermicron particles contributed substantially to the total light scattering at both sites, about 50 % on average. A strong, linear relationship is observed between the scattering Ångström exponent for PM10 and the fraction of the scattering that is contributed by submicron particles (fsca, PM1) at both sites and with similar slopes and intercepts (for a given pair of wavelengths), suggesting that the derived relationship may be generally applicable for understanding variations in particle size distributions from remote sensing measurements. At the more urban T0 site, the fsca, PM1 increased with photochemical age, whereas at the downwind, more rural T1 site the fsca, PM1 decreased slightly with photochemical age. This difference in behavior reflects differences in transport, local production and local emission of supermicron particles between the sites. Light absorption is dominated by submicron particles, but there is some absorption by supermicron particles ( ∼ 15 % of the total). The supermicron absorption derives from a combination of black carbon that has penetrated into the supermicron mode and from dust, and there is a clear increase in the mass absorption coefficient of just the supermicron particles with increasing average particle size. The mass scattering coefficient (MSC) for the supermicron particles was directly observed to vary inversely with the average particle size, demonstrating that MSC cannot always be treated as a constant in estimating mass concentrations from scattering measurements, or vice versa. The total particle backscatter fraction exhibited some dependence upon the relative abundance of sub- versus supermicron particles; however this was modulated by variations in the median size of particles within a given size range; variations in the submicron size distribution had a particularly large influence on the observed backscatter efficiency and an approximate method to account for this variability is introduced. The relationship between the absorption and scattering Ångström exponents is examined and used to update a previously suggested particle classification scheme. Differences in composition led to differences in the sensitivity of PM2.5 to heating in a thermodenuder to the average particle size, with more extensive evaporation (observed as a larger decrease in the PM2.5 extinction coefficient) corresponding to smaller particles; i.e., submicron particles were generally more susceptible to heating than the supermicron particles. The influence of heating on the particle hygroscopicity varied with the effective particle size, with larger changes observed when the PM2.5 distribution was dominated by smaller particles.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Tuning magnetic and optical properties through strain in epitaxial LaCrO 3 thin films

We report on the effect of epitaxial strain on magnetic and optical properties of perovskite LaCrO 3 (LCO) single crystal thin films. Epitaxial LCO thin films are grown by pulsed laser deposition on proper choice of substrates to impose different strain states. A combined experimental and theoretical approach is used to demonstrate the direct correlation between lattice-strain and functional properties. The magnetization results show that the lattice anisotropy plays a critical role in controlling the magnetic behavior of LCO films. The strain induced tetragonality in the film lattice strongly affects the optical transitions and charge transfer gap in LCO. This study opens possibilities to tailor the functional properties of LCO and related materials by strain engineering in epitaxial growth.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Ionic and Optical Properties of Methylammonium Lead Iodide Perovskite across the Tetragonal–Cubic Structural Phase Transition

Abstract Practical hybrid perovskite solar cells (PSCs) must endure temperatures above the tetragonal–cubic structural phase transition of methylammonium lead iodide (MAPbI 3 ). However, the ionic and optical properties of MAPbI 3 in such a temperature range, and particularly, dramatic changes in these properties resulting from a structural phase transition, are not well studied. Herein, we report a striking contrast at approximately 45 °C in the ionic/electrical properties of MAPbI 3 owing to a change of the ion activation energy from 0.7 to 0.5 eV, whereas the optical properties exhibit no particular transition except for the steady increase of the bandgap with temperature. These observations can be explained by the “continuous” nature of perovskite phase transition. We speculate that the critical temperature at which the ionic/electrical properties change, although related to crystal symmetry variation, is not necessarily the same temperature as when tetragonal–cubic structural phase transition occurs.

Hoque, Md Nadim Ferdous↗
DOE OSTI2015

Electronic, transport, and optical properties of bulk and mono-layer PdSe 2

In this study, the electronic and optical properties of bulk and monolayer PdSe 2 are investigated using firstprinciples calculations. Using the modified Becke-Johnson potential, we find semiconductor behavior for both bulk and monolayer PdSe 2 with indirect gap values of 0.03 eV for bulk and 1.43 eV for monolayer, respectively. Our sheet optical conductivity results support this observation and show similar anisotropic feature in the 2D plane. We further study the thermoelectric properties of the 2D PdSe 2 using Blotzmann transport model and find interestingly high Seebeck coefficients (>200 μV/K) for both p- and n-type up to high doping level (–2 x 10 13 cm 2 ) with an anisotropic character in an electrical conductivity suggesting better thermoelectric performance along y direction in the plane.V

36 MATERIALS SCIENCE↗
DOE OSTI2015

Electronic structure and optical properties of α-(Fe{sub 1-x}V{sub x}){sub 2}O{sub 3} solid-solution thin films

We have examined the effect of V doping on the electronic and optical properties of epitaxial hematite (α-Fe{sub 2}O{sub 3}) thin films, by employing several characterization techniques and computational modeling. The conductivity of α-(Fe{sub 1-x}V{sub x}){sub 2}O{sub 3} (0 ≤ x ≤ ∼0.5) is enhanced by several orders of magnitude as x is increased, as evidenced by electrical resistivity measurements and x-ray photoelectron spectroscopy core-level and valence-band spectra. Optical absorption shows a reduction in the direct band gap by as much as 0.64 eV for x = 0.53 (E{sub g} = 1.46 eV) relative to that of α-Fe{sub 2}O{sub 3} (E{sub g} = 2.10 eV). Detailed understanding of the character of the optical transitions in the alloys is achieved using first-principles calculations of the ground and excited states. These calculations reveal that V doping results in occupied V 3d orbitals hybridized with Fe orbitals and located at approximately mid-gap in α-Fe{sub 2}O{sub 3}. The lowest energy transitions involve charge transfer from occupied V 3d to unoccupied Fe 3d* orbitals. With a low band gap and high conductivity, α-(Fe{sub 1-x}V{sub x}){sub 2}O{sub 3} is a promising material for photovoltaic and photoelectrochemical applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Aerosols from anthropogenic and biogenic sources and their interactions – modeling aerosol formation, optical properties, and impacts over the central Amazon basin

The Green Ocean Amazon experiment – GoAmazon 2014–2015 – explored the interactions between natural biogenic forest emissions from central Amazonia and urban air pollution from Manaus. Previous GoAmazon 2014–2015 studies showed that nitrogen oxide (NO x = NO + NO 2 ) and sulfur oxide (SO x ) emissions from Manaus strongly interact with biogenic volatile organic compounds (BVOCs), affecting secondary organic aerosol (SOA) formation. In previous studies, ground-based and aircraft measurements provided evidence of SOA formation and strong changes in aerosol composition and properties. Aerosol optical properties also evolve, and their impacts on the Amazonian ecosystem can be significant. As particles age, some processes, such as SOA production, black carbon (BC) deposition, particle growth and the BC lensing effect change the aerosol optical properties, affecting the solar radiation flux at the surface. This study analyzes data and models SOA formation using the Weather Research and Forecasting with Chemistry (WRF-Chem) model to assess the spatial variability in aerosol optical properties as the Manaus plumes interact with the natural atmosphere. The following aerosol optical properties are investigated: single scattering albedo (SSA), asymmetry parameter (g aer ), absorption Ångström exponent (AAE) and scattering Ångström exponent (SAE). These simulations were validated using ground-based measurements at three experimental sites, namely the Amazon Tall Tower Observatory – ATTO (T0a), downtown Manaus (T1), Tiwa Hotel (T2) and Manacapuru (T3), as well as the U.S. Department of Energy (DOE) Gulfstream 1 (G-1) aircraft flights. WRF-Chem simulations were performed over 7 d during March 2014. Results show a mean biogenic SOA (BSOA) mass enrichment of 512 % at the T1 site, 450 % in regions downwind of Manaus, such as the T3 site, and 850 % in areas north of the T3 site in simulations with anthropogenic emissions. The SOA formation is rather fast, with about 80 % of the SOA mass produced in 3–4 h. Comparing the plume from simulations with and without anthropogenic emissions, SSA shows a downwind reduction of approximately 10 %, 11 % and 6 % at the T1, T2 and T3 sites, respectively. Other regions, such as those further downwind of the T3 site, are also affected. The g aer values increased from 0.62 to 0.74 at the T1 site and from 0.67 to 0.72 at the T3 site when anthropogenic emissions are active. During the Manaus plume-aging process, a plume tracking analysis shows an increase in SSA from 0.91 close to Manaus to 0.98 160 km downwind of Manaus as a result of SOA production and BC deposition.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2016

The CU 2-D-MAX-DOAS instrument – Part 2: Raman scattering probability measurements and retrieval of aerosol optical properties

Abstract. The multiannual global mean of aerosol optical depth at 550 nm (AOD550) over land is ∼ 0.19, and that over oceans is ∼ 0.13. About 45 % of the Earth surface shows AOD550 smaller than 0.1. There is a need for measurement techniques that are optimized to measure aerosol optical properties under low AOD conditions. We present an inherently calibrated retrieval (i.e., no need for radiance calibration) to simultaneously measure AOD and the aerosol phase function parameter, g, based on measurements of azimuth distributions of the Raman scattering probability (RSP), the near-absolute rotational Raman scattering (RRS) intensity. We employ radiative transfer model simulations to show that for solar azimuth RSP measurements at solar elevation and solar zenith angle (SZA) smaller than 80°, RSP is insensitive to the vertical distribution of aerosols and maximally sensitive to changes in AOD and g under near-molecular scattering conditions. The University of Colorado two-dimensional Multi-AXis Differential Optical Absorption Spectroscopy (CU 2-D-MAX-DOAS) instrument was deployed as part of the Two Column Aerosol Project (TCAP) at Cape Cod, MA, during the summer of 2012 to measure direct sun spectra and RSP from scattered light spectra at solar relative azimuth angles (SRAAs) between 5 and 170°. During two case study days with (1) high aerosol load (17 July, 0.3 < AOD430 < 0.6) and (2) near-molecular scattering conditions (22 July, AOD430 < 0.13) we compare RSP-based retrievals of AOD430 and g with data from a co-located CIMEL sun photometer, Multi-Filter Rotating Shadowband Radiometer (MFRSR), and an airborne High Spectral Resolution Lidar (HSRL-2). The average difference (relative to DOAS) for AOD430 is +0.012 ± 0.023 (CIMEL), −0.012 ± 0.024 (MFRSR), −0.011 ± 0.014 (HSRL-2), and +0.023 ± 0.013 (CIMELAOD − MFRSRAOD) and yields the following expressions for correlations between different instruments: DOASAOD = −(0.019 ± 0.006) + (1.03 ± 0.02) × CIMELAOD (R2 = 0.98), DOASAOD = −(0.006 ± 0.005) + (1.08 ± 0.02) × MFRSRAOD (R2 = 0.98), and CIMELAOD = (0.013 ± 0.004) + (1.05 ± 0.01) × MFRSRAOD (R2 = 0.99). The average g measured by DOAS on both days was 0.66 ± 0.03, with a difference of 0.014 ± 0.05 compared to CIMEL. Active steps to minimize the error in the RSP help to reduce the uncertainty in retrievals of AOD and g. As AOD decreases and SZA increases, the RSP signal-to-noise ratio increases. At AOD430 ∼ 0.4 and 0.10 the absolute AOD errors are ∼ 0.014 and 0.003 at 70° SZA and 0.02 and 0.004 at 35° SZA. Inherently calibrated, precise AOD and g measurements are useful to better characterize the aerosol direct effect in urban polluted and remote pristine environments.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2015

Optical properties and plasmonic response of silver-gallium nanostructures

Silver and gallium form an alloy Ag{sub 2}Ga via a room temperature spontaneous self-assembly that exhibits remarkable mechanical and electrical properties suitable for nanoscale measurements. However, whether photon excitation of plasmons in this emerging nanomaterial is retained or not has not been established. Here, we present a thin film formation of Ag{sub 2}Ga via a spreading-reactive process of liquid Ga on an Ag film and a characterization of its dielectric function ϵ(E) = ϵ{sub 1}(E) + iϵ{sub 2}(E) in the photon energy range 1.42 eV ≤ E < 4.2 eV. It is observed that while the plasmon damping increases, near an energy of 2.25 eV, the real part of ϵ exhibits a crossing with respect to that of Ag. Furthermore, the impact of new plasmon supporting materials is discussed and in order to enable further applications in plasmonics, the possibility of photon excitation of surface plasmons in Ag{sub 2}Ga is studied.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
NASA NTRS1999

Global Aerosol Radiative Forcing Derived from Sea WiFS-Inferred Aerosol Optical Properties

Aerosol optical properties inferred from the Sea-viewing Wide Field-of-view Sensor (SeaWiFS) radiance measurements are used to compute the aerosol shortwave radiative forcing using a radiative transfer model. The aerosol optical thickness at the wavelength of 865-nm is taken from the SeaWIFS archive. It is found that the nominal optical thickness over oceans ranges from 0.1 to 0.2. Using a maritime aerosol model and the radiances measured at the various SeaWiFS channels, the Angstrom exponent is determined to be 0.2174, the single-scattering albedo to be 0.995, and the asymmetry factor to be 0.786. The radiative transfer model has eight bands in the visible and ultraviolet spectral regions and three bands in the near infrared. It includes the absorption due to aerosols, water vapor, carbon dioxide, and oxygen, and the scattering due to aerosols and gases (Rayleigh scattering). The radiative forcing is computed over global oceans for four months (January, April, July, and October, 1998) to represent four seasons. It is found that the aerosol radiative forcing is large and changes significantly with seasons near the continents with large-scale forest fires and desert dust. Averaged over oceans and the four months, the aerosol radiative forcing is approximately 7 W/sq m at the top of the atmosphere. This large radiative forcing is expected to have a significant cooling effect on the Earth's climate as implied from simulations of a number of general circulation models.

Chou, Ming-Dah↗
DOE OSTI2017

Syntheses, crystal structures, and optical properties of CsBa{sub 5}Ti{sub 2}Se{sub 9}Cl and CsBa{sub 2}Cl{sub 5}

The mixed-cation compounds CsBa{sub 5}Ti{sub 2}Se{sub 9}Cl and CsBa{sub 2}Cl{sub 5} were synthesized in the same solid-state reaction at 1173 K. CsBa{sub 5}Ti{sub 2}Se{sub 9}Cl adopts the Cs{sub 3}CoCl{sub 5} structure type in the tetragonal crystal system whereas CsBa{sub 2}Cl{sub 5} crystallizes in the PbU{sub 2}Se{sub 5} structure type in the monoclinic crystal system. The CsBa{sub 5}Ti{sub 2}Se{sub 9}Cl structure displays both Cs/Ba and Se/Cl disorder. From optical absorption measurements CsBa{sub 5}Ti{sub 2}Se{sub 9}Cl is an indirect wide-gap semiconductor. From theoretical calculations CsBa{sub 2}Cl{sub 5} has a large band gap of 6.4 eV. - Graphical abstract: General view of the crystal structure of CsBa{sub 5}Ti{sub 2}Se{sub 9}Cl. Display Omitted - Highlights: • CsBa{sub 5}Ti{sub 2}Se{sub 9}Cl is an indirect wide-gap semiconductor. • Red crystals of CsBa{sub 5}Ti{sub 2}Se{sub 9}Cl show an absorption transition at 2.00(2) eV. • As expected, DFT calculations indicate CsBa{sub 2}Cl{sub 5} has a large band gap of 6.4 eV. • Unexpectedly, crystals of CsBa{sub 2}Cl{sub 5} are pink, perhaps from minimal Ti impurities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Structural phase transition, electronic structure and optical properties of half Heusler alloys LiBeZ (Z = As, Sb)

Ab initio calculations are performed to investigate the structural stability, electronic structure, mechanical properties and optical properties of half Heusler alloys (LiBeAs and LiBeSb) for three different phases of zinc blende crystal structure. Among the considered phases, α- phase is found to be the most stable phase for these alloys at normal pressure. A pressure induced structural phase transition from α-phase to β- phase is observed for LiBeAs. The electronic structure reveals that these alloys are semiconductors. The optical properties confirm that these alloys are semiconductor in nature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Ellipsometric characterization and density-functional theory analysis of anisotropic optical properties of single-crystal α-SnS

We report on the anisotropic optical properties of single-crystal tin monosulfide (SnS). The components ε{sub a}, ε{sub b}, and ε{sub c} of the pseudodielectric-function tensor (ε)=(ε₁)+i(ε₂) spectra are taken from 0.73 to 6.45 eV by spectroscopic ellipsometry. The measured (ε) spectra are in a good agreement with the results of the calculated dielectric response from hybrid density functional theory. The (ε) spectra show the direct band-gap onset and a total of eight above-band-gap optical structures that are associated with the interband-transition critical points (CPs). We obtain accurate CP energies by fitting analytic CP expressions to second-energy-derivatives of the (ε) data. Their probable electronic origins and implications for photovoltaic applications are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗