Search NASA⌕ Search

SEARCH · Search NASA

Results for “ORIGEN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Development of a Clad Activation Capability in BISON using ORIGEN

This work describes the ongoing coupling work establishing ORIGEN as a physics module for depletion, activation, and decay in the MOOSE/BISON fuel performance code. The current phase has focused on the implementation of an activation model, mainly intended for evaluation and comparison of accident tolerant cladding designs within a single fuel performance framework. The next phase will develop a capability for fuel depletion. New aspects of this work include: investigation of how to allow the high-fidelity ORIGEN capability to be interoperable extension of existing lower-fidelity cladding models (e.g. based only on fast fluence), introduction of recalculation thresholds to reduce computational cost during multi-physics iterations, and runtime experiments to assess the cost of this additional physics relative to the baseline MOOSE/BISON fuel performance calculations. The current results show activation increases runtime by a factor of approximately 7, but additional optimizations, discussed in the conclusions, are possible.

Wieselquist, William↗

PWR ENDF/B-VII cross-section libraries for ORIGEN-ARP

New pressurized water reactor (PWR) cross-section libraries were generated for use with the ORIGEN-ARP depletion sequence in the SCALE nuclear analysis code system. These libraries are based on ENDF/B-VII nuclear data and were generated using the two-dimensional depletion sequence, TRITON/NEWT, in SCALE 6.1. The libraries contain multiple burnup-dependent cross-sections for seven PWR fuel designs, with enrichments ranging from 1.5 to 6 wt% {sup 235}U. The burnup range has been extended from the 72 GWd/MTU used in previous versions of the libraries to 90 GWd/MTU. Validation of the libraries using radiochemical assay measurements and decay heat measurements for PWR spent fuel showed good agreement between calculated and experimental data. Verification against detailed TRITON simulations for the considered assembly designs showed that depletion calculations performed in ORIGEN-ARP with the pre-generated libraries provide similar results as obtained with direct TRITON depletion, while greatly reducing the computation time. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Development of the MCNP-ORIGEN activation automation tool

This paper introduces the MCNP-ORIGEN activation automation tool for streamlining the calculation of experiment source terms. This tool couples the Monte-Carlo radiation-transport solver, MCNP to the depletion tool, ORIGEN-S. To showcase its current capabilities, this paper presents an activation analysis exercise, which is conducted with Serpent, and the results are com- pared. The experiment consists in a 90%-enriched uranium sphere surrounded by light water. A non-fissile cylinder is placed in the water, representing an irradiation experiment. We conducted simulations for 2 different cylinder materials: iron and cobalt at two different temperatures: 300 K and 900 K. The exercise consists of an irradiation of 50 days at a constant power of 5 MW, followed by a decay of 50 days. These studies highlight the discrepancies between how the different tools handle nuclear data. Finally, the results underscore multiple areas of possible improvement.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Rapid concentration and isotopic measurements of ultra-trace 235 U fission products with comparison to an ORIGEN isotope depletion model

We introduce the application of an automated online separation–direct analysis method, RAPID (Rapid Analysis of Post-Irradiation Debris), for the simultaneous measurement of both radioactive and stable fission isotopes from an irradiated highly-enriched uranium target. Developed for the measurement of the concentration and isotopic composition of over 40 elements down to the femtogram level, the RAPID method possesses the sensitivity, stability, and precision needed to achieve accurate, low-level analyses of elements of non-natural origin. The isotopic compositions and concentrations of key fission elements cesium, strontium, yttrium, lanthanum, cerium, praseodymium, neodymium, promethium, and samarium have been measured repeatedly over a six-week period. The validity of these measurements was confirmed using ORIGEN (Oak Ridge Isotope GENeration), an isotope depletion and decay modeling software, to within 1–3%.

07 ISOTOPE AND RADIATION SOURCES↗

Status Assessment of the PROTEUS-ORIGEN Coupling

As part of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) Campaign of the U.S. Department of Energy, Office of Nuclear Energy, an initiative was started to provide time dependent isotopic modeling capabilities to the PROTEUS neutronics module of the Simulation based High-efficiency Advanced Reactor Prototyping (SHARP) toolkit. This capability is to be provided through a coupling with the Oak Ridge Isotope Generation (ORIGEN) code, which is part of the SCALE code package developed and maintained at Oak Ridge National Laboratory. This development has been a joint effort between the developers of PROTEUS at Argonne National Laboratory (ANL) and Oak Ridge National Laboratory (ORNL).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

ORIGEN Library Manager

OLM focuses on managing the ORIGEN reactor library, which is a special collection of data that enables rapid spent fuel calculations with SCALE/ORIGAMI.

Wieselquist, WilliamAdam [Oak Ridge National Labor↗

Assessment of ORIGEN Reactor Library Development for Pebble-Bed Reactors Based on the PBMR-400 Benchmark

This report provides an evaluation of present SCALE capabilities for modeling depletion of pebble-bed reactor systems, using the PBMR-400 benchmark as a test case. A specific aim of this work is to understand the system characteristics required to generate production-quality reactor data libraries for rapid depletion calculations with ORIGEN. This report includes a discussion of present SCALE capabilities for modeling doubly heterogeneous fuels, prior SCALE work modeling pebble bed–type reactors, and a detailed neutronic analysis of the PBMR-400 core for both fresh and equilibrium-composition core conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Activation Calculation for the Dismantling and Decommissioning of a Light Water Reactor Using MCNP{sup TM} with ADVANTG and ORIGEN-S

The boiling water reactor (BWR) Philippsburg 1 (KKP1) and the pressurized water reactor (PWR) Neckarwestheim 1 (GKN I), with a thermal power of 2575 MW{sub th} resp. 2497 MW{sub th}, were shut down and entered directly the post-operational phase which is covered by the operating license held by the nuclear power plant owner. The decommissioning of a nuclear power plant (NPP) which is licensed under chap. 7 of the German Atomic Energy Act, following the post-operational phase requires a comprehensive licensing procedure including in particular radiation protection aspects and possible impacts to the environment. Decommissioning requires a decommissioning license. This will include essential changes in requirements for the systems and components and will mainly lead to the immediate dismantling of the nuclear power plant which is now the only permitted decommissioning strategy in Germany. In this context, neutron activation calculations for the structural components of KKP1 and GKN I have to be carried out to predict occurring activities and to estimate future costs for conditioning and packaging. To avoid an overestimation of the radioactive inventory and to calculate the expenses for decommissioning as accurate as possible, modern state-of-the-art Monte-Carlo-Techniques (MCNP6) combined with automated variance reduction tools (ADAVANTG) are used and are coupled with the activation and decay module ORIGEN-S. This paper presents the calculation procedure and the obtained results with a validation by measured activations and gamma dose rates.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Automating the Coupling of ORIGEN with GADRAS via the Fallout Analysis Tool for National Technical Nuclear Forensics

Nuclear forensic teams will be deployed to collect and evaluate fallout samples on the ground in the scenario of a low-yield nuclear detonation in a heavily populated area. Quick non-destructive methods of predicting the quality of the sample before it is analyzed in detail are essential for efficient post-event collections. In this work, the process of exporting Defense Land Fallout Interpretive Code (DELFIC) results into Gamma Detector Response and Analysis Software (GADRAS) has been automated within the Fallout Analysis Tool. This coupling allows for the simulation of detector responses to fallout samples with varying degrees of fractionation. The degree to which the samples are fractionated depends on the location of the samples in the fallout field. In the following study, this phenomenon is examined, as its understanding is important to the investigation of debris distribution. The simulated detector spectra from GADRAS can be used to compare peak ratios of volatile-refractory isotope pairs in order to determine the degree of fractionation. Simulated fractionated fallout samples from DELFIC for a 10 kt, pure 235U fission surface burst were modeled for distances ranging to 256 km out from ground zero, and for times up to 1 week from detonation. The fractionation ratios, also known as r values, from isotope concentrations, photon lines and peak areas of four volatile-refractory pairs were calculated and compared. Fractionation prediction via the peak areas method was evaluated for each pair by comparing the results with the simulated radionuclide inventory.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗