Search NASA⌕ Search

SEARCH · Search NASA

Results for “Observation length”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Pressure-temperature phase diagram of CaK ( Fe 1 – x Mn x ) 4 As 4 ( x = 0.024 )

Resistance measurements on single crystals of CaK(Fe 1–x Mn x ) 4 As 4 (x = 0.024) were performed under hydrostatic pressure up to 5.15 GPa. The pressure dependence of the magnetic and superconducting transition temperatures and that of the superconducting upper critical field are reported. Furthermore, our results show that upon increasing pressure, the magnetic transition temperature T N is suppressed, whereas the superconducting transition temperature T c first increases and then decreases, exhibiting a maximum at a pressure p c corresponding to the intersection of the T N (p) and T c (p) lines. In addition, a minimum in the normalized slope of the superconducting upper critical field as well as a change in the pressure dependence of the inferred superconducting coherence length are observed at p c , suggesting a difference in the Fermi surface of the paramagnetic and antiferromagnetic states. Finally, CaK(Fe 1–x Mn x ) 4 As 4 (x = 0.024) likely goes through a half-collapsed tetragonal phase transition at ~4.3 GPa, further demonstrating that the half-collapsed tetragonal transition pressure in the CaKFe 4 As 4 system is relatively insensitive to transition metal substitution.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Study of Magnetic Field and Turbulence in the TeV Halo around the Monogem Pulsar

Magnetic fields are ubiquitous in the interstellar medium, including extended objects such as supernova remnants and diffuse halos around pulsars. Its turbulent characteristics govern the diffusion of cosmic rays and the multiwavelength emission from pulsar wind nebulae (PWNe). However, the geometry and turbulence nature of the magnetic fields in the ambient region of PWN is still unknown. Recent gamma-ray observations from HAWC and synchrotron observations suggest a highly suppressed diffusion coefficient compared to the mean interstellar value. In this study, we present the first direct observational evidence of the orientation of the mean magnetic field and turbulent characteristics by employing a recently developed statistical parameter "Y turb " in the extended halo around the Monogem pulsar. Our study points to two possible scenarios: nearly aligned toward the line of sight (LOS) with compressible modes dominance or high inclination angle toward the LOS and characterized by Alfvénic turbulence. The first scenario appears consistent with other observational signatures. Furthermore, we report that the magnetic field has an observed correlation length of approximately 3 ± 0.6 pc in the Monogem halo. Our study highlights the pivotal role of magnetic field and turbulence in unraveling the physical processes in TeV halos and cosmic-ray transport.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

A modern concept of Lagrangian hydrodynamics

Here, we offer a modern interpretation of Lagrangian hydrodynamics as employed in Lagrangian simulations of compressible fluid flow. Our main result is to show that artificial viscosity, traditionally viewed as a numerical artifice to control unphysical oscillations in flows with shocks, actually represents a physical process and is necessary to derive accurate simulations in any compressible flow. We begin by reviewing the origins of two numerical devices, artificial viscosity and finite-volume methods. We proceed to construct a mathematical (PDE) model that incorporates those numerics and in which a new length scale, the observer, arises representing the discretization. Associated with that length scale, there are new inviscid fluxes that are the artificial viscosity as first formulated by Richtmyer and an artificial heat flux postulated by Noh but typically not included in Lagrangian codes. We discuss the connection of our results to bivelocity hydrodynamics. We conclude with some speculation as to the direction of future developments in multidimensional Lagrangian codes as computers get faster and have larger memories.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Diagnostic assessment of reservoir response to fracturing: a case study from Hydraulic Fracturing Test Site (HFTS) in Midland Basin

Abstract This paper outlines a data collection and diagnostics case study involving multiple horizontal shale wells. We look at well production profiles using rate transient analysis, differences in near wellbore complexity, geologic variations within the area of interest, as well as compositional differences in the rocks based on cores obtained from within the stimulated reservoir. The Hydraulic Fracturing Test Site is a multi-well experiment involving stimulation of unconventional shale wells in the southeastern Midland portion of the Permian Basin. The targeted formations include both the upper as well as the middle Wolfcamp formations, also referred alternatively as Wolfcamp A and Wolfcamp B. Data integration and analysis shared in this paper help us understand the various geologic controls impacting well productivity, particularly the wide variance observed between the Wolfcamp A and Wolfcamp B formations. Rate transient analysis indicates similar system permeabilities for stimulated wells. However, we observe higher effective fracture half-lengths for upper Wolfcamp wells. Using observations from 3D seismic interpretations (such as pad scale faults) as well as petrophysical and image log data, we highlight the substantial differences in stimulation as we move along the well laterals from the heel toward the toe sections. These differences are further reconciled with observations from zones with high data density at the core locations through stimulated rock, as well as independent data such as microseismic emissions. At the test site, Wolfcamp A was found to be relatively quartz rich with significant heterogeneity whereas Wolfcamp B is richer in clay and organic content. This impacts the geomechanical characteristics of the rock mass with much higher natural fracture density in the shallower interval. Thus, the fracture growth is more uniform in the deeper interval and more heterogeneous with branching likely in upper interval. Increased complexity also leads to consistently better productivity from the wells in the shallower interval as demonstrated from RTA results. This case study is unique because it provides valuable insights from actual sampling of the stimulated zones in hydraulically fractured wells and helps understand impact of various factors that contribute toward variability in well production. The findings from this study provides insights into need for optimization of completion designs in the various Wolfcamp landing zones, such as optimization of cluster or fracture spacing in various Wolfcamp intervals. In addition, it provides a useful template for data collection and research direction in future field test sites of similar nature in unconventional reservoirs.

Energy & Fuels↗
DOE OSTI2022

Heterogeneous isotope effects decouple conifer leaf and branch sugar δ 18 O and δ 13 C

Isotope ratios of tree-ring cellulose are a prominent tool to reconstruct paleoclimate and plant responses to environmental variation. Current models for cellulose isotope ratios assume a transfer of the environmental signals recorded in bulk leaf water to carbohydrates and ultimately into stem cellulose. However, the isotopic signal of carbohydrates exported from leaf to branch may deviate from mean leaf values if spatial heterogeneity in isotope ratios exists in the leaf. We tested whether the isotopic heterogeneity previously observed along the length of a ponderosa pine (Pinus ponderosa) leaf water was preserved in photosynthetic products. We observed an increase in both sugar and bulk tissue δ 18 O values along the needle, but the increase in carbohydrate δ 18 O values was dampened relative to the trend observed in leaf water. In contrast, δ 13 C values of both sugar and bulk organic matter were invariant along the needle. Additionally, phloem-exported sugar measured in the branch below the needles did not match whole-needle values of δ 18 O or δ 13 C. Instead, there was a near-constant offset observed between the branch and needle sugar δ 13 C values, while branch δ 18 O values were most similar to δ 18 O values observed for sugar at the base of the needle. The observed offset between the branch and needle sugar δ 18 O values likely arises from partial isotope oxygen exchange between sugars and water during phloem loading and transport. An improved understanding of the conditions producing differential δ 13 C and δ 18 O isotope effects between branch phloem and needle sugars could improve tree-ring-based climate reconstructions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Faster Form of Electron Magnetic Reconnection with a Finite Length X-Line

Observations in Earth’s turbulent magnetosheath downstream of a quasiparallel bow shock reveal a prevalence of electron-scale current sheets favorable for electron-only reconnection where ions are not coupled to the reconnecting magnetic fields. In small-scale turbulence, magnetic structures associated with intense current sheets are limited in all dimensions. And since the coupling of ions are constrained by a minimum length scale, the dynamics of electron reconnection is likely to be 3D. Here, both 2D and 3D kinetic particle-in-cell simulations are used to investigate electron-only reconnection, focusing on the reconnection rate and associated electron flows. A new form of 3D electron-only reconnection spontaneously develops where the magnetic X-line is localized in the out-of-plane (z) direction. The consequence is an enhancement of the reconnection rate compared with two dimensions, which results from differential mass flux out of the diffusion region along z, enabling a faster inflow velocity and thus a larger reconnection rate. This outflow along z is due to the magnetic tension force in z just as the conventional exhaust tension force, allowing particles to leave the diffusion region efficiently along z unlike the 2D configuration.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Enhanced interactions of Kuroshio Extension with tropical Pacific in a changing climate

Quasi-decadal climate of the Kuroshio Extension (KE) is pivotal to understanding the North Pacific coupled ocean–atmosphere dynamics and their predictability. Recent observational studies suggest that extratropical-tropical coupling between the KE and the central tropical Pacific El Niño Southern Oscillation (CP-ENSO) leads to the observed preferred decadal time-scale of Pacific climate variability. By combining reanalysis data with numerical simulations from a high-resolution climate model and a linear inverse model (LIM), we confirm that KE and CP-ENSO dynamics are linked through extratropical-tropical teleconnections. Specifically, the atmospheric response to the KE excites Meridional Modes that energize the CP-ENSO (extratropicstropics), and in turn, CP-ENSO teleconnections energize the extratropical atmospheric forcing of the KE (tropicsextratropics). However, both observations and the model show that the KE/CP-ENSO coupling is non-stationary and has intensified in recent decades after the mid-1980. Given the short length of the observational and climate model record, it is difficult to attribute this shift to anthropogenic forcing. However, using a large-ensemble of the LIM we show that the intensification in the KE/CP-ENSO coupling after the mid-1980 is significant and linked to changes in the KE atmospheric downstream response, which exhibit a stronger imprint on the subtropical winds that excite the Pacific Meridional modes and CP-ENSO.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

How the existence of unstable neutral media restricts the aspect ratio of cold neutral media?

ABSTRACT The ubiquity of very thin and lengthy cold neutral medium (CNM) has been reported by multiple authors in the H i community. Yet, the reason of how the CNM can be so long and lengthy is still in debate. In this paper, we recognize a new type of instability due to the attractive nature of the pressure force in the unstable phase. We provide a new estimation of the average CNM filament aspect ratio with the consideration of force balances at the phase boundary, which is roughly 5–20 in common CNM environment. We show that most of the cold filaments are less filamentary than what usually predicted via MHD turbulence theory or inferred from observations: The average length of CNM filament is roughly 1/2 of that in isothermal MHD turbulence with similar turbulence conditions. This suggests that the ‘cold filaments’ that are identified in observations might not be in pressure equilibrium or generated via other mechanisms.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Length scales and scale-free dynamics of dislocations in dense solid solutions

The fundamental interactions between an edge dislocation and a random solid solution are studied by analyzing dislocation line roughness profiles obtained from molecular dynamics simulations of Fe 0.70 Ni 0.11 Cr 0.19 over a range of stresses and temperatures. These roughness profiles reveal the hallmark features of a depinning transition. Namely, below a temperature-dependent critical stress, the dislocation line exhibits roughness in two different length scale regimes which are divided by a so-called correlation length. This correlation length increases with applied stress and at the critical stress (depinning transition or yield stress) formally goes to infinity. Above the critical stress, the line roughness profile converges to that of a random noise field. Motivated by these results, a physical model is developed based on the notion of coherent line bowing over all length scales below the correlation length. Above the correlation length, the solute field prohibits such coherent line bow outs. Using this model, we identify potential gaps in existing theories of solid solution strengthening and show that recent observations of length-dependent dislocation mobilities can be rationalized.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The variation in self-organized anode plasma pattern structure with solution electrolyte type in 1 atm DC glow discharge

Abstract Plasma self-organization on anode surfaces in 1 atm DC glow discharges remains poorly understood. This effort aims to elucidate the nature of self-organization through the experimental study of resulting patterns on liquid anode surfaces with 13 different electrolytes and thus improves our understanding of the underlying physical processes that give rise to self-organization by investigating electrolyte sensitivity. Self-organization pattern formation and behavior were studied as a function of discharge current, solution ionic strength, and their chemical property evaluation. The response of the patterns to variation in these parameters was measured using an imaging camera and optical emission spectroscopy. Observed pattern characteristic length scales for all of the electrolytes were ranged from 2 to 13 mm and typically increased with current over the investigated range of 20–80 mA. Complex self-organized pattern structures not reported to date were also observed. The parameters associated with pattern formation and morphology complexity are discussed and summarized.

Physics↗
DOE OSTI2022

Determination of Location-Specific Solidification Cracking Susceptibility for a Mixed Dissimilar Alloy Processed by Wire-Arc Additive Manufacturing

Solidification cracking is a major obstacle when joining dissimilar alloys using additive manufacturing. In this work, location-specific solidification cracking susceptibility has been investigated using an integrated computational materials engineering (ICME) approach for a graded alloy formed by mixing P91 steel and Inconel 740H superalloy. An alloy mixture of 26 wt.% P91 and 74 wt.% Inconel 740H, with high configurational and total entropy, was fabricated using wire arc additive manufacturing. Microstructure characterization revealed intergranular solidification cracks in the FCC matrix, which increased in length along with the enrichment of Nb (~27 to 56 wt.%) and Cu (~87 wt.%) in the middle and top regions. DICTRA simulations to model location-specific solidification cracking susceptibility showed that the top region with the highest cooling rate (270 K/s) has the highest solidification cracking susceptibility in comparison with the middle and bottom regions. This is in good agreement with the experimentally observed varying crack length. From Scheil simulations, it was deduced that enrichment of Nb and Cu affected the solidification range as high as ~77%, in comparison with the matrix composition. The overall solidification cracking susceptibility and freezing range was highest for the 26 wt.% P91 alloy amongst the mixed compositions between P91 steel and 740H superalloy, proving that solidification characteristics play a major role in alloy design for additive manufacturing.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2022

Investigation of the Self-Assembly Behavior of Statistical Bottlebrush Copolymers via Self-Consistent Field Theory Simulations

Bottlebrush copolymers, a class of high-density side-chain-grafted copolymers with high molecular weights, have recently attracted extensive research attention due to the dramatic reduction of chain entanglement in these copolymers, unique self-assembly behaviors, and distinctive physical properties. In this study, we employ self-consistent field theory simulations to systemically investigate the phase behavior of statistical bottlebrush copolymers A-stat-B, an intriguing subclass of bottlebrush copolymers with random or alternating sequences of A and B side chains. We find that a broader variety of ordered mesophases can be stabilized in the melts of these copolymers relative to the more extensively studied bottlebrush block copolymers. In particular, we observe that these statistical copolymers can stabilize sphere phases over a larger range of species volume fractions than their diblock and tetrablock counterparts but require much higher segregation strength to achieve this. The sphere and hexagonally packed cylinder phases formed by conformationally symmetric statistical bottlebrush copolymers possess interesting discrete core–shell structures with the backbone and lower volume fraction side-chain species forming shells and cores, respectively. Moreover, we uncover a new strategy of stabilizing the Frank–Kasper phase A15 by introducing conformational asymmetry through different side-chain lengths and also observe deflection of order–order phase boundaries and significant mixing between the backbones and short side chains as conformational asymmetry is introduced.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Predicting Fracture Network Development in Crystalline Rocks

The geometric properties of fractures influence whether they propagate, arrest, or coalesce with other fractures. Thus, quantifying the relationship between fracture network characteristics may help predict fracture network development, and perhaps precursors to catastrophic failure. To constrain the relationship and predictability of fracture characteristics, we deform eight one centimeter tall rock cores under triaxial compression while acquiring in situ X-ray tomograms. The tomograms reveal precise measurements of the fracture network characteristics above the spatial resolution of 6.5 µm. We develop machine learning models to predict the value of each characteristic using the other characteristics, and excluding the macroscopic stress or strain imposed on the rock. The models predict fracture development more accurately in the experiments performed on granite and monzonite, than the experiments on marble. Fracture network development may be more predictable in these igneous rocks because their microstructure is more mechanically homogeneous than the marble, producing more systematic fracture development that is not strongly impeded by grain contacts and cleavage planes. The varying performance of the models suggest that fracture volume, length, and aperture are the most predictable of the characteristics, while fracture orientation is the least predictable. Orientation does not correlate with length, as suggested by the idea that the orientation evolves with increasing differential stress and thus fracture length. This difference between the observed and expected relationship between orientation and length highlights the influence of mechanical heterogeneities and local stress perturbations on fracture growth as fractures propagate, link, and coalesce.

58 GEOSCIENCES↗
DOE OSTI2022

Effect of magnetic geometry on the energy partition between ions and electrons in the scrape-off layer of magnetic fusion devices

A universal energy partition mechanism between ions and electrons has been confirmed to exist in the scrape-off layer of both the WEST tokamak and the W7-X stellarator. A peaked plasma density structure induced by an infinite magnetic connection length structure is observed to destroy this dependence and enhance the local ion and electron temperature ratio in the stellarator. Here, a theoretical analysis reveals that the ratio of ion and electron parallel heat conduction is predominant in determining this universality, while electrons would further be cooled in the density-peaked region.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Decahedra and Icosahedra Everywhere: The Anomalous Crystallization of Au and Other Metals at the Nanoscale

Throughout history, objects with fivefold symmetry have been a popular topic of interest for artists, philosophers, and scientists. This may be because fivefold symmetry is very conspicuous in nature. In the case of crystals, fivefold rotational symmetry is mathematically forbidden, and macroscopic crystals exhibiting fivefold symmetry have never been shown to exist. Nevertheless, in the nanoworld, nanoparticles are often found with decahedral and icosahedral shapes that have an overall pseudo–fivefold symmetry. These structures are observed at many length scales, from 1 nm up to 1 µm. In this review, several reasons for the stability of fivefold nanoparticles are discussed. Finally, these include the formation of twin boundaries, surface reconstruction faceting, and other factors.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Review of low salinity waterflooding in carbonate rocks: mechanisms, investigation techniques, and future directions

This review analyses the fundamental thermodynamic theory of the crude oil-brine-rock (COBR) interface and the underlying rock-brine and oil-brine interactions. Next, the available data are reviewed to outline potential mechanisms responsible for increased oil recovery from low salinity waterflooding (LSWF). We propose an approach to studying LSWF and identify the key missing links that are needed to explain observations at multiple length scales. The synergistic effect of LSWFon other chemical enhanced oil recovery methods such as surfactant, alkaline, nanoparticle and polymer flooding are also outlined. We specifically highlight key uncertainties that must be overcome to fully implement the technique in the field.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Dynamics of PDMS- g -PDMS Bottlebrush Polymers by Broadband Dielectric Spectroscopy

Poly(dimethylsiloxane) (PDMS)-based bottlebrush polymers, PDMS-g-PDMS, have been synthesized by anionic polymerization in combination with a condensation-based grafting reaction. Bottlebrush polymers show intriguing features, e.g., extremely low viscosities. Hereby, studies of their dynamics are rare. Therefore, we focus on the segmental relaxation by broadband dielectric spectroscopy. An increasing cross-sectional radius proportional to the increasing side chain length has been observed by small-angle neutron scattering over three samples. Here, a comparison of the segmental relaxation times of the bottlebrushes with the respective linear chains reveals slower dynamics in the former. For longer chains, this effect vanishes.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A North Atlantic synthetic tropical cyclone track, intensity, and rainfall dataset

Tropical Cyclones (TCs) cause significant socio-economic damages to the US and Caribbean coastal regions annually, making it important to understand TC risk at the local-to-regional scales. However, the short length of the observed record and the substantial computational expense associated with high-resolution climate models make it difficult to assess TC risk using either approach. To overcome these challenges, we developed a database of synthetic TCs using the Risk Analysis Framework for Tropical Cyclones (RAFT). The database includes 40,000 synthetic TC tracks, along-track intensities and storm-induced precipitation. TC tracks generated in RAFT are in reasonable agreement with the observed spatial distribution of TC tracks and basin-scale TC statistics. Specifically, along the coast, spatial variations in TC crossing probability and extreme winds upon landfall are well-reproduced by RAFT with R-squared values of 0.81 and 0.73, respectively. In summary, the synthetic TC database constructed with RAFT provides a reasonable pathway for the robust assessment of North Atlantic TC wind and rainfall risks.

54 ENVIRONMENTAL SCIENCES↗