Search NASA⌕ Search

SEARCH · Search NASA

Results for “Overflow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Drag Prediction for the DLR-F6 Wing/Body and DPW Wing using CFL3D and OVERFLOW Overset Mesh

A series of overset grids was generated in response to the 3rd AIAA CFD Drag Prediction Workshop (DPW-III) which preceded the 25th Applied Aerodynamics Conference in June 2006. DPW-III focused on accurate drag prediction for wing/body and wing-alone configurations. The grid series built for each configuration consists of a coarse, medium, fine, and extra-fine mesh. The medium mesh is first constructed using the current state of best practices for overset grid generation. The medium mesh is then coarsened and enhanced by applying a factor of 1.5 to each (I,J,K) dimension. The resulting set of parametrically equivalent grids increase in size by a factor of roughly 3.5 from one level to the next denser level. CFD simulations were performed on the overset grids using two different RANS flow solvers: CFL3D and OVERFLOW. The results were post-processed using Richardson extrapolation to approximate grid converged values of lift, drag, pitching moment, and angle-of-attack at the design condition. This technique appears to work well if the solution does not contain large regions of separated flow (similar to that seen n the DLR-F6 results) and appropriate grid densities are selected. The extra-fine grid data helped to establish asymptotic grid convergence for both the OVERFLOW FX2B wing/body results and the OVERFLOW DPW-W1/W2 wing-alone results. More CFL3D data is needed to establish grid convergence trends. The medium grid was utilized beyond the grid convergence study by running each configuration at several angles-of-attack so drag polars and lift/pitching moment curves could be evaluated. The alpha sweep results are used to compare data across configurations as well as across flow solvers. With the exception of the wing/body drag polar, the two codes compare well qualitatively showing consistent incremental trends and similar wing pressure comparisons.

Sclanfani, Anthony J.↗

Drag Prediction for the NASA CRM Wing-Body-Tail Using CFL3D and OVERFLOW on an Overset Mesh

In response to the fourth AIAA CFD Drag Prediction Workshop (DPW-IV), the NASA Common Research Model (CRM) wing-body and wing-body-tail configurations are analyzed using the Reynolds-averaged Navier-Stokes (RANS) flow solvers CFL3D and OVERFLOW. Two families of structured, overset grids are built for DPW-IV. Grid Family 1 (GF1) consists of a coarse (7.2 million), medium (16.9 million), fine (56.5 million), and extra-fine (189.4 million) mesh. Grid Family 2 (GF2) is an extension of the first and includes a superfine (714.2 million) and an ultra-fine (2.4 billion) mesh. The medium grid anchors both families with an established build process for accurate cruise drag prediction studies. This base mesh is coarsened and enhanced to form a set of parametrically equivalent grids that increase in size by a factor of roughly 3.4 from one level to the next denser level. Both CFL3D and OVERFLOW are run on GF1 using a consistent numerical approach. Additional OVERFLOW runs are made to study effects of differencing scheme and turbulence model on GF1 and to obtain results for GF2. All CFD results are post-processed using Richardson extrapolation, and approximate grid-converged values of drag are compared. The medium grid is also used to compute a trimmed drag polar for both codes.

Sclafani, Anthony J.↗

Implementation and Assessment of Menter’s Galilean-Invariant γ Transition Model in OVERFLOW

With an increased emphasis on greener air transports and sustainable aviation, the modeling of laminar-to-turbulent boundary layer transition is anticipated to have an added significance, particularly in the applications related to laminar flow technology. However, unmanned aerial vehicles, crewed reentry vehicles, and ground-to-flight extrapolation all benefit from transition models. Because no single transition model is ideal for the complete spectrum of applications, it is useful to incorporate a variety of models in general-purpose CFD solvers, such as the NASA OVERFLOW Overset CFD code. While the Langtry-Menter 𝛄 − 𝑹𝒆 𝛉𝒕 model, currently available in OVERFLOW, has been widely used for CFD predictions of flows with laminar, transitional, and turbulent boundary layers, it does not possess the Galilean invariance property, a desirable attribute for rotorcraft applications. To help overcome that limitation, we have recently implemented Menter's baseline version of the SST-based γ transition model, along with a Galilean invariant stationary crossflow extension within OVERFLOW (version 2.3e). An initial assessment of the newly implemented model has been carried out using 2D benchmark cases including flat plates and the NLF-0416 airfoil, addressing several transition scenarios ranging from bypass transition due to freestream turbulence, natural transition via Tollmien-Schlichting instabilities, and transition due to a laminar separation bubble. The crossflow extension has been applied to the infinite swept NLF(2)-0415 wing and the 6:1 prolate spheroid. Wherever possible, the results were obtained on a sequence of meshes to ascertain the grid convergence behavior, which has been evaluated through global metrics such as force coefficients as well as local values of the skin-friction coefficient at selected points near and within the transition region. Overall, the model appears to be correctly implemented and the results show promise for further development using the framework of the γ transition model.

CFD modeling↗

GPU Implementation of the OVERFLOW CFD Code

The high-performance computing (HPC) landscape is quickly changing to systems where most of the performance comes from specialized chips, specifically graphics processing units (GPUs). Such GPU systems are throughput machines, where efficient use of the GPU often requires code refactoring to expose a few orders of magnitude more fine grain parallelism than was previously used on the CPU. Recent modifications to OVERFLOW, an overset, structured grid, computational fluid dynamics flow solver, written in Fortran will be presented. These modifications include both code modernization efforts and algorithmic changes to enable OVERFLOW to efficiently utilize GPUs. Many of these algorithmic changes would likely also be applicable for other structured grid, stencil-based codes wanting to utilize GPUs. The capabilities that have been ported to run on the GPUs are presented, along with the performance gains of the GPU version relative the CPU version of OVERFLOW.

GPU Programming↗

GPU Implementation of the OVERFLOW CFD Code

The high-performance computing (HPC) landscape is quickly changing to systems where most of the performance comes from specialized chips, specifically graphics processing units (GPUs). Such GPU systems are throughput machines, where efficient use of the GPU often requires code refactoring to expose a few orders of magnitude more fine grain parallelism than was previously used on the CPU. Recent modifications to OVERFLOW, an overset, structured grid, computational fluid dynamics flow solver, written in Fortran will be presented. These modifications include both code modernization efforts and algorithmic changes to enable OVERFLOW to efficiently utilize GPUs. Many of these algorithmic changes would likely also be applicable for other structured grid, stencil-based codes wanting to utilize GPUs. The capabilities that have been ported to run on the GPUs are presented, along with the performance gains of the GPU version relative the CPU version of OVERFLOW.

GPU Programming↗

Strategies for the GPU Implementation of the OVERFLOW CFD Code

Wondering how to port a large, computational fluid dynamics (CFD) solver, written in Fortran, to run effectively on GPUs? Join this talk to learn about the strategies NASA’s OVERFLOW CFD code has used to effectively utilize GPUs to greatly improve the time to solution compared to CPUs. OVERFLOW is an overset, structured grid, computational fluid dynamics (CFD) flow solver developed by NASA and widely used by government, US industry, and academia. It is known for its effective use of CPU hardware, but this talk will discuss recent efforts to modify the code to run efficiently on GPUs. We will describe our use of OpenACC, CUDA Fortran, and CUDA C++, discussing why and how we use each to map our problem onto NVIDIA GPUs. We will also describe structural changes we made in the code to expose enough parallelism to effectively use the GPU hardware. Finally, we will present the performance benefits from running OVERFLOW on GPUs compared to the well optimized CPU version of the code.

GPU Programming↗

High-Lift OVERFLOW Analysis of the DLR-F11 Wind Tunnel Model

In response to the 2nd AIAA CFD High Lift Prediction Workshop, the DLR-F11 wind tunnel model is analyzed using the Reynolds-averaged Navier-Stokes flow solver OVERFLOW. A series of overset grids for a bracket-off landing configuration is constructed and analyzed as part of a general grid refinement study. This high Reynolds number (15.1 million) analysis is done at multiple angles-of-attack to evaluate grid resolution effects at operational lift levels as well as near stall. A quadratic constitutive relation recently added to OVERFLOW for improved solution accuracy is utilized for side-of-body separation issues at low angles-of-attack and outboard wing separation at stall angles. The outboard wing separation occurs when the slat brackets are added to the landing configuration and is a source of discrepancy between the predictions and experimental data. A detailed flow field analysis is performed at low Reynolds number (1.35 million) after pressure tube bundles are added to the bracket-on medium grid system with the intent of better understanding bracket/bundle wake interaction with the wing's boundary layer. Localized grid refinement behind each slat bracket and pressure tube bundle coupled with a time accurate analysis are exercised in an attempt to improve stall prediction capability. The results are inconclusive and suggest the simulation is missing a key element such as boundary layer transition. The computed lift curve is under-predicted through the linear range and over-predicted near stall, and the solution from the most complete configuration analyzed shows outboard wing separation occurring behind slat bracket 6 where the experiment shows it behind bracket 5. These results are consistent with most other participants of this workshop.

High-lift↗

Implementation of a Body Force Model in OVERFLOW for Propulsor Simulations

We present an implementation of a propulsor model based on body force method into the OVERFLOW computational fluid dynamics code to model turbofan engines and propulsors of similar type. The model estimates the forces imparted on the fluid by the blade camber surfaces as a body force source terms in the momentum and energy equations over grids that represent the rotor and stator of a fan stage. We tested the implementation on three cases: 1) Source Diagnostics Test (SDT) fan with R4 rotors, which has extensive test data on aerodynamic performance and rotor wake surveys, 2) A stand-alone Aeronaut TF8000 propulsor which is an off-the-shelf propulsor used on model aircraft and 3) The D8 aircraft model with TF8000 propulsors placed in a wind tunnel. Despite missing some of the features in the velocity profiles near the endwalls (i.e. hub and casing surfaces), the OVERFLOW simulations with body force model predicted area-averaged flow speed and total pressure rise through the SDT propulsor within a few percent of the LDV (Laser Doppler Velocimetry) measurements. In the case of TF8000 propulsor on the D8 airframe, the model under-predicted mechanical power coefficient by several percent of the wind tunnel test results when the horizontal force balance condition over the airframe is targeted by tuning rotor speed. By investigating the upstream influence of the rotor swirl, it was found out that the induced swirl velocity effects upstream were relatively small and they rapidly vanished before reaching one fan diameter upstream of the fan face. The body force model provided insights on aerothermodynamics and aeromechanics of boundary layer ingesting propulsor; these insights could not be obtained by using the uniform pressure jump model.

Propulsor↗

OVERFLOW Contribution to HiLiftPW-3

We plan to perform the following sets of computations: For all our contributions (except where stated) Code: OVERFLOW, Turbulence model: SAnegRCQCR2000. - 1. Results will be submitted for both the full chord flap gap (Case 1a) and partially-sealed Chord Flap gap (Case 1c): 1. Grid Refinement Study; 2. Grids: structured overset grids supplied by HiLiftPW committee; 3. Connectivity: Domain Connectivity Framework, DCF. - 2. Results will be submitted for JAXA Standard Model and Nacelle/Pylon Off (Case 2a), Nacelle/Pylon On (Case 2c): 1. Alpha Study; 2. Grids: structured overset grids supplied by HiLiftPW committee; 3. Connectivity: Pegasus 5 (Peg5). - 3. A study of the effects of different connectivity paradigms: 1. DCF vs Peg5 for HLCRM cases; 2. DCF vs. C3P (NASA Ames) vs. Peg5 for JSM cases; 3. JSM grids will be the focus where we will hopefully see some type of trends with reference to wind tunnel data. - 4. Adaption cases will be attempted for (and submitted where appropriate): 1. Cases 1c,1d: HLCRM; 2. Cases 2c and 2d: JSM; 3. Grid: Near Body grids provided by committee, OffBody grids Cartesian; 4. AMR NearBody and OffBody Adaption. - 5. Case 3 Turbulence model verification study: 1. Grid: Series of 3 finest grids as defined on http://turbmodels.larc.nasa.gov/airfoilwakeverif.html; 2. Turbulence models: SAneg and SAneg— RCQCR2000. OVERFLOW 2.2 is a Reynolds-averaged Navier-Stokes (RANS) code developed by NASA...

OVERFLOW↗

OVERFLOW Analysis of Supersonic Retropropulsion Testing on a Blunt Mars Entry Vehicle Concept

Supersonic Retropropulsion (SRP) flow over a Hypersonic Inflatable Aerodynamic Decelerator (HIAD) blunt-body vehicle was simulated using the OVERFLOW Computational Fluid Dynamics (CFD) solver. Two nozzle configurations were tested (1E and 1F) as a subset of the seven total configurations in the Descent Systems Study (DSS) testing campaign. A generalized, Adaptive Mesh Refinement (AMR) shock capturing and plume refinement technique was developed and calibrated for producing automatic and optimized grid systems unique to any given testing condition. Simulations were subjected to successive levels of grid refinement in order to determine solution independence from grid resolution. OVERFLOW Reynolds Averaged Navier-Stokes (RANS) solutions produced realistic SRP flow phenomena, including Mach disk normal shocks contained in high-thrust plumes and bow shock triple-points. Solutions for the 1E nozzle configuration were steady. Conversely, a subset of the 1F test conditions were unsteady and exhibited periodic, non-sinsoidal expansions and contractions of the streamwise-oriented plume, resulting in unsteady aerodynamic loads on the vehicle.

Supersonic Retropropulsion↗

OVERFLOW Analysis of Supersonic Retropropulsion Testing on a Blunt Mars Entry Vehicle Concept

Supersonic retropropulsion (SRP) flow over a Hypersonic Inflatable Aerodynamic Decelerator (HIAD) blunt-body vehicle was simulated using the Overflow Computational Fluid Dynamics (CFD) solver. Two nozzle configurations were tested (1E and 1F) as a subset of the seven total configurations in the Descent System Study (DSS) testing campaign. A generalized, Adaptive Mesh Refinement (AMR) shock capturing and plume refinement technique was developed and calibrated for producing automatic and unique grid systems optimized for any given testing condition. Solution independence from grid resolution was determined by successively increasing grid refinement until asymptotic convergence of the mean aerodynamic loads was observed. Overflow Reynolds-averaged Navier-Stokes (RANS) solutions produced realistic SRP flow phenomena, including Mach disk normal shocks contained in high-thrust plumes and bow shock triple-points. Solutions for the 1E nozzle configuration were steady. Conversely, a subset of the 1F test conditions were unsteady and exhibited periodic, non-sinusoidal expansions and contractions of the streamwise-oriented plume, resulting in unsteady aerodynamic loads on the vehicle. Initial investigations into the effect of turbulence modeling fidelity demonstrated significant differences between the aerodynamic loads simulated with RANS and Detached Eddy Simulation (DES). Multiple flow mechanisms were identified as root causes of these differences, including bow shock shape augmentation and reduced entrainment due to reduced turbulence in the DES simulations. Initial comparisons of pitching moment control authority and aerodynamic drag performance between the tested nozzle configurations demonstrated that the 1E configuration may be more advantageous for the Mars Entry, Descent, and Landing (EDL) task.

Supersonic Retropropulsion↗

OVERFLOW Analysis of Supersonic Retropropulsion Testing on a Blunt Mars Entry Vehicle Concept

Supersonic retropropulsion (SRP) flow over a Hypersonic Inflatable Aerodynamic Decelerator (HIAD) blunt-body vehicle was simulated using the Overflow Computational Fluid Dynamics (CFD) solver. Two nozzle configurations were tested (1E and 1F) as a subset of the seven total configurations in the Descent System Study (DSS) testing campaign. A generalized, Adaptive Mesh Refinement (AMR) shock capturing and plume refinement technique was developed and calibrated for producing automatic and unique grid systems optimized for any given testing condition. Solution independence from grid resolution was determined by successively increasing grid refinement until asymptotic convergence of the mean aerodynamic loads was observed. Overflow Reynolds-averaged Navier-Stokes (RANS) solutions produced realistic SRP flow phenomena, including Mach disk normal shocks contained in high-thrust plumes and bow shock triple-points. Solutions for the 1E nozzle configuration were steady. Conversely, a subset of the 1F test conditions were unsteady and exhibited periodic, non-sinusoidal expansions and contractions of the streamwise-oriented plume, resulting in unsteady aerodynamic loads on the vehicle. Initial investigations into the effect of turbulence modeling fidelity demonstrated significant differences between the aerodynamic loads simulated with RANS and Detached Eddy Simulation (DES). Multiple flow mechanisms were identified as root causes of these differences, including bow shock shape augmentation and reduced entrainment due to reduced turbulence in the DES simulations. Initial comparisons of pitching moment control authority and aerodynamic drag performance between the tested nozzle configurations demonstrated that the 1E configuration may be more advantageous for the Mars Entry, Descent, and Landing (EDL) task.

Supersonic Retropropulsion↗

OVERFLOW Guidelines for Simulation of Supersonic Retropropulsion

General methods for obtaining satisfactory simulation accuracy across a range of supersonic retropropulsive flows are recommended using comparisons between OVERFLOW calculations and tests of two vehicles in the Langley Unitary Plan Wind Tunnel. Gridding and discretization, various measures of solution convergence, and turbulence modelling options are dicussed. While the presented guidelines were developed from OVERFLOW simulations in support of a particular test, the recommendations on numerical methods and gridding practices hold merit for simulations conducted CFD solvers in general.

CFD↗

Comparison of OVERFLOW Computational and Experimental Results of the CobraMRV Mars Entry Vehicle Concept during Supersonic Retropropulsion

The CFD solver Overflow was used to simulate the CobraMRV undergoing supersonic retropropulsion (SRP) in the Langley Unitary Plan Wind Tunnel as part of a CFD and wind tunnel integration effort. Selection of numerical methods and resulting comparisons to selected tunnel conditions of interest are detailed. Comparisons of mean pressures with static taps and pressure-sensitive paint are provided for multiple SST-based turbulence models. URANS predicitons of heat shield pressures at high thrust conditions are poor compared to TMRC and DES predictions. Comparisons to experimental measurements of pressure fluctuations indicate complex relationships between heat shield unsteadiness, flight Mach number, and engine thrust coefficient. Bow shock topology and shock cell structure between experimental and OVERFLOW data show good agreement in Schlieren imaging. Recommendations for future investigation into flow field unsteadiness and turbulence models are suggested.

CFD↗

Investigating overflow metabolism in heterotrophic cultures of the green alga Chromochloris zofingiensis

Chromochloris zofingiensis is of interest for its ability to perform a reversible trophic switch in the presence of glucose that is characterized by a shutdown of photosynthesis and an accumulation of energy storage metabolites. Previous work has shown that this trophic switch is accompanied by overflow metabolism and the production of lactate in aerobic conditions. This trophic switch is not observed in nutrient replete media. We utilized isotopically assisted metabolic flux analysis to characterize intracellular flux distributions that are associated with different metabolic phenotypes observed in this organism in different media formulations in light and dark conditions. The results of this analysis showed that low iron cultures have no flux through carbon fixation reactions, and that the carbon flux entering the TCA cycle in these cultures is approximately 40 % lower than that in iron replete cultures grown heterotrophically. This analysis was complemented with transcriptomics data collected for C. zofingiensis grown in iron limited conditions to provide further evidence towards the negative impact of iron limitation on both photosynthetic and respiratory activity. Overflow metabolism allows this alga to compensate for the lower energy production that results from iron limitation. This work highlights how nutrient availability can lead to changes in the metabolism of C. zofingiensis.

59 BASIC BIOLOGICAL SCIENCES↗

Influence of carrier overflow on the forward-voltage characteristics of InGaN-based light-emitting diodes

We investigate the influence of carrier overflow on the forward-voltage characteristics of the InGaN-based blue light-emitting-diode (LED) by comparing the temperature-dependent characteristics of the electroluminescence (EL) efficiency, the EL spectra, and the current-voltage relation over a wide range of temperature (50–300 K). Based on these experimental results, we demonstrate that the simple ohmic potential drop in the Shockley diode equation is not sufficient to explain the experimental data when the severe carrier overflow to the p-(Al)GaN layer induces the efficiency droop in the LED device. The anomalous relation between current and voltage at cryogenic temperatures is explained by the space-charge-limited current formed by the overflown electrons, rather than by the increase of a constant series resistance in the p-(Al)GaN layer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Overflow sensor for cryogenic-fluid vessels

Overflow sensor for cryogenic fluid vessels has been designed by winding electrical resistance element on porous tubular coil form. Form is positioned in overflow vent of cryogenic fluid vessel where it can differentiate vapor from liquid at same temperature.

Tener, W. M.↗

Disk-overflow accretion in GK Persei?

We reanalyze the 1983 European X-ray Observatory Satellite (EXOSAT) observations of GK Per during an outburst to investigate the approximately 5000 s quasiperiodic modulation. We find that the spectral behavior is reminiscent of dipping low-mass X-ray binaries and note that the time scale is characteristic of the radius where an accretion stream overflowing the disk would collide back onto the disk. We suggest that structure caused by such disk-overflow accretion was periodically obscuring the white dwarf, producing the modulation.

Hellier, Coel↗