Search NASA⌕ Search

SEARCH · Search NASA

Results for “PARACHUTE FABRIC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Lightweight Broadcloth Recovery Parachute Testing and Reconstruction

Early in the Orion CPAS (Capsule Parachute Assembly System) project a main parachute was fabricated with lighter weight broadcloth in the lower part of the parachute skirt in order to look into different options for reducing the mass of the CPAS. At the end of Orion CPAS airdrop testing this parachute was used as a test equipment recovery parachute in order to gather data on the performance of this parachute. The parachute was the single recovery parachute in order to achieve the proper load under the parachute. It was flown on the final CPAS qualification test CQT 4-8 in September 2018.This paper will include imagery analysis, performance analysis based on all the gathered data, a full description of the configuration of the recovery parachute, as well as a comparison between this parachute and other CPAS recovery parachutes and other CPAS Main parachutes.

Ray, Eric S.↗
NASA NTRS2009

2008 Accomplishments for CEV Parachute Assembly System (CPAS)

The Crew Exploration Vehicle (CEV) Parachute Assembly System (CPAS) project is responsible for the design, development, fabrication, qualification and delivery of the CEV parachute system to support the Orion pad/ascent flight tests and the first three orbital flight tests (including the first human mission). This article will discuss the technical and research achievements accomplished in calendar year 2008, broken into three key categories: prototype testing and analysis (also referred to as the Generation 1 design), system requirements definition and design of the flight engineering development unit, and support for the Orion vehicle flight testing (primarily Pad-Abort 1).

Martin, Ricardo↗
NASA NTRS1968

Performance of a 16.6 Meter Diameter Cross Parachute in a Simulated Martian Environment

Inflation and drag characteristics of a 54.4-foot (16.6 meter) nominal-diameter cross parachute, deployed at a Mach number of 1.65 and a dynamic pressure of 12.68 lb/sq f t (607.1 N/m(exp2)), were obtained from the fourth balloon-launched flight test of the Planetary Entry Parachute Program (PEPP). After deployment, the parachute quickly inflated to a full condition, partially collapsed, and then gradually reinflated while undergoing rapid oscillations between over-inflation and under-inflation. The oscillations began while the parachute was still at supersonic speeds and continued to low subsonic speeds well below an altitude of 90,000 feet (27.4 km). These canopy instabilities produced large cyclic variations in the parachute's drag coefficient. The average value of drag coefficient was about 0.8 to 0.9 at subsonic speeds and slightly lower at supersonic speeds. These drag coefficient values were based on the actual fabric surface area of the parachute canopy. The parachute sustained minor damage consisting of two canopy tears and abrasions and tears on the riser line. It is believed that this damage did not produce a significant change in the performance of the parachute.

Lundstrom, Reginald R.↗
NASA NTRS2021

Micromechanics Modeling of Textiles for Re-Entry Parachute Applications

Recent flight test projects and NASA missions have highlighted the challenges associated with accurately and efficiently modeling the behavior of parachute deployment systems needed for parachute design. Moreover, parachute deployment has been identified as one of the higher risk components for such missions. The analysis of textile fabrics used for atmospheric entry is inherently complex due to the multiple scales present in the fabric structure, including individual fiber filaments at the microscale, yarn bundles of fibers at the mesoscale, and the overall woven fabric at the macroscale. Computational tools for simulating fabric behavior must be able to account for the different mechanisms present at each scale without sacrificing computational efficiency. This work examines the generalized multiscale method of cells micromechanics theory, which has previously been used for the analysis of reinforced composite structures, to unreinforced textile fabrics. Modifications to the existing composite multiscale framework, implemented in NASA’s Multiscale Analysis Tool (NASMAT), include the specific mechanics unique to unreinforced textile fabrics, and overcoming the assumptions of a fixed fiber angle. It looks to assess the feasibility of using the NASMAT tool for efficient prediction of the response of unreinforced fabrics to loading such that it can ultimately be applied to fluid structure interaction tools for the prediction of parachute deployment systems. In this work, fabric behavior is simulated in NASMAT through homogenization of a triply periodic repeating unit cell, where the geometry of the subcells can change as a function of loading to represent the relative rotation and uncrimping that can occur in fabric tows. Predictions from the amended NASMAT code are compared to experimental data for uniaxial and off-axis tension to verify the ability of the code to incorporate lower-scale mechanics in prediction of unreinforced fabrics under loading.

Micromechanics↗
NASA NTRS2007

Low Velocity Airdrop Tests of an X-38 Backup Parachute Design

The NASA Johnson Space Center's X-38 program designed a new backup parachute system to recover the 25,000 lb X-38 prototype for the Crew Return Vehicle spacecraft. Due to weight and cost constraints, the main backup parachute design incorporated rapid and low cost fabrication techniques using off-the-shelf materials. Near the vent, the canopy was constructed of continuous ribbons, to provide more damage tolerance. The remainder of the canopy was a constructed with a continuous ringslot design. After cancellation of the X-38 program, the parachute design was resized, built, and drop tested for Natick Soldiers Center's Low Velocity Air Drop (LVAD) program to deliver cargo loads up to 22,000 lbs from altitudes as low as 500 feet above the ground. Drop tests results showed that the 500-foot LVAD parachute deployment conditions cause severe skirt inversion and inflation problems for large parachutes. The bag strip occurred at a high angle of attack, causing skirt inversion before the parachute could inflate. The addition of a short reefing line prevented the skirt inversion. Using a lower porosity in the vent area, than is normally used in large parachutes, improved inflation. The drop testing demonstrated that the parachute design could be refined to meet the requirements for the 500-foot LVAD mission.

Stein, Jenny M.↗
NASA NTRS1974

Scale drogue parachute model

Drogue parachute models, pilot parachute models, and their deployment bags were fabricated incorporating recommended design changes. These changes are described in detail.

Source record↗
NASA NTRS1985

Silicone-Rubber Stitching Seal

Fabric products protected from raveling by coating threads and filling stitching holes with silicone rubber. Uncored silicone rubber applied to stitching lines with air-pressurized sealant gun. Next, plastic release film placed on coated side, and blanket flipped over so release film lies underneath. Blanket then bagged and adhesive cured under partial vacuum of about 3.5 psi or under pressure. Applications include balloons, parachutes, ultralight aircraft, sails, rescue harnesses, tents, or other fabric products highly stressed in use.

Wang, D. S.↗
NASA NTRS1973

Development flight tests of the Viking decelerator system.

Significant aspects of a low altitude flight test phase of the overall Viking decelerator system development are given. This test series included nine aircraft drop tests that were conducted at the Joint Parachute Test Facility, El Centro, California, between September 1971 and May 1972. The test technique and analytical planning method utilized to best simulate loading conditions in a low density environment are presented and some test results are shown to assess their adequacy. Performance effects relating to suspension line lengths of 1.7 D sub o with different canopy loadings are noted. System hardware developments are described, in particular the utilization of a fabric deployment mortar cover which remained attached to the parachute canopy. Finally, the contribution of this test series to the overall program is assessed.

Murrow, H. N.↗
NASA NTRS2007

Overview of the Mars Science Laboratory Parachute Decelerator Subsystem

In 2010 the Mars Science Laboratory (MSL) mission will deliver NASA's largest and most capable rover to the surface of Mars. MSL will explore previously unattainable landing sites due to the implementation of a high precision Entry, Descent, and Landing (EDL) system. The parachute decelerator subsystem (PDS) is an integral prat of the EDL system, providing a mass and volume efficient some of aerodynamic drag to decelerate the entry vehicle from Mach 2 to subsonic speeds prior to final propulsive descent to the sutface. The PDS for MSL is a mortar deployed 19.7m Viking type Disk-Gap-Band (DGB) parachute; chosen to meet the EDL timeline requirements and to utilize the heritage parachute systems from Viking, Mars Pathfinder, Mars Exploration Rover, and Phoenix NASA Mars Lander Programs. The preliminary design of the parachute soft goods including materials selection, stress analysis, fabrication approach, and development testing will be discussed. The preliminary design of mortar deployment system including mortar system sizing and performance predictions, gas generator design, and development mortar testing will also be presented.

Entry, Descent, and Landing (EDL)↗
NASA NTRS2009

Supersonic Testing of 0.8 m Disk Gap Band Parachutes in the Wake of a 70 Deg Sphere Cone Entry Vehicle

Supersonic wind tunnel testing of Viking-type 0.8 m Disk-Gap-Band (DGB) parachutes was conducted in the NASA Glenn Research Center 10'x10' wind-tunnel. The tests were conducted in support of the Mars Science Laboratory Parachute Decelerator System development and qualification program. The aerodynamic coupling of the entry-vehicle wake to parachute flow-field is under investigation to determine the cause and functional dependence of a supersonic canopy breathing phenomenon referred to as area oscillations, characteristic of DGB's above Mach 1.5 operation. Four percent of full-scale parachutes (0.8 m) were constructed similar to the flight-article in material and construction techniques. The parachutes were attached to a 70-deg sphere-cone entry-vehicle to simulate the Mars flight configuration. The parachutes were tested in the wind-tunnel from Mach 2 to 2.5 in a Reynolds number range of 2x105 to 1x106, representative of a Mars deployment. Three different test configurations were investigated. In the first two configurations, the parachutes were constrained horizontally through the vent region to measure canopy breathing and wake interaction for fixed trim angles of 0 and 10 degrees from the free-stream. In the third configuration the parachute was unconstrained, permitted to trim and cone, similar to free-flight (but capsule motion is constrained), varying its alignment relative to the entry-vehicle wake. Non-intrusive test diagnostics were chosen to quantify parachute performance and provide insight into the flow field structure. An in-line loadcell provided measurement of unsteady and mean drag. Shadowgraph of the upstream parachute flow field was used to capture bow-shock motion and wake coupling. Particle image velocimetry provided first and second order flow field statistics over a planar region of the flow field, just upstream of the parachute. A photogrammetric technique was used to quantify fabric motion using multiple high speed video cameras to record the location in time and space of reflective targets placed on the canopy interior. The experimental findings including an updated drag model and the physical basis of the area oscillation phenomenon will be discussed.

EDL↗
NASA NTRS2022

Predicting Unreinforced Fabric Mechanical Behavior with Recurrent Neural Networks

Unreinforced woven fabrics are widely employed in various high-performance applications, including parachute deployment systems, airbags, and ballistic armor. The analysis of such materials is inherently complex due to the multiscale structure of these materials, and the dependence of macroscale behavior on changes that occur at lower scales. Previously, NASA’s Multiscale Analysis Tool (NASMAT) showed its capability in predicting unreinforced fabric behavior at the macroscale by capturing finite rotations that occur at the mesoscale. Though effective, the tool can face high computational cost for large, complex problems, motivating the need for the development of a surrogate model that can capture the same behavior. A recurrent neural network (RNN) was developed and trained on virtual NASMAT data to mimic the physics-based solutions while improving the computational runtime. The architecture of the RNN to best simulate the fabric behavior was carefully crafted based on heuristic knowledge of predicting physics-based temporal data, manual hyperparameter case studies, and Hyperband optimization.. The resultant model was able to predict a variety of stress-strain curves for fabrics with different mesoscale geometries, and was further validated by comparing to experimental data for the K706 style Kevlar plain-weave fabric, demonstrating the ability of the model to effectively capture the geometric changes in the fabric without explicitly calculating them, as is done in NASMAT. Furthermore, the tool showed its ability to improve on the runtime by a factor of 10 for fabric solutions compared to the multiscale tool, which would further enable the simulation of complex loading scenarios on unreinforced fabrics.

Fabric↗
NASA NTRS2011

Silicone nanocomposite coatings for fabrics

A silicone based coating for fabrics utilizing dual nanocomposite fillers providing enhanced mechanical and thermal properties to the silicone base. The first filler includes nanoclusters of polydimethylsiloxane (PDMS) and a metal oxide and a second filler of exfoliated clay nanoparticles. The coating is particularly suitable for inflatable fabrics used in several space, military, and consumer applications, including airbags, parachutes, rafts, boat sails, and inflatable shelters.

Eberts, Kenneth↗