SEARCH · Search NASA
Results for “PEG”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Ion and Water Dynamics in the Transition from Dry to Wet Conditions in Salt-Doped PEG
The influence of the water content on ion and water transport mechanisms in polymer membranes under low to moderate hydration conditions remains poorly understood. In this study, we combine ion and water diffusivity (PFG-NMR) measurements with atomistic molecular dynamics simulations to better understand transport processes in hydrated salt-doped poly(ethylene glycol). Above the water percolation threshold, the experimental and simulated diffusivities are in good agreement with the free volume transport models. At low hydration levels, unlike dry systems, ion diffusion cannot be described by polymer segmental dynamics alone. We rationalize such observations by the interplay between ion–water and ion–polymer solvation of cations and between ion–water and cation–anion interactions for anions. Further, we demonstrate that a two-state model combining ion–water solvation and free volume transport can describe water dynamics across the entire hydration range of interest. Here, our findings provide a more encompassing analysis of ion and water transport in hydrated polyelectrolytes, specifically in the low hydration regime.
Evaluation of Binders and Plasticizers in Kollidon VA 64-PEG Binder Systems
The binders, plasticizers, and dispersants in a polyvinylpyrrolidone/polyethylene glycol/glycerin binder system for PZT were evaluated. Kollidon VA 64 was investigated as a possible alternative binder to Kollidon 25 in a PZT powder system. The target amount of PEG300 in a Kollidon VA 64 system was predicted to be 15 to 30 wt.% PEG300 based on T g analysis by DSC. The compaction properties (slide coefficient, cohesiveness, green strength, etc.) were analyzed for Kollidon VA 64 – x PEG300 – glycerin systems. The properties in the range of x = 0 to 20 for systems without glycerin and x = 5 to 20 for systems with glycerin all exceeded the performance of the baseline Kollidon 25 system, of which VA 64 – 10 wt.% PEG300 – 5 wt.% glycerin with adsorbed moisture was the most promising composition due to a compact cohesiveness of 0.84 at 40 kpsi compared to a baseline of 0.44. The effect of dispersants on the compaction properties of a Kollidon 25 – PEG300 binder system was also analyzed, and the compaction properties were also compared to that of a Aquazol 200 – PEG6000 binder system. The powders with dispersant exhibited comparabl e per formance to the baseline, suggesting good compatibility. The compacts produce with the Aquazol 200 – PEG6000 binder exhibited decreased performance when compared to the baseline .
High capacity Li-ion battery anodes: Impact of crystallite size, surface chemistry and PEG-coating
Explore the source record for details and available documents.
Assembly of Building Blocks by Double-End-Anchored Polymers in the Dilute Regime Mediated by Hydrophobic Interactions at Controlled Distances
Hierarchical assembly of building blocks via competing, orthogonal interactions is a hallmark of many of nature’s composite materials that do not require highly specific ligand-receptor interactions. To mimic this assembly mechanism requires the development of building blocks capable of tunable interactions. In the present work, we explored the interplay between repulsive (steric and electrostatic) and attractive hydrophobic forces. The designed building blocks allow hydrophobic forces to effectively act at controlled, large distances, to create and tune the assembly of membrane-based building blocks under dilute conditions and affect their interactions with cellular membranes via physical cross-bridges. Specifically, we employed double-end-anchored poly(ethylene glycol)s (DEA-PEGs)—hydrophilic PEG tethers with hydrophobic tails on both ends. Using differential-interference-contrast optical microscopy, synchrotron small angle X-ray scattering (SAXS), and cryogenic electron microscopy, we investigated the ability of DEA-PEGs to mediate assembly in the dilute regime on multiple length scales and on practical time scales. The PEG length, anchor hydrophobicity, and molar fraction of DEA-PEG molecules within a membrane strongly affect the assembly properties. Additional tuning of the intermembrane interactions can be achieved by adding repulsive interactions via PEG-lipids (steric) or cationic lipids to the DEA-PEG-mediated attractions. Further, while the optical and electron microscope imaging methods provided qualitative evidence of the ability of DEA-PEGs to assemble liposomes, the SAXS measurements and quantitative line-shape analysis in dilute preparations demonstrated that the ensemble average of loosely organized liposomal assemblies maintains DEA-PEG concentration-dependent tethering on defined nanometer length scales. For cationic liposome–DNA nanoparticles (CL–DNA NPs), aggregation induced by DEA-PEGs decreased internalization of NPs by cells, but tuning the DEA-PEG-induced attractions by adding repulsive steric interactions via PEG-lipids limited aggregation and increased NP uptake. However, confocal microscopy imaging together with colocalization studies with Rab11 and LysoTracker as markers of intracellular pathways showed that modifying CL–DNA NPs with DEA-PEGs alters their interactions with the plasma and endosomal membranes.
Polyethylene Glycol Crowder’s Effect on Enzyme Aggregation, Thermal Stability, and Residual Catalytic Activity
Protein stability and performance in various natural and artificial systems incorporating many other macromolecules for therapeutic, diagnostic, sensor, and biotechnological applications attract increasing interest with the expansion of these technologies. Here we address the catalytic activity of lysozyme protein (LYZ) in the presence of a polyethylene glycol (PEG) crowder in a broad range of concentrations and temperatures in aqueous solutions of two different molecular mass PEG samples (Mw = 3350 and 10000 g/mol). The phase behavior of PEG–protein solutions is examined by using dynamic light scattering (DLS) and small-angle X-ray scattering (SAXS), while the enzyme denaturing is monitored by using an activity assay (AS) and circular dichroism (CD) spectroscopy. Molecular dynamic (MD) simulations are used to illustrate the effect of PEG concentration on protein stability at high temperatures. The results demonstrate that LYZ residual activity after 1 h incubation at 80 °C is improved from 15% up to 55% with the addition of PEG. The improvement is attributed to two underlying mechanisms. (i) Primarily, the stabilizing effect is due to the suppression of the enzyme aggregation because of the stronger PEG–protein interactions caused by the increased hydrophobicity of PEG and lysozyme at elevated temperatures. (ii) The MD simulations showed that the addition of PEG to some degree stabilizes the secondary structures of the enzyme by delaying unfolding at elevated temperatures. The more pronounced effect is observed with an increase in PEG concentration. This trend is consistent with CD and AS experimental results, where the thermal stability is strengthened with increasing of PEG concentration and molecular mass. Overall, the results show that the highest stabilizing effect is approached at the critical overlap concentration of PEG.
Two-dimensional assembly of gold nanoparticles grafted with charged-end-group polymers
We introduced charged terminal groups to polymers that graft nanoparticles enable Coulombic control over their assembly by tuning the pH and salinity of their aqueous suspensions. Gold nanoparticles (AuNPs) are grafted with poly (ethylene glycol) (PEG) terminated with CH 3 (charge-neutral), COOH (negatively charged) or NH 2 groups (positively charged), and characterized with dynamic light scattering, ζ-potential, and thermal gravimetric analysis. Liquid surface X-ray reflectivity (XR) and grazing incidence small-angle X-ray scattering (GISAXS) are used to determine the density profile and in-plane structure of the AuNPs assembly at the aqueous surface. Assembly of PEG-AuNPs at the liquid/vapor interface is tunable by adjusting pH or salinity for COOH but less for NH 2 terminals. The distinct assembly behaviors are attributed to the overall charge of PEG-AuNPs as well as PEG conformation. COOH-PEG corona is more compact than those of the other terminal groups, leading to a crystalline structure with a smaller superlattice. The net charge per particle depends not only on the PEG terminal groups but also on the cation sequestration of PEG and the intrinsic negative charge of the AuNP surface. The closeness to overall charge neutrality, and hydrogen bonding in play, brought by NH 2 -PEG, drive NH 2 -PEG-AuNPs to assembly and crystallinity without additives to the suspensions.
Double in-situ lignin modification in surfactant-assisted glycerol organosolv pretreatment of sugarcane bagasse towards efficient enzymatic hydrolysis
Organosolv pretreatment effectively fractionates lignocellulosic biomass for efficient enzymatic hydrolysis, yielding fermentable sugars. However, substantial lignin redeposition on the substrate surface and residual lignin content exacerbate lignin’s inhibitory effects on subsequent enzymatic hydrolysis. Here, an in-situ lignin modification is proposed to address this challenge by incorporating polyethylene glycol (PEG) series into glycerol organosolv (GO) pretreatment. According to the results obtained, PEG-assisted GO pretreated substrate exhibited significantly increased sugar yield during enzymatic hydrolysis, particularly with PEG 4000, showing 35.4% higher glucose yield over 72 h. The improved glucose yield with PEG could be attributed to changes in the physicochemical structure and properties of residual lignin, mitigating its non-productive interaction with cellulase enzymes. PEG's presence in GO pretreatment also increased β-O-4 linkages preservation by 55% and reduced phenolic hydroxyl groups by 28% in lignin fragments versus no surfactants. This outcome resulted from introducing glycerol and PEG hydroxyl tails into the lignin structure, forming α-etherified lignin and rendering it more hydrophilic. Simulations confirmed strong Van Der Waals and hydrogen bonding interactions between lignin units and PEG, hindering lignin fragments repolymerization. Incorporating PEG in the organosolv pretreatment proves highly beneficial for cellulase-mediated lignocellulosic biorefinery, resembling a lignin-first strategy. The optimized process enables efficient biomass utilization for sustainable fuels and chemicals production.
Enhanced Stability and Sensitivity for CA-125 Detection Under Microfluidic Shear Flow Using Polyethylene Glycol-Coated Biosensor
The microfluidic-based point-of-care (POC) diagnostic tool has garnered significant interest in recent years, offering rapid and cost-effective disease detection. There is a growing trend toward integrating microfluidic platforms with biosensors, aligning lab-on-a-chip technologies with POC diagnostic devices. Despite numerous efforts to incorporate biosensors into microfluidic systems, researchers have performed very limited investigations on the stability of biomarker detection when biosensors operate under microfluidic shear flow conditions. Gold nanoparticles (AuNPs) are a widely employed material in capacitive biosensors for antibody immobilization and sensitivity enhancement. However, AuNPs have limitations in providing stable detection of biomarkers within microfluidic shear flow due to their agglomeration nature. This study addresses these limitations by employing 2 kDa polyethylene glycol (PEG) as an intermediate biofunctional layer to immobilize CA-125 antibodies on gold-interdigitated electrodes for the stable and accurate detection of CA-125 antigens. The stabilities and sensitivities of AuNPs and PEG-coated biosensors are evaluated under both static drop and microfluidic shear flow conditions for CA-125 antigen detection. The experimental results demonstrate a capacitive signal response (5660 pF at 10 kHz) 2.2 times higher using the PEG-coated biosensor than the signal (2551 pF at 10 kHz) measured by the AuNP-coated biosensor in the detection of CA-125 antigen–antibody conjugation under static drop conditions, indicating the higher sensitivity of the PEG-coated biosensor. Additionally, the PEG-coated biosensor exhibits better consistency for the CA-125 antigen detection between static drop and microfluidic shear flow conditions (Cp decrease in percentage (ΔCp%↓) = 2.9% at 10 kHz) compared to the electrical signals measured using the AuNP-coated biosensor (ΔCp%↓ = 32.4% at 10 kHz), which suggests that the PEG-coated biosensor demonstrates higher stability for CA-125 antigen detection under microfluidic shear flow conditions. With these significant improvements brought by the PEG-coated biosensor, especially under microfluidic conditions, a substantial hurdle in developing electrical biosensors for POC diagnostic applications has been overcome, expediting further advancements in the field.
Microscopic insights into the solvation of polyethylene glycol chains in water: A machine learning potential approach
Polyethylene glycol (PEG) is a structurally simple, nontoxic, and water-soluble polymer widely utilized in medical and pharmaceutical applications. Notably, when a PEG chain is immersed in water, the surrounding water molecules play a key role in driving conformational changes of this macromolecule. In this study, we explore the solvation behavior of PEG under mechanical strain using molecular dynamics simulations, with an interatomic potential obtained from machine learning. Our focus is on the transition from the favored coil-like conformation to an extended one under external force. Through analyses of radial distribution functions, hydrogen bonding, and solvation dynamics, we uncover how mechanical stretching influences the local hydration environment. Furthermore, we disentangle the enthalpic and entropic contributions to the conformational stability of PEG in water. Surprisingly, our neural network potential model identifies dewetting of PEG C-atoms, and not water H-bonding with PEG O-atoms, as the main enthalpic driving force for the coiling of PEG in water.
Molecular Engineering of Biorefining Lignin Waste for Solid-State Electrolyte
Lignin is the second most abundant renewable biopolymer on Earth but also a waste in both the paper industry and lignocellulosic biorefineries. Recently, lignin valorization has been extensively sought after to return economics, enhance carbon efficiency, and improve the bioeconomy, but the commercial value and size compatibility still hinder its applications. In this study, we developed a facile strategy to apply lignin waste into a solid-state electrolyte (SSE), which represents a safe next generation energy storage. Here, lignin was grafted with polyethylene glycol (PEG), an efficient lithium-ion (Li + ) conductive polymer, to enable its ion conduction. The synthesized PEG-g-lignin was mixed with poly(vinylidene fluoride)-co-hexafluoropropylene (PVDF-HFP) and PEG-g-lignin-based bis(trifluoromethanesulfonyl)imide (LiTFSI) to prepare a solid polymer electrolyte (SPE), which has an ionic conductivity of 2.5 × 10 –5 S/cm at 25 °C. This result was further enhanced to 6.5 × 10 –5 S/cm by adding an ion-conductive ceramic of Li 6.4 La 3 Ga 0.2 Zr 2 O 12 (LLGZO), which is referred to as composite polymer electrolyte (CPE). These data represent the highest ones among reported polymer-based SSE. A mechanistic study by using 2D HSQC NMR revealed that PEG-g-lignin has increased ether type β–O–4 linkages that can promote the interchain hopping of Li+ between lignin polymer chains, and 31 P NMR revealed that the lignin phenolic end can be associated by Li + . Moreover, the abundant aromatic moieties and methoxyl in PEG-g-lignin also enhanced Li + association and improved its ionic conductivity. The superior ionic conductivity of PEG-g-lignin-based SSE can enable massive applications of this biorefining waste in all-solid-state lithium batteries (ASSLBs), which has potential to promote the energy sector by promoting the bioeconomy and enhancing the renewability and sustainability of future energy storage.
Underlying Roles of Polyol Additives in Promoting CO2 Capture in PEI/Silica Adsorbents
Solid-supported amines having low molecular weight branched poly(ethylenimine) (PEI) physically impregnated into porous solid supports are promising adsorbents for CO2 capture. Co-impregnating short-chain poly(ethylene glycol) (PEG) together with PEI alters the performance of the adsorbent, delivering improved amine efficiency (AE, mol CO2 sorbed / mol N) and faster CO2 uptake rates. To uncover the physical basis for this improved gas capture performance, we probed the distribution and mobility of the polymers in the pores via small angle neutron scattering (SANS), solid-state NMR, and molecular dynamic (MD) simulation studies. SANS and MD simulations reveal that PEG displaces wall-bound PEI, making amines more accessible for CO2 sorption. Solid-state NMR and MD simulation suggest intercalation of PEG into PEI domains, separating PEI domains and reducing amine-amine interactions, providing potential PEG-rich and amine-poor interfacial domains that bind CO2 weakly via physisorption while providing facile pathways for CO2 diffusion. Contrary to a prior literature hypothesis, no evidence is obtained for PEG facilitating PEI mobility in solid supports. Instead, the data suggest that PEG chains coordinate to PEI, form larger bodies with reduced mobility compared to PEI alone. We also demonstrate promising CO2 uptake and desorption kinetics at varied temperatures, given by favorable amine distribution.
Ionic Liquids as Extreme Pressure Additives for Bearing Steel Applications
The protection of steel surfaces from wear under extreme pressure conditions is of major importance in several industries as it provides better performance and longer life of machinery. The motivation for this work was to study the lubrication of steel by ionic liquids (ILs), which have recently emerged as greener alternatives to commercial lubricants and additives. Three ILs based on sulfur-containing anions, used as 2-wt% additives in polyethylene glycol base oil (MW 200; PEG 200), were tested in the lubrication of ASTM 52100 bearing steel contacts in extreme pressure conditions (under mixed lubrication with a Hertzian pressure of 1.12 GPa) using a mini traction machine (MTM). Due to the poor resistance to corrosion of bearing steel, a semi-ester of succinic acid derivative corrosion inhibitor (Lanxess RC 4801) was added to the mixtures at a 1 wt% concentration. The ILs 1-hexyl-methylimidazolium trifluoromethanesulfonate ([C 6 mim][TfO]) and 1-hexyl-4-picolinium trifluoromethanesulfonate ([C 6 -4-pic][TfO]) revealed promising results in terms of surface protection of bearing steel. In contrast, 4-picolinium hydrogen sulfate ([4-picH][HSO 4 ]) as 2-wt% additive to PEG 200 + 1% RC 4801 did not show any improvement in wear performance compared to neat PEG 200 + 1% RC 4801. PEG 200 + 2% [C 6 mim][TfO] + 1%RC 4801 allowed for a decrease in wear up to ~ 76% and PEG 200 + 2% [C 6 -4-pic][TfO] + 1%RC 4801 up to ~ 46% when compared with neat PEG 200 + 1% RC 4801. Optical microscopy images suggest the formation of an adsorbed layer, which was further supported by chemical analysis via x-ray photoelectron spectroscopy (XPS) data for [C6mim][TfO].
Engineering endosomolytic nanocarriers of diverse morphologies using confined impingement jet mixing
The clinical translation of many biomolecular therapeutics has been hindered by undesirable pharmacokinetic (PK) properties, inadequate membrane permeability, poor endosomal escape and cytosolic delivery, and/or susceptibility to degradation. Overcoming these challenges merits the development of nanoscale drug carriers (nanocarriers) to improve the delivery of therapeutic cargo. Herein, we implement a flash nanoprecipitation (FNP) approach to produce nanocarriers of diverse vesicular morphologies by using various molecular weight PEG-bl-DEAEMA-co-BMA (PEG-DB) polymers. We demonstrated that FNP can produce uniform (PDI < 0.1) particles after 5 impingements, and that by varying the copolymer hydrophilic mass fraction, FNP enables access to a diverse variety of nanoarchitectures including micelles, unilamellar vesicles (polymersomes), and multi-compartment vesicles (MCVs). We synthesized a library of 2 kDa PEG block copolymers, with DEAEMA-co-BMA second block molecular weights of 3, 6, 12, 15, 20, and 30 kDa. All formulations were both pH responsive, endosomolytic, and capable of loading and cytosolically delivering small negatively charged molecules – albeit to different degrees. Using a B16.F10 melanoma model, we showcased the therapeutic potential of a lead FNP formulated PEG-DB nanocarrier, encapsulating the cyclic dinucleotide (CDN) cGAMP to activate the stimulator of interferon genes (STING) pathway in a therapeutically relevant context. Collectively, these data demonstrate that an FNP process can be used to formulate pH-responsive nanocarriers of diverse morphologies using a PEG-DB polymer system. As FNP is an industrially scalable process, these data address the critical translational challenge of producing PEG-DB nanoparticles at scale. Furthermore, the diverse morphologies produced may specialize in the delivery of distinct biomolecular cargos for other therapeutic applications, implicating the therapeutic potential of this platform in an array of disease applications.
Evaluation of 134 Ce/ 134 La as a PET Imaging Theranostic Pair for 225 Ac α-Radiotherapeutics
225 Ac-targeted α-radiotherapy is a promising approach to treating malignancies, including prostate cancer. However, α-emitting isotopes are difficult to image because of low administered activities and a low fraction of suitable γ-emissions. The in vivo generator 134 Ce/ 134 La has been proposed as a potential PET imaging surrogate for the therapeutic nuclides 225 Ac and 227 Th. In this report, we detail efficient radiolabeling methods using the 225 Ac-chelators DOTA and MACROPA. These methods were applied to radiolabeling of prostate cancer imaging agents, including PSMA-617 and MACROPA-PEG 4 -YS5, for evaluation of their in vivo pharmacokinetic characteristics and comparison to the corresponding 225 Ac analogs. Methods: Radiolabeling was performed by mixing DOTA/MACROPA chelates with 134 Ce/ 134 La in NH 4 OAc, pH 8.0, at room temperature, and radiochemical yields were monitored by radio–thin-layer chromatography. In vivo biodistributions of 134 Ce-DOTA/MACROPA.NH 2 complexes were assayed through dynamic small-animal PET/CT imaging and ex vivo biodistribution studies over 1 h in healthy C57BL/6 mice, compared with free 134 CeCl 3 . In vivo, preclinical imaging of 134 Ce-PSMA-617 and 134 Ce-MACROPA-PEG 4 -YS5 was performed on 22Rv1 tumor–bearing male nu/nu-mice. Ex vivo biodistribution was performed for 134 Ce/ 225 Ac-MACROPA-PEG 4 -YS5 conjugates. Results: 134 Ce-MACROPA.NH 2 demonstrated near-quantitative labeling with 1:1 ligand-to-metal ratios at room temperature, whereas a 10:1 ligand-to-metal ratio and elevated temperatures were required for DOTA. Rapid urinary excretion and low liver and bone uptake were seen for 134 Ce/ 225 Ac-DOTA/MACROPA. NH 2 conjugates in comparison to free 134 CeCl 3 confirmed high in vivo stability. An interesting observation during the radiolabeling of tumor-targeting vectors PSMA-617 and MACROPA-PEG 4 -YS5—that the daughter 134 La was expelled from the chelate after the decay of parent 134 Ce—was confirmed through radio–thin-layer chromatography and reverse-phase high-performance liquid chromatography. Both conjugates, 134 Ce-PSMA-617 and 134 Ce-MACROPA-PEG 4 -YS5, displayed tumor uptake in 22Rv1 tumor–bearing mice. The ex vivo biodistribution of 134 Ce-MACROPA.NH 2 , 134 Ce-DOTA and 134 Ce-MACROPA-PEG 4 -YS5 corroborated well with the respective 225 Ac-conjugates. Conclusion: These results demonstrate the PET imaging potential for 134 Ce/ 134 La-labeled small-molecule and antibody agents. The similar 225 Ac and 134 Ce/ 134 La-chemical and pharmacokinetic characteristics suggest that the 134 Ce/ 134 La pair may act as a PET imaging surrogate for 225 Ac-based radioligand therapies.
Effect of Solvent on Fluorescence Emission from Polyethylene Glycol-Coated Graphene Quantum Dots under Blue Light Illumination
To explore aggregate-induced emission (AIE) properties, this study adopts a one-pot hydrothermal route for synthesizing polyethylene glycol (PEG)-coated graphene quantum dot (GQD) clusters, enabling the emission of highly intense photoluminescence under blue light illumination. The hydrothermal synthesis was performed at 300 °C using o-phenylenediamine as the nitrogen and carbon sources in the presence of PEG. Three different solvents, propylene glycol methyl ether acetate (PGMEA), ethanol, and water, were used for dispersing the PEG-coated GQDs, where extremely high fluorescent emission was achieved at 530–550 nm. It was shown that the quantum yield (QY) of PEG-coated GQD suspensions is strongly dependent on the solvent type. The pristine GQD suspension tends to be quenched (i.e., QY: ~1%) when dispersed in PGMEA (aggregation-caused quenching). However, coating GQD nanoparticles with polyethylene glycol results in substantial enhancement of the quantum yield. When investigating the photoluminescence emission from PEG-coated GQD clusters, the surface tension of the solvents was within the range of from 26.9 to 46.0 mN/m. This critical index can be tuned for assessing the transition point needed to activate the AIE mechanism which ultimately boosts the fluorescence intensity. The one-pot hydrothermal route established in this study can be adopted to engineer PEG-coated GQD clusters with solid-state PL emission capabilities, which are needed for next-generation optical, bio-sensing, and energy storage/conversion devices.
Polyethylene Glycol Surface Modification and Polythiophene Side-Chain Chemistry: A Combined Strategy toward High-Capacity Lithium-Ion Battery Anodes
In the development of high-capacity lithium-ion batteries (LIBs), the combined optimization of active material interfaces and polymer binder chemistry plays a critical role in improving electrode performance and longevity. This work explores a dual design strategy incorporating polyethylene glycol (PEG) surface modification and carboxylated polythiophene side-chain tailoring to enhance the electrochemical behavior of magnetite (Fe 3 O 4 )-based anodes. PEG is employed to improve interfacial stability, while carboxylated polythiophene binders with varying alkyl side-chain lengths─poly[3-(potassium-4-butanoate)thiophene-2,5-diyl] (P3KBT), poly[3-(potassium-5-pentanoate)thiophene-2,5-diyl] (P3KPT), and poly[3-(potassium-6-hexanoate)thiophene-2,5-diyl] (P3KHT)─are used to modulate molecular interactions and ion transport. Among these three analogs, the PEG–Fe 3 O 4 –P3KHT electrode exhibits superior ion-transfer kinetics, the highest capacity retention, and the lowest charge-transfer resistance after extended cycling. Compared to their non-PEG analogs, PEG-coated electrodes demonstrate enhanced structural integrity and electrochemical behavior, emphasizing the synergistic effects of surface modification and side-chain chemistry. These findings highlight the importance of interfacial interactions and molecular design in achieving robust and high-performance composite anodes for next-generation LIBs.
Revealing the mechanism of surfactant-promoted enzymatic hydrolysis of dilute acid pretreated bamboo
Here, to improve the enzymatic digestibility of dilute acid pretreated bamboo residue (DABR), surfactants including PEG 4000 and Tween 80 were added to prevent the non-productive adsorption between residual lignin and enzyme. At the optimal loadings (e.g., 0.2 and 0.3 g surfactant/g lignin), the enzymatic digestibility of DABR improved from 29.4% to 64.6% and 61.6% for PEG 4000 and Tween 80, respectively. Furthermore, the promoting mechanism of these surfactants on enzymatic hydrolysis was investigated by real-time surface plasmon resonance (SPR) and fluorescence spectroscopy. Results from SPR analysis showed that Tween 80 outperformed PEG 4000 in terms of dissociating the irreversible cellulase adsorption onto lignin. Fluorescence quenching mechanism revealed that PEG 4000 and Tween 80 intervened the interaction between lignin and cellulase by hydrogen bonds/Van der Waals and hydrophobic action, respectively. This work provided an in-depth understanding of the mechanisms of PEG 4000 and Tween 80 on enhancing the enzymatic hydrolysis efficiency.