Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHASE DIAGRAMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Influence of finite volume and magnetic field effects on the QCD phase diagram

The 2 + 1 SU(3) Polyakov linear sigma model (PLSM) is used to investigate the respective influence of a finite volume and a magnetic field on the quark-hadron phase boundary in the plane of baryon chemical potential (μ B ) vs. temperature (T) of the QCD phase diagram. The calculated results indicate sizable shifts of the quark-hadron phase boundary to lower values of (μ B and T) for increasing magnetic field strength, and an opposite shift to higher values of (μ B and T) for decreasing system volume. Such shifts could have important implications for extraction of the thermodynamic properties of the QCD phase diagram from heavy ion data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Novel phase diagram behavior and materials design in heterostructural semiconductor alloys

Structure and composition control the behavior of materials. Isostructural alloying is historically an extremely successful approach for tuning materials properties, but it is often limited by binodal and spinodal decomposition, which correspond to the thermodynamic solubility limit and the stability against composition fluctuations, respectively. We show that heterostructural alloys can exhibit a markedly increased range of metastable alloy compositions between the binodal and spinodal lines, thereby opening up a vast phase space for novel homogeneous single-phase alloys. We distinguish two types of heterostructural alloys, that is, those between commensurate and incommensurate phases. Because of the structural transition around the critical composition, the properties change in a highly nonlinear or even discontinuous fashion, providing a mechanism for materials design that does not exist in conventional isostructural alloys. The novel phase diagram behavior follows from standard alloy models using mixing enthalpies from first-principles calculations. Furthermore, thin-film deposition demonstrates the viability of the synthesis of these metastable single-phase domains and validates the computationally predicted phase separation mechanism above the upper temperature bound of the nonequilibrium single-phase region.

14 SOLAR ENERGY↗

Phase diagram and thermal properties of strong-interaction matter

We introduce a novel method for computing the (μ, T)-dependent pressure in continuum QCD, from which we obtain a complex phase diagram and predictions for thermal properties of the dressed-quark component of the system, providing the in-medium behavior of the related trace anomaly, speed of sound, latent heat, and heat capacity.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Phase diagram and magnetocaloric effects in Ni{sub 1-x}Cr{sub x}MnGe{sub 1.05}

The structural and magnetic properties of the Ni{sub 1−x}Cr{sub x}MnGe{sub 1.05} system (for x = 0, 0.035, 0.070, 0.105) have been studied by x-ray diffraction (XRD), differential scanning calorimetry (DSC), and magnetization measurements. A change in crystal structure from orthorhombic to hexagonal was observed in the XRD data at chromium concentrations of x = 0.035, 0.070, and 0.105. The values of the cell parameters and volume of the unit cell for orthorhombic and hexagonal phase were determined. It was found that the partial substitution of Cr for Ni in Ni{sub 1−x}Cr{sub x}MnGe{sub 1.05} results in a first order magnetostructural transition from antiferromagnetic to ferromagnetic (FM) at T{sub M} = 132 K for x = 0.105. A FM to paramagnetic second order transition has been observed at T{sub C} = 204 K. A magnetic entropy change of |ΔS{sub M}| = 4.5 J/kg K for ΔH = 5 T was observed in the vicinity of T{sub C} and T{sub M} for x = 0.105. The values of the latent heat (L = 2.2 J/g) and corresponding total entropy changes (ΔS{sub T} = 16 J/kg K) have been determined from DSC measurements. A concentration-dependent phase diagram of transition temperatures has been constructed using the magnetic and DSC data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Density-functional theory computer simulations of CZTS{sub 0.25}Se{sub 0.75} alloy phase diagrams

Density-functional theory simulations of CZTS, CZTSe, and CZTS{sub 0.25}Se{sub 0.75} photovoltaic compounds have been performed to investigate the stability of the CZTS{sub 0.25}Se{sub 0.75} alloy vs. decomposition into CZTS, CZTSe, and other secondary compounds. The Gibbs energy for vibrational contributions was estimated by calculating phonon spectra and thermodynamic properties at finite temperatures. It was demonstrated that the CZTS{sub 0.25}Se{sub 0.75} alloy is stabilized not by enthalpy of formation but primarily by the mixing contributions to the Gibbs energy. The Gibbs energy gains/losses for several decomposition reactions were calculated as a function of temperature with/without intermixing and vibration contributions to the Gibbs energy. A set of phase diagrams was built in the multidimensional space of chemical potentials at 300 K and 900 K temperatures to demonstrate alloy stability and boundary compounds at various chemical conditions. It demonstrated for CZTS{sub 0.25}Se{sub 0.75} that the chemical potentials for stability differ between typical processing temperature (∼900 K) and operating temperature (300 K). This implies that as cooling progresses, the flux/concentration of S should be increased in MBE growth to maintain the CZTS{sub 0.25}Se{sub 0.75} in a thermodynamically stable state to minimize phase decomposition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Research Update: Magnetic phase diagram of EuTi 1-x B x O 3 (B = Zr, Nb)

Herein, we report the magnetic phase diagram of EuTi 1-x B x O 3 (B = Zr, Nb), determined from magnetization and heat capacity measurements. Upon Zr-doping, the antiferromagnetic ordering temperature TN of EuTi 1-x Zr x O 3 gradually decreases from 5.6 K (x = 0) to 4.1 K (x = 1). Whereas a similar decrease in TN is observed for small amounts of Nb doping (x ≤ 0.05), ferromagnetism is induced in EuTi 1-x Nb x O 3 with x > 0.05. Lastly, the ferromagnetic interaction between localized Eu 4f spins mediated by itinerant electrons introduced by Nb doping results in the ferromagnetism in EuTi 1-x Nb x O 3 .

36 MATERIALS SCIENCE↗

Study of phase relationships in the Sr{sub 3}(PO{sub 4}){sub 2}–CePO{sub 4} system. Phase diagram and thermal characteristics of phases

A diagram representing phase relationships in the Sr{sub 3}(PO{sub 4}){sub 2}–CePO{sub 4} phosphate system has been developed on the basis of results obtained by thermal analysis (DTA/DSC/TGA) and X-ray diffraction (XRD) methods. One intermediate compound with the formula Sr{sub 3}Ce(PO{sub 4}){sub 3} occurs in the Sr{sub 3}(PO{sub 4}){sub 2}–CePO{sub 4} system at temperatures exceeding 1045 °C. The compound has a eulytite structure with the following structural parameters: a=b=c=10.1655(8) Å, α=β=γ=90.00°, V=1050.46(6) Å{sup 3}. It's melting point exceeds 1950 °C. A limited solid solution exists in the system, which possesses the structure of a low-temperature form of Sr{sub 3}(PO{sub 4}){sub 2}. At 1000 °C the maximal concentration of CePO{sub 4} in the solid solution is below 20 mol%. The solid solution phase field narrows with increased temperature. There is a eutectic point in the (Sr{sub 3}(PO{sub 4}){sub 2}+Sr{sub 3}Ce(PO{sub 4}){sub 3}) phase field at 1765 °C and 15 mol% of CePO{sub 4}. The melting temperature of Sr{sub 3}(PO{sub 4}){sub 2} is 1882±15 °C. - Graphical abstract: The phase diagram of Sr{sub 3}(PO{sub 4}){sub 2}–CePO{sub 4} system showing the stability ranges of limited solid solution and Sr{sub 3}Ce(PO{sub 4}){sub 3} phases. - Highlights: • Sr{sub 3}(PO{sub 4}){sub 2} melts at 1882 °C. • Phase diagram of Sr{sub 3}(PO{sub 4}){sub 2}–CePO{sub 4} system has been proposed. • Limited solid solution of CePO{sub 4} in Sr{sub 3}(PO{sub 4}){sub 2} forms in the system. • The Sr{sub 3}Ce(PO{sub 4}){sub 2} phosphate is stable at temperatures above 1045 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ternary Phase Diagram of Water/Bio-Oil/Organic Solvent for Bio-Oil Fractionation

Separating bio-oil by fractionation with different chemical composition is a critical step to refine these oils and obtain high value products. Cold-water precipitation of pyrolytic lignin from bio-oil is the most common approach used. However, the obtained aqueous phase from this method still contain phenols, is diluted and difficult to use. In this study, the use of liquid-liquid extraction with different solvents (1-butanol, ethyl acetate, 1-octanol, dichloromethane, toluene, and hexane) for the separation of targeted molecules (lignin oligomers, sugars, acetic acid) is explored. Ternary phase diagrams for the organic solvent/water/bio-oil are reported. The partition coefficient of compounds of interest (both light and heavy fraction) is reported for the liquid-liquid equilibrium zone. When using butanol as solvent, the highest separation factor of total phenols over total sugars was observed. Furthermore, our results provide information to design L-L separation units with the capacity to selectively recover targeted molecules from pyrolysis oils.

09 BIOMASS FUELS↗

Algorithmic phase diagrams

Algorithmic phase diagrams are a neat and compact representation of the results of comparing the execution time of several algorithms for the solution of the same problem. As an example, the recent results are shown of Gannon and Van Rosendale on the solution of multiple tridiagonal systems of equations in the form of such diagrams. The act of preparing these diagrams has revealed an unexpectedly complex relationship between the best algorithm and the number and size of the tridiagonal systems, which was not evident from the algebraic formulae in the original paper. Even so, for a particular computer, one diagram suffices to predict the best algorithm for all problems that are likely to be encountered the prediction being read directly from the diagram without complex calculation.

Hockney, Roger↗