Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHOSPHATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Uptake and binding of La 3+ and Cr 3+ ions by alkali metal substituted alpha-zirconium phosphate

The conversion of alpha-zirconium phosphate, Zr(HPO 4 ) 2 ·H 2 O, to the K-, Rb-, and Cs-phases and the subsequent ion exchange behavior of these alkali metal phases, A-ZrP, with La 3+ and Cr 3+ have been investigated. The conversion to the A-ZrP phases was achieved by reaction with metal chloride, metal hydroxide solution, and confirmed through various techniques, including X-ray powder diffraction, thermogravimetry analysis, IR spectroscopy, scanning and transmission electron microscopy, and X-ray photoelectron spectroscopy. The effect of material hydration, which increased the interlayer distance, was also examined. The ion exchange behavior of the A-ZrP showed strong affinity for both La 3+ , a representative for trivalent lanthanide metals, and Cr 3+ , a representative for the trivalent transition metals, with a rapid, near quantitative removal of the M 3+ ions at a pH of 3 when the ion concentration was ≤25% of the ion exchange capacity of the materials. Additionally, the ion affinity was shown to be pH and concentration-dependent, decreasing with a decrease in pH or an increase in ion concentration. Lastly, the binding strength of La- and Cr-loaded ZrP materials was examined through a series of leaching experiments in a carbonate buffer, phosphate buffer, HEPES buffer, and a series of EDTA solutions at various concentrations. No observable leaching occurred in the carbonate buffer, phosphate buffer, HEPES buffer, or when the EDTA concentration was below 0.1 mM. These results highlight the potential for the A-ZrP materials to provide a platform for trivalent transition metal and trivalent lanthanide radionuclide capture for various applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Expression of a Bacterial Trehalose 6-Phosphate Synthase Gene otsA in Camelina sativa Seeds Promotes the Channelling of Carbon Towards Oil Accumulation

Improving seed oil yield is essential for developing Camelina sativa as a sustainable biofuel crop. Fatty acid synthesis depends on the production of acetyl-CoA from photosynthetically derived sugars. Trehalose 6-phosphate (T6P), a proxy for sucrose availability, can link sugar status to plant growth and development. Synthesised by trehalose 6-phosphate synthase (TPS) from UDP-glucose and glucose-6-phosphate, T6P plays a regulatory role in metabolism. Our previous studies on Arabidopsis transgenic lines constitutively expressing the E. coli otsA (encoding TPS) showed increased T6P levels and seed triacylglycerol, along with stunted growth. In the present study we express otsA in camelina under the control of a seed-specific Phaseolin promoter. Seeds of the resulting transgenic lines accumulated high levels of T6P, and a 15%–20% increase in total fatty acids and triacylglycerol compared to wild-type. Molecular analysis showed the transgenic seeds had reduced SnRK1 activity, elevated WRI1 protein levels, and increased the levels of WRI1 and its target genes, along with enhanced rates of fatty acid synthesis that increased seed weights relative to wild type. Notably, the increase in oil did not affect seed protein levels but did reduce the soluble metabolite fraction. Crucially, seed-specific expression of otsA mitigated the growth defects associated with constitutive otsA expression, and the transgenic lines showed normal seed development and germination. These findings demonstrate that targeted T6P modulation via seed-specific otsA expression is an effective metabolic engineering strategy to boost oil production in camelina and potentially in other oilseed crops and bioenergy crops such as energycane, sorghum and miscanthus.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Mild Hydrothermal Crystal Growth of Two Luminescing Uranyl Phosphates Exhibiting an Autunite-Type Sheet Structure

Two new layered uranyl phosphate compounds, K(UO 2 )PO 4 (H 2 O) 3 and Na(UO 2 )PO 4 (H 2 O) 1.52 , crystallizing in an autunite-type sheet structure, were successfully synthesized as both single-crystals and polycrystalline powders under mild hydrothermal conditions. The compound K(UO 2 )PO 4 (H 2 O) 3 crystallizes in the tetragonal crystal system with the space group P4/ncc, exhibiting lattice parameters of a = b = 6.99320(7) Å and c = 17.8389(3) Å. Similarly, Na(UO 2 )PO 4 (H 2 O) 1.52 also crystallizes in the tetragonal crystal system, however, in the space group P4/nmm and exhibits lattice parameters of a = b = 6.9787 Å and c = 8.6303(17) Å. Both compounds adopt layered structures, a characteristic feature of uranyl phosphates, and exhibit intense green fluorescence typical for uranyl-containing materials. As a result, the infrared spectroscopy, photoluminescence, and scintillation properties of these compounds were investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Phosphate-Based Approaches for Dechlorination and Treatment of Salt Waste from Electrochemical Processing of Used Nuclear Fuel: A Perspective on Recent Work

Phosphate-based reagents are being considered by the U.S. Department of Energy (DOE) Office of Nuclear Energy to process halide salt-based nuclear wastes for stabilization prior to disposal. As evidenced by the Experimental Breeder Reactor-II (EBR-II) project, electrochemical processing (pyroprocessing) can be employed to recover uranium and other actinides for reintegration into the nuclear fuel cycle from metallic fuels. The resultant salt-based wastes generated from electrochemical processing of EBR-II fuel contains fission products within a LiCl–KCl eutectic salt that necessitate appropriate disposal. This paper provides an overview of recent efforts to support halide-based salt waste treatment for disposition, as well as a basis for comparison with other related efforts in salt waste treatment through salt partitioning initiatives. The U.S. DOE has selected a phosphate waste form reference material for further investigation and longer-term studies.

electrorefiner↗
DOE OSTI2024

Structure–property relations of sodium iron phosphate nuclear waste glasses: Effects of iron redox ratio and glass composition

Iron phosphate glasses, known for their exceptional chemical durability and potential applicability in nuclear waste management, have gained significant attention over the years. The structures of these glasses are complicated by the coexistence of Fe 3+ and Fe 2+ , which plays a crucial role in determining their structures and properties. Here, this work uses molecular dynamics simulations to study the structural changes in Na 2 O–Fe 2 O 3 –P 2 O 5 glasses with varying glass composition and Fe 2+ /Fe 3+ redox ratio. It was found that the redox ratio and modifier contents significantly affected the short-range and medium-range orders in the glasses. Significant changes in the local environments around P 5+ and Fe 3+ were observed, as reflected by the bond distances and coordination numbers. Na + cations are found to preferentially associate with Fe 3+ (rather than Fe 2+ ), whereas Fe 2+ has stronger association with P 5+ than Na + , confirming the structural role of Fe 2+ as a glass modifier. The disruptions in P–O–P linkages upon increasing FeO suggest that FeO causes glass depolymerization. These glasses achieved higher connectivity with increasing Fe 3+ / (Fe 3+ + Fe 2+ ) ratios, conerting phosphorous Q 2 to Q 3 units and iron Q 5 units to Q 4 units. The decrease of nonbridging oxygen fractions with increasing Fe 3+ / (Fe 3+ + Fe 2+ ) ratios, through creating P–O–Fe linkages, is the main reason of enhanced network connectivity. Quantitative structure–property relationship analyses with different structural descriptors were used to correlate with measured properties. The analyses provided valuable insights into structure–property relationships, emphasizing the importance of choosing relevant energy parameters and defining glass network connectivity, particularly in F net descriptors. It was found the Fe–O–P linkage density exhibits strong correlations to measured dissolution rates, supporting the importance of these linkages in improving the chemical durability in iron phosphate glasses.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

Uptake and Binding of At‐211 Into K‐ and Cs‐Derivatives of Alpha‐Zirconium Phosphate Nanoplatelets for Use as a Targeted Alpha Therapy Delivery Platform

The ion exchange behavior of K- and Cs-derivatives of α-zirconium phosphate, A-ZrP, with the targeted alpha therapy (TAT) radionuclide 211 At, as At + and AtO + , has been investigated. The K-ZrP shows strong affinity for both At+ and AtO + , ≥99% uptake. The affinity to Cs-ZrP was less pronounced, 87%–94% uptake, favoring At + . The binding strength was tested against several leaching solutions, including carbonate, phosphate buffered saline (PBS), 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES) buffers, and ethylenediaminetetraacetic acid (EDTA) solutions at various concentrations (0.1–10 mM). K-ZrP retained 211 At in all buffer and EDTA solutions up to 1 mM (<0.5% leaching). The Cs-ZrP showed no leaching of At + , while AtO + leached (1%–3%) in the carbonate and HEPES buffers, along with all of the EDTA solutions, with complete retention only in the PBS buffer. In all cases, when the EDTA concentration reached 10 mM, 211 At leaching was observed. Once incorporated into the ZrP nanoplatelets, significant shielding of the α-particles was observed, not only attenuating the intensity of the emission but also reducing the energy of the α-particles themselves exiting the nanoplatelets. These properties provide the basis for K-ZrP, and to a lesser extent, Cs-ZrP to be further considered as potentially promising candidates for a delivery mechanism of 211 At for application in TAT.

astatine-211↗
DOE OSTI2025

Phosphate-modulated transformation of Sb(V)-bearing ferrihydrite under microbial iron- and sulfate-reducing conditions

Antimony (Sb) is a toxic metalloid that poses environmental risks in terrestrial and aquatic systems. The fate of the Sb(V) oxyanion, Sb(OH) 6 − , is governed by complex biogeochemical processes, including immobilization by ferric (Fe(III)) oxides, reduction by sulfide, and the less-explored competitive adsorption with other anions such as phosphate (PO 4 3− ). Here, this study investigates the interplay between such mechanisms in controlling the behavior of Sb(V) associated with ferrihydrite (Fh) under Fe(III)- and sulfate-reducing conditions, with a particular emphasis on the role of phosphate in influencing Sb(V) mobility and transformation. Anoxic reactors that contained Sb(V)-coprecipitated Fh, varying PO 4 3− concentrations (0, 0.2, and 2 mM), and sulfate, were inoculated with a microbial community sourced from Sb-contaminated soil. Additionally, abiotic reactors with either Sb(V)-adsorbed or Sb(V)-coprecipitated Fh and different PO 4 3− loadings (0–100 mM) were created to investigate the competitive adsorption mechanisms in the absence of microbial activity. Results from the abiotic reactors suggest that Sb(V) is likely incorporated into the Fh structure, with only minor amounts remaining surface-bound and extractable by PO 4 3− . In the biotic reactors, microbial Fe(III) and sulfate reduction were more extensive in the presence of PO 4 3− . At 0.2 mM PO 4 3− , microbial activity transformed Fh into siderite and led to the complete reduction of Sb(V) to Sb(III) as stibnite (Sb 2 S 3 ). At 2 mM PO 4 3− , the greater coverage by PO 4 3− stabilized Fh and decreased the extent of both Fe(III) and Sb(V) reduction, and shifted the reduced products to mackinawite and Sb(III) adsorbed onto Fh, in addition to stibnite formation. This study demonstrates that while PO 4 3− may not directly compete with Sb(V) for sorption sites, it can influence Sb mobility in Fe(III)- and sulfate-reducing environments by enhancing microbial activity and altering the mineralization pathways.

Microbial Fe(III) and sulfate reduction↗
DOE OSTI2024

Elucidating Phosphate and Cadmium Cosorption Mechanisms on Mineral Surfaces with Direct Spectroscopic and Modeling Evidence

The simultaneous sorption of cations and anions at the mineral–water interface can substantially alter their individual sorption characteristics; however, this phenomenon lacks a mechanistic understanding. Our study provides direct spectroscopic and modeling evidence of the molecular cosorption mechanisms of the cadmium ion (Cd 2+ ) and phosphate (P) on goethite and layered manganese (Mn) oxide of birnessite, through in situ attenuated total reflection Fourier-transform infrared (ATR-FTIR), P K-edge X-ray absorption near-edge structure (XANES) spectroscopy, and surface complexation modeling. Phosphate synergistically cosorbed with Cd on goethite predominantly through P-bridged ternary complexes (≡Fe–P–Cd) and electrostatic interactions at wide pH conditions. Likewise, P and Cd exhibited synergistic cosorption on birnessite by forming P-bridged ternary complexes (≡Mn–P–Cd) and weak competitive sorption at the layer edge sites. As pH and Cd loading increased, the surface P species transitioned from a binary complex to a ternary complex and/or Cd 3 (PO 4 ) 2 precipitate for both goethite and birnessite. Compared to that in solution at pH 8, the formation of Cd 3 (PO 4 ) 2 was inhibited by the presence of goethite and birnessite, ascribed to the specific adsorption of P and Cd, more pronounced in birnessite due to the stronger sorption of Cd at its vacant sites. Finally, the discovered cosorption mechanisms of P and Cd have important implications for understanding and predicting their mobility and availability in Cd-contaminated settings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Electrically Accelerated Mechanochemical Film Formation by a Phosphonium Phosphate Ionic Liquid: An In Situ Chemical Kinetics Investigation

Powertrains in electric vehicles are exposed to stray currents that accelerate wear and cause failure of mechanical components. These durability issues are further aggravated when using low-viscosity lubricants, which are desired for energy efficiency but create harsher contact conditions at sliding interfaces. This study investigates a phosphonium phosphate ionic liquid as a performance-enhancing additive in a low-viscosity base oil for lubricating electrified sliding interfaces. Ionic liquids can adsorb and react on contact interfaces via stress-assisted chemical reactions, generating nanometric tribofilms that provide protection against wear. However, the effect of electric fields on the mechanochemistry of ionic liquids is poorly understood, hindering their adoption in lubricants for electrified powertrains. This article reports an in situ optical interferometry study of ionic liquid derived tribofilm growth kinetics at stressed sliding/rolling interfaces under direct currents. The application of electric currents accelerated tribofilm formation up to a critical current density (∼1.4 A/mm 2 ), beyond which pitting-induced wear dominated. The tribofilms were composed of iron phosphates, iron oxides, and carbon species, with iron oxides becoming predominant under applied currents. These tribofilms prevented the scuffing failure of steel surfaces under electrified conditions. Based on the results, a kinetic model is proposed that integrates electric current effect into the classical stress-assisted thermal activation framework to allow prediction of tribofilm growth at electrified sliding contacts. This framework provides crucial guidance for designing next-generation lubricants for electrified transportation and power generation systems.

additives↗
DOE OSTI2025

Controlled phosphate doping into nanoscopic SiO 2 proton conducting membranes

This article describes a method to introduce phosphate (PO 4 ) into SiO 2 atomic layer deposition (ALD) films in a self-limiting fashion. The method involves the use of a less common phosphate precursor, trimethyl phosphite [P(OMe) 3 ], to introduce PO 4 as a low-level dopant, <1 at. %, into a SiO 2 ALD process using bis(ethylmethylamino)silane and a modified O 3 conversion. P(OMe) 3 does not deposit a film with typical oxygen sources but incorporates as PO 4 in an ABC-type ALD scheme at deposition temperatures ranging from 100 to 300 °C. Addition of up to ∼1 at. % of PO 4 does not significantly impact the film density or concentrations of carbon and nitrogen impurities, which are both <0.4 at. %. Despite the relatively low dopant concentrations, PO 4 incorporation is shown to have a large impact on transport properties of the film. When explored as proton (H + )-conducting membranes, undoped SiO 2 ALD films showed H + conductivities (3 × 10 −6 –8 × 10 −5 S cm −1 ) and low H 2 permeabilities (<10 −9 cm 2 s −1 ) when measured at room temperature. The addition of PO 4 is shown to increase H + conductivity to 2 × 10 −4 S cm −1 , while maintaining low H 2 permeability of <10 −9 cm 2 s −1 . The ratio of H + conductivity to H 2 permeability, a key performance metric for H + -conducting membranes used in water electrolyzers, exceeds that of commercial Nafion-117 membranes. Here, the moderate H + conductivity and very low H 2 permeability of PO 4 -doped SiO 2 films make them promising candidates as fluorine-free replacements for Nafion in applications such as water electrolysis, hydrogen fuel cells, and redox flow batteries.

Atomic layer deposition↗
DOE OSTI2026

The solubility and speciation of REE phosphate endmembers (CePO 4 and YPO 4 ) in Cl-rich aqueous fluids from 350 to 450 °C and implications for natural systems

The rare earth elements (REE) are important metals used increasingly in advanced technologies. Within the crust, the elements Ce and Y are commonly more abundant compared to other lanthanides and comprise important end-member constituents of REE-bearing minerals. Specifically, Ce is part of the light (L) REE which have larger ionic radii than the heavy (H) REE, which are grouped together with Y. These differences in ionic radius can lead to important physico-chemical trends within the lanthanide group. Despite a recent increase in experimental and thermodynamic data for the REE at high temperature and pressure, there is still a significant lack of these data at supercritical conditions. In this study we conducted batch-type experiments to measure the solubility of REE phosphates (CePO 4 and YPO 4 ) at varying starting pH (1.5–10), and salinity (0.01–1.4 mol/kg NaCl) at 350 and P sat , and from 400 to 450 °C at 700 bar. Results show that the solubility of Ce (33–0.14 ppb) is generally higher than Y (13–0.13 ppb) and that Ce complexes more strongly with both chloride and hydroxyl ligands compared to Y. The solubilities of both REE phosphates are highly pH-dependent and, to a lesser extent, depend on salinity at the studied conditions. The solubility data from this study were implemented into the GEMSFITS program to optimize the thermodynamic properties of Ce and Y hydroxyl and chloride species. The updated standard partial molal Gibbs energies of formation (Δ f G 0 T,P ) are used within the experimental temperature and pressure range to accurately predict the CePO 4 and YPO 4 solubility and Ce and Y speciation behavior. Based on the updated thermodynamic properties we also provide formation constants (log β n Cl,OH ) for Ce and Y hydroxyl and chloride species. Updated thermodynamic properties are applied to model REE-apatite dissolution and REE mobility based on the Pea Ridge iron oxide apatite deposit in Missouri, USA. The apatite dissolution model replicates natural observations including the replacement of monazite and xenotime after apatite and is an example of the utility of the new thermodynamic constants applied to supercritical crustal fluids. Furthermore, the findings of this study advance the predictive capabilities of geochemical models, our understanding of the behavior of individual REE, and permit modeling the overarching fractionation trends between LREE and HREE in supercritical crustal fluids.

58 GEOSCIENCES↗
DOE OSTI2026

Desorption of Phosphate from Iron-Bearing Soil Minerals by a Plant Secondary Metabolite

In soils, phosphorus readily adsorbs to the surfaces of ubiquitous iron (oxyhydr)oxide minerals, rendering it less accessible to plants and microorganisms. Plants have a number of strategies to access iron, among them the secretion of redox-active metabolites from their roots. Although these strategies likely increase the bioavailability of surface-adsorbed phosphorus through reductive dissolution, their effect on phosphorus cycling has not yet been investigated. We tested the ability of fraxetin, a coumarin-type redox-active metabolite produced by the model plant Arabidopsis thaliana and other dicotyledon plant species, to reductively solubilize phosphate from the surface of ferrihydrite. Our findings show that, at low and neutral pH, fraxetin increased aqueous phosphate concentrations under both oxic and anoxic conditions; at high pH, it was only effective in anoxic experiments. Additionally, a combination of liquid chromatography–mass spectrometry and spectroscopic methods demonstrated substantial fraxetin adsorption to the mineral surface but showed that iron reduction did not alter the mineral structure or change the nature of the chemical environment of the phosphorus atom over short time scales. These results provide evidence that the secretion of redox-active metabolites from roots is likely to be an effective phosphorus acquisition tactic in iron-rich soils.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Structural basis of undecaprenyl phosphate glycosylation leading to polymyxin resistance in Gram-negative bacteria

In Gram-negative bacteria, the enzymatic modification of Lipid A with aminoarabinose (L-Ara4N) leads to resistance against polymyxin antibiotics and cationic antimicrobial peptides. ArnC, an integral membrane glycosyltransferase, attaches a formylated form of aminoarabinose to the lipid undecaprenyl phosphate, enabling its association with the bacterial inner membrane. Here, we present cryo-electron microscopy structures of ArnC from S. enterica in apo and nucleotide-bound conformations. These structures reveal a conformational transition that takes place upon binding of the partial donor substrate. Using coarse-grained and atomistic simulations, we provide insights into substrate coordination before and during catalysis, and we propose a catalytic mechanism that may operate on all similar metal-dependent polyprenyl phosphate glycosyltransferases. The reported structures provide a new target for drug design aiming to combat polymyxin resistance.

Ashraf, Khuram U. [Rutgers University, Newark, NJ ↗
DOE OSTI2024

Lysosomal enzyme binding to the cation-independent mannose 6-phosphate receptor is regulated allosterically by insulin-like growth factor 2

The cation-independent mannose 6-phosphate receptor (CI-MPR) is clinically significant in the treatment of patients with lysosomal storage diseases because it functions in the biogenesis of lysosomes by transporting mannose 6-phosphate (M6P)-containing lysosomal enzymes to endosomal compartments. CI-MPR is multifunctional and modulates embryonic growth and fetal size by downregulating circulating levels of the peptide hormone insulin-like growth factor 2 (IGF2). The extracellular region of CI-MPR comprises 15 homologous domains with binding sites for M6P-containing ligands located in domains 3, 5, 9, and 15, whereas IGF2 interacts with residues in domain 11. How a particular ligand affects the receptor’s conformation or its ability to bind other ligands remains poorly understood. To address these questions, we purified a soluble form of the receptor from newborn calf serum, carried out glycoproteomics to define the N-glycans at its 19 potential glycosylation sites, probed its ability to bind lysosomal enzymes in the presence and absence of IGF2 using surface plasmon resonance, and assessed its conformation in the presence and absence of IGF2 by negative-staining electron microscopy and hydroxyl radical protein footprinting studies. Together, our findings support the hypothesis that IGF2 acts as an allosteric inhibitor of lysosomal enzyme binding by inducing global conformational changes of CI-MPR.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Glyceraldehyde-3-phosphate dehydrogenase homologs as bifunctional gatekeepers of metabolic segregation in Pseudomonas putida

Metabolically versatile Pseudomonas species can assimilate various glycolytic and gluconeogenic substrates. Simultaneous assimilation is known to segregate carbons from each substrate type into different metabolic pathways. However, the mechanisms of this metabolic segregation remain unresolved. Here, we investigate Pseudomonas putida KT2440 during processing of the sugar glucose through glycolysis versus the phenolic acid ferulate through gluconeogenesis. Metabolome profiling reveals up to twofold less tricarboxylic acid cycle metabolites but up to 10-fold higher metabolites of upper glycolysis, pentose-phosphate, and Entner–Doudoroff pathways in glucose-grown cells compared to ferulate-grown cells. After 13C-substrate switching, kinetic isotopic profiling captures rapid assimilation of new substrate carbons into initial catabolic pathways, but incorporation into downstream pathways is absent or incomplete. Proteomics identifies a 22-fold higher abundance of one homolog of glyceraldehyde-3-phosphate dehydrogenase (GAPDH, GapA) in cells fed on glucose relative to ferulate, while abundance of another homolog (GapB) remains unchanged. Growth phenotypes and quantitative metabolomics for single and double knockout mutants of these GAPDH homologs indicate only GapA involvement in glycolytic flux, which can be compensated by the Entner–Doudoroff pathway, and distinct preference of GapB with minimal role of GapA for gluconeogenic flux. Accordingly, growth of triple knockout mutant with deletion of gapA, gapB, and edd is possible only when glycolytic and gluconeogenic substrates are provided together to meet metabolic demands in a segregated fashion, but metabolic tradeoffs lead to slow growth. A mathematical, experimentally constrained, model of the GAPDH node shows that tuning of GapA and GapB concentrations enables transition between flux regimes for nutritional adaptability.

Zhou, Nanqing [Northwestern University, Evanston]↗
DOE OSTI2024

Genetically manipulated chloroplast stromal phosphate levels alter photosynthetic efficiency

Abstract The concentration of inorganic phosphate (Pi) in the chloroplast stroma must be maintained within narrow limits to sustain photosynthesis and to direct the partitioning of fixed carbon. However, it is unknown if these limits or the underlying contributions of different chloroplastic Pi transporters vary throughout the photoperiod or between chloroplasts in different leaf tissues. To address these questions, we applied live Pi imaging to Arabidopsis (Arabidopsis thaliana) wild-type plants and 2 loss-of-function transporter mutants: triose phosphate/phosphate translocator (tpt), phosphate transporter 2;1 (pht2;1), and tpt pht2;1. Our analyses revealed that stromal Pi varies spatially and temporally, and that TPT and PHT2;1 contribute to Pi import with overlapping tissue specificities. Further, the series of progressively diminished steady-state stromal Pi levels in these mutants provided the means to examine the effects of Pi on photosynthetic efficiency without imposing nutritional deprivation. ΦPSII and nonphotochemical quenching (NPQ) correlated with stromal Pi levels. However, the proton efflux activity of the ATP synthase (gH+) and the thylakoid proton motive force (pmf) were unaltered under growth conditions, but were suppressed transiently after a dark to light transition with return to wild-type levels within 2 min. These results argue against a simple substrate-level limitation of ATP synthase by depletion of stromal Pi, favoring more integrated regulatory models, which include rapid acclimation of thylakoid ATP synthase activity to reduced Pi levels.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Plasmonic Ag nanocomposite phosphate glasses produced via γ-ray irradiation as reduction route

This paper reports on the impact of γ-ray irradiation (10, 100 kGy) on melt-quenched Ag + -doped phosphate glass and the effects of subsequent thermal processing leading to the production of plasmonic Ag nanocomposites. The γ-irradiated glasses were characterized alongside the pristine by differential scanning calorimetry (DSC), Raman spectroscopy, electron paramagnetic resonance (EPR) spectroscopy, optical absorption, and photoluminescence (PL) spectroscopy. DSC characterization showed consistent glass transition temperatures (T g ) before and after γ-irradiation whereas the crystallization temperatures tended to decrease with increasing γ-ray dose. However, a lack of alteration of the glass network structure was supported by Raman spectroscopy. Room temperature EPR spectra clearly showed the formation of phosphorus oxygen hole center (POHC) defects in the undoped host, in addition to another doublet likely associated with a P 3 defect. The presence of paramagnetic silver species encompassing Ag 2+ and 107/109 Ag 0 atoms was also indicated in the silver-activated glass together with POHC defects. Optical absorption spectra were also consistent with the presence of various radiation-induced centers. Further analyzing the glass absorption edge via Tauc plots suggested the formation of electron center (EC) defects in γ-irradiated samples wherein the silver-doped glass exhibited decreasing band gap energies with increasing γ-ray dose. The PL characterization showed the silver-related radio-PL effect was induced exhibiting broad band emission with two maxima around 500 and 625 nm stemming from various molecular Ag$^{x+}_{n}$ clusters. Emission decay analyses revealed that the longer wavelength emission exhibited slower decay. The highest radiation dose of 100 kGy however resulted in weaker emission and faster decay kinetics attributed to energy transfer between the luminescent silver species and POHC defects. Finally subjecting the γ-irradiated Ag-doped glasses to heat treatment near the T g at 490 °C led to the development of the surface plasmon resonance of Ag nanoparticles (NPs) and the vanishing of the Ag$^{x+}_{n}$ clusters luminescence. In conclusion, the presence of the matrix-related EC defects was deemed accountable for the thermally induced reduction and consequent precipitation of Ag NPs making the plasmonic glasses attractive for photonic applications such as nonlinear optics.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Understanding the Hydronium Cation in the Solid State: A Study in Synthetic Hydronium Uranyl Phosphate and Arsenate Mineral Systems and Their Irradiation Stability

Here, we present neutron diffraction, electronic structure calculations, and optical vibrational spectroscopic characterization of hydronium uranyl phosphate (HUP), the synthetic analog of chernikovite ((H 3 O)(UO 2 )(PO 4 )·3H 2 O) to gain insight into structural features of the hydronium cation in the solid state. HUP crystallizes in P2 1 /c instead of previously reported P4/ncc 1 at room temperature and Pccn below 302 K. Lower symmetry was required due to hydronium and interstitial water positions within the structure. Crystallographic positions of hydronium cations determined from powder neutron diffraction data are bolstered by Raman and attenuated total reflectance infrared spectroscopic measurements and are further informed by density functional theory with phonon eigenvector analysis for spectral assignments. Finally, HUP and its arsenate analog (trogerite, (H 3 O)(UO 2 )(AsO 4 )·3H 2 O), (HUAs) were studied using He 2+ irradiation as an analog for α radiolysis to investigate the irradiation stability of these phases and the stability of hydronium cations in the solid state. Dose studies were employed wherein each sample was irradiated to 5, 10, 15, 25, and 50 MGy. Structural insight regarding irradiated materials is gained using optical vibrational spectroscopy and powder X-ray diffraction. Surprising irradiation stability of HUAs was found up to 50 MGy of dose, which may have important implications for understanding and modeling the geologic stability of legacy U.

actinides↗