Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHOSPHATE MINERALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Spectroscopic Approaches for Phosphorus Speciation in Soils and other Environmental Systems

In the past decades, environmental scientists have become increasingly involved in developing novel approaches for applying emerging spectroscopic techniques to complex environmental matrices. The objective of this review is to convey the most common chemical species of phosphorus reported for soils, sediments, model systems, and waste materials based on analyses by four spectroscopic techniques: X-ray absorption near-edge structure, nuclear magnetic resonance, Fourier transform infrared spectroscopy, and Raman spectroscopy. Unique information is provided by each technique at a level of specificity that depends in part on matrix complexity. The X-ray absorption near-edge structure and nuclear magnetic resonance techniques reveal inorganic and organic P species in intact environmental matrices or in chemical extracts, whereas the Fourier transform infrared and Raman techniques can provide more specific bonding information about mineral or adsorbed P species in model analogs of matrix components. The most common P species in soils and sediments as indicated by spectroscopy are hydroxyapatite and octacalcium phosphate minerals, phosphate adsorbed on Fe- and Al-oxides, pyrophosphates and polyphosphates, phosphate mono- and di-esters, and phosphonates. Continued advancements in spectroscopic methods should improve speciation-based models of P mobilization and transformations in the environment.

54 ENVIRONMENTAL SCIENCES↗

Effect of Phosphate on U(VI) Sorption to Montmorillonite: Ternary Complexation and Precipitation Barriers

Phosphate addition is a potential treatment method to lower the solubility of U(VI) in soil and groundwater systems by causing U(VI) phosphate precipitation as well as enhancing adsorption. Previous work has shown that iron oxide surfaces may facilitate the nucleation of U(VI) phosphate minerals and, that under weakly acidic conditions, phosphate also enhances U(VI) adsorption to such phases. Like iron oxides, clays are important reactive phases in the subsurface but little is known about the interaction of U(VI) and phosphate with these minerals. The effect of aqueous phosphate on U(VI) binding to Wyoming montmorillonite (SWy-2) in air-equilibrated systems was investigated. Equilibrium U(VI) uptake to montmorillonite was determined at pH 4, 6 and 8 at discrete initial phosphate concentrations between 0 and 100 μM. The observed behavior of U(VI) indicates a transition from adsorption to precipitation with increasing total uranium and phosphate concentrations at all pH values. At the highest phosphate concentration examined at each pH value, a barrier to U(VI) phosphate nucleation is observed. At lower concentrations, phosphate has no effect on macroscopic U(VI) adsorption. To assess the mechanisms of U(VI)-phosphate interactions on smectite surfaces, U(VI) speciation was investigated under selected conditions using laser-induced fluorescence spectroscopy (LIFS) and extended X-ray absorption fine-structure (EXAFS) spectroscopy. Samples above the precipitation threshold display EXAFS and LIFS spectral signatures consistent with the autunite family of U(VI) phosphate minerals. However, at lower U(VI) concentrations, changes in LIFS spectra upon phosphate addition suggest that U(VI)-phosphate ternary surface complexes form on the montmorillonite surface at pH 4 and 6 despite the lack of a macroscopic effect on adsorption. The speciation of solid-associated U(VI) below the precipitation threshold at pH 8 is dominated by U(VI)-carbonate surface complexes. This work reveals that ternary complexation may occur without a macroscopic signature, which is attributed to phosphate not appreciably binding to smectite in the absence of U(VI), with U(VI) surface complexes serving as the sole reactive surface sites for phosphate. This study shows that phosphate does not enhance U(VI) adsorption to smectite clay minerals, unlike oxide phases, and that a barrier to homogeneous nucleation of U(VI) phosphates was not affected by the presence of the smectite surface

Environmental Molecular Sciences Laboratory↗

Complementary effects of multi-protein components on biomineralization in vitro

The extracellular matrix (ECM) is composed of mixed protein fibers whose precise composition affects biomineralization. New methods are needed to probe the interactions of these proteins with calcium phosphate mineral and with each other. Here we follow calcium phosphate mineralization on protein fibers self-assembled in vitro from solutions of fibronectin, elastin and their mixture. We probe the surface morphology and mechanical properties of the protein fibers during the early stages. The development of mineral crystals on the protein matrices is also investigated. In physiological mineralization solution, the elastic modulus of the fibers in the fibronectin-elastin mixture increases to a greater extent than that of the fibers from either pure protein. In the presence of fibronectin, longer exposure in the mineral solution leads to the formation of amorphous calcium phosphate particles templated along the self-assembled fibers, while elastin fibers only collect calcium without any mineral observed during early stage. TEM images confirm that small needle-shape crystals are confined inside elastin fibers which suppress the release of mineral outside the fibers during late stage, while hydroxyapatite crystals form when fibronectin is present. These results demonstrate complementary actions of the two ECM proteins fibronectin and elastin to collect cations and template mineral, respectively.

36 MATERIALS SCIENCE↗

The Effect of Bicarbonate on Autunite Dissolution in the Presence of Shewanella oneidensis under Oxygen Restricted Conditions - 16429

Uranium is a key contaminant at many U.S. Department of Energy sites that served a leading role in the nation's defense for over 50 years. Uranium contamination of soil and groundwater is of great environmental concern due to the toxicological properties of the uranyl species. In an effort to decrease the concentration of soluble uranium, tripolyphosphate injections were identified as a feasible remediation strategy for sequestering uranium in situ in contaminated groundwater at the Hanford Site (WA). The introduction of sodium tripolyphosphate into uranium-bearing porous media results in the formation of uranyl phosphate minerals (autunite) of general formula (X{sub 1-2}[(UO{sub 2})(PO{sub 4})]{sub 2-1}.nH{sub 2}O), where X is a monovalent or divalent cation. The stability of the uranyl phosphate minerals in the subsurface is a critical factor since it determines the long-term effectiveness of the sodium tripolyphosphate injection as a remediation strategy. The behavior of uranium and its mobility in the subsurface are affected by various factors such as the chemistry of pore water, groundwater and soil minerals, the presence of complex-forming ligands, and micro-organisms that thrive under these conditions. Bicarbonate presence in the aqueous phase facilitates uranium desorption from soil and sediments and promotes the release of U(VI) into the aqueous phase, thus increasing uranium mobility in natural waters. In neutral or basic pH conditions, uranium can readily complex with a wide variety of ligands such as carbonate and form soluble uranyl-carbonato complexes such as UO{sub 2}(CO{sub 3}){sub 2}{sup 2-} and UO{sub 2}(CO{sub 3}){sub 3}{sup 4-}. Bicarbonate complexes have been identified in contaminated pore water at the Hanford Site. Furthermore, the presence of bacteria can significantly affect uranium mobility since bacteria may bio-enhance the release of U (VI) from uranyl-phosphate minerals, thus liberating uranium in the aqueous phase in an effort to obtain phosphorous, a vital nutrient for their metabolism. The Columbia River at the site exhibits large stage variations, causing fluctuations in the water table. These water table fluctuations and multiple rise-and-fall cycles in the river created an oxic-anoxic interface in this region. Previous assessments of Hanford sediment samples collected from this area noted a decline in cultivable aerobic bacteria and suggested the presence of facultative anaerobic bacteria. Shewanella oneidensis MR1 is a common bacterial group in soils and Shewanella species have been found in the Hanford soil. Shewanella oneidensis is a facultative anaerobic species which also belongs to a group known as dissimilatory metal-reducing bacteria (DMRB), due to their ability to reduce metals as a part of their metabolic pathway. Therefore, understanding the role of Shewanella is a critical factor affecting the outcome of environmental remediation. The objective of this research was to demonstrate the significance of bacteria-uranium interactions and investigate the effect of bicarbonate in the aqueous phase on Ca-autunite dissolution in the oxygen-restricted conditions. Sterile 100-mL glass mixed bioreactors with weighed amounts of ground Ca-autunite particles were used for initial experimentation. These autunite-containing bioreactors were injected with bacterial cells after the autunite equilibrated with the media solution amended with 0 mM, 3 mM 5 mM and 10 mM concentrations of bicarbonate. Additional abiotic samples were prepared without bacterial inoculation to provide a control for the biotic samples. The concentration of U(VI) determined in the aqueous phase was in direct correlation to the concentration of bicarbonate present in the solution. It was noted that an increase in bicarbonate concentration led to higher U(VI) concentration in the aqueous phase. A sharp decrease in U(VI) concentration was observed in the bicarbonate-free samples, probably due to a microbe mediated reduction of U(VI) to U(IV). In the case of samples amended with 3 mM bicarbonate, a slight, yet significant, decrease in U(VI) was also observed compared to the abiotic control. However, compared to the abiotic controls, there was no change in U(VI) levels in the aqueous phase as a result of bacterial inoculation for the samples amended with 5 and 10 mM bicarbonate for a period of time as long as 50 days. These results imply that the uranyl-carbonate complexes (UO{sub 2}(CO{sub 3}){sub 2}{sup 2-} and UO{sub 2}(CO{sub 3}){sub 3}{sup 4-}) that are present in carbonate-rich environments might be interfering with the microbial reduction in the oxygen- restricted conditions; however, this conclusion requires further investigation. Finally, the data indicate that release of U, P and Ca from autunite was non-stoichiometric. In conclusion, the high stability of uranyl-phosphate complexes makes them a strong candidate for the remediation efforts to sequester uranium in the subsurface. Nevertheless, in a bicarbonate-rich environment, Ca-autunite has a high probability of dissolution and the presence of metal-reducing bacteria does not seem to impede this process in the presence of higher bicarbonate concentrations under oxygen restricted conditions. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Uranium Biomineralization By Natural Microbial Phosphatase Activities in the Subsurface

This project investigated the geochemical and microbial processes associated with the biomineralization of radionuclides in subsurface soils. During this study, it was determined that microbial communities from the Oak Ridge Field Research subsurface are able to express phosphatase activities that hydrolyze exogenous organophosphate compounds and result in the non-reductive bioimmobilization of U(VI) phosphate minerals in both aerobic and anaerobic conditions. The changes of the microbial community structure associated with the biomineralization of U(VI) was determined to identify the main organisms involved in the biomineralization process, and the complete genome of two isolates was sequenced. In addition, it was determined that both phytate, the main source of natural organophosphate compounds in natural environments, and polyphosphate accumulated in cells could also be hydrolyzed by native microbial population to liberate enough orthophosphate and precipitate uranium phosphate minerals. Finally, the minerals produced during this process are stable in low pH conditions or environments where the production of dissolved inorganic carbon is moderate. These findings suggest that the biomineralization of U(VI) phosphate minerals is an attractive bioremediation strategy to uranium bioreduction in low pH uranium-contaminated environments. These efforts support the goals of the SBR long-term performance measure by providing key information on "biological processes influencing the form and mobility of DOE contaminants in the subsurface".

54 ENVIRONMENTAL SCIENCES↗

Evaluation of the Change in Uranium Mobility in Sediments from the Hanford 300-FF-5 Stage B Polyphosphate Field Injection

The purpose of this study was to evaluate the change in uranium mobility in the periodically re-wetted zone (PRZ) and upper unconfined aquifer of the Hanford Site’s 300-FF-5 operable unit as a result of Stage B polyphosphate (PO 4 ) injections. These 300 Area sediments are beneath or near the former North Process Pond, which has previously been shown to contain metatorbernite [Cu(UO 2 ) 2 (PO 4 ) 2 •8H 2 O] and uranophane [Ca(UO 2 ) 2 (SiO 3 OH) 2 •5H 2 O], along with aqueous and adsorbed uranium (U), and small amounts of U in calcite as a result of acidic disposal with a significant number of co-contaminants. Previous laboratory-scale studies have identified multiple mechanisms that decrease uranium mobility with polyphosphate injection: (a) precipitation of a low-solubility uranium-phosphate mineral (autunite); (b) precipitation of a Ca-phosphate solid that incorporates U; (c) precipitation of Ca-phosphate mineral (apatite group minerals) that coats existing uranium phases (i.e., U in calcite, U in Fe-oxides), reducing uranium leaching; and (d) aqueous Ca-U-carbonate species adsorption onto apatite. Given the significant amount of apatite precipitation, other U phases such as carbonates could also coprecipitate with apatite. To quantify differences in solubility, leachability, and phases of uranium between pre- and post-PO 4 -treated sediments, different types of analyses were conducted, including analysis of uranium in (a) a carbonate solution extraction from sediment over 1000 h (41.67 days), (b) six sequential liquid extractions from sediment over approximately 1 week, (c) leaching of uranium from sediments in one dimensional (1-D) column experiments over 2 months, and (d) solid phase characterization of select sediments. An additional extraction and solid phase measurements were conducted to evaluate phosphate precipitate formation. Metals were also analyzed in sequential liquid extractions as indicators of (a) amendment injection delivery, (b) co-contaminant movement, and (c) changes in solid phases. Aqueous and solid phase carbonate measurements were also conducted to evaluate changes in carbonates.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Petro-mineralogical Studies of the Paleoproterozoic Phosphorites in the Sonrai basin, Lalitpur District, Uttar Pradesh, India

The Paleoproterozoic phosphorites constitute an economically significant component of the Sonrai basin of Lalitpur district. These are associated with ferruginous shale, ironstone, limestone and quartz breccia. Petro-mineralogical studies of samples of the phosphorites, using X-ray diffractometry and scanning electron microscopy, reveal that the collophane (carbonate-fluorapatite) is the dominant phosphate mineral. Calcite, dolomite, quartz, mica and haematite are the dominant gangue constituents. The phosphate minerals occur as oolites mutually replaced by carbonate and silica. The presence of iron oxides has been found in most of the thin sections. There is meagre evidence of organic matter in the form of filaments of microbial phosphate laminae in the samples of phosphorite. The mineral assemblages, their texture and various forms in these phosphorites may be due to some environmental vicissitudes followed by replacement processes and biogenic activities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phosphorus Equilibria Among Mafic Silicate Phases

Phosphorus incorporation in major rock-forming silicate minerals has the following implications: (1) Reactions between phosphorus-hosting major silicates and accessory phosphates, which are also major trace element carriers, may control the stability of the latter and thus may affect the amount of phosphorus and other trace elements released to the coexisting melt or fluid phase. (2) Less of a phosphate mineral is needed to account for the bulk phosphorus of planetaty mantles. (3) During partial melting of mantle mineral assemblages or equilibrium fractional crystallization of basaltic magmas, and in the absence or prior to saturation with a phosphate mineral, silicate melts may become enriched in phosphorus, especially in the geochemically important low melt fraction regime, Although the small differences in the ionic radii of IVp5+, IVSi4+, and IV Al3+ makes phosphoms incorporation into crystalline silicates perhaps unsurprising, isostructural silicate and phosphate crystalline solids do not readily form solutions, e.g., (Fe, Mg)2SiO4 vs. LiMgPO4, SiO)2 VS. AlPO4. Nonetheless, there are reports of, poorly characterized silico-phosphate phases in angrites , 2-4 wt% P2O5 in olivine and pyroxene grains in pallasites and reduced terestrial basalts which are little understood but potentially useful, and up to 17 wt% P2O5 in olivine from ancient slags. However, such enrichments are rare and only underscore the likelihood of phosphoms incorporation in silicate minerals. The mechanisms that allow phosphorus to enter major rock-forming silicate minerals (e.g., Oliv, Px, Gt) remain little understood and the relevant data base is limited. Nonetheless, old and new high-pressure (5-10 GPa) experimental data suggest that P2O5 wt% decreases from silica-poor to silica-rich compositions or from orthosilicate to chain silicate structures (garnet > olivine > orthopyroxene) which implies that phosphorus incorporation in silicates is perhaps more structure-than site-specific. The data also indicate that DXVliQP2O5 decrease in the same order, but DOVLiQP2O5 and DOpx/LiQP205 are likely constant, respectively equal to 0.08(3) and 0.007(4), in contrast, DG1ILiQP205 increases from 0.15(3) to 0.36(10) as garnet becomes majoritic, thus silica-enriched, and may also depend on liquid composition (SiO2, P2O5 and Na2O wt%).

Berlin, Jana↗

Abundant phosphorus expected for possible life in Enceladus’s ocean

Saturn’s moon Enceladus has a potentially habitable subsurface water ocean that contains canonical building blocks of life (organic and inorganic carbon, ammonia, possibly hydro-gen sulfide) and chemical energy (disequilibria for methanogenesis). However, its habit-ability could be strongly affected by the unknown availability of phosphorus (P). Here, we perform thermodynamic and kinetic modeling that simulates P geochemistry based on recent insights into the geochemistry of the ocean–seafloor system on Enceladus. We find that aqueous P should predominantly exist as orthophosphate (e.g., HPO422), and total dissolved inorganic P could reach 1027to 1022mol/kg H2O, generally increasing with lower pH and higher dissolved CO2, but also depending upon dissolved ammonia and silica. Levels are much higher than<10210mol/kg H2Ofrompreviousestimatesand close to or higher than∼1026mol/kg H2O in modern Earth seawater. The high P concentration is primarily ascribed to a high (bi)carbonate concentration, which decreases the concentrations of multivalent cations via carbonate mineral formation, allowing phosphate to accumulate. Kinetic modeling of phosphate mineral dissolution suggests that geologically rapid release of P from seafloor weathering of a chondritic rocky core could supply millimoles of total dissolved P per kilogram of H2Owithin105y, much less than the likely age of Enceladus’s ocean (108to 109y). These results provide further evidence of habitable ocean conditions and show that any oceanic life would not be inhibited by low P availability.

Enceladus ocean↗

Polyphosphate Amendments for In-Situ Remediation of Uranium

Environmental contamination of surface and subsurface geologic media by uranium is a lasting legacy of past operations related to nuclear energy and weapons production. Operations conducted at United States Department of Energy (DOE) and Department of Defense (DOD) sites including research activities, nuclear fuel processing, weapons development and testing, construction of nuclear energy reactors, and waste management have resulted significant surface and subsurface contamination of geologic media by heavy metals and radionuclides. Despite several decades of studies, effective uranium remediation strategies remain elusive for contamination in deep subsurface settings that prevail in the western United States. Polyphosphate technology has been demonstrated to delay the precipitation of phosphate phases for controlled in situ precipitation of stabile phosphate phases to control the long-term fate of uranium. Precipitation of phosphate minerals occurs when phosphate compounds undergo hydrolysis to yield orthophosphate. Accordingly, a detailed understanding of polyphosphate degradation and reaction kinetics, in the context of site specific information, allows the technology to be tailored as a time-released source of phosphate for subsurface treatment. Results of 1) a labortory testing program, providing a detailed understanding of the fundamental underpinnings necessary to evaluate the efficacy and potential use of polyphosphate technology for implementation through a field-scale demonstration, 2) field-scale injection into the aquifer demonstrating a reduction in the concentration of aqueous uranium and presenting field-scale challenges to implementation, and 3) infiltration into the vadose zone and capillary fringe stabilizing the inventory of uranium and mitigating a portion of the persistent flux of uranium to the aquifer will be presented. The data from field-scale demonstrations provide valuable information for designing a full-scale remediation of uranium within the 300 Area of the Hanford Site. Moreover, this study presents the fundamental information necessary to evaluate the efficacy and potential utilization of polyphosphate technology at other sites with varying geochemical and hydrodynamic conditions.

Environmental Molecular Sciences Laboratory↗

Variations in Apatite F, Cl, and OH Abundances in Primitive Achondrites: Evidence of Fractional Melting?

The apatite group minerals [Ca 5 (PO 4 ) 3 (F,Cl,OH)] are some of the primary mineralogical reservoirs for phosphorus on Earth and a common phosphate mineral within a broad range of extraterrestrial samples. Naturally occurring apatite hosts F, Cl, and OH as essential structural constituents, and all three make up the apatite endmembers fluorapatite, chlorapatite, and hydroxylapatite, respectively. Although apatite is one of the most common phosphate minerals in meteorites and rocks from Earth, it typically occurs at minor to trace abundances. Apatite has been widely used as a mineralogical tool to probe the interiors of both differentiated and undifferentiated parent bodies for information about volatiles; however, little work has been done on apatite F, Cl, and OH abundances of apatite from primitive achondrite meteorites. There are broad differences between apatite X -site chemistry in chondrite parent bodies (typically F-poor) compared to apatite from basaltic rocks from many achondrite parent bodies (Cl-poor, apart from Mars). These differences could indicate that planetary differentiation processes, namely melting, play an important role in the evolution of apatite X -site chemistry. In fact, some ordinary chondrite meteorites that exhibit evidence of minor impact melting have apatite with X -site compositions that are much more F-rich than typical chondrite apatite. McCubbin et al., hypothesized that the F-rich compositions of the apatite in ordinary chondrites affected by impact melting could be the result of apatite partially melting, driving the residual apatite to more F-rich compositions; however, they also indicated that degassing of the more volatile Cl and H may also contribute to the F-enrichment. To further test the partial melting hypothesis, we investigate the F, Cl, and OH (by difference) abundances of apatite from primitive achondrite parent bodies given that they are thought to come from partially differentiated parent bodies that represent residues after partial melting. Consequently, their apatites could provide valuable insights into the effects of melting on apatite X -site chemistry. In this study, we report F and Cl abundances of apatite from a broad array of primitive achondrite meteorites, and we develop a model for apatite fractional melting using known apatite-melt partitioning relationships. Together, we use these results to further elucidate the role of melting on apatite X -site compositions.

F M McCubbin↗

Insights into the Oxidation Mechanism of Vivianite to Metavivianite from First-Principles Calculations

Vivianite, a hydrous ferrous iron-phosphate mineral (Fe 3 (PO 4 ) 2 ·8H 2 O), readily oxidizes in contact with air yielding the less hydrous mixed-valent iron-phosphate mineral metavivianite. This topotactic transformation nominally occurs by oxidative dehydrogenation in which outgoing electrons from the iron sublattice are charge compensated by hydrolysis of structural water. However, the details of this internal charge balancing mechanism that allows the structure to remain electrostatically stable remain unknown. Here, in this study, we use density functional theory (DFT) calculations and ab initio thermodynamics (AIT) to evaluate the energetics of this process in terms of hydrogen release as a function of environmental variables such as partial pressure and temperature. The results show a thermodynamic driving force for vivianite phase transformation as oxidation progresses that is triggered by its rigid structure that has a limited accommodation for hydrogen vacancies. In contrast, metavivianite has a more flexible lattice and hydrogen bond network that stabilizes these hydrogen defects. Metavivianite is shown to be a stable intermediate for 66% residual Fe 2+ down to 33% Fe 2+ , below which other phases/structures such as santabarbarite should be more thermodynamically favorable. Our study provides a basis for experimental tests of our mechanistic findings and helps fill a basic knowledge gap about the solid-state process that defines how vivianite interacts with its surrounding environment.

Sassi, Michel [Pacific Northwest National Laborato↗

Recognizing the Effects of Terrestrial Contamination on D/H Ratios in Shergottite Phosphates

Hydrogen isotope ratios in shergottite phosphate minerals have been investigated by SIMS in the meteorites Queen Alexandra Range (QUE) 94201 and Los Angeles. We have also collected electron probe data on these phosphates in order to characterize the phosphate minerals and attempt to document any potential hydrogen isotopic differences between chlor-apatite and whitlockite. In the section of Los Angeles we studied (748), we found both chlor-apatite and whitlockite, but in the section of QUE 94201,38 studied, we found only whitlockite. In both meteorites, D/H ratios (expressed in units of delta D (sub SMOW) vary, from terrestrial values up to approximately 5400%o in QUE 94201, and to approximately 3800%o in Los Angeles. We have carefully examined the ion probed pits with high-resolution FE-SEM. In most cases where the D/H ratios are low, we have iden-tified cracks that instersect the ion probe pit. These cracks are not visible in the optical microscope attached to the SIMS instument, making them impossible to avoid during SIMS data collection. We contend that the low ratios are a function of substantial terrestrial contamination, and that similar contamination is a likely factor in previously published studies on D/H ratios in martian phosphates. Here we highlight the difficulty of attempts to constrain the martian mantle D/H ratio using phosphate data, given that both terrestrial contamination and martian mantle hydrogen will move phosphate D/H ratios in the same direction, toward lower values. We note that our data include some of the most deuterium-rich values ever reported for martian phosphates. It is clear that some of our measurements are only minimally or totally uncontaminated, but the question arises, are intermediate values diminished because of true martian variability, or do they reflect contamination?

Ross, D. K.↗

Changes in the C-terminal, N-terminal, and histidine regions of amelogenin reveal the role of oligomer quaternary structure on adsorption and hydroxyapatite mineralization

Adsorption interactions between amelogenin and calcium phosphate minerals are believed to be important to amelogenin’s function in enamel formation, however, the role of specific amino acid residues and domains within the protein in controlling adsorption is not well known. We synthesized “mechanistic probes” by systematically removing charged regions of amelogenin in order to elucidate their roles. The probes included amelogenin without the charged residues in the N-terminus (SEKR), without two, three, or eight histidines (H) in the central protein region (H2, H3, H8), or without the C-terminal residues (Delta). In-situ atomic force microscopy (AFM) adsorption studies onto hydroxyapatite (HAP) single crystals confirmed that the C-terminus was the dominant domain in promoting adsorption. We propose that subtle changes in protein-protein interactions for proteins with histidines and N-terminal residues removed resulted in changes in the oligomer quaternary size and structure that also affected protein adsorption. HAP mineralization studies revealed that the oligomer-HAP binding energy and protein layer thickness were factors in controlling the amorphous calcium phosphate (ACP) to HAP induction time. Our studies with mechanistic probes reveal the importance of the oligomer quaternary structure in controlling amelogenin adsorption and HAP mineralization.

59 BASIC BIOLOGICAL SCIENCES↗

4.32 Billion Year Old Impact Melts at Apollo 14: Dating the Procellarum Basin?

Introduction: Recent work has improved our understanding of lunar crustal structure and basin evolution on the Moon, but its early impact history and implications for solar system dynamics remain poorly established [1,2]. In particular, there is a derth of absolute ages, especially for the period >4.0 Ga, that could be related to basin-forming events. Here we present U-Pb isotopic data for Zr-rich minerals found in impact-melt fragments from Apollo 14 soil sample 14163 that, when combined with previously published data, dates an impact event at 4324±15 Ma. The compositions and ages of these impact-melt fragments provide unique information about the timing of early impact events and the composition of the lunar crust. Results: Fourteen rocklets ranging in size from 1 to 3 mm were extracted from soil 14163. Most are impactmelt rocks with 10-30% clasts of mostly pyroxene and plagioclase (100 to 500 μm) in a crystalline matrix. Textures of the matrix vary from subophitic, formed by intergrowths of 10-20 μm plagioclase and pyroxene crystals, to poikilitic, with plagioclase and pyroxene reaching 20-50 μm size. Some fragments that contain no visible clasts have similar textures are also interpreted as impact-melt rocks. All fragments contain notably large proportions of euhedral to subhedral ilmenite, zircon, apatite/merrillite and less abundant zirconolite and baddeleyite in the melt matrices. These grains often form intricate intergrowths with each other and rock-forming minerals, indicating their crystallization from the melt (Fig. 1). However, some slightly larger (~50 μm) zircon and phosphate grains can be interpreted as relict clasts based on their granular textures and relationships with the surrounding phases (Fig. 1). This implies that zircon and phosphate minerals were present in the target rocks. Some of these grains were profoundly remelted during the impact, which resulted in an oversaturation of the melt in Zr and P and crystallization of new grains of Zrrich minerals and phosphates during melt solidification. The presence of zircon and phosphates indicates that the melts were significantly enriched in KREEP components and ties their provenance to the Procellarum- KREEP Terrane (PKT) [3]. Combined U-Pb zircon data obtained for all fragments form two main clusters on a concordia diagram (Fig. 2), between about 4.3 and 3.9 Ga. Phosphate data mostly concentrate on the younger end of this age range but some analyses are almost as old as the older zircon grains (Fig. 2). Figure 1: Zircon (Zr) and phosphate (Apt; Mer) grains in impact melt fragments from Apollo 14 soil 14161. A-zircon grains crystallized from impact melt; B-phosphate grain inherited from the target; C- granular zircon grains Our interpretation of these data is that all U-rich minerals experienced variable resetting of the U-Pb system, with phosphate, where closure temperature is significantly lower than that in zircon, affected more profoundly by Pb loss than zircon. Our best estimate of the time of formation of zircon and phosphate is based on statistically valid analysis of grains interpreted texturally as grown from the impact melt (Fig. 2). Ten of these analyses define an age of 4324±15 Ma (MSWD=3.0, probability of fit P=0.002). Our best estimate for the time of resetting is obtained by combining data from phosphates that are statistically indistinguishable from 3.9 Ga within the analytical uncertainties. This group is represented by 18 analyses of 15 phosphate grains from different fragments (Fig. 2) and defines an age of 3922±6 Ma (MSWD=1.2, P=0.23). Conversely, a minimum age of the target lithologies, remelted in the impact that produced the rocklets studied here (Fig. 2), can be determined from the five oldest analyses of zircon clasts at 4338±13 Ma (MSWD=1.5, P=0.2), which is indistinguishable from the age of the impact melt within the uncertainties. The obtained ages, combined with textural evidence, imply that the impact melt was formed at 4324±15 Ma, and that it occurred in a zircon-rich target with a minimum age of 4338±13 Ma. Further reworking occurred during a second impact event at 3922±6 Ma. Discussion: The younger age of 3922±6 Ma can be interpreted as the time of the Imbrium impact. The older age of 4324±15 Ma would then be the time of formation of the impact melt, which was then caught in the Imbrium ejecta either at the Apollo 14 landing site or within the target rocks of the Imbrium impact. The presence of abundant accessory phases such as zircons and phosphates is consistent with a substantial KREEP component in the analyzed particles. The current distribution of KREEP on the lunar surface appears to be strongly influenced by Imbrum ejecta [4] so interpretation of the 4.32 Ga age depends in part on assumed structure of the pre-impact crust and distribution of KREEP within the crust. If KREEP was present only in the deep crust at 4.32 Ga, then a basin-scale impact possibly analogous to Imbrium or larger may be necessary to excavate a KREEPy impact melt at this time. However, if KREEPy materials were present closer to the surface perhaps due to redistribution related to Mg-suite magmatism, then smaller impacts might be able to rework KREEPy compositions at shallower depths. The coherence of the data on the particles analysed here suggests a large volume of melt that has been preserved since 4.32 Ga, consistent with a large impact event. Relict zircons and mineral clasts suggests that the igneous crust in the vicinity of this impact was well developed by at least 4.34 Ga, similar to the model age of KREEP and older than the isochron ages of many Mg-suite cumulates [5]. A problem that confronts all lunar sample studies using the current collection is that the pre-Imbrium geology of the PKT (the source of these 4.32 Ga impact melts) is not well constrained. The South Pole-Aitken basin contains regions that are moderately enriched in Th, but its ejecta is Th-poor [6]; therefore these A14 fragments are probably not SPA ejecta. Alternatively, these fragments may represent formation of a hypothesized Procellarum basin [7] although the lack of a clearly defined basin ejecta signature is a potential problem with that interpretation. In any case, they provide a younger limit on the age of lunar differentiation and formation of KREEP within the lunar crust. Figure 2: U-Pb data for zircon and phosphate grains from impact melt fragments. A-all data; B-data used for age calculations. References: [1] Orgel C., Michael G., Fassett C. I., van der Bogert C. H., Riedel C., Kneissl T., and Hiesinger H. (2018) J. Geophys. Res. Planets 123, 748- 762. [2] Evans A. J., Andrews-Hanna J. C., Head J. W., Soderblom J. M., Solomon S. C., and Zuber M. T. (2018) J. Geophys. Planets. 123, 1596-1617. [3] Jolliff, B.L., Gillis, J.J., Haskin, L.A., Korotev, R.L. and Wieczorek, M.A. (2000) J. Geophys. Res: Planets 105, 4197-4216. [4] Haskin L. A. (1998) J. Geophys. Res. Planets 103, 1679-1689. [5] Borg L.E., Gaffney A.M., and Shearer C.K. (2015) MAPS 50, 715-732. [6] Moriarty, D.P., Watkins, R.N., Valencia, S.N., Kendall, J.D., Evans, A.J., Dygert, N. and Petro, N.E. (2021) J. Geophys. Res. Planets 126. [7] Zhu, M.H., Wünnemann, K., Potter, R.W., Kleine, T. and Morbidelli, A. (2019) J. Geophys. Res: Planets 124, 2117-2140

M D Norman↗

Evaluation of Reagent Emplacement Techniques for Phosphate-based Treatment of the Uranium Contamination Source in the 300 Area White Paper

Persistent uranium contamination of groundwater under the 300 Area of the Hanford Site has been observed. The source of the uranium contamination resides in uranium deposits on sediments at the groundwater interface, and the contamination is mobilized when periodically wetted by fluctuations of Columbia River levels. Treatability work is ongoing to develop and apply phosphate-containing reagents to promote the formation of stable and insoluble uranium phosphate minerals (i.e., autunite) and other phosphate precipitates (di-calcium phosphate, apatite) to stabilize the uranium source. Technologies for applying phosphate-containing reagents by vertical percolation and lateral injection into sediments of the periodically wetted groundwater interface are being investigated. This report is a preliminary evaluation of technologies for lateral injection.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗