Space related biological and instrumentation studies Annual report, Mar. 1970 - Mar. 1971
Pressure sensors, blood flow transducers, pH electrodes, and photographic recording of biological data for use in aerospace medicine
Gibson, R. J.↗
SEARCH · Search NASA
Results for “PHOTOGRAPHIC RECORDING INSTRUMENT”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Television camera as a scientific instrument
Rigorous calibration program, coupled with a sophisticated data-processing program that introduced compensation for system response to correct photometry, geometric linearity, and resolution, converted a television camera to a quantitative measuring instrument. The output data are in the forms of both numeric printout records and photographs.
Smokler, M. I.↗
Rocket engine vibration accurately measured by photography
High speed instrumentation camera focused on a partially masked light bulb which is securely mounted to the test fixture permits measurement of engine performance parameters when usual electronic vibration instrumentation is unavailable. Vibration is recorded as a light trace deviating from the light rays photographed in the static hardware condition.
Craig, K. A.↗
Comet Halley: The Curtis Schmidts-Isla de Pascua observations
Halley's comet plasma tail disturbances and attendant tail phenomena were observed. Nearly simultaneous exposures with two telescopes serve to correlate information obtained with the two instruments. Photographs of 14 pre-Halley comets taken on 54 nights were examined with a view to cross-interpretation of phenomena seen in Halley with the earlier comets, as recorded on a homogenous collection of plates taken with the same instrument. The tail of Halley was highly active. This contrasts sharply with pre-Halley comets where undisturbed tails are the rule. During March and April, disturbances appeared in the tail of Halley at an average of 1 new distrubance every 3.7 days. It is considered that 10 of the 11 observed disturbances had common characteristics which allow them to be characterized as disconnections.
Miller, Freeman D.↗
Experimental study of transient liquid motion in orbiting spacecraft
The results are presented of a twofold study of transient liquid motion such as that which will be experienced during orbital maneuvers by space tug. A test program was conducted in a low-g test facility involving twenty-two drops. Biaxial, low-g accelerations were applied to an instrumented, model propellant tank during free-fall testing, and forces exerted during liquid reorientation were measured and recorded. Photographic records of the liquid reorientation were also made. The test data were used to verify a mechanical analog which portrays the liquid as a point mass moving on an ellipsoidal constraint surface. The mechanical analog was coded into a FORTRAN IV digital computer program: LAMPS, Large AMPlitude Slosh. Test/analytical correlation indicates that the mechanical analog is capable of predicting the overall force trends measured during testing.
Berry, R. L.↗
Apollo command module land impact tests
Full-scale-model and actual spacecraft were impact tested to define the emergency land-landing capability of the Apollo command module. Structural accelerations and strains were recorded on analog instrumentation, and a summary to these data is included. The landing kinematics were obtained from high-speed photography. Photographs of the structural damage caused during the tests are included. Even though extensive damage can be expected, the crew will receive nothing more than minor injuries during the majority of the probable landing conditions.
Mccullough, J. E.↗
Skylab multispectral scanner /S-192/ - Optical design and operational imagery
Description of the design and performance of a multispectral scanner that makes possible photographic reproductions of actual flight recordings at an 80-meter resolution for an altitude of 440 km. Maximum scan pattern stability and instrument compactness have been achieved in the design.
Abel, I. R.↗
Far UV camera/spectrograph
In March 1610, Galileo Galilei reported the first use of a telescope to view mountains and maria on the Moon. On April 21, 1972, the Apollo 16 commander pointed a somewhat more complex optical instrument at the Earth from the Moon and obtained several remarkable photographs showing atmospheric rather than surface features. The optical part of the far UV camera (aperture, 7.5 cm) was not much larger than Galileo's telescope. Like his, this instrument was also pointed at other celestial objects that Galileo viewed, including the Milky Way and Jupiter, and the Large Magellanic Cloud (LMC), which is not visible from Italy. More important, the far UV camera/spectrograph recorded light in the invisible band of wavelengths between 50 and 160 nm, approximately one-third the wavelength that can penetrate the atmosphere of the Earth to ground-based telescopes. As described in more detail in this section, these UV observations from the Moon allow study of the entire atmosphere of the Earth and the geocorona. The photographs show hydrogen and other gases in the solar wind and interplanetary media, and they provide new data on stars, nebulae, and galaxies much farther away. When used as a spectrograph, the instrument distributes the light it receives according to wavelength, and the resulting spectrum shows bright lines or gaps known to be characteristic of various gases, such as hydrogen (H), helium (He), oxygen (O), nitrogen (N), and neon (Ne). If a gas cloud is hot, the atoms are excited and the spectrum shows bright emission lines; if it is cool, the atoms absorb light, leaving gaps or absorption lines. The far UV camera is blind to ordinary visible light; for that reason, the photographs show very few of the stars mapped by ground-based telescopes. Only the very-high-temperature (blue) stars of spectral classes O, B, and possibly A (temperatures from 50000 ° down to 10000°K) are expected to be recorded. Image blackness or density on the negatives also depends on the brightness of the star, which astronomers measure in an inverted logarithmic scale of magnitudes. A star of 6 magnitudes (mag.) can barely be seen with the unaided eye. An 11-mag. star is 100 times fainter, and a 12-mag. star is 2.5 times fainter yet. The faintest star recorded by the far UV camera is at least 11 mag., which is called the limiting magnitude.
George R. Carruthers↗
A Simplified Instrument for Recording and Indicating Frequency and Intensity of Icing Conditions Encountered in Flight
An instrument for recording and indicating the frequency and intensity of aircraft icing conditions encountered in flight has been developed by the NACA Lewis Laboratory to obtain statistical icing data over world-wide air routes during routine airline operations. The operation of the instrument is based on the creation of a differential pressure between an ice-free total-pressure system and a total-pressure system in which small total-pressure holes vented to static pressure are allowed to plug with ice accretion. The simplicity of this operating principle permits automatic operation, and provides relative freedom from maintenance and operating problems. The complete unit weighing only 18 pounds records icing rate, airspeed, and altitude on photographic film and provides visual indications of icing intensity to the pilot.
ICE FORMATION↗
A section 110 evaluation of the huron king test chamber, area 3, nevada national security site, nye county, nevada
The U.S. Department of Energy, National Nuclear Security Administration Nevada Field Office tasked Desert Research Institute (DRI) with the identification and evaluation of the Huron King Test Chamber as part of their cultural resources program obligations under Section 110 of the National Historic Preservation Act. The Huron King nuclear test was a vertical line-of-sight weapons effects test that took place in Area 3 on June 24, 1980. Unique to this event was a specially designed aboveground test chamber that held a model defense communications satellite in a vacuum tank meant to replicate the space environment. Sponsored by the Defense Nuclear Agency, the purpose of the experiment was to understand the response of the satellite and its materials and equipment to an electromagnetic pulse and attendant radiation. Between July and August 2022, DRI conducted an archival review on the Huron King experiment and its associated test chamber. Subsequently, pedestrian fieldwork was undertaken at the Huron King Test Chamber by DRI on September 29, 2022. During fieldwork, the outside of the test chamber was documented using a Nevada State Historic Preservation Office Architectural Resource Assessment form. This effort included verifying the substructures that compose the test chamber as determined by the archival review, as well as obtaining a detailed photographic recordation of the exterior and assessing its current condition. Notably, the site where the Huron King test took place has been abandoned and almost entirely naturalized. All of the portable instrumentation trailers, communications and data cabling, and winch systems used to retract the test chamber following the detonation were removed after completion of the experiment in 1980. Only the subsidence crater and the test chamber remain as physical evidence of this experiment. Based on these findings, DRI recommends that the Huron King Test Chamber is eligible for listing in the National Register of Historic Places (NRHP) at the local level under Significance Criteria A and C and that it meets Criteria Consideration G for properties less than 50 years old.
54 ENVIRONMENTAL SCIENCES↗
Experimental study of transient liquid motion in orbiting spacecraft
A test program was conducted involving forty-five drops of liquid propellant in instrumented tanks. Biaxial, low-g accelerations were applied to the model propellant tanks during free-fall testing, and forces exerted during liquid reorientation were measured and recorded. High speed photographic records of the liquid reorientation were also made. The test data was used to verify a mechanical analog which portrays the liquid as a point mass moving on an ellipsoidal constraint surface. The mechanical analog was coded into two FORTRAN 4 digital computer programs. Results showed excellent correlation between test data and analytical predictions of reorientation forces and liquid center of mass motion, verifying the basic analytical approach.
Berry, R. L.↗
Photogrammetric analysis of Apollo 15 records, part B
The three cameras (stellar, mapping, and panoramic) together with the laser altimeter are included in the scientific instrument module bay, representing an integrated photogrammetric system. Data analysis objectives and procedure are presented, along with deformation of second generation negatives and heighting accuracy of panoramic photographs. Mapping camera photographs and stellar photography are evaluated. Rectified prints from panoramic camera photographs are produced, as well as enlarged prints from the mapping camera pictures.
Doyle, F. J.↗
The emulsion chamber technology experiment
Photographic emulsion has the unique property of recording tracks of ionizing particles with a spatial precision of 1 micron, while also being capable of deployment over detector areas of square meters or 10's of square meters. Detectors are passive, their cost to fly in Space is a fraction of that of instruments of similar collecting. A major problem in their continued use has been the labor intensiveness of data retrieval by traditional microscope methods. Two factors changing the acceptability of emulsion technology in space are the astronomical costs of flying large electronic instruments such as ionization calorimeters in Space, and the power and low cost of computers, a small revolution in the laboratory microscope data-taking. Our group at UAH made measurements of the high energy composition and spectra of cosmic rays. The Marshall group has also specialized in space radiation dosimetry. Ionization calorimeters, using alternating layers of lead and photographic emulsion, to measure particle energies up to 10(exp 15) eV were developed. Ten balloon flights were performed with them. No such calorimeters have ever flown in orbit. In the ECT program, a small emulsion chamber was developed and will be flown on the Shuttle mission OAST-2 to resolve the principal technological questions concerning space exposures. These include assessments of: (1) pre-flight and orbital exposure to background radiation, including both self-shielding and secondary particle generation; the practical limit to exposure time in space can then be determined; (2) dynamics of stack to optimize design for launch and weightlessness; and (3) thermal and vacuum constraints on emulsion performance. All these effects are cumulative and affect our ability to perform scientific measurements but cannot be adequately predicted by available methods.
Gregory, John C.↗
The geometry and physical properties of exhaust clouds generated during the static firing of S-1C and S-2 rocket engines
An experimental program was conducted during the static firing of the S-1C stage 13, 14, and 15 rocket engines and the S-2 stage 13, 14, and 15 rocket engines. The data compiled during the experimental program consisted of photographic recordings of the time-dependent growth and diffusion of the exhaust clouds, the collection of meteorological data in the ambient atmosphere, and the acquisition of data on the physical structure of the exhaust clouds which were obtained by flying instrumented aircraft through the clouds. A new technique was developed to verify the previous measurements of evaporation and entrainment of blast deflector cooling water into the cloud. The results of the experimental program indicate that at the lower altitudes the rocket exhaust cloud or plume closely resembles a free-jet type of flow. At the upper altitudes, where the cloud is approaching an equilibrium condition, structure is very similar to a natural cumulus cloud.
Forbes, R. E.↗
Determination of Scale Bar for AGHCF Metallography Data
The DOE Nuclear Energy Advanced Reactor Technologies (ART) Fast Reactor Program (FRP) has supported the development of several databases containing information on the safety performance of fast reactors, components, and fuels. This growing collection of legacy experimental data, operating data, and analysis is available online to registered users. Metallography data represents one of the most critical types of post-irradiation examination (PIE) data being collected, organized, and archived in several ART Fast Reactor Databases (https://frdb.ne.anl.gov), including the Metallic Fuels Irradiation & Physics Database (FIPD), Out-of-Pile Transient Database (OPTD), and TREAT (the Transient Reactor Test Facility) Experimental Relational Database (TREXR). These databases contain three principal sets of metallography data. The first set comprises metallography data from Experimental Breeder Reactor-II (EBR-II) and Fast Flux Test Facility (FFTF) irradiated fuel pins examined in the Hot Fuel Examination Facility (HFEF). The second set consists of metallography data from EBR-II irradiated fuel pins examined in the Alpha-Gamma Hot Cell Facility (AGHCF). The third set includes metallography data from transient-tested fuel pins (including both out-of-pile furnace tests and TREAT tests) examined in AGHCF. Since both the second and third sets were generated in AGHCF, they are governed by identical specifications. The metallography data in the databases consist of digital images scanned from either positive or negative photographic films. To analyze the microstructure of a fuel pin, a series of preparatory steps are required, including sectioning, epoxy mounting, mechanical grinding and polishing, and etching. Following sample preparation, specimens are transferred for metallographic examination. The AGHCF and HFEF metallography data were generated using optical microscopes manufactured by Leitz and Bausch and Lomb (B&L). Images were recorded on Polaroid film at preset magnifications. Magnification verification for the Leitz and B&L metallographs was conducted every two months prior to 1989 and at least every six months from 1989 through the conclusion of the IFR program. Magnifications determined from imaging of microslide standards were compared to the instrument settings for magnifications ranging from 50× to 500×. If the magnifications determined from standards deviated from the instrument settings, adjustments were made to the bellows extension until agreement was achieved. The specifications for AGHCF and HFEF legacy metallography data have been established based on available hard-copy and digital records, most of which have been incorporated into the data repositories associated with FIPD, OPTD, and TREXR. Detailed specifications including hard-copy records, digitized records, cutting diagrams and sectioning schemes, high-magnification photographs, photomosaics (composites), information tags, scale bars, and magnification verification procedures can be found in a separate report.
22 GENERAL STUDIES OF NUCLEAR REACTORS↗
The S-054 X-ray telescope experiment on Skylab
A description of the S-054 X-ray telescope on Skylab is presented with a discussion of the experimental objectives, observing program, data reduction and analysis. Some results from the Skylab mission are given. The telescope photographically records high-resolution images of the solar corona in several broadband regions of the soft X-ray spectrum. It includes an objective grating used to study the line spectrum. The spatial resolution, sensitivity, dynamic range and time resolution of the instrument were chosen to survey a wide variety of solar phenomena. It embodies improvements in design, fabrication, and calibration techniques which were developed over a ten-year period. The observing program was devised to optimize the use of the instrument and to provide studies on a wide range of time scales. The data analysis program includes morphological studies and quantitative analysis using digitized images. A small sample of the data obtained in the mission is presented to demonstrate the type of information that is available and the kinds of results that can be obtained from it.
Vaiana, G. S.↗
Orientation measurement for balloon-borne telescopes
A description is given of a simple and reliable system for recording information which in a postflight analysis will make it possible to determine the orientation of the telescope beam for any arbitrary time during the flight. The system provides a continuous in-flight photographic reference to the pole star. Questions of system design are considered and instrumental details are presented. Attention is also given to aspects of calibration and postflight analysis.
Joseph, R. D.↗
High-speed spectrograph for shock tube studies
Instrument provides information on spatial distribution of electron density of gas flow in high-performance shock tube. System permits measurement of profiles of hydrogen-alpha and -beta lines with enough spectral range to record spectral features from the near ultraviolet to the long-wavelength cutoff of photographic film.
Borucki, W. J.↗