Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHYSICAL PROPERTIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

Evaluation of Cloud Physical Properties of ECMWF Analysis and Re-Analysis (ERA-40 and ERA Interim) against CERES Tropical Deep Convective Cloud Object Observations

This study presents an approach that converts the vertical profiles of grid-averaged cloud properties from large-scale models to probability density functions (pdfs) of subgrid-cell cloud physical properties measured at satellite footprints. Cloud physical and radiative properties, rather than just cloud and precipitation occurrences, of assimilated cloud systems by the European Center for Medium-range Weather Forecasts (ECMWF) operational analysis (EOA) and ECMWF Re-Analyses (ERA-40 and ERA Interim) are validated against those obtained from Earth Observing System satellite cloud object data for January-August 1998 and March 2000 periods. These properties include ice water path (IWP), cloud-top height and temperature, cloud optical depth and solar and infrared radiative fluxes. Each cloud object, a contiguous region with similar cloud physical properties, is temporally and spatially matched with EOA and ERA-40 data. Results indicate that most pdfs of EOA and ERA-40 cloud physical and radiative properties agree with those of satellite observations of the tropical deep convective cloud-object type for the January-August 1998 period. There are, however, significant discrepancies in selected ranges of the cloud property pdfs such as the upper range of EOA cloud top height. A major discrepancy is that the dependence of the pdfs on the cloud object size for both EOA and ERA-40 is not as strong as in the observations. Modifications to the cloud parameterization in ECMWF that occurred in October 1999 eliminate the clouds near the tropopause but shift power of the pdf to lower cloud-top heights and greatly reduce the ranges of IWP and cloud optical depth pdfs. These features persist in ERA-40 due to the use of the same cloud parameterizations. The downgrade of data assimilation technique and the lack of snow water content information in ERA-40, not the coarser horizontal grid resolution, are also responsible for the disagreements with observed pdfs of cloud physical properties although the detection rates of cloud object occurrence are improved for small size categories. A possible improvement to the convective parameterization is to introduce a stronger dependence of updraft penetration heights with grid-cell dynamics. These conclusions will be rechecked using the ERA Interim data, due to recent changes in the ECMWF convective parameterization (Bechtold et al. 2004, 2008). Results from the ERA Interim will be presented at the meeting.

Xu, Kuan-Man↗
NASA NTRS1989

Viking landing sites, remote-sensing observations, and physical properties of Martian surface materials

Consideration is given to the relations between the physical properties of the surface materials at Viking landing sites, the physical properties of other Martian surfaces inferred from radar observations from earth and thermal observations from orbit, and the geological processes that formed the materials and shaped the surfaces. The radar and thermal remote-sensing signatures of the landing site surface materials are estimated and compared with the thermal and radar measurements for the entire planet. It is shown that the surface materials at the landing sites are good analogs for the materials in most of the Martian equatorial regions.

Moore, Henry J.↗
DOE OSTI2026

Effects of Recovery Conditions and Aggregation Mechanisms on the Chemical and Physical Properties of Hybrid Poplar and Corn Stover Lignins

Heterogeneity in the physical properties and processing behavior of lignins recovered from biorefining process streams can hinder their effective utilization and industrial valorization. This work investigates lignin recovery by acidification from alkaline pretreatment liquors of varying sources (corn stover and hybrid poplar), compositions, solid contents, and incubation temperatures prior to filtration. Recovered lignins were characterized for filtration performance, mass yield, chemical composition, particle size and morphology, and color. A transition temperature was identified corresponding to marked shifts in lignin physical properties and was a function of the solid content and liquor source. Filtration below this temperature yielded slow-filtering, dark, brittle lignins with smoother particle surfaces, whereas precipitation above this threshold yielded fast-filtering, lighter, powdery lignins with rougher particle surfaces. The impact of temperature and concentration on universal cluster aggregation mechanisms was proposed to explain the differences between lignin particle properties and filtration behavior.

Aggregation↗
DOE OSTI2024

Physical Properties of Hilti HIT-RE 500 V3 After Irradiation: Slant Shear, Tensile, Flexural, and Compressive

There are various applications in which epoxy adhesives may be used within hot-cell environments. These epoxies currently see limited use within hot cells since it is known that organics see degradation after small doses even as low as 50 kilogray (kGy). These losses in physical property strengths limit the use of these epoxies to non-structural applications. In modern construction, however, the use of epoxies to bond structural components such as rebar or threaded anchors is becoming increasingly prevalent. To employ these types of materials the Idaho National Laboratory (INL) has begun investigating the specific degradation properties of epoxies for use in structural applications in environments where radiation is present. Hilti HIT-RE 500 V3 is used extensively in new construction and renovation projects across the world. The INL has conducted various tests on this epoxy for low dose environments. These tests include tensile, flexural, compression, and slant shear tests following the American Society for Testing Material International (ASTM) standards D638, D790, D695, and C882/882M respectively. Two sample sets for each test were created where the baseline specimens were not irradiated, and another set was irradiated to an accumulated dose of approximately 50-60 kGy. All the samples were destructively tested and analyzed focusing on the change in physical properties, examples of these tests are shown in Figures 1-4. Tensile testing results indicate a 0.9% loss in maximum load capacity, a 0.5% loss in tensile stress at maximum load, a 1.4% loss in tensile strain at break, and a 15% decrease in modulus of elasticity. Flexural testing results display an increase in all the following: 12% in strain at maximum load, 10% in maximum load capacity, 5% in stress at maximum load, and 3% in young’s modulus. The compressive physical properties after irradiation display a 1% increase in maximum load, a 3% decrease in stress at yield, and a 5% decrease in modulus of elasticity. The maximum compressive stress saw no measurable change after irradiation. The slant shear specimens after irradiation displayed a 2% increase in maximum load capacity and maximum compressive stress. Though a structural analysis would have to be completed as is normal for building design the increases and decreases in the measured physical properties indicate that this material may be used for structural applications in low dose hot-cell environments without adhesive failure.

36 MATERIALS SCIENCE↗
NASA NTRS1973

Characterization of the mechanical and physical properties of TD-NiCr (Ni-20Cr-2ThO2) alloy sheet

Sheets of TD-NiCr processed using techniques developed to produce uniform material were tested to supply mechanical and physical property data. Two heats each of 0.025 and 0.051 cm thick sheet were tested. Mechanical properties evaluated included tensile, modulus of elasticity, Poisson's Ratio, compression, creep-rupture, creep strength, bearing strength, shear strength, sharp notch and fatigue strength. Test temperatures covered the range from ambient to 1589K. Physical properties were also studied as a function of temperature. The physical properties measured were thermal conductivity, linear thermal expansion, specific heat, total hemispherical emittance, thermal diffusivity, and electrical conductivity.

Fritz, L. J.↗
NASA NTRS1973

Aerosol physical properties from satellite horizon inversion

The feasibility is investigated of determining the physical properties of aerosols globally in the altitude region of 10 to 100 km from a satellite horizon scanning experiment. The investigation utilizes a horizon inversion technique previously developed and extended. Aerosol physical properties such as number density, size distribution, and the real and imaginary components of the index of refraction are demonstrated to be invertible in the aerosol size ranges (0.01-0.1 microns), (0.1-1.0 microns), (1.0-10 microns). Extensions of previously developed radiative transfer models and recursive inversion algorithms are displayed.

Gray, C. R.↗
NASA NTRS1990

A CO survey of regions around 34 open clusters. II - Physical properties of cataloged molecular clouds

The physical properties of the 148 molecular clouds found in a CO survey of regions around 34 young open clusters have been examined. Expressions are given for the cloud size spectrum and the mass spectrum. The mass-radius relation implies that clouds of all size larger than a few pc have about the same mean volume density. Power laws with slopes of 0.6 and 3 describe, respectively, the relations of CO linewidth and cloud mass to cloud size. The clouds are distinctly nonspherical and appear to be randomly oriented with respect to the Galactic plane. The observations can be explained by a model for molecular clouds in which clouds are ensembles of dense clumps of gas. Based on such a model, it is shown that molecular clouds are perturbed on a time scale short compared to the time required for them to reestablish virial equilibrium.

Leisawitz, D.↗
DOE OSTI2024

Tailoring physical properties of crystals through synthetic temperature control: A case study for new polymorphic NbFeT e 2 phases

Growth parameters play a significant role in the crystal quality and physical properties of layered materials. Here we present a case study on a van der Waals magnetic NbFeTe 2 material. Two different types of polymorphic NbFeTe 2 phases, synthesized at different temperatures, display significantly different behaviors in crystal symmetry, electronic structure, electrical transport, and magnetism. While the phase synthesized at low temperature showing behavior consistent with previous reports, the new phase synthesized at high temperature, has completely different physical properties, such as metallic resistivity, long-range ferromagnetic order, anomalous Hall effect, negative magnetoresistance, and distinct electronic structures. Neutron diffraction reveals out-of-plane ferromagnetism below 70 K, consistent with the electrical transport and magnetic susceptibility studies. Finally, our work suggests that simply tuning synthetic parameters in a controlled manner could be an effective route to alter the physical properties of existing materials potentially unlocking new states of matter, or even discovering new materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Using Artificial Neural Networks to Predict Physical Properties of Membrane Polymers

Membrane polymers are a promising technology for use in many challenging gas separation applications. Here, the techniques of computer-aided molecular design can be used to search through the massive molecular space of heteropolymers and develop a set of likely candidate repeat units matching specific physical property targets. However, reasonably accurate property prediction algorithms are needed, but these algorithms must be very fast in order to be combined with an optimization framework. Artificial neural networks (ANNs), a branch of machine learning, are applied in this work to predict the physical properties of polymers. All of the physical properties investigated were found to be predicted by ANNs with R 2 scores exceeding 0.82.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRSDate not supplied

Physical Properties of the Solar Atmosphere Derived from Comparison of Spectro-Polarimetric SDO/HMI Observables with 3D Radiative MHD Simulations

In this study, we compare the SDO/HMI line-of-sight observables (magnetic field, velocity, continuum intensity, and line depth) with the related physical properties for several dynamo simulation runs performed using the "StellarBox" 3D Radiative MHD code. The modeling of the Fe I 6173 A Stokes profiles is performed using the SPINOR radiative transfer code in the LTE approximation. The reproduced SDO/HMI line-of-sight pipeline is applied to the modeled spectra, and the observables are synthesized with high (numerical) and SDO/HMI (instrumental) resolutions. Correlations between the observables and the physical properties at various heights in the atmosphere are studied for a set of view angles (0, 30, 45, 60, 70, and 80 degrees away from the solar disk center). It is found that the SDO/HMI magnetic field and velocity measurements are unambiguously correlated with physical parameters at certain heights of the solar atmosphere. These heights increase from about 100 km above the photosphere for the disk center case to 300-600 km above the photosphere for the 80-degree case. The heights are found to be slightly lower in regions where stronger magnetic fields are found. The comparison of the photospheric magnetic flux and integrated continuum intensity derived from the SDO/HMI observables and high-resolution observations and spectra is discussed. The results of our study improve physics-based interpretations of the SDO/HMI observables and provide a better understanding of the physical properties of the solar atmosphere.

SMD↗